What is a Aggregate rollup monitor and a Dependancy rollup monitor

Hi All,
Can any one explain in simple what is a Aggregate rollup monitor and a Dependency roll up monitor in SCOM ?

Aggregate rollup - Sums up all the monitors below it in some way. (you can report the status as best health
state of any member or % of members in warning/error ie 50% so if there are 4 members below it 2 of them have to be in error for the parent monitor to be error)
Dependency - The health is this depends on that status of everything below it.
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

What is the difference between Message Monitoring and End-to-End monitoring

Hi experts,what is the difference between Message Monitoring and End-to-End monitoring? and What is the difference between Value Mapping and Fix value?
Thanks,
Manoj

HII
You use message monitoring in the following cases:
● To track the status of messages
● To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
● If you want to monitor message processing steps in a number of SAP components (to be configured).
● If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
also refer this doc...gives more insight on various monitoring:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
... End-to-end monitoring in SAP XI provides a graphical overview of the different XI
components and the message flow between them. It is based on the Process Monitoring Infrastructure (PMI).
ans also
http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.

Difference between Message monitoring and end tot end monitoring.

Hi,
What exactly is the difference between message monitoring and end to end monitoring?
I read that message monitoring is used by end to end monitoring. Then why do we have two separate monitoring options?
Thanks
Hari.

End-to-End Monitoring
You use end-to-end monitoring in the following cases:
●      If you want to monitor message processing steps in a number of SAP components (to be configured).
●      If you want to monitor the path of individual messages through these SAP components, from start to end.
Message Monitoring
You use message monitoring in the following cases:
●      To track the status of messages
●      To find errors that have occurred and establish what caused them
for detail see this
Message Monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/frameset.htm
End-to-End Monitoring
http://help.sap.com/saphelp_nw04/helpdata/EN/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm

Connet a thunderbolt monitor and min display port monitor to a mac mini

I have a new late 2012 Mac Mini. I also have an exisiting Apple mini display monitor and just got a new Apple thunderbolt monitor. How do I get these both to work with this Mac Mini so I can have dual monitors? I read something about an external thunderbolt drive. How would that work and what product should I buy that has all the ports on the back? Thank you for the help.

Unfortunately a Mini Displaport monitor will not work when connected via a Thunderbolt display. Nor will a Thunderbolt display work via a Mini Displayport monitor.
See http://support.apple.com/kb/HT5219
You could use a DVI or HDMI monitor in addition to the Thunderbolt display, or you could use two Thunderbolt displays. You could sell your old monitor and buy another new one.

T430 support P2815q 4k Monitor, and another Sub HD monitor

Hey All,
I am looking to get a P2815q for work. need the extra work space for productivity. What I am concerned about is whether or not the laptop will be able to drive that monitor, plus the existing 1680x1050 monitor I currently have. I tried to check Intel website for HD 4k max resolution, however, they report that max resolution is dependant upon individual laptop design. Tried to look up on Lenovo site, and max specified is 2560x1600, which coincidentaly is the most common high resolution monitor resolution. I suspect this is not a hard limitation.
If anyone knows, and can help me out that would be great.
Thanks Much
Mikel.

Bump.
Exactly same monitor but for the T440s. Lenovo specifies the same limitation of 2560x1600. I could order from Dell and try, but it's not like I have tons of free time on my hands to return the monitor if it doesn't work.
Thanks,
- Ryan

RWB-Message Monitoring and End-to-End Monitoring

hi
Can someone explain the differences between Message Monitoring & End-to-End Monitoring through RWB. I see both of them displaying the messages status with better descriptive with End-to-End Monitoring.

HI Chandra
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

TV Apple TV MacBook Air:How to connect my computer's monitor and TV as multiple monitors (NOT mirroring)

I have an insignia TV, an apple TV I just bought less than a month ago, and a Macbook Air (mountain Lion) and a MacBook pro (mountain lion).
I am able to connectboth of my computers with the TV to mirror my screen/monitor, but I have not been able to figure out how to use the apple TV to use my TV as a second monitor, like I was able to do with my HDMI cable.
when I bought the Apple TV the person who I talked to at the store told me I would be able to do it, but I havent been able to do it through system preferences and the options for display only show as mirroring through Airplay. I dislike mirroring because while I play something on my computer (or somebody else does) I'd like to still be able to use my computer for browsing or doing homework.
Please help me find a way in which I can make my TV as a second monitor tu my computer without having to have an HDMI cord across the room. I have a puppy and I have had problems with that. That is actually the reason why I considered buying the Apple TV device.
NOTE: In case you know a way to connect my TV to my Macs I have a time capsule and my TV has a DVI, two HDMI, and a USB ports.
thank you!
Lydia

