What is conversion exit in SAP BI
Hi to all,
Please can any body can tell me what is conversion exit in SAP BI.
Regards
Pavneet Rana
If you do a search in http://help.sap.com/erp2005_ehp_04/helpdata/EN/2a/fa0115493111d182b70000e829fbfe/frameset.htm
you will find lots of documentation:
Colin
Edited by: Colin Moloney on Jun 9, 2010 10:18 AM
If you do a search in http://help.sap.com/erp2005_ehp_04/helpdata/EN/2a/fa0115493111d182b70000e829fbfe/frameset.htm
you will find lots of documentation:
Colin
Similar Messages
-
Hi all,
I'm using the datasource 0co_om_wbs_7. I need the field REFBT in this datasource. However there is a conversion exit on this field (also named REFBT) and SAP doesn't document anywhere what this conversion exit does.
Does anybody have any idea?
Thanks in advance,
Guus
(point will be assigned for useful answers)Hi,
From following table entries , The Exit basically gets "PREQ" as input and convert it to 010 while storing in to database. While displaying in the report it reads 010 from the records and display "PREQ" in the report output .
You may refer to table TRFBT for further input .
SPRAS REFBT REFBT_EX TXT20
E 010 PReq Purchase Requisition
E 020 POrd Purchase Order
E 030 MatR Material Reservation
E 100 EFnd Earmarked Funds
E 110 FRes Funds Reservation
E 200 TPAg Tran. Price Agreemnt
Hope that helps.
Regards
Mr Kapadia -
Conversion exit for project definition
Hi
I have created a generic extractor to get some data of table PRPS. The project-definition number in this table is in field PSPHI. When you display the result of the extractor in the extractor checker (RSA3) the correct number (e.g. PG5707) is showing, however, when it comes into BW, it is showing the internal number (e.g. 000002). In BW I use this field to populate 0PROJECT, but due to the internal number being sent, I cant use it.
Can anyone please tell me what conversion exit I can call in my extractor to get the external number?
I also notice in SE16 for this table there is a selection in the user parameters to tick under the "Format" section in the data browser tab. If it is not selected, it shows the internal number, but if selected, the external number is displayed. I want to do this in my extractor.
Thanks
KarinHello Karin,
Have a look at these OSS
SAP Note 776990 Conversion exits with string parameters
SAP Note 756662 RSAR 196:InfoObj. contains val. which is not conversion exit
SAP Note 925589 P8:SDL:New DS:Possible problems w/
SAPI conversion exit call
SAP Note 843164 P27:SDL: Problems with conversion exits in the selection tab
SAP Note 557148 Executing conversion exits
SAP Note 497043 P6:SDL:Scheduler selections in fields with conversion exits
SAP Note 1034798 P13:SDL:New DataSource uses incorrect conversion exit
SAP Note 681931 Error due to conversion exits during the file upload
SAP Note 1003431 Error in target fields with conversion exits
SAP Note 374997 SDL: Conversion exits: ABPSN, ABPRJ, ABPSP and MATN1
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/] -
Hello Experts,
I have a basic question.
What is an Exit in SAP ? Does the word refer to its literal meaning here too?
If so, where do we exit from and what do we enter in ?
Please educate me and I promise pointsHi Raj,
SAP provides you a place to include your custom code to enhance/modify the standard functionality, it is called exit.
Regards,
Praveen -
What kind of mathematical optimization problems exits in SAP? (NP problems)
What kind of mathematical optimization problems exits in SAP?
I don't use SAP and don't have any experience with SAP but I would be interested what complex optimization problems, preferably "NP problems", exits or where a fast solution (semi-solution) to such problems would be beneficial.I think that no exists standard routines about NP problems in SAP.
OK. But this is not what I asked for.
What kind of mathematical optimization problems exits in SAP? (NP problems)
Hence, if you have such an algorithm, where can it be applied in SAP? Where is it useful?
I would especially be interested in problems where the space is so big that can not be completely tested. -
Conversion exit missing in BI - Best practice to install missing exits
Hi,
We are on BI 7.0 SP10.
While doing mappings, I found two conversion Exits MATN2 & SCOPE missing from the BI box. Hence SAP was throwing error while trying to activate the 7.0 datasource.
On more analysis, I found that the function groups are altogether missing.
What is the best practice to install these missing objects (Func Groups, Func Mods) in the system.
Our ABAP person suggested to create these objects as "Repair objects" in the system. Is that the right procedure?
