What do I need to do to allow multiple users to connect to a Server?

Hi,
What do I need to do to allow more than two people to be able to connect to a server via RDP?
I am using Server 2012 and I need 4 clients to be able to RDP in.
The clients will only be accessing the Server from our internal network while they are onsite.
Do I have to setup Licensing and what other steps do I need to do?
Thanks

Hi,
Thank you for posting in Windows Server Forum.
Yeah, agree with words of Hari. Normally by default server will allow only 2 remote connection for administrator purpose. So you want 4 users to connect you need RDS CAL to access it. As already suggested you can purchase RDS CAL (Per User or Per Device) according
to your requirement.
After installing RD License server you need to activate it first and then you can install the purchased RDS CAL.
More information:
Enabling more Remote Desktop Connections in Windows 2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/cf93b596-413b-4390-a452-acb19a4b0b14/enabling-more-remote-desktop-connections-in-windows-2012?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

I have Microsoft Office within my user name, but it is not available for the other 2 users. What do I need to do to allow them access?

I have Microsoft Office within my user name, but it is not available for the other 2 users. What do I need to do to allow them access to the software?

http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/how-do-i-ena ble-office-for-all-users-on-one-mac/38bd94cc-d26c-41c9-8471-ee87d63ebfc9?msgId=0 fbd6314-a12a-4fed-85f9-d939208095ff

I need a control which allows a user to choose from specific values (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2 fro

m a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a control like this is not available.I need a control in Labview which allows a user to choose from specific values (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2 from a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a con
trol like this is not available.

m a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a control like this is not available.> I need a control which allows a user to choose from specific values
> (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2
> from a listbox, and then change the value on the block diagram, but
> what I want is that on the subvi node itself he can enter the actual
> values, say 1, 10, 200. Does anyone know how to do this, creatively,
> since currently a control like this is not available.
>
One way of doing this is to use either a ring or enum where the strings
presented to the user are "1", "10", or whatever you like. On the
diagram, the values will be 0, 1, 2, in a compact counting sequence.
Then do an array index into a constant. If this is done more than one
place, make the control a typedef so you can keep them consistent an
d
make the index be done in a subVI. Then whenever you need this, you
drop the control and the subVI, out comes the integer, float, or
whatever it is you want to index.
Greg McKaskle

Allow multiple users access to iphoto

I would like to allow multiple users on same computer to access Iphoto files. What setting changes need to be made?
Thanks
mfandml

iPhoto: Sharing libraries among multiple users...
http://support.apple.com/kb/HT1198

How to allow multiple users login to a MAC PRO without interruption?

I have a mac pro, which runs Yosemite, (2013 module) to be used as a server. However, I have difficult to let multiple users to use the mac simultaneously.
Objective:
    One person uses the mac directly on his desktop, while the others to login remotely though VNC from PC (win 7/Linux).
    The users have their own workspace, and they will not interrupt each other.
What I tried:
    I created two mange accounts on the MAC.
    Account 1 was used to directly login on the mac desktop.
    Account 2 was used to login to the mac from a PC though VNC. (I also tried this from a Centos workstation with the Tiger VNC viewer)
Problem:
When account 2 is login, the location monitor will automatically change to that account as well. Both accounts shared exactly the same screen, mouse & keyboard actions. It is impossible to let multiple users to use the MAC pro simultaneously without interruptions.
If I use "hdiutil attach" to mount a dmg file though SSH with account 2, the folder will automatically show in the local desktop login with account 1.
Question:
I read something about the "Per-user screen sharing". It says, "You can remotely log into a Mac with any user account on that computer and control it, without interrupting someone else who might be using the computer under a different login." Is it possible to do this from a PC or Linux client?
If the problem is simply due to the poor functionality of the build-in VNC service in Yosemite, I appreciate your help to suggest some other decent VNC server for Yosemite. I know the Vine Server (OSXvnc), but I failed to install it on the mac because it is incompatible with the Yosemite.
Does the SSH is supposed to work in this way in OSX? I mean the local account can see the folder mounted by another account though SSH.
If any specific version of Yosemite is required to allow multiple users to access a mac simultaneously? Just as the win 7 professional allow only one user to login in at each time. But with the remote desktop server of windows, multiple users are able to use the same computer at the same time without any problem.
If you familiar with any of the above questions, please help. Any comments and suggestions are appreciated.
I know the best way to get the solution is to direct call the apple support. However, it is really not easy to call them. Because it always results with long waiting time and then the people pick up the phone will transfer my call to an expert who will make me to describe the problem again.
Since I'm not interested in the technique details of all the problems, it is also grateful if you would provide a direct instruction to let me setup the computer for the purpose.
Thanks you very much for your kindly help.