Morning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario

Assistance needed with new monitor and printing from LR3

I just purchased a new IPS monitor. I have calibrated it using the HP Display assistant that came with it. It is an HP ZR 22w. I saved my calibration as a preset - however - this is not appearing as a profile when I try to select it in the print module. the checkbox for "include display profiles" is ticked. If I allow the printer to manage - the pictures are much warmer than on the IPS display. My printer is a canon mg6120 and I am running windows 7. I would appreciate any assistance that anyone can provide. Thank you

I think the "HP Display assistant" is a software tool, is that right?
Ideally with Lightroom, you should use a hardware calibration/profiling tool (Spyder, Eye One, Color Munki etc). In particular, you need a monitor profile that contains colour space information. I had a look through the HP Display Assistant user manual, and it appears the software does calibration but it probably doesn't put colour space info in the profile. It'll be better than nothing, but a hardware tool is better.
However:
I saved my calibration as a preset - however - this is not appearing as a profile when I try to select it in the print module. the checkbox for "include display profiles" is ticked. If I allow the printer to manage - the pictures are much warmer than on the IPS display. My printer is a canon mg6120 and I am running windows 7
This is not what you want to do! The profile that the HP Display Assistant creates is for the monitor, and only for the monitor. It gets the right white point and tone curve for the monitor. What you need in the profile drop-down in LR print module is a printer profile, not a monitor profile (except on very special circumstances).
I'm not familiar with the MG6120, but when I googled "profiles for canon mg6120" I got a lot of hits, so I assume profiles are available. It's quite likely that some came with the printer driver, and were installed with the printer software. When you select "profile" in LR print module (you may well have to go to "Other..." to see them all) then there should be profiles for the printer - possible lots of them - one or more for each paper type. If they're not there, see the Canon documentation (or google it) to find out how to load them.
If you can't find any profiles for the printer, then try using sRGB (or probably it's "sRGB IEC..."). Without colour management, your printer will probably expect sRGB images, so this should be roughly right, but a specific profile for the printer is better. This is one of those very special circumstances when something other than a printer profile (and sRGB isn't a printer profile) may be better than nothing.

How to use two external monitors and Tecra M5

Hi ,
I've been used to work with two 17" monitors connected to a computer in extended desktop monitor view, ii've just changed Job and now i have the following setup:
a Toshiba Laptop connected to Toshiba Tecra M5 dockstation and one external 17" monitor connected to dockstation digital port that works fine.
I also have connected another external 17" monitor to the Dockstation RGB port but keeps black
I'ts really awful to work like this switching between the 17" monitor and the small toshiba laptop monitor.
What i'd like is to work with the two external 17" monitor, and keep the laptop monitor off, or if possible on.
Any ideas???
Any help will be very wellcome
Mari PAz

I have an M11-17V, and the docking station that came with it has 2 monitor outputs, analogue and DVI. I wondered what it would do if I connected a monitor to both. Windows recognised that it was faced with 3 screens (including the built-in one) and asked me to choose which 2 of the 3 I wanted it to use.
I was disappointed it would not allow me to use all of them TBH, but if your docking station is the same, it might answer your question.

Does System Center Update Rollup 4 also contain Update Rollup 3 and Update rollupt 2, etc

Hi,
Does System Center SP1 Update Rollup 4 also contain Update Rollup 3 and Update rollupt 2, etc?
Can I go from Update rollup 2 and apply update rollup 4 and get the updates in 3 as well?
Thanks Lance

Hello!
Yes, the previous updates are included in UR4, so there is no need to install UR3 if you are going from UR2 to UR4.
By the way, the latest update rollup for System Center SP1 is UR5: http://support.microsoft.com/kb/2904730/en-us
Markus Bölske, Lumagate. www.lumagate.se Blog:
www.opsmanager.se|www.scdpm.se

DUAL MONITOR BUG: One Picture – One Monitor – Different Colors!