Please advise.
Thanks
VishnoI have been through the following steps:
Entered this URL http://help.sap.com/bp/initial/index.htm
Clicked on 'Cross-industry Packages'
Clicked on 'CRM'
Clicked on 'Englilsh'
Then the following page is displayed:
http://help.sap.com/bp_crm70/CRM_DE/HTML/index.htm displayed
But now what?. How do I get the Best practice instructions for a CRM implemenation?.
Jason -
What are user exits & enhancements & how to use those .
What are user exits & enhancements & how to use those .
Hi,
BADI , Customer Exit / User Exit , Enhancement all are same.
Customer Exit & User Exit terms were earlier used in case of R/3. Now in ECC 6.0 they are known as
BADI means Business Add-Ins.
BADIs :
Use:
SAP provides multiple implementations of Business Add-Ins (BAdIs), which enhance the functions of the Configuration Control component.
In addition, there are multiple empty BAdIs available for implementing a customer-specific logic for special functions.
Pls. find listed below some important PP Enhancements / BADIs :
Exit name Short text
PPAPO002 Publication of APO Data in Transfer from APO to R/3
PPAPO003 Production Order R/3->APO: Check if Operation is APO-Re
PPAPO004 Planned Order Conversion from APO: New BOM Explosion?
PPAPO005 Enh. of Relationships in Proc. Order during Transfer to
PPAPO006 Influencing Initial Supply of Manufacturing Orders
PPAPO007 Overriding Checkbox Fields for Production Order APO ->
PPAPO008 Override Order Type for Planned Order Conversion
PPAPO009 Customer Exit for Addition of Components and Items
PPAPO010 Filtering Components out of Quantity Propagation
PPAPO011 Performance-Related Adjustment of Remaining Duration
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order hea
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measu
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determin
PPCO0014 Select process orders for external relationships
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document link
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0020 Process order: Display/change order header data
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
PPCP0001 P.Cost Planning: Additional Cost Elements for Person
PPEACT01 Customer Fields at Mode D
PPECMP01 Customer Fields for CMP Node
PPECMP02 Customer Fields: CMP Variants
PPEGEN01 General Engineering Node: Customer Fields
PPEMPA01 MPA Customer Enhancement
PPEMPO01 Customer Enhancement for Material Planning Object
PPEMPO02 Customer Enhancement for Model
PPERES01 Customer Fields at RES Node
Alternately you can find User Exits / BADIs in TCode : SMOD ( SAP Enhancements)
Hope this helps.
Regards,
Tejas -
What is the difference between SAP NW PI7.1 and PI7.1 EHP1
We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
SnehaHi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit -
Hi,
I am new to SAP BW ,while creating a Datasource i am experiencing this error as "No Conversion exit entered" .Please help me on this .
Thanks & Regards
Sameer KhanHi Vibhuti,
How you created customer name and address, I mean to say data element? You can not have data with space except for short, medium and long text.
Check if you are excluding first row as header in info package, if you have header in Flat file. Check if Lower case is ticked in Customer name and customer address.
Regards,
Kams -
How to find out the customer exit and sap exit variables created provider?
Hi all,
How to identify what are all the customer exit and sap exit variables are been created for an info provider. is there any tables which allow us to find out.
thanxs
harithaHello haritha,
SAP Exit and Customer Exit variables are created for Characteristics and not for individual InfoProviders.
So whenever the characteristic is used in the InfoProvider, by selection the appropriate variable the exit can be called.
So the same Exit can be in one or more InfoProviders.
Hope it helps.
Thanks,
Chandran -
Conversion exits before value mapping in AIF
Hi All
I'm trying to use conversion exits before mapping in define value mapping, where I want to truncate leading zeroes in the source field before the value mapping is executed.
I'm using the conversion exit 'ALPHA' (internal->external) to achieve this, but the leading zeroes do not get truncated. Below is an example-
Conversion Exit: ALPHA
Data Element for conversion:
Direction: Internal->External
Source Value: 0000012345
Expected Value after conversion: 12345
Actual Value after conversion: 0000012345
A similar issue Error in reading a value from database table is noted here, however note 1892571 that is suggested does not seem to resolve the issue I'm facing.
Am I missing something here?
Regards
ChandraHi Glenn Bumanlag,
I think the values that you have given for source values (Agency and scheme)
and Target values (Agency and scheme) may be mismatching so kindly chek that...even i got the same error in the past..........
