What does it take to find a simple ringtone to load onto my phone without re-inventing the wheel?

what does it take to find a simple ringtone to load onto my phone without re-inventing the wheel?

you could use a free ringtone app or
RINGTONE
This how to make ring tones for your iPhone:
Choose the desired song from you library
Do a secondary click on your song if you are using a MAC (right click for PC)
Click "Get Info"
Go to Options tab
Set Start Time and Stop Time, some iOS only allow for a 30 sec duration for ringtones, then click OK
Do secondary click (right click for PC) to your selected song
Click "Create AAC Version", new song from your selected will added to your library (short one)
Do secondary click (right click for PC) to your short one (new song)
Click "Show in Finder"
Rename file *.m4a to *.m4r, click "use *.m4r"
Drag the file to library, for the first time it would automatically add your library with new folder "Tones" under Apps folder
Open the ring tones in the Tones folder of your library than drag it to your iPhone and your ringtone also would be automatically added "Tones" folder.
Last but not least, set the ring tone in your iPhone under the "Setting-Sound"
For information on how to make ringtones read http://www.ehow.com/how_2160460_custom-iphone-ringtones-free.html
Or
http://www.demogeek.com/2009/07/31/how-to-add-custom-ringtones-to-your-iphone/

Similar Messages

  • What does it take to get a simple Return Address label from HP?

    Yes, I have a defective printer. I got the replacement printer the other day. I was told I had 15 days to return the defective printer back to HP. They gave me an e-choice card to use to buy the replacement printer online. I received the replacement printer on Thursday. Well the last few days have been a joke. I contacted online chat support and the guy told me that I would be getting an email with the return address label within 24 hours. That was Thursday and I never got it. So yesterday I talked to someone on the phone. After 15 minutes I was told I would be getting and email within 24 hours with the return address label. Well guess what that never happened. What a nightmare it has been dealing with this defective printer for the last week. I won't get into what happened before the return address label situation. What the heck do I do without a return address label? I am not paying to ship it back to HP. If I don't send the defective printer back within 15 days my credit card will get charged for the replacement printer I got. It is like pulling your hair out to get anywhere with HP. I am about sick of it.
    This question was solved.
    View Solution.

    Hey JoeSchmoe
    See the note I sent you on  this we'll make sure this gets taken care of.
    Thanks!
    DaniW
    HP Forum Admin
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • What does it take to make "find me" work

    what does it take to make "find me" work on a mac mini.
    there are 3 users. Would I need to make an apple ID for the administrator.
    If it gets stolen, I can track it down.

    Yes, system preferences>iCloud> only thing shows up is find my iphone.
    I think I found the problem. even though it only list >>>>iPhone<<<<, it still found my "laptop" when I clicked on it.
    As long as I have wifi turned on is the trick I think.
    Thanks so much!!!

  • What does it take to get my service cancelled?

    I am trying to find out what it will take to get my account cancelled... I called more than a week in advance of my move to set up the cancellation of my FIOS home service and was assured that was all I needed to do; I would receive my final bill in the mail. However, a week after I moved, my account was charged and my autopay paid my bill of nearly $200 for services this month in a home I no longer live in, for an account that should no longer be active. I called and spoke with no fewer than 12 agents over that week, including someone who after 43 minutes of being passed around HUNG UP on me! Finally I spoke with someone who was helpful and said my account was deactivated, and in about 14 business days I should get a refund check in the mail. Well, three weeks later, my account has still not been cancelled and I have not gotten my refund! I just called again and spoke with an agent who told me he couldn't help me and I needed to call back another office on Monday. It has been nearly a month since I moved and this account was supposed to be cancelled and I still cannot get anyone to just stop the account! What does it take at Verizon to end my service??? 

    megan723,
    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".  You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information.  This should be checked on a frequent basis  as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • What does it take to get an app on the Ovi store?

    What does it take to get an app on the ovi store?  There are so many apps available that are not included in the ovi store.... like "s60spoton"  It allows you to use your cameras flash as a flash light! I've been wanting this forever.  If this app was easily available on the Ovi store, I would have been able to find it easily... but it was linked to me in a forum. 
    Why are there so many useful apps not cataloged in the Ovi store? 

    It's the maker of an apps responsibility to get it listed on the store so if it's not on there it's because the maker hasn't put it there.
    Nokia cannot put apps on the store without the makers consent.
    Only the maker/publisher of an app can tell you why their app isn't on the store. It may be for financial reasons, legal reasons, licensing issues, piracy concerns or they may just have ceased development and moved on.
    The ovi store isn't the only source of applications and some developers prefer to use independant sites like www.getjar.com instead.

