What do iostat hard errors and transport errors mean?

Can anyone give me some insight into the following output from iostat
-bash-3.00# iostat -En c1t5d0
c1t5d0 Soft Errors: 0 Hard Errors: 5 Transport Errors: 8
Vendor: FUJITSU Product: MAN3735F SUN72G Revision: 0704 Serial No: 0305V94190
Size: 73.41GB <73407865856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 1 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
Obviously there are 5 hard errors and 8 transport errors, but what does that normally mean? Reseat the drive to fix? Run fsck? How many errors are acceptable before needing to become concerned?

Hi.
This counters - Solaris realated. It's not permanent for device.
After reboot - all this error counters will be reset to 0.
It's not normal that this counters not 0, but it's not meaning that device is bad or should be replaced.
No Device: 1 - So - possible device was removed and reinserting, may be transport porblem.
This disc - FC-AL. So it may be problem on other device in loop.
Is it interanl or external disk? What server ?
Soft, Hard, Transport - it's level of error when operating with this device. For more inforamtion need
analyze /var/adm/messages.
Where fixed wha error happens and more detail information.
Regards.

Similar Messages

  • Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore

    Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore - On my iPad the only thing I see is a connector cord to iTunes and nothing else.
    What can I do  ???

    Same issue for me, recently I started having issues with apps no longer being able to access my Facebook account. But the iPad Facebook account settings will not accept my password, even though the Facebook app and Safari can access my account fine. The only significant events I recall that have occurred that may have triggered this have been that via my Facebook account I killed off a lot of so called authorised connections and I changed my user name, but still have the same email address and password.
    I have tried just about every solution put forward on the net, short of a factory restore, back to new, on my iPad.
    I have also; deleted my iCloud account, deleted the Facebook app and account, deleted Safari data.
    One would think that after I have deleted my account from the iPad that it would ask for both username/email address and password, but it only asks for password, so the username is still stored somewhere that I am unable to delete.
    I also see that no one seems to have been able to get an answer from Apple. So I'm guessing they have absolutely no idea themselves.
    I am hesitant to put my username on Facebook back to what it was as Facebook only give you a few chances to change your username, then you are locked.
    I have iOS 7.1.1 installed.
    I did have a lot of respect for Apple and their devices as they just worked, but they are becoming tarnished by ignoring what seems to be a growing issue.

  • What is a hard boot and will it fix my grainy photos when I take flash photographs with my iPhone 5 in the deep dark?

    What is a hard boot and will it fix my grainy photos when I take flash photographs with my iPhone 5 in the deep dark?
    Someone said a hard boot fixed the problem above .....when I go outside in the dark and take a flash photograph the photograph is all grainy and dark something is wrong is a hard boot where you hold the power and the home button down the same time is that safe will it fix the problem is it a hardware or software issue please help i've had my phone for over year people at the Apple store and other people told me it will be fixed in a software update but now it's getting serious I hope they'll replace my phone if it's a hardware issue something is wrong and I am angry please help if you can

    The hard boot that I'm referring to in my case is relating to the iPhone not a Mac… five Years ago with my first iPhone three GS I believe it was someone at the Apple store told me have you tried a hard boot hard boot with my iPhone is where you hold the power button and the home button down at the same time for like 10 seconds or whatever and it shuts the phone off or reboots the phone
    let's say you have the phone on and you do that procedure that's what they referred to as a hard boot when it comes to the iPhone and I wanted to know if it was safe for the iPhone five to do a hard boot I did it with my 3GS with no problems
    I'm just trying to be able to take a photograph of something in the deep dark from 10 to 15 feet away and have it not look grainy and dark some have said and other discussions that it was a hardware problem and they have their phones replaced other said it was a software problem but you're saying and everyone else saying it's just because the flash and the sensor is too small

