What happened? I can no longer see property changes in the design mode/

I'm not sure what I did to make this change, but previously
when I use the property values as opposed to html code to make
changes, color, formatting, etc, it could be immediately viewed
without out going out to the browser.
I would view with browser and maybe make a few changes here
and there to html to finess, but primarily I could do all in the
design layout.
Now, even when I color text, it doesn't show until I preview
in browser. Changes in font size, color, etc, nothing can be seen
until I go to preview and save.
Can anyone tell me what change I made to cause this?
Thanks for your help in advance. Sharon

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"YBBD" <[email protected]> wrote in message
news:gnhkjh$7ap$[email protected]..
> I'm not sure what I did to make this change, but
previously when I use the
> property values as opposed to html code to make changes,
color,
> formatting,
> etc, it could be immediately viewed without out going
out to the browser.
>
> I would view with browser and maybe make a few changes
here and there to
> html
> to finess, but primarily I could do all in the design
layout.
>
> Now, even when I color text, it doesn't show until I
preview in browser.
> Changes in font size, color, etc, nothing can be seen
until I go to
> preview and
> save.
>
> Can anyone tell me what change I made to cause this?
>
> Thanks for your help in advance. Sharon
>

Similar Messages

  • I can no longer see my kobo in the ADE. What do I do?

    I can no longer see my kobo in the ADE. What do I do?
    I was able to transfer my library books by downloading and then transferring them to my kobo through ADE. Now when I open my ADE my Kobo doesn't show up but the kobo is connected to my computer and I can see it in my control panel.
    thanks

    VIEW | Style Rendering > Display Styles
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "YBBD" <[email protected]> wrote in message
    news:gnhkjh$7ap$[email protected]..
    > I'm not sure what I did to make this change, but
    previously when I use the
    > property values as opposed to html code to make changes,
    color,
    > formatting,
    > etc, it could be immediately viewed without out going
    out to the browser.
    >
    > I would view with browser and maybe make a few changes
    here and there to
    > html
    > to finess, but primarily I could do all in the design
    layout.
    >
    > Now, even when I color text, it doesn't show until I
    preview in browser.
    > Changes in font size, color, etc, nothing can be seen
    until I go to
    > preview and
    > save.
    >
    > Can anyone tell me what change I made to cause this?
    >
    > Thanks for your help in advance. Sharon
    >

  • Often, Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted.

    Hello,
    Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
    I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
    Their are no apparent viruses detected.
    Firefox is version v5.0 and occurred in earlier release.
    System is Windows 7 (64bit).

    well, it's not the same hardware and it's a bit different.
    I managed to pass that stage somehow but I still have a problem
    I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
    I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
    when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
    is all the rest of the disk space)
    what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
    I'm trying to make this process as smooth as possible without having additional steps
    Tamir Levy

  • One other user & I can no longer see each other in the buddy list

    My friend & I, who have used iChat for years, and also recently, and neither of us has changed anything, can no longer see each other in either one of our buddy lists.
    We've checked:
    - That neither of us is blocking the other
    - That other people can see us - they can
    - That we can see other people - we can - we can even see the same people as each other, just not each other
    We've tried blocking & unblocking each other, in case that would reset something, and both rebooted our Mac's several times.
    Any ideas???

    Ralph Johns (UK) wrote:
    Hi,
    I can see that Accounts/Screen Names can get messed up on the various flags set by an App to and therefore On the AIM servers.
    What I can not see in this case is why it seems to be limited to just one Buddy on each computer.
    As the Block list (And therefore presumably Allow Lists) are not actually shown in the .p0list I ma hoping that deleting it and restarting ichat at one end at least will reset that iChat form the Defaults haled in the app when you do this.
    (you could delete that Account Screen Name from iChat ? Preferences > Accounts to achieve the same things in a more destructive way as it would tend to rewrite all the .plists which may included Jabber ones that are OK
    We both did delete our screen names in iChat, and also deleted ALL the prefs manually.
    Also, we've tried using entirely different computers to log-in to those same accounts, with the same results - somehow we're blocked from each other.
    I think we're both giving up at this stage. We have additional accounts we can use to see each other. But it would be really nice to get to the bottom of it, because if it happens once it can happen again. Who knows? Maybe there are other people in my buddy list that this is happening with right now, but we don't know it. This person just happens to be someone I chat with a lot, and we noticed we weren't seeing each other.