There have been several threads discussing that Photoshop CS4 and OS 10.6. show wrong colors in dual monitor setups.
The first one to prove this with a screen capture was jb510-LJ0JJQ in August 2009: http://forums.adobe.com/message/2207312#2207312
Eight months and three OS updates later the problem is still there and makes professional work with more than one monitor a nuisance.
Here's another actual example: A picture and its 100% identical copy showing different colors on one screen!
Here's how to repeat it – try this at home ;-)
1) In the finder make a copy of a rgb picture.
2) Open one of the two identical pics in photoshop.
3) Drag it to the other monitor.
When releasing the mouse button you may see the bug already: the colors will "switch".
4) To verify this go to system presets - monitors - and change the primary monitor (by dragging the menu bar to the other)
5) Now open the identical copy you made in step 1) and see the difference!
Here's a synopsis of suggested workarounds:
1) disable open GL (which seem to makes no difference on my setup)
2) click "desaturate monitor colors" but set desaturation to 0 (which prevents visual switching in step 3) (only if openGL is ON) but also leads to a wrong display in step 4+5
3) make the hardware calibrated monitor your default monitor and strictly avoid changes or dragging pics to the other monitor (which seems to be the only reliable method)
4) some guys even force both monitors to use the profile of their hardware-calibrated monitor (using color sync) to make sure they see what they should see on at least that one monitor. What a stone-age workaround for the the world's leading imaging program!
Considering that reliable colors in professional (=multi monitor) settings should be the most basic function of photoshop this mayor malfunction should be solved with CS5! Otherwise we might have to live with it for some more years...
Have Adobe and Apple realized this bug and on their agenda? Will it be gone with OS 10.6.3? Can anyone explain the reasons for this bad bug? Is there a "officially" recommended workaround?
Thanks, regards,
Eric

There have been several threads dealing with this malfunction. But most faded out in silence or acceptance of the workarounds.
http://forums.adobe.com/message/2207312#2207312
http://forums.adobe.com/thread/521483
http://forums.adobe.com/message/2272192#2272192
http://forums.adobe.com/thread/311761?start=0&tstart=0
http://forums.adobe.com/thread/618927?tstart=60
http://forums.adobe.com/thread/603992?tstart=90
http://www.wetcanvas.com/forums/showthread.php?t=552977
http://www.hilfdirselbst.ch/gforum/gforum.cgi?post=368889?search_string=zwei%20monitor#368 889
But man, this is no minor bug! Consistent colors are the by far most important basic function of photoshop. If you cannot rely on the colors in photoshop you can as well use "Preview" and "Word" for print production ;-)
Carson, how did Apple react to your complaint? What do you mean with "they don't get it". Do they not see it? Or can't they get it right?
Shall we open a thread at apple forums to point out that it's not the problem of a single user?

What is difference between BP monitor and supplier monitor?

hi friends
what is difference between BP monitor and Supplier Monitor
what is tcode for BPmonitor
Regards
Vinny

Hi Vinny,
Please refer to the following links. These seems useful:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f051efda-bc58-2910-3785-e60d1f798c96
The specified item was not found.
New Business Process Monitoring functionalities in SAP Solution Manager ALE / IDoc Monitoring
Regards,
Saumya

What is the diff of Solution monitoring and E2E Root cause analysis

Hi,
I want to know what is the different for Solution Manager Solution Monitoring and End to End root cause analysis. Currently we have implemented change management and Implementing and Upgrading SAP Solutions, if i would like to explore the solution monitoring, and end to end root cause analysis, what is the steps of configuration i need?
if i would like to have a check on the system whether is performing well, or setup the functionality of sending alert when system is having problem, which feature would be better? end of end functionality or Solution Monitoring?
Please advice..
thanks
-Fung

Hi,
If you have PI system in your landscape, I would strongly recommend to upgrade to SP15.
Trace monitoring for PI is to be available from SP17 (Not yet released)
Check [this Link.|http://service.sap.com/e2e].
Hope this solves your problem.
Feel free to revert back.
--Ragu

HT3014 my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.

my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.
my laptop is a 2008 model

Hmmm... 2008 MBP has...
Video (Monitor): 1 (DVI)
Details: Supports external display in dual display and mirroring modes. VGA output provided by included Apple DVI-to-VGA adapter, S-video output provided by optional adapter (sold separately).
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .5-15-early-2008-penryn-specs.html

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for? Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for?
Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?
I do not have any VPN enabled?

Do you happen to have an Android? If so and depending on what version there is a great data usage analyse tool built-in. See if you can go to Settings -> Data Usage from there you can pick a current or previous billing cycle and then use the vertical sliders to select a date range and it will filter the usage data per app to show you exactly what app(s) were using data during that time frame.

What is a Aggregate rollup monitor and a Dependancy rollup monitor

Similar Messages

Maybe you are looking for