  • CRC errors and input errors on Te 1/2 of Cisco WS-C3560X-48 switch

    Hi All,
    I am observing CRC errors and input errors on one of the Te1/2 interface of WS-C3560X-48 Cisco switch. I have not observed any CRC errors or input errors on the connected interface at other end. Can you please let us know whether the issue is with cable or SFP module.
     Effected interface:
    TenGigabitEthernet1/2 is up, line protocol is up (connected)
      Hardware is Ten Gigabit Ethernet, address is f866.f243.e6b6 (bia f866.f243.e6b6)
      Description: *** MAN-SW1B***
      MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
         reliability 254/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive not set
      Full-duplex, 10Gb/s, link type is auto, media type is SFP-10GBase-SR
      input flow-control is off, output flow-control is unsupported
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 00:00:00, output 00:00:00, output hang never
      Last clearing of "show interface" counters 3w5d
      Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 29000 bits/sec, 30 packets/sec
      5 minute output rate 45000 bits/sec, 37 packets/sec
         68905128 packets input, 8272036576 bytes, 0 no buffer
         Received 68904979 broadcasts (68812046 multicasts)
         0 runts, 0 giants, 0 throttles
         146170 input errors, 130065 CRC, 0 frame, 0 overrun, 0 ignored
         0 watchdog, 68812046 multicast, 0 pause input
         0 input packets with dribble condition detected
         83524620 packets output, 12642123488 bytes, 0 underruns
         0 output errors, 0 collisions, 1 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier, 0 PAUSE output
         0 output buffer failures, 0 output buffers swapped out
    Other end.
    TenGigabitEthernet1/4 is up, line protocol is up (connected)
      Hardware is Ten Gigabit Ethernet Port, address is 503d.e53b.9703 (bia 503d.e53                                                                                        b.9703)
      Description: *** DMZ-SW1B ***
      MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, 10Gb/s, link type is auto, media type is 10GBase-SR
      input flow-control is on, output flow-control is off
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 00:00:00, output never, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 32000 bits/sec, 27 packets/sec
      5 minute output rate 21000 bits/sec, 22 packets/sec
         918379921 packets input, 312586470396 bytes, 0 no buffer
         Received 881142868 broadcasts (875016400 multicasts)
         0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 input packets with dribble condition detected
         463132111 packets output, 240865283601 bytes, 0 underruns
         0 output errors, 0 collisions, 1 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier
         0 output buffer failures, 0 output buffers swapped out

    When there are more than two members in a cluster (stack), the Gigabit interface operates at half-duplex. Since collisions can result at half-duplex, some CRCs errors are normal.

  • CRC Error and input Error how can fix these

    FastEthernet0/13 is up, line protocol is up
      Hardware is Fast Ethernet, address is 0004.4d27.66cd (bia 0004.4d27.66cd)
      Description: EDL-P-Box-NO-4
      MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
         reliability 250/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive not set
      Auto-duplex (Full), Auto Speed (100), 100BaseTX/FX
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 18:52:43, output 00:00:01, output hang never
      Last clearing of "show interface" counters never
      Queueing strategy: fifo
      Output queue 0/40, 0 drops; input queue 0/75, 0 drops
      5 minute input rate 12000 bits/sec, 6 packets/sec
      5 minute output rate 24000 bits/sec, 6 packets/sec
         14488019 packets input, 2783320210 bytes
         Received 345346 broadcasts, 0 runts, 0 giants, 0 throttles
         261028 input errors, 259429 CRC, 1599 frame, 0 overrun, 0 ignored
         0 watchdog, 84207 multicast
         0 input packets with dribble condition detected
         19658279 packets output, 3529106068 bytes, 0 underruns
         0 output errors, 0 collisions, 1 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier
         0 output buffer failures, 0 output buffers swapped out
    PAD-8-1-10.179#cle
    v

    Hi,
    Check out the below explanation for CRC error and farme error and few useful links to trouble shoot these type of problems
      The CRC error rate is 1.75915% (greater than 1 in a million packets),
      and the collision rate is less than 0.1%.
      This can indicate excessive noise or transmission problems on the LAN or the LAN
      bus itself. A high number of CRCs is usually the result of collisions or a station
      transmitting bad data.
      TRY THIS: Check cables to determine whether any are damaged. If 100BaseTX is being
      used, ensure Category 5 cabling is being used and not another type, such as Category
      3.
      There have been 1599 'frame errors' reported.
      This indicates the number of packets received incorrectly, having a CRC error
      and a non-integer number of octets. On a LAN, this is usually the result of collisions
      or a malfunctioning Ethernet device.
    TRY THIS: Monitor the level of frame errors over time. If they are increasing,
      try swapping interfaces and or ports to identify the problem.
    http://www.cisco.com/en/US/customer/products/hw/modules/ps2033/products_tech_note09186a008009446d.shtml
    http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html
    http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html
    Hope that helps out your query !!
    Regards
    Ganesh.H

  • What does a question mark and i file mean on my macbook pro

    what does a question mark and i file mean on my macbook pro when i turn it on?