  • HT1399 I just downloaded the newest version of itunes, and when I connect my ipod nano (3rd gen), I can no longer see my playlists (on the left hand side). I hate the new format...any way to revert back to the old one?

    I just downloaded the newest versionof itunes. Now when I plug in my ipod, I can no longer see my playlists (listed on the left hand side). The new format is very confusing! How do I drag and drop songs into specific playlists I have?  Is there a way to revert back to the old itunes?

    I had the same question. Someone answered perfectly here post https://discussions.apple.com/message/20575126#20575126
    The answer was click View > Show sidebar. Devices and playlists will display in the left sidebar once again.

  • Both my Macbooks can no longer see my iMac on the network

    No clue what changed or what happened. I had it set up fine and up until the last day or so, my Imac was showing up in the Finder shared section on both of my Macbooks and I was doing backups via Airport from the Macbooks to the external drive connected to my iMac. Now the whole thing is down. No shared section on either of the Macbooks and the Time Machine backups fail because it can't find my external drive.
    In my file sharing preferences on the iMac, I have my LaCie external drive and my public folder listed as shared folders, and I have my account, the user accounts from both Macbooks, Users, Administrators and Everyone selected under users with read and write access.
    I have no idea what went wrong and would sure appreciate any advice on this. Thanks Much.

    This is just a hint. Have you recently rename your Computer Name? I have had a problem to see PC computers on my local intranet. I got no problem to connect to all PCs thru IP address but they were not visible on my mac mini or iBook under Shared. When I renamed my Computer Name back to one which I've had before everything come back to normal. (I've had renamed name of my mac mini which I used to configure my AirPort Extreme and AirPort Express base stations. My guess, network configuration in Leopard is very sensitive to computer which you using in the first place to configure your local network) This is just a guess,see if it will help you. Good luck!

  • I cant add anymore video to my unfinished movie.  I can no longer see my clips at the bottom.  What do I do?

    I can't add anymore video clips to my unfinished IMovie! The clips at the bottom (my imported movies) are now not visible (gray).  I can view them when I scroll over them.  Why cant I add more?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • My iMac G3 has developed an issue where I can no longer see any icons on the desktop or access the HD.

    Imac G3 shows no icons on desktop including the hard drive icon Ican only open applications from the dock but then it crashes if I try to open files (for instance word documents) I can see the files are still on the hard drive and Preview will allow me to open some photos. I cannot access the Finder either and the only way to switch off the mac is to open system preferences or any other application which will then allow me to access the options to shut down or restart.
    Does any one have any ideas or experience of this problem?
    I've tried restoring the Hard Disk using the original installation disk (Starting up from the Disk and pressing c) but could not restore disk.

    You have some sort of issue with the external drive, I would use a powered USB hub first if it's not self powered.
    Next I would be looking at purchasing software to direct recover your files from the 1's and 0's of the bits themselves on the external drive as it appears your directory or something is hosed.
    Software that comes to mind is DataRescue $99 which you can download and test first before buying, then send the recovered files to another blank external drive.
    Once you've got your files recovered, then your all set to mess around and experiment.
    Try to access the files with the program version that originally created them, I'm not all that up to speed on iMovie, but I do know there are issues with using older Apple software versions with newer version altered files.

  • HT5706 our apple tv has just automatically updated. since the newest update (5,3) we can no longer see TV shows in the menu options....

    anyone else experienced this or have a solution?

    Welcome to the Apple Community.
    There appears to be a large increase in this type of problem at this time, it seems that that there is a problem at Apple's end, but I couldn't at all be sure.
    There is no issues being reported at Apple’s System Status page, but this status may yet be updated and it may be you need to try again a little later.
    This isn't affecting me here in the UK, where exactly are you.
    So far I have noted users in the following locations having similar problems:
    USA
    If this is a problem at Apple’s end, it is very rarely happens, however when it does only Apple can fix it. When this has occurred previously it has usually been resolved in a few hours or slightly more.

  • I recently updated my iPad to iOS 8 and still checking on the settings. When I happened to swipe on my screen fro too long, it zoomed and I can no longer see what's on it. I can not even unlock it. What shall I do?

    I recently updated my iPad to iOS 8 and still checking on the settings. When I happened to swipe on my screen for too long, it zoomed and I can no longer see what's on it. I can not even unlock it. I can not use my iPad anymore. What shall I do?

    Try double tapping with three fingers and see if that reduces the screen image. If it does, unlock the iPad and go to Settings>General>Accessibility>zoom>Off. If double tapping with three fingers doesn't work, try triple tapping the home button instead.

