What extension is needed to enable video from the Cleveland Browns web site?
What extension is needed to enable video from the Cleveland Browns web site? Video and movies play everywhere on the iMac OS 10.9.2 and my Safari 7.0.2 browser except on Cleve.Browns site. I had it working earlier but after a crash I must have made some changes and video is no longer available on that site?
Thank you for the suggestion but my Safari uses 12.0.077 Flash PLayer and the video on the Browns' site still does not respond. Works OK on FireFox but not at all on Safari.
Similar Messages
-
I cannot download any apps from the creative cloud web site what can I do?
I cannot download any apps from the creative cloud web site, what can I do?
What problem you are facing? any error message.
What operating system? -
If I get the Apple Universal Dock , what cable do I then need to get video to my HDTV ? What about the audio portion ?
OK, so that part is correct. Then, do I just hookup and it automatically goes onto my computer? What will capture it, or will it simply show on my desktop and I need to open it with...what?
-
I am having a problem printing pdf forms from the USDA FSA web site
The forms can be populated and printed but not saved. Each time I populate a form and try to print it the website stops responding. I have try without populating the form, I ve tryed different forms, different printer and system. restarting the computer, flushing my cache. I can print other pdf files, I can populate and print from other website. It only happening to me at the USDA FSA website after selecting an eform such as FSA 2002. Any help out there?
You should be able to right click on the PDF in the site and save the form. Even if you can not, once the form is displayed it is actually saved to the TEMP folder and you could play with that version. You will not be able to save the form with any data included, only the form itself since you are using Reader (by the way, there is a separate forum for Reader that might provide better answers).
To avoid the problems you mention with the web site, I would do the download of the form if at all possible and work directly in Reader on your system. That might solve the printing problem you are having. When I opened it yesterday, there was some linking to the site that I found a bit unusual, but I did not find anything in the PDF that would have done that -- I did not spend a lot of time looking for such things that would be typical of some JavaScript or such. -
Dear Sir !
I have an account at TAGGED.com program since more than 2 years, I accustomed to log in from bookmarks.
The problem that now i did not found the TAGGED program in my bookmarks n I need to log in by e-mail n password..I forgot the e-mail I had registered 2 years before at Tagged, So I can not log in.
How Can I find my account again at the bookmark or history??
My Name on my profile page at Tagged is Dr.semsem666G
Many thanks in advanceThank you for replying. Yes I deleted the old email address..
-
Need Help Streaming Video From Web Server Built Into Application - Linksys WRT54g Router
Very much appreciate any help getting streaming video feed from web server built into video application to work properly using port forwarding on my Linksys WRT54g wireless router.
Here is the situation:
My PC is connected to the internet via a Linksys WRT54g wireless router.
The Windows XP Pro SP2 firewall is enabled, with a firewall exception established for the video camera application.
On the router, forwarding of port 80 is enabled for the LAN IP address of the PC running the video application with an embedded web server, and the web server in the video camera application is also set to use port 80.
I have a free DYNDNS account and also run the DYNDNS updater program on the PC running the video application with embedded web server. According to the DYNDNS web site and the DYNDNS updater program, the IP address assigned to the machine running the video application with embedded web server is set correctly in my dyndns account.
When I open a browser (Explorer or Firefox) on the PC running the video camera application with embedded web server, I am able to connect to the video application's web server by going to the dyndns address linked to the machine running the video application. The video application's web server is set to use the dyndns address. That's the good news. The bad news is that I can't connect to the video application's web server from any machine that connects to the internet that uses a router other than the router used by the PC running the video application. I am only able to connect to the streaming video from the application's web server only on machines that connect to the internet using the same (home) router used by the PC that is running the video application.
Since I am able to connect to the video app's embedded web server successfully on the machine running the video application, it seems that at least something about the current port forwarding settings is correct. For example, if I uncheck 'enable' for forwarding of port 80 on the router settings page, I am no longer able to connect to the video app's web server when I try to do so in a browser running on the machine running the video app. When I re-enable port 80 forwarding on the router, I am again able to connect to the web server of the video application on the machine running the video app. I thought that by enabling forwarding of port 80 on the router and associating that port with the LAN IP of the machine running the video application, it would be possible to connect to the streaming video of the video app's embedded web server from ANY machine connected to the internet, but that is not the case. There must be some other router settings to update/change in order to get the port forwarding working to enable a successful connection to the video web server, but I am stumped. Very grateful for any suggestions as to how to get this working properly.