    To be more specific, the computer is not finding a valid system when it starts up. This may result from the hard drive's physical mechanism failing, or the system on the drive being corrupted in some way.
    Repairing permissions is not likely to fix this issue. Instead I would suggest booting from the system install DVD, running Disk Utility, selecting your hard drive's partition and select *Repair Disk*.
    Note: if the hard drive does not show up in Disk Utility at all, it is dead and will need to be replaced. Contact Apple (800-275-2273 in the USA) and have them set up warranty service, or carry the MacBook in to an Apple retail store to have it fixed. Be sure to [make an appointment|http://www.apple.com/retail] first you you may wait a long time to speak to a Mac Genius.
    If Repair Disk finds any problems and is able to correct them, you may be able to restart and everything be okay. If it is unable to correct the problems, you will need to erase and restore your hard drive.
    If Repair Disk does not find any problems, I would suggest an Archive and Install as described in [this article|http://support.apple.com/kb/HT1710].
    Best of luck.

  • Hard drive and critical error messages

    Hello, I have suddenly rec'd numerous hard drive errors "hard drive doesn't respond to system commands" and critical error messages "damaged hard drive clusters detected. private data is at risk."    "system has detected a problem with one or more installed IDE/SATA hard disks" along with other error messages.  I have a toshiba satellite A505 over a year old and never had a problem until now.  Was just surfing the web on a retail site and started getting all these pop-ups. desktop is missing most icons, favorite list gone.  not computer savvy when it somes to figuring the error messages out.  Any help appreciated.  Should I take it in somewhere to get fixed?  Please help.
    Thank You.

    not computer savvy when it somes to figuring the error messages out. ... Should I take it in somewhere to get fixed? 
    Yes, Katy. Be sure to back up all your important files. The machine you get back will most likely have all of your pictures, Xmas cards, favorites, contacts and so forth missing.
       Locate a Toshiba Service Center
    -Jerry

  • Replaced hard drive and getting error

    start up failed hard disk smart 0301
     and quick scan 0303
    i have everything backed up on my external.... this is the 2nd time i replaced the hdd... the 1st time it was under warenty 
    i have a hp pavillion dv5 -1251nr
    i also have the op cd.... it was running vista.... help because i made the mistake of getting a sony netbook and its done for... my only chance to have a working pc is this hp.... and i am going insane without one

    Contact the vendor of the new hard drive and request an RMA. Sometimes hard disks are received and the fail right out of the box. The manufacturers and vendors are aware of that. That is always a great reason to keep a receipt. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

    I am learining to build CAF apps in Developer Studio in NW CE 7.1.  Here are my steps and the errors I am getting:
    Open Developer Studio
    Switch to the CA perspective
    File->New->Project
    Choose Development Component under Development Infrastructure
    Press Next
    Choose Composite Application under sap.com
    Choose MyComponents[demo.sap.com] under 'Local Development'
    Vendor: demo.sap.com
    Name: carpool
    Caption: Car Pool
    Language: American English
    Domain: SAP-xApps
    Support Component: CAF-APP (typed in, not chosen)
    Press Finish
    The following error appears:
    Status ERROR
    Plugin : com.sap.ide.metamodel.core.services.eclipse
    code=0
    Internal error
       Plugin name: Metamodel Core
       Internal error  : com.sap.ide.metamodel.core.services.eclipse
       Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
       Method     : computeIdeJarProperties
       Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
       Exception  : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    at java.util.zip.ZipFile.open(Native Method)
    at java.util.zip.ZipFile.<init>(ZipFile.java:203)
    at java.util.jar.JarFile.<init>(JarFile.java:132)
    at java.util.jar.JarFile.<init>(JarFile.java:70)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
    at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
    at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
    at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
    at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
    at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
    at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
    at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install. 
    Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
    The deployment of the archive failed with an exception!
    ([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
    Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
    occurred while sorting the deployment batch items regarding the
    dependencies.;nested exception is:
    com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
    denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
    found for the following deployment items:
    1. Component: name:'carpool~ear',vendor:'my.company',location:
    'localDevelopment',version:'20080501110329',software type: 'J2EE',
    dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
    'cafcoreear',vendor:'sap.com']
    Unresolved dependency:
    name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Unresolved dependency:
    name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Please check the error log for further informations.
    Again, this looks like I am missing some components.
    Any assistance is greatly appreciated.
    TB

    Further developments:  As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time.  In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated.  Does anyone know how I can change the lookup directory for this dependency (or any dependency)? 
    Thanks,
    TB

  • Handle error and skip error in BDC

    HI experts,
    I have done a BDC call transaction method for t.code XK02.
    During the uploading i am getting a lot hidden errors which my uploading getting stop.
    I have done a lot checking but still some new problems coming during uploading.
    Example :
    Sometimes the user did not maintain payment terms and ETC.
    Is it possible for me to skip if the there is any error hit during the uploading and it should skip to the
    next data to upload.
    I hope it is clear.
    Thank you in advanced.
    regards.
    saravannan.s

