What happened to the automatic spelling in my messaging/tests?

What happened to the automatic spelling in my messaging/texts?

If there is a thin gray bar with a white dash in the middle of it immediately above the keyboard, you can reopen the suggestions by sliding up with one finger on the white dash. May take a couple of tries to get it to reopen.
If that isn't there, you can turn the suggestions on/off by going to Settings > General > Keyboards and turning Predictive to on. If already on, try turning off and then back on.
Another method is to tap and hold on the keyboard switch key (e.g., emoji key).

Similar Messages

What happened to the automatic backup with Iphone 6?

I can not find it anywhere? On my iphone 5 it was in settings manage storage where you set it to automatically backup when connected to wifi, now where is it?

Hello there, greg10.
The following link from the online iOS8 iPhone User Guide provides the information you're looking for:
Back up iPhone - iPhone
http://help.apple.com/iphone/8/#/iph96b1d67c
Turn on iCloud backups. Go to Settings > iCloud, then sign in with your Apple ID and password if required. Go to Backup, then turn on iCloud Backup. To turn on backups in iTunes on your computer, go to File > Devices > Back Up.
Back up immediately. Go to Settings > iCloud > Backup, then tap Back Up Now.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

What happens when the computer get too full of e-mails? Will it automatically start deleting ... or give you some kind of warning?? I never delete personal mail right away since I might want to refer back to it, and then the first thing I know, I've got

What happens when the computer get too full of e-mails? Will it automatically start deleting ... or give you some kind of warning?? I never delete personal mail right away since I might want to refer back to it, and then the first thing I know, I've got a big backlog.

It will not automatically delete any emails; you will need to do that. You may suffer performance issues in Mail if you let your mailboxes become too bloated. And, aside from Mail, the files take up a lot of room are photos, videos, and music, so you might want to watch those - every once in a while, check how much hard drive space you have and make sure you empty the trash regularly. Checking your hard drive space: highlight your Macintosh HD icon on the desktop; hit Command + I and check the total capacity, and how much is left.

What happens when the Time Machine drive is full?

I'm on my second iMac. My first one (G5, 1984) died, and I replaced it early 2010 with an Intel mac. The transition when exceedingly well largely due to Time Machine. I just hooked the Time Machine drive to the new system, and I was soon back up running!
My home folder has 70GB of data. The Macintosh drive has 105GB of data and 395GB free. The Time Machine drive has 220GB used and 30GB free.
1. What happens when the Time Machine drive is full?
2. Do I have control over what backups get deleted?
3. If lightning strikes twice, will I still be able to restore my Intel mac like my G5 mac, even if backups get deleted?
4. Is there anyway to control what backups/backup files get deleted?
5. Any other thoughts?
Thanks.

maxseven wrote:
i have deleted the time machine folders and they are now in my trash. when i try to secure empty my trash it will delete everything but the t/m folders. how do i delete them?
Do you mean all of them? The entire Backups.backupdb folder?
That's a large mess. First, even a normal delete will take a very long time, as there are probably hundreds of thousands, or even millions, of files. Your best bet by far is to simply erase them with Disk Utility -- that will only take a few moments. If your TM drive has a single partition, see #1 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html]. If there are other partition(s) on the drive, see #2 there.
If not, and you only deleted some of the folders, you have a different, worse problem. Unfortunately, Apple doesn't do a very good job of warning folks: +*Never move, change, or delete anything in your backups via the Finder or Terminal.+*
You shouldn't have to delete backups at all, since Time Machine will do that automatically when the disk/partition gets full. But you can do it without harm via Time Machine. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
A normal delete will take a very long time, as there are probably tens or hundreds of thousands of items, each of which must be individually deleted. A secure delete will take much, much longer, as each deleted file must be overwritten with zeros.

What happens when the iphone app won't open on iphone 4?

what happens when the phone does not open and automatically shuts down the phone?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.

When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.
Hi,
I need some guidance here, please.
I have some questions about replication:
When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.
Is possible to automate the failover process? Just like happens in a cluster.
What changes do I need to do in order to guarantee that my clients reach my replica? For example, I need to do a failover to my Exchange Server Replica and I need to minimize the downtime. The same applies for a DC or a SharePoint Server
  Thanks in advanced.

Hi efebo,
“The same applies for a DC ”
As for replicating virtualized DC (Personally,  I do not suggest to replicate DC , even though it can be replicate ), please refer to following link:
http://technet.microsoft.com/en-us/library/dn250021.aspx
"In short, Exchange does
not support the Hyper-V Replica feature. Exchange has a long history of supporting virtualisation from
Exchange 2003 onwards. It is fully supported to install Exchange
2007,
2010 or
2013 as a virtual machine on Hyper-V, but using the Hyper-V replica feature is not supported.
For details please refer to following link:
http://blogs.technet.com/b/rmilne/archive/2013/07/29/exchange-and-hyper-v-replica-support.aspx
I assuming that the "Remote DR site" and the primary site both have public IPs .
Based on my knowledge you can not access replica site VM  directly after a disaster , maybe you need to rebuild primary site and replicate VM back .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Switched phones. What happens to the stolen one?

