What does memory low mean and what can I do?

what does memory low mean and what can I do?

The iPad is low on RAM which is the memory that the operating system and apps need to run smoothly and efficiently. You can close apps and that might help. Restarting or rebooting the iPad might help as well.
To close you apps, tap the home button. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Similar Messages

  • While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54).  What does this error mean and what can I do about it??

    While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54).  what does this error mean and what can I do about it??

    The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

  • What does this icon mean and what does it do?

    Hi all!
    I wonder what does the icon in the bottom middle do: http://bildr.no/view/738173
    If it is some sort of an archive function where does the e-mails go then? I can not find them anywhere...
    Message was edited by: AlexSasha

    Some e-mail servers (like Google if you're using IMAP, which is the default iPhone setup for Google) don't allow you to delete messages via the iPhone Mail app. It basically moves the message from the inbox to Archive (or at least to the All Mail Folder).
    For POP3 e-mail, the iPhone does allow you to delete the messages.

  • What does this error mean and how can i correct it

    when i compiled my program on a different computer it worked fine but i brought it home and i get the following error what should i do?
    F:\programming\SortInput.java:8: cannot access MyInput
    bad class file: .\MyInput.class
    class file has wrong version 49.0, should be 48.0
    Please remove or make sure it appears in the correct subdirectory of the classpath.
         a = MyInput.readInt();
    ^
    1 error
    Tool completed with exit code 1

    gets out spoon. . .
    The program was compiled to a version that is 1.5 compliant.
    You tried to run it with an earlier version that does not know anything about the new information and formats that the 1.5 version introduced, and it refused to run the program.
    Use the same version for compiling and running (simple solution, there are others.)

  • What does this error mean and why can I not find a reference to it ?

    In my continuing saga to get the type of backups I want our new Basis
    Admin had me use the brarchive option -ds  to brbackup
    brbackup -u / -p init$.sap -t online -m full -c -a -ds
    the brarchive option being -ds
    when the above was executed it gave the error
    BR0197E Chained start not supported for '-ds'
    I can find no reference to BR0197E anywhere
    -pete

    Hi,
    Found it as an "Info" message, not "Error". But it seems your case:
    <i>BR197I Chained start not supported for '%s'
    Explanation: A BRBACKUP and BRARCHIVE backup in a single run is not supported for all combinations of parameters or options (for example, not for backups to disk with backup_dev_type = disk ).
    Program response: The BRBACKUP/BRARCHIVE run terminates.
    User action: Do not use the parameter or option in the message for the chained start.</i>
    Regards,
    JC Llanes.

  • What does this message mean and how can I avoid it?

    This computer’s local hostname “joseph-santos-computer-4.local” is already in use on this network. The name has been changed to “joseph-santos-computer-5.local”.

    It means that you have four other computers or wireless devices on your network.

  • What does this error2 mean and how do I fix it?

    What does this error mean and how do I fix it?  I am trying to reinstall CS4 on my Windows 8.1 machine. 
    Adobe Flash Player 10 ActiveX
    Error:
    Error 2.
    Here is the initial error: http://s29.postimg.org/wqy2ju8iv/Untitled.png
    Here is a screenshot when I click the "More Information" button: http://s27.postimg.org/bugb7rx7n/Untitled2.png
    And here is the screenshot when I click the "Get Support" button: http://s4.postimg.org/c2ynvhmvx/Untitled3.png
    I'm stumped.

    Hi there I've just installed CS4 Pro on Windows 7 64bit and got exactly the same result as you. Did you manage to find anything out, because the thing that bothered me was the limited functionality (what ever that is). Is it just a case of Windows 7 having a newer version of ActiveX already installed?

  • HT201335 OK, so I have the 1st generation iPad.  There is an AirPlay symbol, near the music symbol.  Is this useless? If I enable it, what does it enable?  And, what technological advances were made over the last 2 versions that have made my iPad 1, obsol

    OK, so I have the 1st generation iPad.  There is an AirPlay symbol, near the music symbol.  Is this useless? If I enable it, what does it enable?  And, what technological advances were made over the last 2 versions that have made my iPad 1, obsolete? 
    Thanks for the enlightenment!
    Jeff

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • What does this message mean - The operation can't be completed because the item "12b" is in use.

    The operation can’t be completed because the item “12b” is in use.  What does this message mean.  It appeared as I was attempting to clear my time machine backup?

    Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.

  • CSCC - what does the "id" mean and how to get it

    https://apps.cisco.com/CustAdv/ServiceSales/contract/productDetailsIndex.do?method=loadProductDetails&contractId=55565082772&serviceLineNumber=55565082912&lineID=55565086982&instanceID=1483016052&contractNumber=93913779&id=382878711&majorOrMinor=MAJOR&coveredOrUncovered=COVERED&lineSeqNo=45823525&contextID=0.4317186686218467
    Currently I am developing a web client tool to get contract information based on the SN. And I don't find any existing API of CSCC, I had to parse the html instead. But I encountered an issue here as $subject which highlighted in the above link. What does the id number mean and how can I get it ?

    Are you running Firefox in Windows 95 or 98 compatibility mode?
    Mozilla/5.0 ('''Windows NT 4.0'''; rv:35.0) Gecko/20100101 Firefox/35.0
    Firefox won't install on Windows NT 4.0 - so something is changing your useragent and saying that your operating system is like 20 years old.
    Right-click your Firefox desk-top shortcut and select Properties. Then open the Compatibility tab and look at '''Compatibility mode''' - un-check that box if it has a check-mark.