    Hi,
    If you are trying to create the multiple vendors using call transaction you'll be using a loop for the CALL TRANSACTION.
    So, you can do this, when you are uploading data into the BDCDATA structure after you upload the data you'll be calling the CALL TRANSACTION statement. So, call this statement using mode 'N' and store the errors in an internal table type BDCMSGCOLL.if any error comes then you'll get the error stored into this table and loop continues for the next vendor creation data.
    finally you'll get the error and success of the vendors into the internal table type BDCMSGCOLL.
    P.S. use the call transaction statement like this
    CALL TRANSACTION 'XK02' USING T_BDCDATA MODE 'N' MESSAGES INTO T_BDCMSGCOLL.
    Thanks&Regards
    Sarves

  • Show error and test error

    I have used oracle 9.2 for 3 months. I install oralce client 9.0 in my computer. when I write stored procedure. I used SQL Plus to compile. We use package to wrap a store proceure in sql file. we use ref cursor variable to reture record sets to client because we use oledb and ado to acecess oracle. I don't know the reason that my computer didn't worked well yesterday.
    1. in sql plus, all variable changed to char when I made test in sql plus. I used following statement to test:
    variable c ref cursor
    exec package.procedure(:c, variable1);
    print c
    It has error messages: wrong type or numbers in the arguments in calling stored procedure. I checked variable, c changed to char not ref cursor. later, check others, all variable changed to char. very strange. If I defined variable like this: variable c char(20), wrong, like this: variable c char, correct, very strange.
    2. when I compile(in SQL Plus), use statement: @package, If stored procedure has error, use show errors command to display error, cann't display the error. This is first time I met this kind of error.
    In addition, If I connect to other database which is old database we don't use now in sql plus. everythings are ok. I hope somebody could give me reply.
    Thanks.
    My email: [email protected]
    Jerry Mu

    That would be because the PXI 5124 is a digitizer not a analog input device.  You need to use the NI SCOPE driver not NI DAQmx
    Jeff

  • Show errors and test error

    I have used oracle 9.2 for 3 months. I install oralce client 9.0 in my computer. when I write stored procedure. I used SQL Plus to compile. We use package to wrap a store proceure in sql file. we use ref cursor variable to reture record sets to client because we use oledb and ado to acecess oracle. I don't know the reason that my computer didn't worked well yesterday.
    1. in sql plus, all variable changed to char when I made test in sql plus. I used following statement to test:
    variable c ref cursor
    exec package.procedure(:c, variable1);
    print c
    It has error messages: wrong type or numbers in the arguments in calling stored procedure. I checked variable, c changed to char not ref cursor. later, check others, all variable changed to char. very strange. If I defined variable like this: variable c char(20), wrong, like this: variable c char, correct, very strange.
    2. when I compile(in SQL Plus), use statement: @package, If stored procedure has error, use show errors command to display error, cann't display the error. This is first time I met this kind of error.
    In addition, If I connect to other database which is old database we don't use now in sql plus. everythings are ok. I hope somebody could give me reply.
    Thanks.
    My email: [email protected]
    Jerry Mu

    Hi,
    A very common cause for ORA-00942 in a stored procedure (here I'm including packages and functions) is that you have privileges only through a role. Roles don't count in stored procedures if they are compiled with the default "AUTHID DEFINER". Either
    (1) have whatever privileges you need (e.g. "INSERT ON data_quality_report" or "SELECT ON s_org_ext") granted directly to you (the package owner), or to the pseudo-user PUBLIC, and not merely to some role that you have, or
    (2) create the package in the same schema as the tables, or
    (3) create the package with "invoker's rights", like this
    CREATE OR REPLACE PACKAGE data_quality_report_p
    AUTHID CURRENT_USER       -- Added
    AS
        FUNCTION pull_data ...'AUTHID CURRENT_USER" goes right before the keyword "IS" (or "AS") in the package spec; you don't have to do anything to the package body.
    However, if you do this, then whoever runs the package will need to have those privileges, in addition to EXECUTE privileges on the package. Privileges granted through a role will be okay.
    Usually, (1) is the best solution. Have the table owner(s), or someone with the proper authority, grant privileges directly to you.
    By the way, there's no point in having an ORDER BY clause in a sub-query like you're doing, and there's no point in having ORDER BY in an INSERT statement. It's not causing the ORA_00932 error (or any other error), it's just wasting resources.
    Edited by: Frank Kulash on Mar 23, 2011 4:02 PM
    Change DEFINER to CURRENT_USER in a couple of places. (Bad mistake!)

