What is Bootstrapping in LYNC ? how does it work?

could anyone explain..whats bootstrapping in LYNC? how does that work? what is it used for.??

bootstrapper.exe is called by setup.exe, bootsrapper.exe is responsible for deployment and configuration of server roles.
The bootsrapper receive the configuration from the configuration of the topology builder
regards Holger Technical Specialist UC

Similar Messages

What is UMA exactly? How does it work?

What is UMA exactly? How does it work?
I have T Mobile but am not subscribed to Hotspots at Home. I do pay for the BB unlimited internet package.
When I am connected to my router at home, it goes to UMA. But other times, it just says wifi and is still connected to my router -- but NO UMA. I haven't made any changes.
What is this?

Here is a KB that discusses UMA:
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB11735&slic...
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What is 'mobile account' and how does it work?

This is a hidden feature in Mac OS Leopard, that I believe require an Leopard Server on the network.
I have not found it in the regular user interface, but it can be revealed by following the below process:
1. Go to System Preferences > Accounts
2. Unlock
3. Search for mobile account, and press Enter
4. Wait for the Mobile account options to show up
What is this feature? How does it work?
I have found no references to it in the normal documentation.

Google is your friend:
"A mobile account is a Mac OS X Server user account that has been copied to a local computer and remains synchronized with the server account so that both locations contain a matching set of data."(Mac OS X Server User Management, p. 46).
And it has been around since 10.3, so it is not something new to Leopard.
see: http://www.afp548.com/articles/Panther/mcx2.html

What is iTunes Match and how does it work?

What is iTunes Match and how does it work? I have several tunes on my computer that do not show complete. The source of these tunes are from my own CDs.

iTunes match - http://www.apple.com/itunes/itunes-match/ - see FAQ at end too
Basically it looks at the music you have in iTunes. If it sees the equivalent on the iTunes Store site it does nothing, but it makes that copy accessible to you to download. If you have music it doesn't it will upload a version from your computer to the site that only you can access from anywhere online.
In your case if you have incomplete tracks it will not fix them. It does some kind of audio fingerprinting to make sure you aren't just feeding it a bunch of 60s demonstration cuts and trying to get whole tracks back.

What is an EDI ..how does it work

HI ,
How Electronic Data Transfer works.
We are planning to upgrade from 4.7 to ECC6 .Does it affects the EDI..how to go about the analysis.

EDI : Electronic Data interchange
is about doing business and carrying out transactions with your trading partners electronically. This is to reduce the paper work and send the data electronically. A very good detail is given on erpgenie: check this link out, you will get all what you need:
http://www.erpgenie.com/sapedi/index.htm

What is a codepage and how does it work?

Like any application, DI needs to know which "codepage" to use when processing data. Codepages are character encoding tables. Codepages are necessary because ultimately, all software operates with sequences of bytes, not the actual letters or numbers that you see on a computer screen. Operating systems and other software applications use codepages to map sequences of bytes to specific characters. Those characters can be single-byte characters such as English or French or multi-byte characters such as Korean or Chinese. Do not assume each language has it's own codepage. Codepages provide a mapping for a specific set of characters, and in the case of codepage MS1252, many languages such as English, French, German, and Swahili all use the same codepage. This is possible because they share many characters such as "a", "b", "c", etc... MS949, on the other hand, only maps to Korean. Some codepages, such as UTF-8, UTF-16 and UTF-32, map to a standard generally known as Unicode. This is very useful because Unicode is the character set which includes almost all known characters in the world today. When processing both multi-byte and single-byte data, a Unicode codepage is recommended, which in the case of DI is equivalent to UTF-8 .

How to identify which codepage is installed on our OS?
I have windows XP on my machine.

What is Card Manager and how does it work ?

Hi everyone,
I would like to know how can I find complete description about "card manager"?
If there is any document or link that have explained it ,please inform me.
yours sincerely,
Orchid

Since it is part of the GP API, the only way to handle the CVM PIN is through an Applet. So you need one "Global PIN" Applet, with which you can set/block/submit/verify a the CVM PIN. All other Applets will implement a verification of the CVM PINin the select() method:
     public boolean select () {
          CVM cvm = GPSystem.getCVM(GPSystem.CVM_GLOBAL_PIN);
          if(!cvm.isVerified())
               return false;
          else
               return true;
     }

What is data selection? how does it work in sap bi?

details about data selection process

Hi Nihar,
1. Data in SAP comes from different sources .
2. Sometime we have generalize data from which we need specific data based on our reporting requirement .
ex: If data is coming from standard extractor etc then it is generalized for various reports .If you have specific requirement then you don't need all the data to be loaded in DSO and Cubes .
3.Sometime there is huge amount of data so we select data as per our requirement ex :yearly ,Quarterly ,Fiscal period wise ,Company code wise etc .
4.We can filter out useful data at different level like :
At info package level ,at DTP level ,By routines in transformation ,By using filters at queries etc .
The whole purpose of selection is to load only useful data for reporting .It is part of process of cleansing of data before loading in a Warehouse .
Regards,
Jaya Tiwari

My iPhone was stolen and I have contacted the police who are using the meid number to locate. How does this work and what are my chances of getting the phone back?