  • My screen broke and i can no longer see whats happening ive had my phone for 4 months and im under 1 year warranty im sure. they said it would cost me 200$ to replace the phone at the apple store

    my screen broke and i can no longer see whats happening ive had my phone for 4 months and im under 1 year warranty im sure. they said it would cost me 200$ to replace the phone at the apple store

    Apple's one year limited warranty covers hardware... not physical damage!

  • My ITunes gift card I brought, the Reemdem code had bin wide out so I can no longer see that code what do I do

    My ITunes gift card I brought, the Reemdem code had bin wide out so I can no longer see that code what do I do?

    "bin wide out"?
    If you mean you cannot read the code on the back of the card take it back to the store you purchased it from. If the numbers are not visable because you scratched them out I don't know if the store will replace or refund that. If you can read some of the numbers you could just keep trying a combination of letters and numbers to replace the missing ones. This will take a while depending on how many inputs are missing. You will have to use 0 through 9 and I am guessing A through Z.

  • Ll of a sudden, i can no longer see pictures in adds ?? did i click or disable something?? update: I can see them in EI but can't anymore in Mozilla?? What did I click??

    ll of a sudden, i can no longer see pictures in adds ?? If I go to Kijiji and look at any ad I can no longer see the pic in the add. Did accidently click or disable something?? update: I can see them in EI but can't anymore in Firerfox?? What did I click??
    I did a restore ,but no fix.

    See http://kb.mozillazine.org/Images_or_animations_do_not_load
    It is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
    Check the image exceptions: Tools > Options > Content: Load Images: Exceptions
    See [[Options window - Content panel]]
    *A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
    *A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
    *Open the <i>Media</i> tab of the "Page Info" window.
    *Select the first image and scroll down though the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

  • I have a OSX version 10.7.5. On Safari mail I can no longer see the information that usually appears at the beginning of an incoming email, like the date, senders details etc. What do I do to be able to see this again?

    I have a OSX version 10.7.5. On Safari mail I can no longer see the information that usually appears at the beginning of an incoming email, like the date, senders details etc. What do I do to be able to see this again?

    No, I get my mail on my computer, not on a website. I used to be able to see the information but in sorting another issue I must have changed a setting or something. I have gone to View. Under Message Attributes most things are ticked but many of them are not bold print i.e. they are pale grey. I don't know how to activate them again.

  • Since upgrading to Lion i can no longer see other computers in my network and vice versa. What has gone on?

    As the title suggests! I can no longer see any of the computers in my network, Mac or otherwise.
    I have checked sharing permissions on all required computers and all seems to be good and have disabled firewalls.
    I notice a few people have had similar problems with screen sharing but I am not even seeing another station to pottentialy share a screen with!
    MBP 2.4GHz Intel Core 2 Duo
    OS X - 10.7

    Regarding the printer:
    From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
    If that does not help then from braden85:
    This first article is about changing or updating printer software in Mountain Lion, and can be found here:
    OS X Mountain Lion: Change or update printer software
    http://support.apple.com/kb/PH10622
    This next article tells you where to find the printer software for your specific printer brand:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669

Maybe you are looking for

  • F8 Function Key Not Working In DreamWeaver

    No response in the Adobe DreamWeaver forum, so here goes... The F8 function key used to bring up the Files window in DreamWeaver on previous Mac machines, but I'm trying to figure out why it won't on a new installation of Adobe CS3 on a brand new Mac

  • RFC2WS sync - dont see the responce from WS in the xmb_moni

    hello experts I know that a respond is send, but I can not see it in the sxmb_moni. in the RWB I recieve this erros SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault Delivery of the message to the appl

  • The start page of SAP web AS Java is not starting

    hi, i recently installed SAP Solution Manager 4.0 (ABAP+Java) and i cannot access the system information using a browser. my instance number is 02, my server name in sun-test and the ip address is 192.167.1.219 using http://192.167.1.219:50200 or htt

  • Internet Explorer Issues (Visualization problems on 8, 9

    Please i need some help Everything works as it should in Chrome, Firefox and Safari. But with Internet Explorer  8, 9 or even 10 it is making a right mess off the pages.  For some reason text columns appears over images, some png's are missing & and

  • Which is the latest map version for E71

    Hi, I have few questions: 1) What is the latest map version for E71? Where is the link to download the same? 2) How to check my map version? Thanks.