Thanks in advance...The firewall log can be configured on the third tab in the window for the firewall settings, where you can turn the firewall on and off completely.
From your tests, though, it does not seem to be the firewall. However, to be sure, it would be good to check the log. It will help to eliminate the firewall as the culprit and you may find it handy in the future, too. ;-) Just don't forget to turn the log off again after you are done because it may cause some performance penalty on your system while on.
From what you write, it seems as if I should give a little networking background on the ip addresses you'll see. Your setup is (or should be) a modem connected to the WAN/Internet port of the WRT. The computer is connected into a LAN port of the WRT.
Your router has two IP addresses (that's what makes it a router): a WAN address and a LAN address. The WAN address is the address assigned by the ISP. It is a normal internet IP address. Everyone is able to send packets to this IP address. The WAN address is the one reported by whatismyipaddress.com, it should be listed in the dyndns record and it is the address that your router shows on the Status page. It's the public IP address of your router. Dyndns maps your dyndns.org name to that IP address.
Your router also has an IP address on the LAN side. You can configure it to be whatever you want. The default is 192.168.1.1 with netmask 255.255.255.0 and it is better to leave it like that or at least inside the network 192.168.*.*. 192.168 is a special, reserved IP address range for private networks. Basically, routers in the internet are not supposed to forward addresses in this range. That makes them suitable for private LANs as the packets never can get anywhere. Most people using Linksys routers have there LAN in 192.168.1.*.
The router acts as gateway, which means it forwards packets from PCs in the LAN to the internet and back. As all your PCs in your LAN share a single WAN IP address, the gateway does address translation (NAT). This works only in one direction: from the inside to the outside. The router remembers when a PC in your LAN sends something out and accepts the responses in and sending them back to the PC. If something comes in from the internet which cannot be associated with a ongoing communication the packet is dropped unless you use port forwarding.
All computers in your LAN either have a static IP address assigned or use DHCP to get it automatically. The router has a DHCP server as well which gives out IP address from 192.168.1.100-149 if not changed. With a router with default settings static IP addresses can be in the range of 192.168.1.2-99 and 150-254.
ipconfig /all reports your IP address in your LAN, i.e. an address 192.168.1.*. The gateway in this output should be 192.168.1.1 which is your router. And packet no in the LAN address range 192.168.1.* is send to the router which forwards the packets into the internet.
An address 192.168.1.* should not appear as internet address in the Status page of the router nor should it appear at dyndns.
Port forwarding is used to operate a server in the LAN. By default, a server in the LAN cannot be reached from the internet. You have to configure port forwarding for this. You configure that traffic bound for a specific port (e.g. TCP port 80 for http) on your WAN IP address is forwarded to the same port on a specific LAN IP address. If your server runs on 192.168.1.50 than traffic to your WAN IP address port 80 is forwarded to 192.168.1.50 port 80. That way your HTTP server can be reached from the internet. As you can only configure a fixed IP address in port forwarding it is recommended that the server uses a static IP address and not DHCP as in the latter case the IP address may change over time...
O.K. so much for networking. I hope that makes things a little clearer and you can verify that your setup is how it is intended to be.
I suggest the following: on the router's security page there is an option to block WAN requests. Remove the check if it is set (meaning: do not block). After you did that change you should be able to ping your WAN address (e.g. ping xxxx.dyndns.org) from the internet. That way we know that it is on the correct address.
Also on the Administration page make sure that remote management is disabled (should be like that per default) or that the management port is NOT 80 but for example 8080. What is your your UPnP settings on the same page?
O.K. that should be enough for the moment... -
I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable? Any ideas
Try dragging the image to the desktop, then drag the image to the slide you want it on
-
I recently purchased two videos from the itunes store. I downlooaded them both successfully to my ipad2 Videos App, the next time I synced the ipad the Movies title was erased and the remaing titles: Rentals Podcasts & Music Videos were left, what happed to the Movies title? I am now getting a message saying (my ipad does not support movies I purchased) anyone else experiencing this problem, any suggestions?
don2skisThere is a few events where I could see this happening...
