What does this message mean baring in mind we don't know who 'Lareib' is?: ''Lareibs phone' is now using (my number) for iMessage'
What does this message mean baring in mind we don't know who 'Lareib' is?: ''Lareibs phone' is now using (my number) for iMessage'
How would we users in this forum also know who Lareib is?
It means what is stated, that person is now using your number for imessage.
Similar Messages
-
what does this message mean: this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.
FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
http://support.apple.com/kb/HT1311 -
What does this message mean? "itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with ITnes." How do I restore when every time I connect to my computer I get this message?
Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards. -
What does this message mean Charging is not supported with this device?
What does this message mean Charging is not supported with this device?
You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast. -
What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing." ?
What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing." I am in the process of importing photos from iPhoto (don't really know what I'm doing....) and when I look at one of the imported photos that message pops up. I know what "DSC_0088.jpg" is. I don't know what it means that the file is "missing".
CASpyr,
Thank you so much for your reply. I have a couple of bigger issues that I am dealing with: too many photos on my laptop: 40,000! (Of course I have to throw away many of them, but that is time consuming). I have a MacBook Pro and have primarily used IPhoto. I have recently purchased 2 external drives and have transferred my photos to those, but I need a basic education about how photos are stored, copied, etc. I have recently been told that iPhoto only shows and deals with jpegs, not RAW. About 1/3 of my photos are RAW, so I purchased Lightroom, so I could do more with those RAW photos. I have been told by my local Mac store that I need to delete most of my photos from iPhoto, because it's causing problems. I am reluctant to do so until I am sure that all of the keywords, descriptions and editing I have done to these photos is not lost when deleted from iPhoto. I just watched a tutorial about importing to Lightroom and got out of it that I needed to copy photos from iPhoto to a file on my desktop and then copy to Lightroom. I did that, it seemed to work. Then (because of my storage/memory issues) I deleted the photos (just a few as an experiment) from that desktop file. I'm guessing that is why Lightroom doesn't recognize the the photos. It seems that (learned from another tutorial) that one uses "Add" , Lightroom is only connecting to the source of the photo, not actually copying it to the program. Sounds like I need to use the "Move" feature instead. My ultimate goal is to store the photos on the 2 external drives and eliminate most of them from my lapop. So my basic questions have to do with what data (metadata??) is copied from iPhoto to an external drive (RAW???) and what isn't copied. Basic understanding issues,obviously…. I hope this isn't too much to ask. If you can recommend a book or resource that can explain those basic issues to me I'd appreciate it. I just got back from a trip and I can't download my new photos until I manage the rest!
Thanks,
Nancy -
What does this message mean - The operation can't be completed because the item "12b" is in use.
The operation can’t be completed because the item “12b” is in use. What does this message mean. It appeared as I was attempting to clear my time machine backup?
Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.
-
What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" I get this when I try to repair permissions in disk utility.
It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.
-
What does this message mean: "power pc applications are no longer supported"?
What does this message mean: you can not start because power pc applications are no longer supported?
Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization. -
HT201514 What does this message mean and how do I correct it?
What does this message mean?
"The backup disk image “/Volumes/Nicholas' Time C-1/nicholas--MacBook Pro.sparsebundle” is already in use"
How do i correct it?What does this message mean?
It means that there are bugs in Mountain Lion.
How do i correct it?
Make sure that no other Macs are backing up at the current time
Pull the power cord from the back of the Time Capsule
Wait 10 seconds
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue 98% of the time. If you happen to be in the unlucky 2% category, post back and we'll provide more information. -
I creaetd a Webhelp Pro help file and now my co-worker can't
access it. She gets the message 'Open project was cancelled or
unable to load database for "\\DEVELOPMENT\f\Jenny\Documentation\28
AX System\AX System.cpd" ' The CPD file is the directory - I can
open the project with no problems.
It is checked into SourceSafe using RoboSource Control- but
no one has it checked out.
Does anyone know what this message means? Thanks in advance
for any help!
JennyNever mind - I see all the previous posts about this problem.
I'm sure I"ll find my answer there. -
What does this message mean when i dial
What does this verizon message mean?