  • HT201514 What does this message mean and how do I correct it?

    What does this message mean?
    "The backup disk image “/Volumes/Nicholas' Time C-1/nicholas--MacBook Pro.sparsebundle” is already in use"
    How do i correct it?

    What does this message mean?
    It means that there are bugs in Mountain Lion.
    How do i correct it?
    Make sure that no other Macs are backing up at the current time
    Pull the power cord from the back of the Time Capsule
    Wait 10 seconds
    Plug the power cord back into the back of the Time Capsule
    This simple reset will fix this issue 98% of the time. If you happen to be in the unlucky 2% category, post back and we'll provide more information.

  • What does this actually mean and how do I fix it: Alert: Error Count Monitor Resolution state Object Hyper-V Virtual Storage Device Has a value

    We are getting this alert on a fair few of our VMs with VHDXs and Dynamic VHDs. Everything seems OK but I am not sure what this actually means and what I need to do to resolve the issue. How do I reset the error count if that is what is required? Thanks
    in advance.
    Alert: Error Count Monitor Resolution state: New
     Error Count Monitor Source: MyVm01 Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE Last modified by: System Last modified time: 2/9/2013 2:08:48 PM Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual
    Sat 09/02
    To:Administrator
     09 February 2013 14:09
    Alert: Error Count Monitor
    Source: MyVm01
    Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE
    Last modified by: System
    Last modified time: 2/9/2013 2:08:48 PM
    Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual hard disks-MyVm01-DATA02.vhdx
                Object Hyper-V Virtual Storage Device
                Counter Error Count
                Has a value 9
                At time 2013-02-09T14:08:48.0000000+00:00
    Darren

    But I am getting this alert from SCOM and SCOM has no information about the alert for me to find out what to do - thought that was the point of SCOM to let you know of problems and how to resolve them. :)
    The alert is coming from the Error Count Monitor that is part of the Hyper-V Management Pack Extensions (v 4.0.0.0)
    I have tried looking in the Event Logs on the Host and there doesn't seem to be any storage related errors there. I am trying to establish if this is a false positive, why it is happening and if it is safe to override and ignore.
    There is nothing on the Product Knowledge tab and nothing on the Alert Context other than what I have already mentioned (see below).
    Thanks for responding.
    Time Sampled:
    09/02/2013 14:08:48
    Object Name:
    Hyper-V Virtual Storage Device
    Counter Name:
    Error Count
    Instance Name:
    c:-clusterstorage-volume1-myvm-virtual
    hard disks-MyVM-DATA02.vhdx
    Value:
    9
    Darren

  • What does "Adjustments disabled" mean and how do I get it enabled?

    When 2.1 came out I bought it, but have only tried to use it today. Projects works, Metadata works but Adjustments says "Quick Preview On (adjustments disabled). I have a couple of questions?
    1) How did this happen?
    2) What does it mean and?
    3) How can I get them enabled?
    Thanks so much

    Well, that was easy. I looked throughout the manual, but couldn't find this. I assumed that there was some problem with my registration. This is a most satisfying answer. Thanks so much.

  • What does this icon mean and why does a black battery appear behind it?

    All of a sudden, since last night, an intermittently flashing black battery appears behind one of the menu bar icons. Unfortunately, I don't know what the original icon means! From right to left, I have the volume icon, the wireless connection strength icon, a telephone icon, (what I think is) an Ethernet icon, then this funny icon -- three horizontal black dots, with a thin vertical line and kind of an X running through them. (Can you tell I'm not a computer person? Anyway, can anyone interpret these signs for me? Inquiring minds would very much like to know, especially if something drastic is about to happen. TIA!
    iMac G5   Mac OS X (10.3)  

    Donna,
    If you used Setup Assistant, Mac OS X 10.3: Setup Assistant migration may transfer portable-only menu items to a desktop computer may explain what is happening and how to fix it.
    ;~)

  • What does MSVCR80.dll mean and why won't iTunes play

    I made a mistake of trying to play music while doing an update.  Now I can't open iTunes and I get the message "This application has failed to start because MSVCR80.dll was not found.  Re-installing the application may fix this problem"  It DOES NOT.  I have deleted all the apple programs and things off my computer then re-installed them.  It did not change the message I am getting.  I am also getting the message that "iTunes was not installed correctly. Please re-instal iTunes. Error 7 Windows error 126"  I have tried to restart it making it the administrator. It didn't help. What do I do now?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for

  • Blue Screen of death on install

    Hey, I have followed all the bootcamp instructions to install my windows 7 onto my Mac Pro 2x dualcore 2.6ghz 11gb ram 250gb hardrive - Lion OSX 750gb Hardrive - Windows 7 Everytime I go to turn my computer on to finish the install, I get blue screen

  • Change subject of mail provided by Report RSWUWFML2

    Hi I am using program RSWUWFML2 to generate Notification with executable attachment for workitems that are assigned to a User. The requirement is to change the Subject line or rather increase the number of characters that appear in the subject line.

  • Quality Issues in QuickTime Movies

    I have notices since switching over that movies that I created on iMovie, and then exported using QuickTime are playing lousy. I found this out when watching them on Front Row. They are very pixelated. Any thoughts would be greatly appreciated. Russe

  • Wireless AirOS Global AP Syslog Level configuration command 7.4.121.0

    Hello I have a controller 5508 running on version 7.4.121.0. With the command "show ap config global" I can check the global AP syslog config: AP global system logging host.................... 0.0.0.0 AP global system logging level...................

  • Important non classpath related question

    Simple enought question. Danni or Kylie?