  • No internet connection detected error and Login errors

    I'm on Sony Xperia SP and I have run into two problems lately, one being that Spotify says I have no internet connection (no internet connection detected error) and I've recently bought premium so I'm wasting my money because of this. I've tried clean reinstall and it still failed, this now brings me to my second problem. I also get long waits while waiting to log in and a lot of the time it never logs in, I've only logged out to first the first error and it just creates more problems. I've tried both Facebook and regular logins and none have worked. I know a lot of the community has either previously or is currently receiving this problem so a update fix would be great!
    P.S. Login for my ps4 and PC work fine so it's a problem with the app itself.

    Just a correction, I believe the error was actually no internet connection available but because I can't even login I'm not sure!

  • " L-EC uncorrectable error " and " Multiplexer error " in both Toast & iDVD

    Hi there ,
    I've had issues with burning DVDs for ages and have a 3" stack of irridescent coasters to show for it .
    I recently stopped getting the error msg , "Multiplexer error : failed to write etc." after deleting the encoded asstes from Advanced tab and then I started getting this L-EC Uncorrectable jazz in both iDVD and Toast (even when burned at 1x) .
    There HAS to be some file somewhere throwing off these programmes . I also wonder why the programmers write error messages decipherable only to those with a Phd. in computer science . Besides , if it's all just 1s and 0s , how is it "uncorrectable" ? I CAN FIX ANYTHING !!
    Thanks for your time ,
    Edmund

    +I started getting this L-EC Uncorrectable+
    I've never heard of that...
    +I generally leave the room on tip toes once the burning process has started .+
    Always a good strategy.
    Have you created a new User and tried burning from that User?

  • Hard Drive and RAM errors

    I have a 2010 macbook pro (unibody design). I bought it on craigslist to fix and it needed a HDD and RAM. I purchased DDR3 RAM for it and sometimes it beeps 3 times during POST and sometimes it boots up fine. I m running Snow Leopard (10.6.8) so I downloaded the mountain lion installer from the app store. When I click on the disk "Macintosh HD" to install it, i says the disk has "S.M.A.R.T. errors-the disk has a hardware problem that can't be repaired". The disk installed snow leopard off my CD and it worked fine in the PC that I took it from before I formatted it. Also sometimes when I pick up the laptop, It will shut down and not turn back on! Does anybody have any idea what is wrong with my computer? I am trying to fix it up to sell it but it is not letting me install mountain lion. Thank you!

    It Shows A Tonne Of "SAM Multimedia" Errors
    Do you have Symantec Antivirus for Macintosh (SAM) installed? If so, it's likely your troublemaker if, as the others have pointed out, you really have the proper install disks. Get rid of SAM--it does more harm than good.
    You'll probably have to boot from a system fisk to get access to SAM and neuter it enough for removal. Google this:
    symantec antivirus removal tool mac
    You'll find a tonne of sites that have removal instructions.

Maybe you are looking for

  • Streaming from time capsule.

    My Apple TV 2 connected directly to my 4th generation Time Capsule and file sharing is enabled. My iMac is also directly connected to this router/TC and all of my movies reside on it's internal disk. When my iMac is off and/or in sleep mode and I try

  • Ora-12154 when trying to connect to database from fortran application

    I am trying to connect to database and run an simple select query to a table(without any where clause) using pro*fortran code. the connect strng is like exec sql connect :uidpwd where uidpwd = username/password@SID SID and tnsnames connect string are

  • Repos create error-Urgent

    Hi hussein; I need your help. I have 10.2.0.4 database on linux cluster system. When flow those steps: drop user sysman cascade; drop role MGMT_USER; drop user MGMT_VIEW cascade; drop public synonym MGMT_TARGET_BLACKOUTS; drop public synonym SETEMVIE

  • How to reposition subtitles in Quicktime?

    Hello community, I am wondering if there is a way to reposition subtitles in Quicktime player and then re-export as an MP4 file for the iPad.  Currently the subtitles appear at the bottom of the screen, and I want them to appear at the top.  Does any

  • Appending alpha transparency swatches to a CLUT

    I have a 160 swatch color table I generated in PS and I'd like to append some alpha transparency values to it for PNG8 processing. In Fireworks CS4 I've loaded up a test image, successfully loaded in the .act file I exported from PS and then selected