What do you do when you turn ipod touch on and the apple apears and stays on wont turn off
what do you do when you turn your ipod touch on and just the apple appears wont shut off
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
Help, my ipod touch froze up, it showes the apple icon only, tried to restore and download but nothing.
Try here:
iOS: Not responding or does not turn on -
So my Ipod will no longer turn on. i leave it on my Ihome and nothing happens. whenever i try to turn it on i get the Apple logo and then it dies and says i should charge it, so i do and it does it again. What does this mean? is my battery totally dead? please i really need help
Did you try to charge it using the adapter or your computer?
If you can, let it charge for about 15min, then connect in recovery mode, described in this article:
iOS: Unable to update or restore
If still not luck, your battery might have to be replaced:
Apple - Support - Service Answer Center -
I turned my Ipad off and when I tried to turn it back on, only the apple displays and it will not go past that. What can I do to get it to come back on? It won't acknowledge it when I plug it in either.
I'm glad it solved your problem
-
My ipod is stuck on the apple logo and won't let me connect to itunes to reset it what do i do?
My ipod is stuck on the apple logo and won't let me connect to itunes to reset it what do i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore -
My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?
Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?
Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build". -
My iPhone 3Gs has frozen and I can't do anything except turn it off by hard boot. When I plug it in, I have the apple icon and that is all. It was at 43 percent battery life when it happened and my Twitter app was giving me problems. Thoughts?
Put it in recovery mode and restore it as described here: http://support.apple.com/kb/ht1808.
-
My ipad wont turn on it stops at the apple logo and i get little white wording that says this device is not using requires_boot_connect_on_reset. Not sure what is going on. also says appleBCMWLANBusInterfaceHTSIC reset chip
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
I was updating my Ipad2 and when it was done it went to the apple logo and wont leave that screen it also will not charge. Ive tried resetting and it turns off for a second then come right back to the Apple screen.
Try and force iPad into Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
How do I reinstall an older version of the software on my IPod touch? Installed the latest update and now it no longer works in my car.
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback. -
My first generation ipod touch just showes the apple on the screen. It seems frozen. Can someone tell me how to fix this?
Try a hard reset and go from there.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
Is there a possible way to get a refurbished red ipod touch 5 on the apple store?
Is there a possible way to get a refurbished red ipod touch 5 on the apple store?
online would be easier
check this link
http://store.apple.com/us/browse/home/specialdeals/ipod
Peace, Clyde
Maybe you are looking for
-
There are several people who might want to use Thunderbird on a work computer but I don't like how everyone's email files are open to public view. It looks like anyone can see emails without having to login to another person's account.
-
Openoffice won't recognize keyboard
Greetings. I've downloaded the drivers for my MS ergonomic keyboard. It seems to work in everything but in openoffice. Any ideas? Thanks.
-
How to hide a keyfigure in query(In wad)
Hi everyone Iam new to WAD. I have an contains chart and table . In that chart graph, x is values of 3 figures. y axis is values of regarding x axis. y axis contains the values from 0 t0 600 x axis contains 3 keyfigures no o
-
Different program file associations in GNOME Trash folder
So, for example, I've set up GNOME to run all *.avi files with mplayer. Now if I delete an *.avi file to a Trash folder and run it from there Banshee is used as a default associated program. In fact, mplayer is not in the "Open With..." sub-menu (onl
-
How to analyze program performance
On solaris, I have following stuff. Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_01-b01) Java HotSpot(TM) Client VM (build 1.4.1_01-b01, mixed mode). 1. To analyse a program, I use "java -d64 -Xms1024m -Xmx7168m -XX:+UseLWPSynchroniz