My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is.

Firefox update installs, but does not apprearon screen, or task manger yet is running what is going on and how does one fix it?

I installed the update Mozilla Firefox 28. It was suppose to launch upon completion. it did not appear on the monitor screen, nor the task manager, but was running; for when I attempted to install the older version again it, it said that Firefox was running and needed to be turned off.
I restarted the computer and tried opening Firefox, with the same results.
After restarting again, I attempted to reinstall the update, with the same results taking place.
I attempted to uninstall Firefox and install the new version. The same results took place.
In the past, I could install Firefox 27 update, only now I can't for the same thing takes place. Past a certain version (19), this event takes place, but 19 and older can install it with no problems.
I checked Firefox troubleshooting information. All was normal. I checked my firewall. Again, all was normal. Tried Firefox reset. Did not help. Tried with my firewall disabled. Did not solve the problem.
Ran a virus check (deep) no viruses. Checked my computer system. No errors.
I can install updates for my other programs, even install new programs; just not Firefox.
What is going on and how does one fix it.

Hi Amseeking,
Thank you for your question. From your description, you tried to install the 28 update from a version 19 installation. Did you install a fresh install of 28 successfully? Where the name of the file is"Firefox Setup Stub 28.exe"? This is what is sound like happened. When going to about Firefox and searching for updates it installs over the current installation. However if Firefox was already running, there are more than one installation.
Updating from version 19 to 28 would not be a problem. However the user data from your previous version would have to be imported to the new installation if you have more than one install on that computer.
An easy way to tell is to search for Firefox in the Start menu to see if more than one icon shows up in the search results.
I hope this helps.

Menu Object; MANUAL option. What is this, and how does it work?

What is this... and, how does it work? Can't find documentation on this.

My knee-jerk reaction is, "are f'n kidding me?"... but, of course, you're not.
I must say, that is an incredibly useless option. How would that 'option" differ from simply making a text object (or text/rectangle/image combo or group) and creating a link?
What got me looking at this option was the hope to find some way to insert a dynamic "field" that could be used on a master page to display the current page title (of a page based on that master). Something similar to Word (and other applications) that you can enter information into a document property and then insert that information anywhere within the document by using a field code for that info. I don't know if there is an HTML code that could be used to accomplish this, in this case. Something that would refer to the page title.
Thanks for the info none-the-less.

What is "Assisted GPS" on the iPad and how does it work?

What is "Assisted GPS" on the iPad and how does it work?

I purchased the iPad mini Wi-Fi & Cell because it has GPS. OK, it is assisted GPS but the GPS works very well as stand alone. I got the iPad mini for use in flight, so I dont even have a sim card in it. The GPS works perfectly in flight under all conditions. I have cross checked it against typical approved aircraft installations and it is very accurate at all times. I use it in Wi-Fi mode on the ground when updating my aviation database, when planning a flight, or similar circumstances. The primary advantage of A-GPS is quick location reading when first turned on, when on the ground where the GPS satellites signal may be of reduced quality. At 10,000 feet plus, it is a stand alone GPS. I have frequently turned the iPad off in flight for periods of time and when powering up, it gave me accurate positioning in a few seconds, never exceeded 10 seconds. I have also tested my iPad on the ground, using the aviation maps, and the GPS works perfectly also.
It remains possible that there is some feature that enhances the GPS when on the ground, even if there is no sim card in the iPad. But I doubt that any of these would work in an aircraft at high altutide. Nonetheless, I would appreciate knowing more about this.

What is a content management system how does it work in coldfusion?

hi again
help?
what is a content management system how does it work in
coldfusion?
snippets?
examples in Coldfusion?
thanks

Googleing "content management" brings up 120 million hits.
Good place to start.

What is the "Data Transfer Process" in the BI7.0, and how does it work?

Hi, experts !
I'm fresh on BI7.0.
What is the "Data Transfer Process" in the BI7.0, and how does it work?
And what is it used for ?
Could anyone help me? Plz send me some doc.
[email protected]
Thank u !

HI,
Refer this blog
/people/community.user/blog/2007/06/22/sap-netweaver-70-bi-data-transfer-process-dtp-blog-series
Also refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Thanks

What does the bookmark bar do? How does it work?

What does the bookmark bar do? How does it work?

You can use the bookmarks bar in Safari to have links to some sites permanently shown at the top of the screen below the address field and icons - so you just have to tap the link on the bar to go to that site as opposed to tapping the bookmarks icon and finding the link in there. So it's just a slightly quicker way to go some of your more regularly used sites

What is Bootstrapping in LYNC ? how does it work?

Similar Messages

Maybe you are looking for