I cannot help with the screen sharing, although I have just tried it with a RealVNC client on an iPad and it seemed to work OK.
However on the disk showing on all users desk tops have you unchecked the "ignore ownership on this volume" check box? You can check the drives permissions with CMD i command.

How can I allow multiple users to edit a single shared iCal calendar?

Is it possible to allow multiple users to edit a single shared iCal calendar? I also want to provide different permissions to those users. Is this possible through .MAC? Is it possible on Mac OSX Server?

I would like 2 agenda synced through .Mac but it does not work.
I have 2 computers and 2 laptops. A very simple agenda with 3 calenders. Myself my partner and the office calender. I want to publish my calender and that of my partner. The office calender I would like to sync so that we can change the office calender at any location.
I set up sync only for iCall and have a .Mac account. When I change anything on any of the calenders in iCall nothing happens on any of my other locations. Even though the locations are registered as synced. I can see the sync wheel turning but at the end of it the calenders are not synced.
At this moment I fully understand the publish and unpublished calenders but have no clue what so ever what syncing does for iCall. There seems to be no functionality to it. It does not transport any calender info over .Mac. There is no visable check to see what is happening and the process of syncing is not transperent. Lots of my friends go to me for advise on Apple issues but as far as sync wether iCall or Addressbook I always tell them sync does not work and I have no clue why others have it working. I haven't met any people here in Holland either that got in working. I suppose with iCall you have to get third party software to share calenders editable calenders. Really hopeless situation, wish Apple would just have a manual stating what sync can do and what it can not. Hours wasted on this issue trying to get it to work.
Hope anyone here can help out.

Allowing multiple users on one Skype ID

I was wondering if allowing multiple users online one Skype ID is possible, I currently run a small business, where the majority of the customers use skype just for text chatting, not the call features.
I was looking to hire employees, but use the same skype thats associated with my current reputation. It also helps when I get return customers, since it'll be available to all workers.
The last 2 times I tried setting this up, my skype got locked, and I wouldn't be able to afford for it to get locked.
I was wondering if anyone had any suggestions about the feasibility of this.

Being doing this idea for years and really was hoping for more development.
Bottomline when a call comes in and either I answer the call or let my staff answer the call. Then later i can see what happened.
Unfortunity each new call is not populating outlook with an automactic new record so notes could be made.
Currently we name the client with notes on back end eg: John Smith ..wants to buy main street call back asap.
This is crazy way to make notes on incoming calls but there no was to conert to a task or an appointment.... One day .....i can only dream.

How to create a new role : Need to send notifications to multiple users.

Hi All,
I have a requirement where in I need to send notifications to multiple users
and no. of users in the list is not fixed.i.e. this builds up dynamically.
Kindly let me know how do I achieve this.
Also wanted to know where form the Workflow roles get created i.e. who inserts data into wf_roles and wf_user_roles tables. Is there any UI to create roles and associate users with them.
Thanks,

Hi,
Yes - by default all responsibilities are defined as roles in the Workflow directory. You just need to identify the role that corresponds to the responsibility (look at ORIG_SYSTEM and ORIG_SYSTEM_ID columns, IIRC) and then send the notification to the role.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Compiz starting with GDM allowing multiple users

When i start compiz after login I've got slow GDM when changing user and
white screen after second login.
So there's no way to launch compiz and support two different sessions?
Or can I start compiz together with gdm and not individually for each user?