If you the this problem kindly change it accordingly and also refresh the cache once you that with this.........
Kindly follow the below mentioned link and check if you have followed these steps.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5
Thanks
Sai
PS: kindly reward points if helpful -
Short Dump DYNPRO_MSG_IN_HELP in Conversion Exit
Hi Gurus,
I've written the following conversion exit:
FUNCTION CONVERSION_EXIT_ZBZEI_INPUT.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(INPUT)
*" EXPORTING
*" VALUE(OUTPUT)
*" EXCEPTIONS
*" INPUT_NOT_VALID
DATA : CPI_OUT(4) type n, CPI_IN(5), cpi_in2(5), cpi_in3(5).
DATA : CPI_YEAR(4), CPI_PERIOD(3).
DATA : CPI_NUM2(2) TYPE N.
DATA : CPI_NUM3(2) TYPE N,
index(2) type n,
index2(2) type n,
merker(1).
DATA : CPI_C8, CPI_C7, CPI_C6, CPI_C5.
DATA: SONDERZ. "nimmt das Trennungszeichen auf
*-initializations-----------------------------------------------------*
check not input is initial.
CPI_IN2 = INPUT.
CLEAR : cpi_in, cpi_in3, cpi_out, OUTPUT, index, index2, merker,
cpi_num2, cpi_num3.
do.
if cpi_in2+index(1) co '0123456789' and merker ne 'X'.
cpi_in+index2(1) = cpi_in2+index(1).
add 1 to index2.
endif.
if cpi_in2+index(1) = ':'.
merker = 'X'.
clear index2.
endif.
if cpi_in2+index(1) co '0123456789' and merker = 'X'.
cpi_in3+index2(1) = cpi_in2+index(1).
add 1 to index2.
endif.
add 1 to index.
if index = 5.
exit.
endif.
enddo.
if cpi_in3 is initial.
cpi_out = cpi_in.
else.
cpi_num2 = cpi_in.
cpi_num3 = cpi_in3.
cpi_out(2) = cpi_num2.
cpi_out+2(2) = cpi_num3.
endif.
if cpi_out(2) > 23.
message e000 raising input_not_valid.
endif.
if cpi_out+2(2) > 59.
message e001 raising input_not_valid.
endif.
output = cpi_out.
* output+2(2) = cpi_in+3(2).
endfunction.
The problem is when the user inputs an invalid value and presses directly after this F4 the conversion exit will call and I get the short dump DYNPRO_MSG_IN_HELP when I trigger the error message.
Is there any way to know that the program is in value-request? Maybe a system field? Can I catch this error?
Thanks for help.
LarsHello Lars,
refering to OSS 84510 SAP does not allow error messages in this environment. However, to find out if you are in a F4- context you can use the kernel function 'DY_GET_DYNPRO_EVENT'
data: event(3).
"check if we are in F4 environment
call 'DY_GET_DYNPRO_EVENT' id 'EVENT' field event.
if sy-subrc <> 0 or ( event <> 'PAI'
and event <> 'INP' )."PAI also POV
" not F4 help
message e000 raising input_not_valid.
else.
"F4 help -> only S message
message s000 display like 'E' raising input_not_valid.
endif.
Kind regards, miro -
What are Conversions and Extensions
Hey ,
I want to know what are Conversions and Extensions. Can i get any material where i can get information on these.
Thanks in advanceThe conversion programs were used to take the extract data from the legacy system and re-format for SAP and load the data into SAP.
Conversions are one-time programs used to transfer data from the legacy system into SAP. For example, you can transfer master data like vendors, customers etc.
SAP provides enhancement to BAPIs thru EXTENSION IN AND EXTENSION OUT .these are structure parameters.suppose example: one BAPI released to update the mara table.then u modified the table mara thru append structure.this changes will not be reflected in BAPIs.So thats why in that case we have to use EXTENSION IN AND EXTENSION OUT structures to fill and work. -
What is unicode check in sap?
what is unicode check in sap?
Hi
http://help.sap.com/saphelp_nw2004s/helpdata/en/79/c55458b3dc11d5993800508b6b8b11/content.htm
Check for the following errors
object must be a character type data object
In Unicode, the addition IN BYTE/CHARACTER MODE must be specified
The access and storage modes ACCESS and MODE must be specified
var1 and var2 are not mutually convertible. In Unicode programs must have the same type/structure
TRANSLATE CODE PAGE/NUMBER FORMAT not allowed
The data type/structure objetcs in 'ADD' statement should have same type
The data type/structure "&1" and "&2" are should have same type
IN TEXT MODE the addition ENCODING must be specified
Structures "&1" and "&2" are not mutually convertible.