  • What does it take

    Hey guys
    I have iCaht AV 2.1 and a Powerbook g4 etc etc and I am trying to set up a chat with my Dad in Australia on an IBM thinkpad running Windows XP and AIM Trillion or whatever it is.
    What does it take to ACTUALLY have a 2-way Video chat coz NOTHING we are doing is working.... I have read REAMS of stuff on this forum - Ralph has established my computer can actually recieve and send both video and audio... but it just will NOT work. What is the BEST modem and broadband provider here in the UK and in Australia???
    What does it take to actually make it work???
    If nothing works - I want my money back from buying a completely USELESS iSight to do this..... It would be easier to book satellite time and use a flyaway kit complete with crews either end than to try to use this to have 2-ways......
    AAARRRRRGGGGGHHHHHHHHHH!!!!!!!!!!!
    G4 PowerBook 1.25gHz   Mac OS X (10.3.9)  

    Among the reams, have you looked at Mac Video Chat with PCs?
    Both of you should test with others. You can find some robot ("Autoresponder") and human Buddy Names for iChat Test here if you need them. Testing will help you find whose system needs the most attention.
    Since you have now apparently connected with Ralph, it seems your computer can connect. Has your Dad tried others? Perhaps the problem is at Dad's end. If so, the list of things for the PC to check in my link above should be helpful.
    Check your Broadband Speed. Some Australian broadband can be on the slow side. Therefore, if your Dad already subscribes to the maximum bandwidth that is available from his Australian ISP, he should be particularly careful that his AIM "Video Quality" is not set too high (as explained in the "Mac Video Chat with PCs" link.)

  • What does it take to build smart card applications?

    Just out of interest I was wondering what does it take to build smart card applications:
    - Can I do it at home with my PC or do I have to have access to expensive hardware?
    - How difficult is it to master given that I do it on my own with no help. Does it involve a lot of hardware issues?
    - If hardware is required (a smart card and a cable connection), where do I get it and how much does it cost?

    Let me rephrase my question.
    I understand that the deployment process may not be so easy. That does not disturb me.
    I just want to know whether I'll experience hardware probelms. If reading/writing to the card involves putting it inside and taking it outside from the device just like a floppy disk without any complications, then I don't have any worries.
    By the way, does the reader device is used for both reading AND writing?

  • Encore: what does it take to get an input legal?

    I know this is a bit off topic from Premiere SDK but since there is no Encore (highly technical) forum I thought it best to post here instead of emailing Zac directly (so that others may learn the answer).
    My question is this:
         Specifically, what does it take for Encore to NOT transcode an input video file for DVD (mpeg2) or BluRay (mpeg4) destination?
    thx.

    Encore uses the Sonic HDMV SDK for Blu-Ray support. Below are the video formats supported by Encore:
    Resolution
    Display Aspect Ratio
    FPS
    Scan Mode
    TV Standard
    1920 × 1080
    16x9
    29.97
    Interlaced
    NTSC
    1920 × 1080
    16x9
    25
    Interlaced
    PAL
    1920 × 1080
    16x9
    24
    Progressive
    NTSC, PAL
    1920 × 1080
    16x9
    23.976
    Progressive
    NTSC, PAL
    1440 × 1080
    16x9
    29.97
    Interlaced
    NTSC
    1440 × 1080
    16x9
    25
    Interlaced
    PAL
    1440 × 1080
    16x9
    24
    Progressive
    NTSC, PAL
    1440 × 1080
    16x9
    23.976
    Progressive
    NTSC, PAL
    1280 × 720
    16x9
    59.94
    Progressive
    NTSC
    1280 × 720
    16x9
    50
    Progressive
    PAL
    1280 × 720
    16x9
    24
    Progressive
    NTSC, PAL
    1280 × 720
    16x9
    23.976
    Progressive
    NTSC, PAL
    720 × 576
    16x9
    25
    Interlaced
    PAL
    720 × 576
    4x3
    25
    Interlaced
    PAL
    720 × 480
    16x9
    29.97
    Interlaced
    NTSC
    720 × 480
    4x3
    29.97
    Interlaced
    NTSC
    And here are the audio formats supported:
    Codec
    File Format
    Sample Rate
    Sample Size
    Channels
    Max Bitrate
    LPCM
    .wav
    48 kHz
    16, 20, 24
    2, 4, 6, 8
    n/a
    LPCM
    .wav
    96 kHz
    16, 20, 24
    2, 4, 6, 8
    n/a
    LPCM
    .wav
    192 kHz
    16, 20, 24
    2, 4, 6
    n/a
    Dolby Digital
    .ac3
    48 kHz
    n/a
    up to 6
    640 kbps
    Dolby Digital Plus
    .ec3
    48 kHz
    n/a
    up to 8
    4736 kbps
    DTS
    .dts, .cpt
    48 kHz
    n/a
    up to 5
    1509 kbps
    DTS-HD
    .dts-hd
    48 kHz
    n/a
    up to 8
    24500 kbps
    DTS-HD
    .dts-hd
    96 kHz
    n/a
    up to 8
    24500 kbps
    DTS-HD
    .dts-hd
    192 kHz
    n/a
    up to 6
    24500 kbps
    Let me know if you have any specific questions on the specs, or any files that are getting transcoded, and I can take a look.

  • What does it Take... What is the Wizer Move?