RAGHAVENDRA HARI N wrote:
Allowing multiple users to receive Ibot in OBIEE-11g with out specifying email addresses.
How to use S A System subject area in OBIEE-11g
How to specify condition in Ibot of OBIEE-11GYou can use the SA System subject area after you set it up by following the documentation link provided below. It could be used in OBIEE Delivers which enables contact information, such as e-mail addresses to be retrieved from a database and used as delivery devices in Delivers instead of having the user's manually setup their own delivery device.
Here is the link to the documentation on how to setup SA system subject area in OBIEE 11g:
http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/sa_system.htm
You can set the condition in the condition tab which is the 3rd one I suppose.

Allowing multiple users to receive Ibot in OBIEE-11g

Allowing multiple users to receive Ibot in OBIEE-11g with out specifying email addresses.
How to use S A System subject area in OBIEE-11g
How to specify condition in Ibot of OBIEE-11G

RAGHAVENDRA HARI N wrote:
Allowing multiple users to receive Ibot in OBIEE-11g with out specifying email addresses.
How to use S A System subject area in OBIEE-11g
How to specify condition in Ibot of OBIEE-11GYou can use the SA System subject area after you set it up by following the documentation link provided below. It could be used in OBIEE Delivers which enables contact information, such as e-mail addresses to be retrieved from a database and used as delivery devices in Delivers instead of having the user's manually setup their own delivery device.
Here is the link to the documentation on how to setup SA system subject area in OBIEE 11g:
http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/sa_system.htm
You can set the condition in the condition tab which is the 3rd one I suppose.

What do i need to access my files from any internet connection

I'm a bit confused, i've found some good videos on youtube on setting up the server but can't get the file shareing to work (of course the only reason i got the server). Some have told me i need a dyns routing service, so i used machighway.com but i still could not connect to my server from any internet conection outside of my home wifi. Now i've been told that i need VPN to be able to do that. So i'm hoping that someone can help clear this up and point me in the right direction. I can connect to the server using my Mac book air over my wifi (using an airport extreme). please help, i've had this server for half a year and have yet to be able to use it for what i intended.
(i upgraded the server to OS X Mountan Lion, and upgraded the app to OS X Server)

Here's how I did it.
-Open a free account at no-ip.org
-Download their app, change your server's hostname to the hostname you selected for your brand new no-ip.org account. Ideally you'd perform this step on a clean install of the Server since changing the hostname can mess a lot of the services up.
-You'll be able to tell it's working by enabling the Websites service and visiting your new no-ip.org hostname in a web browser. You should see the default server page.
If you have follow up questions for me, I don't read this forum much but I am on reddit a lot and I'm trying to start a new subreddit for mac servers: http://reddit.com/r/macserver . Post a thread on there.

New to RDS - What do I need to set up for 3 users on 2008R2?

I need to set up an existing 2008R2 server with the RDS role so that 3 users can remote into the server and use Office applications. I've been on the phone with MSFT for 45 minutes and I think I get it, but I wanted to get a second opinion, and possible
rant....
As I understand it, I need 3 licenses for Office 2013 ProPlus in this situation.
I install Office 2013 on the server with the RDS role using the Office installer.
I register/license each User account
that will be logging in to the server (3 of them) as legitimate to use the Office 2013 installed on the server.
I do not *need* to install Office 2013 on the workstations of the three User's, but I may and not run afoul of the licensing terms.
Assuming all of that is true (and I doubt it is), I have the following questions:
Do I have to use 'volume licensing' for this, or can I just buy 3 retail copies of ProPlus?
Do I *have* to use ProPlus? I do need Outlook.
Can I use Office 365 ProPlus, and is it cheaper (up front) than the one-time perpetual license? Small Business Premium (see previous Question)?
Does the server need it's own license, meaning I need 4? If not, is there a special way I need to install Office on the server so it doesn't ask for a license?
Could a non-registered user (like a server Admin) use the Office installed on the server?
How many licenses are built into RDS? I recall hearing 2, to be used for admin purposes. So I would need to buy 3 CAL for the three Users intended in this setup?
What other questions should I have asked?!
I can't believe it's so complicated. And expensive! A quick perusal suggest a single ProPlus license is about $500! I'm sure once I have had time to digest it things will be fine, but up front, this system is really a pain in the rear.
Anyway, thanks to those brave enough to attempt to untangle this for me!