It's possible if you computer is not authorized with your iTunes Store account it may not have transfered your purchases from the iPad to the computer. To check, Open iTunes> Select the "Store" menu along top of the program and select Authorize this computer. Sign in with your AppleID and password, this will make sure your computer is authorized for the future so you can transfer purchases from your device.
http://support.apple.com/kb/HT1848
However, if your Movies are missing now you'll need to request to redownload or "regrant" them. Please send an email ticket into iTunes Store via...
http://www.apple.com/support/itunes/
Select "Video Purchases" in the grey boxes, then "Lost or Missing Items", then click the link to "Email Us" on the right. Fill out that form and the folks at the iTunes Store should get back to you less than 24 hours. -
I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.
dont know what to do
-
i have a mac book pro and a panasonic SD Video camera SDR-S50 - but i cannot transfer videos from the panasonic to my mac - does anyone know what i should do? - Rochelle
If the macBook Pro will not read the card/files then you might need a converter, check out:
http://www.hdconverterformac.com/article-mod-video/panasonic-sdr-mod-to-mac.html
http://expertscolumn.com/content/how-play-or-edit-panasonic-sdr-mod-files-mac-os -x -
How can I delete videos from the cloud when I don't want to keep them anymore.
I recently tried to download PARKER with no luck so am presuming their is no more space.What you have stored in iCloud is unrelated to your abiity to download things to your iPad. You need to look at local storage. Settings>General>Usage.
-
What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.
No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2? -
after installing the update I get this message on an app from facebook "502 Bad Gateway
nginx" what is the issue and what do I need to do to solve the issue?Hi there, harleygirl.
A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6 -
I have an old Mac Tower. I need to move data from the unit to an external hard drive. What kind of of hard drive must I purchase so that it works with the Tower? There is not a lot to transfer.
MG,
What we might need to do is to change the question. What computer do you plan to use the data on in the future? For example, if you have a newer tower, just move the hard drive to the new tower. If you want to use the data, what about an ethernet LAN to get the data over? If you want to archive the data, how do you store the second drive? What are your plans for the first drive? If the new software will not recognize the old file type, the data must be exported. Just getting files to another hard drive will not finish your journey.
As Allan said, knowing the exact model and year of your tower is important. My suggestion is to find a user group near you. Please post back with more information, including the name of a large city near you.
For example, our user group just experimented with a 1983 Apple IIc that predates the Mac. It started right up, read files from 1984 and saved them from a 5.25" floppy to a 3.5" floppy. That 3.5 floppy will go into a platinum G3 which will read PRODOS files using Apple File Exchange. That G3, with a USB card, will allow saving the files to a USB flash drive. But, somewhere along the way, some software has to read the file and convert it to data that is useable by current software.
Ji~m -
HT1218 What do I need to do to use the Airplay feature with Jango Radio from my iPhone or Mac?
What do I need to do to use the Airplay feature with Jango Radio from my iPhone or Mac?
Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody
Maybe you are looking for
-
Hi all, I am using System Center 2012 R2 Operations Manager with the Key Management Service Management Pack at version 6.0.7234.0, and I keep receiving the following alert in Operations Manager: "Idle Minutes Monitor Alert: Key Management Service (KM
-
Sorry... I know this topic has been done to death but I still have some questions. In my development, I keep encountering a recurring problem that I believe should be solved by the 'factory pattern'. (Note: I'm not a patterns nut so I am only guessin
-
Pre Pro CC 2014 Cuda acceleration issue - it's back
Greetings. I remember reading an Adobe creative cloud blog that said we now would be able to choose Cuda acceleration even if our card was not on the very SHORT approved list of NVIDIA cards. That was great!!! Worked fine with Pr Pro CC (the origi
-
Which Apple and PC wireless security solution?
We have several apple users and pc users so I want to find out what the better security solution will be for our wireless. Currently we run LEAP and MAC authentication. I also use TKIP and CKIP. We have ACS for radius. Would PEAP be better? And shoul
-
Disable roaming on 3g modem - cisco 819
we installed a cisco flexvpn solution using cisco 819 with 3g modem as spokes. in order to limit the costs we would like to disable the roaming feature on the modem. is it supported? if yes how? thank you