What is apm system?

hai
i have a dought that what is an apm system,
what is difference between apm system and legacy system.
in layman terms can any body explain me what is legacy system.
what systems are grouped under legacy systems.
in case of apm systems do we need to have any configuration needed (like sap systems)
send me detial informatiom plz.

HI Sandeep,
Check these two links for APM:
<a href="http://www.bakbone.com/products/application_data_protection/sap/">http://www.bakbone.com/products/application_data_protection/sap/</a>
<a href="http://www.forrester.com/Research/Document/Excerpt/0,7211,36504,00.html">http://www.forrester.com/Research/Document/Excerpt/0,7211,36504,00.html</a>
Kudos to these sites.
Regards,
Subhasha Ranjan
Message was edited by:
Subhasha Ranjan

Similar Messages

What are the systems variables in oracle

Hai All
In oracle what is called system variable and types of system variables
Good answer hepls me
Thanks & Regards
Srikkanth.M

SET System Variable Summary
Source:http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12040.htm
Oracle environment variables
The following environment variables are valid for Oracle::
ORACLE_HOME
ORACLE_BASE (optional)
ORA_NLS (optional)
NLS_LANG (optional)
TNS_ADMIN (optional)
Source:http://publib.boulder.ibm.com/infocenter/db2luw/v9/index.jsp?topic=/com.ibm.websphere.ii.foundation.conn.fw.orc.doc/configuring/iiylsorcenvvars.html
ORACLE_SID is the name of the database instance that you are using.
T2KDEV is set to the type of terminal you are using; sun if you are using openwindows; xsun if you are using X windows.
TERM is set to the type of terminal you are using. Note: If you are using openwindows, you may have to redefine the variable TERM to sun (instead of cmd-sun) and you should execute ORACLE from a shelltool.
TWO_TASK is set to the location where ORACLE server can be found and will normally be the name of the database instance. This variable helps simplify the command line for starting ORACLE tools.
Source:http://ugweb.cs.ualberta.ca/~c391/manual/chapt3.html
HTH
Girish Sharma
Edited by: Girish Sharma on Mar 3, 2010 9:16 AM
Link and Text added.

How do I determine what the host system is?

dnsstuff.com used to have an option to reveal what type of
system
running under what type of OS is being used by a domain's
host. The
option is gone. I need to search for scripts, but do not know
if the
current web host for the site is Microsoft, unix, etc.
What utility (or web link) can be used to reveal the type of
system
and OS a site is sitting on?
Thanks,
-CH

> without comment or remark.
I have been known to remark from time to time. It's only
sometimes
successful. I guess I am a poor remarker. 8) But thanks. Look
it up. It's
completely passive and called "Server Spy".
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Canned Heat" <[email protected]> wrote in message
news:[email protected]..
>I am not familiar with the FF extension, but I will
google it and find
> out. Again, thanks for your help, Murray. You are a
valuable
> resource to this group because your answers are always
right on target
> without comment or remark.
>
> To the reply from Dan mode: I cannot call because it is
a potential
> new customer. They are clueless and the time I would
have to spend on
> the phone getting the right answers would be much more
than would have
> to be spent using a simple utility. That being
explained, do you have
> any useful info, name of utilities, or website that I
can utilize to
> reveal the host system and OS of a domain?
>
> Thanks,
> CH
>
>
> On Fri, 28 Apr 2006 16:16:55 -0400, "Murray *ACE*"
> <[email protected]> wrote:
>
>>I use the FF extension that stick that info in the
status bar. Handy,
>>that....
>

What is business systems and services?

Hi Experts,
What is business systems and services and where are they prefered? and tell me the diff between them...
Regards,
Mahakrishnan T.

Hi
Business System
1) Business system is a logical system, and there is an importance on physical existence of the system.
2) Also SLD entry is required.
3)It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
4)This is defined as part of the SLD and is a physical system whose parameters are well defined.
5(Business systems refers to the physical systems, for instance the R/3 system. You define the business systems in the SLD
Business Service
1) You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
2) Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
3) It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
4) This is not defined as part of SLD and whose technical parameters are not completely known.
5)Business service is used when the message is not addressed to a business system. It is used mostly in B2B scenarios.
Regard's
Chetan Ahuja

HT1338 how do i tell what my operating system is?

how do i tell what my operating system is?

Click on the Apple at the upper left and choose About This Mac. Your version of OS X will be shown.

What are the system ports that XI uses to invoke web services?

Hi guys,
Anyone knows what are the system ports that XI uses to invoke and to be invoked from web services?
I think it uses the port of AFW but I dont have sure
Thanks in advance,
Ricardo.

hi,
if you want to invoke a WS on the XI use
the j2ee port (5XX00)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

What iMacs run System 9 software in Classic Mode and also iLife in Sys 10?

I understand that there were versions of System 10 that ran on iMac G3s that would run old System 9 software in Classic Mode, and also would run iLife (special interest in Garage Band and iMovie). What model of iMac would do this? What hardware requirements should I look for? What would be the optimal configuration to do what I'm trying to do?
Can I hook up an external floppy drive to an iMac? Are those drive still easily acquirable?
What versions of systems 10 ran in Classic mode? I've heard that System 10 with Classic mode can be buggy. How significant is this? When did System 10 stop running in Classic mode? Is it traditionsal to get System disks included when you buy an iMac off of eBay?
Thanx.