I switched phones for the time being. What happens to the stolen one? will it still work with the Find my iphone app? Or will is not work since is is not activated? It was previously suspended until I switched to an old phone. Is this phone still suspended or was it the account that was suspended?

DBAG65 wrote:
No. It's on the automatic "Standard Exclusion" list, along with various system caches, workfiles, system logs, etc
Are you sure?
Yes.
I may be wrong, but TM wont let you select something unavailable for back up while you're using the "exclude" preference. Unavailable items are grayed out.
Only TM volumes and volumes not formatted OSX Extended are shown that way.
You do have to click show invisible items but the .trash file can be manually selected for exclusion. That seems a fair indicator that by default TM is backing up your trash.
No. Previous System folder, most system caches, swap files, logs, etc., are automatically excluded.
See System/Library/CoreServices/backupd.bundle/Contents/Resources/StdExclusions.pli st

What happens to the open item in bsid table when it is cleared

hi experts,
i have a doubt about open and cleared items of accounting documents. as we know open items of customers are stored in bsid and cleared ones in bsad. For suupose, an open item is closed ina particular period then what happened to the entry in bsid and bsad table. an entry regarding is stored in bsad (cleared),and what happens to the entry in bsid, still it will be there or removed from it.

Hi,
When ever we clear the document(Complete payment) that document will be moved to BSAD table. Other wise it will remain in BSID.
If u are making partial payment then all the partial payment documents along with original document will be stored in BSID till u made the complete payment for that invoice.
Assumption is u have to give all partial payment documents made for particular invoice item while u are making complete payment in F-28 transaction. So that these partail payment documents will also be cleared while making complete payment and moved to BSAD table.
This trasaction can be used for both partial and complete payments.
Irrespective of complete or partial payments made all the documents will remain stored in BKPF and BSEG tables.
BSID and BSAD are index tables to address performance issues with BKPF and BSEG tables.
So all open and cleared documents will be there in BKPF and BSEG tables.
All cleared documents will be there in BSAD table.
Alll open documents will be there in BSID table.
Hope it is clear.
Thanks,
Vinod.

What happens to the mail in my iMac after I delete it from my iPhone? Will it be deleted from my computer as well?

What happens to the mail in my iMac after I delete it from my iPhone? Will it be deleted from my computer as well?

If they are both using the same iCloud ID (assuming you are running your mail from iCloud), then yes, the email will disappear from your Mac after you delete it from your phone and after your phone sycs with iCloud and your Mac syncs with iCloud.
I use a windows phone, but it works the same.

Just upgraded to 5 from 3 - what happened to the page select icon? Can't find it in customize toolbars.

Used to be you could select which page you wished to go back or forward to from the arrow icons on the navigation toolbar. The history menu item only shows 10 sites without having to open history for today. What happened? Is there another icon or a new plug in for this functionality? I used it all the time.

''what happened to the page select icon (Back/Forward)''
The back/forward buttons have been moved to right-hand side of the navigation bar and the drop-down was removed. User right-click or hold click for one second to see the tab history. This is item #5 in my list.
The History menu also has "Open Previous session" and "Open closed windows",
to see more history use the History sidebar ("Ctrl+H") or the History Library List ("Ctrl+Shift+H") and sort or view by "Last visited".
You can make '''Firefox 5.0.1''' look like Firefox 3.6.19, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 5.0.1, or 4.0.1, look like 3.6.*)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

E4X: What happens to the root element?

I'm working with XML using the E4X notation. I'm used to the "old school" XML APIs that use DOM and I'm a bit confused.
For example, let's consider the following XML
<mx:XML id="myXML" >
<top>
    <sub1 id="uno">
      <sub2>hello</sub2>
      <sub3>world</sub3>
    </sub1>
    <sub1 id="duo">
      <sub2>ok</sub2>
      <sub3>ko</sub3>
    </sub1>
</top>
</mx:XML>
In my code I use the following traces. This is done with the De MonsterDebugger, but all others should work the same way. I have casted the traces to String only to make it easier to ask this question (no need post images)
MonsterDebugger.trace(this, "myXML:" + myXML);
MonsterDebugger.trace(this, "myXML.sub1: " + myXML.sub1);
MonsterDebugger.trace(this, "myXML.sub1.sub2: " + myXML.sub1.sub2);
What I get as output is
(String) = myXML:<top>
<sub1 id="uno">
    <sub2>hello</sub2>
    <sub3>world</sub3>
</sub1>
<sub1 id="duo">
    <sub2>ok</sub2>
    <sub3>ko</sub3>
</sub1>
</top>
(String) = myXML.sub1: <sub1 id="uno">
<sub2>hello</sub2>
<sub3>world</sub3>
</sub1>
<sub1 id="duo">
<sub2>ok</sub2>
<sub3>ko</sub3>
</sub1>
(String) = myXML.sub1.sub2: <sub2>hello</sub2>
<sub2>ok</sub2>
All is fine above and this was a bit long abstract for my question. The question is what happens to the root element, in this case <top>? I was trying to access the data with the following notation
myXML.top.sub1; // etc
I spent quite a lot of time trying to get it to work, until I discovered that the root element is not used. Can anyone explain this?
Or, I guess the simple explanation is that the root node is ignored and the sub nodes are created as properties of the object. The question also could be stated as: Why isn't this documented in the Flex API Reference?
Thanks.
P.S. I found this article on common E4X pitfalls which also has other interesting topics when working with E4X.