For the O365-on-RDS aspect, bad news, it's not a valid installation scenario.
You would need a Volume License edition of Office2013 to install upon RDS, because O365 only offers the Click-to-Run installable, and that can't be installed upon RDS:
http://technet.microsoft.com/en-us/library/ee624360.aspx#Table
http://community.office365.com/en-us/forums/156/t/138757.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

What profile option need to be set to deny user from login to diff Machine

Hello all,
What profile option do i need to be set to deny user access from login on to different machine. I mean a user that logon to Machine A if he/she tries to logon to machine B. Machine A must be disconnected telling him/her that he/she had already logon to a machine before.

Please see these threads.
Is It Possible To Block Multiple oracle application logging??? (11.5.10.2)
Is It Possible To Block Multiple oracle application logging??? (11.5.10.2)
restricting session in Oracle application
restricting session in Oracle application
Is it possible to limit the user to one session?
Is it possible to limit the user to one session?
Thanks,
Hussein

ChaRM Allowing Multiple Users in the Same CD to be in Edit Mode

We have upgraded to ChaRM 7.1 but are still using CRMD_ORDER and Transaction Monitor CRM_DNO_MONITOR. When the Developer completes her change, populates the Current Processor with the Change Manager and clicks Save she keeps the CD open in Edit Mode. The Change Manager is able to open the same CD and click Edit without any warning on the bottom of the window saying it is being processed by another user.
When there is a hand off to the next Current Processor, both the previous and current user are able to be in edit mode. I don't recall this being allowed before. Has this changed with 7.1?

DGS wrote:
I have a global temp table (GTT) defined with 'on commit preserve rows'. This table is accessed via a web page using ASP.NET. The application was designed so that every one that accessed the web page could only see their data in the GTT.
We have just realized that the GTT doesn't appear to be empty as new web users use the application. I believe it has something to do with how ASP is connecting to the database. I only see one entry in the V$SESSION view even when multiple users are using the web page. I believe this single V$SESSION entry is causing only one GTT to be available at a time. Each user is inserting into / selecting out of the same GTT and their results are wrong.
I'm the back end Oracle developer at this place and I'm having difficulty translating this issue to the front end ASP team. When this web page is accessed, I need it to start a new session, not reuse an existing session. I want to keep the same connection, but just start a new session... Now I'm losing it.. Like I said, I'm the back end guy and all this web/connection/pooling front end stuff is magic to me.
The GTT isn't going to work unless we get new sessions. How do we do this?
Thanks!You may want to try changing your GTT to 'ON COMMIT DELETE ROWS' and have the .Net app use a transaction object.
We had a similar problem and I found help in the following thread:
Re: Global temp table problem w/ODP?
All the best.

Security Restriction: allow a user to connect only from a specified IP addr

Hello all,
Is it possible to add the following security restricition?
Allow a specified user to connect to an Oracle Database only from a specified IP.
Thanks,
Andrea

It's not enough.
The configuration you suggested would limit all users connections from specififed IP addresses.
I need to limit the connection from a specified IP address only for a specified user.
Thanks,
Andrea

What do I need to do to allow multiple users to connect to a Server?

Similar Messages

Maybe you are looking for