Ed,
The last version that would boot into classic is 10.4.X (.11 last version). That said I was never a fan of classic mode. It never seemed right to me that's why I set those few up as dual booters. They were used in a classroom with pre k thru middle school kids.
If you are using classic mode and it runs good for you than go for it.
My computer at school runs at 600 Mhz and has 256 Mb of memory. How much memory would you suggest.
Tiger will actually run at 256 but would be better at 512 or 768.
How would a machine like that do as part of a wireless network?
It should do fine. It will need a special adapter (which I can supply) and the original Airport Card.
Could it be connected to a network that's administered by a PC?
Should be no problem. Our's is set up that way and wireless Macs work fine. The problem I've seen w/ PC administered networks is the Administrator him/herself.
what is a G3 slot loader?
There were two types of G3 iMacs, the early tray loaders and the later slot loaders.
700 and 800 eMacs will also run OS 9.
So I just upgraded our music room at the school. It has iMac G3s 450 - 600s, eMac 1.25s, G4 Minis and Intel Minis. So we're running iLife 09 and 05.
Garage Band 09 will only run in 10.5.6 and that will only run on a G4 or better w/ a processor 867 MHz or faster. My son runs it on his eMac 1.25 GHz w/ 1.5 GB RAM.
Oh for your kid check out Kid's Pix 4 it runs in either OS. Our kids are also crazy about Zoombinis.
Richard
Message was edited by: spudnuty

What is whole system replacement

I have searched everywhere but I cannot find an explanation as to what this is so could someone please tell me what a whole system replacement is. I only know that it is a data recovery method. I also know that it is used after a disaster occurs in an
organization as part of their disaster recovery plan

Hi,
Yes, based on my knowledge, whole system replacement would mean if huge disaste happened to your system and you could no longer use it, then the whole system would be replaced for you.
In windows 7, you can backup your personal files and create a system image, which can avoid such disaster in case your system is damaged or you upgrade to other windows version.
More information about Windows Backup and Restore, please refer to these articles:
http://windows.microsoft.com/en-us/windows7/what-is-a-system-image
http://windows.microsoft.com/en-us/windows7/products/features/backup-and-restore
Andy Altmann
TechNet Community Support

What is 4 system landscape

Hi to all,
May i know what is 4 system landscape? I can't get it,
I have faced it in an interview, plz help me in this way.
Thank u

Hi Ravi,
XID - XI development system.here we can develop the objects.
XIQ - XI quality system.
here we can test the objects developed in XID.
XIP - XI production system.here we use the objects for real time.
And another is Sandbox - this system is used for training purpose.
Reward points if this helps.
Regards
Vani.
Edited by: Vani on Apr 28, 2008 5:19 AM

What is the system variable to find the name of the current window in S.F

hi
what is the system variable to find the name of the current window in S.F

Hi ,
SFSY_PAGEWINDOW
regards,
Prashant

What is the system variables of document number in General Ledger PLD?

Dear all,
Would anybody kindly tell me what is the system variables of document number in General Ledger Print Layout Designer?
The default print layout use transaction number (system variables 272), however, my client wants document number to be displayed in the transaction number column.
Regards,
Simon Chiu

Hi
The only list available for Supported variables is for the version 2007A and for some specific localizations like Brazil and India.
For the 2007A version the list is available in the following link:
http://service.sap.com/smb/sbo/pld
'How To Use the PLD Variables File in Release 2007 A '
But in general the variables are for documents not for reports.
In this case I believe there's no variable and you may need to fill a requirement in the Forum for that.
Paulo Calado
SAP Business One Forums Team

What is r3 systems and landscapes ,

hi
what is r3 systems and landscapes , what is diffrence between this

Hi Shivaji,
R/3 System is a Set Of Layers 1. Application
2. Data Base
3. Presentation
Where u can get in touch in one shot.
R/3 system
R/3 System Architecture
And Lanscape is depend upon Client
See thre Below Links
Landscape
Re: Land Scape...?
Reward If Helpful..
Regards..
Praveen Kumar.D

What Mac operating systems work with Indesign CS3?

What Mac operating system will work with Indesign CS3? I have 10.5.8 and need to upgrade to 10.7 so that my new laser printer will work with my Mac.
If one buys a new Mac 10.8 or 10.9 will ID CS3 work?

Maybe…maybe not. It certainly won’t be supported and under no circumstance should you use migration assistant to move it to a new machine. With that I can almost assure you it won’t work.

What version control system you use?

We are 20 developer and we use bitkeeper as a version control system.
But we have 4 envirronnement.
dev/test/pre-prod/prod.
Sometimes, 2-3 projects are affecting the same packages.
And different packages version is all over the place since we have 4 envirronnements.
What version control system you use for packages?
Would be cool to have a version control system intergrated to our tools, like toad, pl/sql dev or sql developer, is there one for those tools?
Is the tool you using it doing all you want it to do?
Have any link for me to check out?

Hi,
I recommend SourceAnywhere Standalone to you. It is an SQL-based source control application that provides all of the key features of VSS, plus much more. It is well integrated with Microsoft Visual Studio 6/2003/2005/2008, Dreamweaver and Eclipse. Here is the home page of SourceAnywhere Standalone:
http://www.dynamsoft.com/Products/SAWstandalone_Overview.aspx
The Hosted edition, SourceAnywhere Hosted that is delivered as a SaaS application is also available.
http://www.dynamsoft.com/Products/SAWhosted_Overview.aspx
You can take a look.
Thanks,
Catherine Sea
www.dynamsoft.com
the leading developer of version control and issue tracking software
Message was edited by:
Catherine Sea

What are the System Requirements for Web Server hosting Adobe Air application

Working on a project that is using Adobe Air . The Adobe support site has system requirements for the client side application, but for the server side, what are the system requirements?
Using a Windows server, would expect to have approx. 100 concurrent connections at any given time.

Adobe AIR applications are installed on the end user's computer. They are not hosted on a web server. You can deploy an AIR file, which is the installer file for an AIR application, via your web server.

What is apm system?

Similar Messages

Maybe you are looking for