    What does it take? What is the Wiser Move?
    Currently we are running Oracle EBS 11.5.10 with an RDBMS 10.2.0.4 on Windows 2003 32 bit. We would like to get to a 64 bit OS and we are looking at 64 bit Linux or Windows. I am interested in two main areas.
    1.     Where is the path of lease resistance/easiest moving from Windows 32 bit to Windows 64 bit or Linux 64 bit? At first glance you would think Windows 32 bit to Windows 64 bit.
    2.     What it the “Best” path. In the long run I would think we would be better off going Windows 32 bit to Linux 64 bit, but what would that take.
    Any thoughts are welcome.

    Hi Chris,
    1.     Where is the path of lease resistance/easiest moving from Windows 32 bit to Windows 64 bit or Linux 64 bit? At first glance you would think Windows 32 bit to Windows 64 bit.You cannot run Oracle Apps 11i on Windows 64-bit OS as the application tier is not certified to run on this OS. For the database, it is possible by following the steps in (Note: 369693.1 - Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2). Also, please see (Note: 343917.1 - Frequently Asked Questions: Oracle E-Business Suite Support on x86-64).
    2.     What it the “Best” path. In the long run I would think we would be better off going Windows 32 bit to Linux 64 bit, but what would that take.You will have to use export/import to move the database -- See (Note: 362205.1 - 10g Release 2 Export/Import Process for Oracle Applications Release 11i) for details, and (Note: 238276.1 - Migrating to Linux with Oracle Applications Release 11) for the application tier node.
    Regards,
    Hussein

  • What does it take to complete a contract?

    Hello Gurus,
    I would like you to use a Sales Contract. Change the completion rule of the according Item Category to 'Not relevant for completion'. When you reference a sales order to this contract item, the contract status will stay open. What does it take to complete the contract in this case??
    Thank you!

    HI
    In copy control of Item Category maintain Create document flow records in Update document flow so that when ever the material is referred to subsequent document the status of doc will be completed OR enter the reason of rejection in line item.
    Regards
    Santosh.A.R

  • What does SHARED mean in FINDER

    What does SHARED mean in Finder ?

    Where are you seeing "Shared" in the Finder?
    Are you referring to the section in the Sidebar of the Finder window?
    That section will show you files on connected servers and "Public" folders of other users on other connected Macs. You can make your own "Public" folder visible in this way by enabling "File Sharing"  in the "System Preferences > Sharing" panel.

  • I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
    tt2

  • What does one do when iPhoto version 7.1.5 only opens one event without showing all photos?

    What does one do when iPhoto version 7.1.5 only opens one event without showing all photos or any other events?

    Depends -what other clues? What recently changed? Do you have a good current backup?  best guess is to Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - and repair the database - if that does not resolve things rebuild your iPhoto library database
    LN

  • What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

    What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

    If you had Firefox save your Yahoo password, first try deleting that here:
    orange Firefox button ''or'' classic Tools menu > Options > Security > "Saved Passwords"
    The "signed out" message seems to be related to how Yahoo authenticates you. Some users have reported that disabling automatic proxy detection solves the problem, and it also resolves an issue of getting logged out every few minutes, if you have ever experienced that.
    To make the change:
    orange Firefox button ''or'' classic Tools menu > Options > Advanced
    On the "Network" mini-tab, click the "Settings" button, then choose "No Proxy" and OK your way back out.
    If your work connection requires you to use a proxy server, try the "Use system settings" option instead.
    Does that help?

  • TS1702 what does it mean when it says you cannot update this software since you have not owned the major version of this softwear

    what does it mean when it says you cannot update this software since you have not owned the major version of this softwear

    What were you doing when this happend?

Maybe you are looking for

  • Find my Friends : Support for multiple users under the same Apple ID?

    Can multiple users under the same Apple ID use the app to find each other?  My daughter uses my Apple ID with her iPod touch which allows me to monitor her purchases but it seems that only one device under an ID can use the app at a time.  If that is

  • My MacBook Pro won't go past the grey screen. It only shows that it's loading and doesn't go any further.

    Okay well, to start off, I got my MacBook from a distant family member who got a new one so they let me have their old one. They got it from a pawn shop so I don't have the disk that we got the OS from but it hasn't had any issues UNTIL NOW. I need t

  • [Solved] How to force enable rounded corners in a theme on GNOME 3.16

    Hello I just recently started using arch (and I regret why didnt I use it earlier -.-, such a great OS). I put up Gnome 13.16.2 as my desktop environment particularly because I like its interface (rounded corners, the ui etc. Kinda reminds me of my f

  • Problem in Spool

    Hi All,   I need to print 250 character lenght text in spool(SP02).but its showing only 132 characters even after downloading to a flat file.Is there anyway to get the whole text without getting truncated.. Thanks, Rakesh..

  • HDD not detecting

    Hello! My SATA WD Caviar Green with SATA&IDE USB 2.0 Cable not detecting in Windows 7. I can see "DISK 0" in Disk Manager and when i trying initialize "DISK 1", i recieving a message "Device not ready ". Does anyone any ideas?