its gone
downgrading would kill the phone..

What happens to the original photo after editing? Does it get replaced by the edited photo?

I just bought my first iPhone(5). On Android, when editing a photo, the original stays in your gallery and the edited photo gets placed right next to it. So what I want to know is, When editing a photo in the photo app, what happens to the original since it would be nice to be able to make different edits of it.

That is an excellent question. This is definitely not the programmed behavior of Photoshop Elements. Normally, when you edit a file, a new copy of the file is created (the original is simply left alone). This new copy of the file will have "_edited-1" added to the end of the name. It should definitely not be adding $ to the name at all.
Just as a test, create a new user account on your computer, and try editing another image to see if does the same thing there. However, I suspect there is another application on your computer that is modifying how files are saved, deleted, and renamed.

What happens to the while loop iteration counter if it runs unchecked?

I want to use the iteration counter to initialise a value on the first loop of a while statement. ie i = 0, x = 100. Fine. The application I am building will be left to run for weeks or months on end without stopping (hopefully :¬)). What happens to the iteration counter in this situation? Does it reset to 0 or what? I don't want it reinitialising any values while the loop is running other than when it starts.
I set up a while loop to try to figure out what happens and the iteration counter stops at 2147483648 which is 2^31 - 1.
Any help would be appreciated,
Thanks,
Niel.

It might be something you already looked at, but perhaps it's an option to perform the initialization outside (before) the while loop. That way it will be initialized correctly only once, no matter what the iteration counter does.
Of course if you need the counter for other purposes than initialization you might have the same problem...
Note that a lot of the timer functions also overflow after a certain time (I believe 24 or 48 days?) so be careful running very long loops (but you already knew that probably).

TS2972 I just updated all of our computers to itunes 11 and now when we try to use our home sharing, we can't import songs. What happened to the easily located "import song" feature? I wish now that I wouldn't have updated to the new itunes 11.

I recently updated all of the computers in the house to itunes 11. Now when we try to import songs from homesharing, we are unable to. What happened to the conveniently located "import song" button on the old version of itunes. Please help an old mother out please!

diesel vdub, i use 11.1.1
solved the issue today. first sync with itunes, so all the stiff you bought on the mobile will be backuped.
1. uncheck sync music in itunes and sync. all the music will be erased from mobile device
2. check music player on the mobile device. just the unwanted songs will still be there
3. go on the iphone to settings, general, usage, music player. there is just a few mb from the remaining unwanted songs. swipeleft and erase the content. switch iphone off and on again
4. repeat step 2. there will be no data. otherwise repeat step 3
5. check sync music in itunes and sync. all the music will be back again but not the unwanted songs.

What happened to the "closed tabs" list in 4.0 RC2?

What happened to the "closed tabs" list in 4.0 RC2?
In prior versions of Firefox, I could open a list of closed tabs, but I can't find the button now.

Hi g,
Many features have been lost in Numbers 3. You can send feedback to Apple with Menu > Numbers > Provide Numbers Feedback.
And... playing the Devil's Advocate, have a look here:
Features that Apple has promised to reinstate:
http://support.apple.com/kb/HT6049
Hints on workarounds here:
https://discussions.apple.com/message/23622372#23622372
What has been GAINED in Numbers 3 is here:
https://discussions.apple.com/thread/5473882?start=75&tstart=0
What has been lost in Numbers 3 is here (with corrections where Apple has already reinstated some lost features in the Numbers 3.0.1 update):
https://discussions.apple.com/thread/5470448?start=240&tstart=0
I enjoy running both versions of Numbers (Numbers 2 and Numbers 3) at the same time. They each have strengths and weaknesses.
Numbers 3 did not replace your Numbers 2 (Numbers '09). Look in a folder called iWork '09 inside your Applications folder. And enjoy.
Regards,
Ian.

What happened to the automatic spelling in my messaging/tests?

Similar Messages

Maybe you are looking for