What is backed up if you are using iTunes and Windows
I am wondering what is backed up.
Music can restore from iTunes but what about calendar and contacts and photos if they were manually created on the phone. Are they stored someplace during sync and then can be restored?
Where might this info be stored on the PC if I were to have data backups and want to include this data in the backup?
If you are syncing everything with your computer then nothing will be lost. Everything that is created on the iPhone should be syncing to your computer.
Similar Messages
-
I have an ipad 2 WiFi. I was in the hospital having surgery and forgot my password. I tried several times but couldn't get it. I ended up disabling my ipad. There are important pics n notes in there that I need. How can I get back into it without using iTunes (because I bought it second hand, off ebay) and without losing all my saved items. Please help me!
If it's disabled then it's too late to copy any content off it or to take a new backup, you will have to reset it back to factory defaults by connecting it to a computer's iTunes : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Have you been backing up to the cloud ? If you have then after resetting it back to factory defaults you can restore to that backup : Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
If you bought it second hand then had the previous user removed their account from Settings > iCloud (and had Find My iPad enabled) on it ? If not and the iPad is on iOS 7+ then you will have to contact the previous owner to reactivate the iPad after resetting it : Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support -
How do you see what version of PDK you are using?
how do you see what version of PDK you are using?
I'd like to know where I can look to see the full version number and understand what version I am on.The Release Notes document (pdk.release.notes.html) contains the version information.
Tugdual Grall has a great blog on additional ways of specifying your PDK/OC4J versions.
Peter -
When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up. Do I need this software? Can I just download the pictures to my Mac without using the Canon software?
When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
Do I need this software?
Probably not - exactly what about it do you want?
Can I just download the pictures to my Mac without using the Canon software?
Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
LN -
When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?
Do you have a license for InDesign?
-
I spend quite a few months each year in Canada where I use a Telus Cellular Hub device which is also my WiFi Router. My iPhone 5 has Cellular Data set to "Off" which insures I won't be charged via my Verizon Wireless Service Provider for charges while in Canada. Trouble is Telus, Rogers and all the Canadian Internet Providers charge for all Data going through their Systems. Again, My Cellular Data on the iPhone 5 is turned off, but I use WiFi for such things as checking the Weather, or FaceBook, or searching the Web.
I believe that things may be happening in the background from various Apps that use quite a lot of Data. It could be that iCloud is part of the issue with things being backed up automatically. It also could be that Apps like AP or other News Apps are sending large amounts of Data in the photos associated with their New Stories, etc. I typically turn off the App Store "Updates" such that they don't automatically load. The FaceBook works now posted videos play when you are just scrolling through the News Feed.
I have been trying to fine an article somewhere which focuses on this specific problem but unfortunately many if not most articles are about folks worried about using Cellular Data while in a WiFi environment when their Cellular Data is turned on.
Does anyone know of a fairly comprehensive article about what settings on which Apps might reduce the Data Usage when Cellular Data is turned "Off" but you are going through a Service Provider who charges for all Data Accessed even when you are using WiFi?Thanks for your comments, it is clear you understand my plight. The trouble is fully understanding what Apps and App Features are transferring data in the background any time you happen to turn WiFi to on (even if you have had it off most of the day or night). Obviously things like Location Services can constantly be sending and receiving data from my iPhone without any action on my part. Also if you have things like photo backup on the iCloud then each time you take a photo you are sending a copy out. All App Updates if set to Automatic also can add up to quite a bit of Data. Reading the News on AP or scrolling through FB News Feed is actually adding up to a lot of Data. There could be other culprits that I am not even thinking of. I don't want to turn Apps like Find My Phone off or turn iCloud off due to loosing the value of such a program entirely. Again thanks for your quick response.
-
I'm subscribed to iTunes Match but when I turn it on I get this message:You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 85 days. What can I do?
I had this happen back in December/January. I sold my MBP that I used to subscribe to iTunes Match back in December. In January, I bought a used MB and tried to use iTunes Match on it. I was told I had to wait nearly two months to use it on the new computer. I waited and was finally able to use it in the new computer.\
Sadly, this has more to do with the content providers (Record lables / movie studios) than it has to do with Apple impsoing the restrictions. -
How to find what type of middleware product we are using in SAP CRM ?
Hello All,
Ca anyone help me in getting the information for the following :
1) How to find out what type of middleware product we are using in our Project? ( Currently our SAP CRM version is 4.0 and the middleware is using for R/3 to SAP CRM and vice versa)
2) Do we have a product called u201CMessaging wareu201D used in SAP ?
Kindly revert at the earliest .
Cheers
SreedharHi Sreedhar,
What you've mentioned is exactly the task of CRM Middleware, which sits on the CRM server and governs the data flow.
By any chance are you trying to find out about DOE(Data Orchestration Engine) used by SAP NetWeaver Mobile ?
maybe this link would help then:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/7f/c9391404c74fabb8ccc321bac64e8d/content.htm
-Rohit -
Can you unplug the external hard drive you are using for time machine
can you unplug the external hard drive you are using for time machine and then plug it back in and it work normals because i have a mac book and don't want to always be carrieing the external hard drive every where i go so can you ?
Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.
-
The version of GroupWise you are using cannot access this post office
I built a new Server and added it to my PCSD Tree. The new server name is
GroupWise and has an IP Address of 10.10.0.13.
I followed the GroupWise 7 Installation Guide and installed GroupWise to
this server. At no point did I find any place to enter the GroupWise
License.
During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
However the larger problem is this: I can not login to the GroupWise
Server. Below are two screen shots of what I’m getting when I
launch the GroupWise 7 Client. When I look at the .NLM loaded on the
Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
message in the message window “The version of GroupWise you are
using cannot access this post office”. Then after clicking OK three
times, the following message appears on the screen “GroupWise did
not initialize successfully, Please run GroupWise Setup, or contact your
system administrator. Unspecified error OLE Error 80004005*During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
**You need to disassociate these four NDS users from any GW attributes.
Right-click each user in C1, GroupWise Utilities->GW / eDirectory
Association->Disassociate GroupWise Attributes.
*** When I do as instructed I get the following error:
[username] is missing the following attribute: NGW: Post Office
~~~~~~~~~~~~~~~~~~~~~~~~
*GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
**If the post office is closed, you need to determine why this is. On the
MTA, hit F10, Configuration Status, highlight your PO and hit enter,
select details, then look at the last closure reason.
*** Last Closure Reason= Missing or incomplete address information
[ When I installed GroupWise, I wanted all the e-mail to be stored on the
EMAIL Volume. During the install, I Changed the Install Directory to
\Groupwiseemail. After the install I have two directories in this volume.
One called DOMAIN and the other called PCAM (PCAM is name of my domain).
~~~~~~~~~~~~~~~~~~~~~~~~
*On the Client, when I launch GroupWise, The Novell GroupWise Startup has
a message in the message window 'The version of GroupWise you are
using cannot access this post office'.
**What version of GroupWise is on the server and what version client are
you
using? Also, if you pull up the properties of both the domain and post
office in C1 what is the database version listed as?
*** I installed GroupWise 7 both Server and Client. I'm thinking this is
due to the Post Office being closed. I only have 1 Post Office.
Thank You;
Lewis -
Suppose you are using wifi. For example, I use my dads wifi, can he see what I am doing on my iPod when I use the Internet/wifi?
Yes it is possible if he has installed the appropriate monitoring software.
-
The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Criteria or check when we see the error "You are using an older version of firefox"
Criteria or check when we see the error "You are using an older version of firefox that is no longer supported and may be insecure" on sites like facebook. Currently firefox 8.0 does not give this error but 3.5.4 does. What is the check performed by sites for this error?
Most web sites use the User Agent, which is sent in the header of the request for delivering the page. The user agent of the browser you used to post here is <br />
Mozilla/5.0 (Windows NT 5.1; rv:18.0) Gecko/20100101 Firefox/18.0 -
HT201318 Reduce the amount of iCloud storage you are using by September 30, 2013 emails
I keep getting emails telling me to reduce the amount of storage you are using or purchase a storage plan, but when I click Manage my Storage Plan the plan I want isn't available. I've been trying to get help on this topic for a week.
What is your current plan and what plan are you trying to choose? Also, are you a former MobileMe user who's free upgrade is about to expire?
-
What keys are used to open windows besides CTL-Alt-Delete?
What keys are used to open windows besides Ctl-Alt-Delete?
Open what windows? what is a window? There is no Alt key.
Describe what you are trying to do.
Maybe you are looking for
-
Creative cloud education on the same computer with different account
hi, I bought a 1 year creative cloud (education version) which will expire in few months. Perhaps I will skip to a different version or maybe not, still don't know. My question is: I have plans to sell my computer to a friend (student) and he would
-
Errors while rebuilding InterMedia index
While executing "alter index ABC.SAMPLE_INTERMEDIA_INDEX rebuild online parameters( 'sync memory 45M' );", we encounter the following error: java.sql.SQLException: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: inter
-
Pivot not getting result in select statement
Here are the details oracle version 11g R2 on windows 7 OS CREATE TABLE OTBOOKINGDETAILS ( EMPNO VARCHAR2(10 BYTE), OTBOOKEDDATE DATE, WEEKDAY NUMBER(5,0), DAYCEILINGHRS VARCHAR2(10 BYTE)); Here is the data INSERT INTO OTBOOKINGDET
-
Hi All, I have requirement for devloping interface for outbound invoice that is IDOC to be passed on to the middleware(here it is Biztalk(EDI subsystem)). Port configuration is given, RFC is done, 1>Does I need to ask for partner profile bcoz in this
-
Editable region - all pages change?
Hi, I've made a template for some pages, but the customer has to change the image (in the header). I've made an editable region, but when I edit an image of a page (not the template), all images of pages which are made with that template are changing