'your call cannot be completed as dialed'
i got a number on my caller id from my ex's neighborhood
609-424-xxxx
its not his (old, home) number, but i am concerned that he got a new number or maybe called from a pay phone--
he has a history of psychological abuse
i tried calling the number back from a pay phone from the next county to see if i could find out thatit wasn't him to put my mind at ease..
but i got the above message
i dialed the number that was on my caller ID
would this message come up if it were a payphone that does not take incoming calls?
why else would i get the message.
thats the number that came into my caller id, but i am told it can't be completed as dialed..
i was calling from the 732 area code and did use the full number with the area code
i tried googling the number and doing a reverse look up
we live far apart--i don't know anyone else in his town--its too much of a coincidence to just be a wrong number
there is not enough to file a police report yetThis seems to suggest that it could be filenames… (see the final posts).
https://discussions.apple.com/message/7818914?messageID=7818914#7818914?messageI D=7818914
Replace dashes, underscores, hyphens & any other funky looking characters. Very long filenames of folder paths may cause trouble too. -
Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?
Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear. -
What does this message mean in iphoto?
I got the following message in my iPhoto when I tried to open it:
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
What does it mean? How can I get to the photos without the upgrade? What exactly does it mean that the library will not be readable?
I'm afraid to upgrade but without I can't get to my photos
Help!!
Thanks.Well what it means is exactly what it says
when you upgrade you can no longer access that iPhoto library with older versions - which is not a problem unless you have multiple computers accessing the library
And of course you always backup prior to upgrading in case of unusual problems
What version of iPhoto do you have? What version are you upgrading to? what version of the OS do you have?
LN -
What does this message mean...Program: C:\Program Files (x86)\Internet Explore\iexplore.exe
everytime i log onto the internet this message appears
Program: C:\Program Files (x86)\Internet Explore\iexplore.exe
AND THEN AN INTERNET HAS STOPPED WORKING BOX APPEAR AND IT SHUTS OFF
WHAT DOES IT MEANeverytime i log onto the internet this message appears
Program: C:\Program Files (x86)\Internet Explore\iexplore.exe
AND THEN AN INTERNET HAS STOPPED WORKING BOX APPEAR AND IT SHUTS OFF
WHAT DOES IT MEAN -
A friend recenlty replaced my hard drive.
When I try to use itunes--I receive this message: "The song could not be used because the original could not be found, would you like to locate it? Next to my songs I see this: "!" Help--Please!!Well what happened is the pathname to the song has changed slightly.
For instance if the song was located say c\:Windows\User\Mary\Music\iTunesFolder
and now it's c:\Windows\User\MaryXray\Music\iTunesFolder
I'm assuming here your music was replaced in the Music folder like on the old hard drive, that iTunesFolder was simply copied over in whole.
So to fix things, you go into the iTunes Folder in your Music Folder and look for a iTunes Music Library .XML file and open it in a Text Program that has "find and replace" ability.
You find the partial pathname of the old drive and you replace ALL instances of it with the new pathname.
so \Windows\User\Mary would be changed to
\Windows\User\MaryXray
Save the file and reopen iTunes.
Maybe you are looking for
-
[Solved] [YAKA] Yet Another KDE 3.5.9+hal+ntfs-3g Automount Prob
Ok so the basics KDE 3.5.9 from kdemod (not the full version): from desktop go to control center -> Desktop -> Behavior -> Device Symbols (3rd Tab) and make sure the box is checked (Checked) --> I got the corresponding Icons On Desktop CD-ROM/DVD-ROM
-
Why I can't change on the settings ,I cloud ,advanced l, mail and then email address there I can't change ? Help please?
-
I'm brand new to Logic, but I've been reading through the manuals for a month. I wanted to ask people about using stereo effects vs mono. Say I record vocals in mono, and would like to process them with a stereo reverb. Do I need to make that mono tr
-
Problems using Flash player 11.8.800.168 with Firefox 23.0.1 ?
I am trying to use Virtual Credit Card Number software with Firefox. I downloaded Flash Player 11.8.800.168 But when I try to open the Virtual Number software it continues to tell me to install Flash player. Any help out there?
-
How do i center an image in dreamweaver
i am making a menu at the index page and i have the dimensions at 500X600 because it is supposed to bassically take up the whole page(somewhat), and i will add the buttons to it later and i can't seem to get it centered, i have tryed the "allign" set