The ENCODING addition is not valid in BINARY mode
The IGNORING CONVERSION ERRORS addition is not valid in BINARY mode
The REPLACEMENT CHARACTER addition is not valid in BINARY mode
Check for the Customer code pages and use the tcodes SCOV and SPUMG .
Please Go through these Documents,
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a -
What is user exit in MM?
is there any difference between user exit and enhancement? does a end user raise a ticket for user exit? please help
Edited by: sherlyn chopra on Oct 1, 2008 4:36 PMWhat is and how user exits can be used?
What is the transaction code to see all available user exits?
Method of using this?
User exit jus nothing but just a code ....which is not provided the standard sap system..but function could be added later into the code ..this is done by abap people...
User exit is a place where we can write our own logic inside SAP programs. Instead of modification of SAP code, we can place our custom logic in User Exit.
There are three types of User exits:
1. Function Exits
2. Menu Exits
3. User Exits
Finding User Exits:
1. Take VA03 as example. Go to System status; select the program (double click); Find by the key word u2018Call Customer-functionu2019; Double click on the u2018Call Functionu2019 to go to the code; Double click on the customer function no.
It will take to the function exit in which SAP provides a Include program, where we can write down our own logic.
2. Run transaction SE84 and click on u2018Enhancementu2019 on left screen. Then click on u2018Customer Exitsu2019. Then double click on u2018Enhancementsu2019.
3. In transaction CMOD, type the name of your project and press the CREATE pushbutton; Once you SAVE your project, you can add as many enhancements as you want by pressing the SAP enhancements pushbutton; Add the enhancements
you want to add to the Project.
4. There are some exit provided by SAP in the program as subroutines. For example, go to transaction VA02; Double click on the program. It will take to the program; Some includes are provided by SAP as user exit. Double click on the include name, then it will take inside the include. Double click on MV45AFZZ (Program)include; Here we have different forms which acts as user exits. In these forms we can include our custom logic
5. Open the program through SE80 transaction; Click on the u2018Screenu2019 and all the available screens will be displayed. Then search if any Exit screen is available. Normally short text of the screen gives an idea whether Exit screen or not.
6. Finding BADIs : Double click on the u2018Programu2019; Search by string u2018cl_exithandler=>get_instanceu2019
;Search result is displayed. Double click on any one in the list.
http://www.sap-basis-abap.com/abap/difference-between-user-exits-screen-exits-field-exits.htm
http://www.sap-basis-abap.com/pm/user-exits-in-sap-pm.htm
http://www.sap-basis-abap.com/sapab013.htm
for eg:
BAPI_INCOMINGINVOICE_CANCEL Invoice Verification: reverse invoice
BAPI_INCOMINGINVOICE_CREATE Invoice Verification: Post Invoice
BAPI_INCOMINGINVOICE_GETDETAIL Invoice Verification: display invoice
BAPI_INCOMINGINVOICE_GETLIST Invoice Verification: List Invoices
BAPI_INCOMINGINVOICE_PARK Invoice Verification: Park Invoice
BAPI_INCOMINGINVOICE_RELEASE Invoice Verification: release invoice
BAPI_INCOMINGINVOICE_SAVE Invoice Verification: Flag Invoice for Background Processing
Thanks & Regards,
Kiran
Maybe you are looking for
-
Need help with Logic Error(I think?)
Hello. The following is a program I am creating to calculate the start value of a gymnastics routine, the basics are as follows(And not everything is implemented yet): In gymnastics there are the aparatuses, then skill group codes, then "skills" a-g
-
HP LaserJet 400 colorMFP - Touch Screen going wrong / need to reboot manually
Hi, the touch screen on the printer does not work well. If I press a particular button on the screen it triggers another function. As a result I cannot copy or manage anything from the touch screen. Any solution? I have tried to reboot the printer b
-
How can i find my email contacts
Have just got my new macbook air and am trying to find my contacts in my email. Would appreciate any help thank you all
-
OK, so this is an odd problem, and i've exhausted all other options, so can anyone shed some light on this? I bought an N80 for my wife which is working well except for the in-built browser, it connects to the internet fine via wifi, but always times
-
Major dropout of BT on Saturday 28 June
There was a quite long period on Saturday when Broadband only worked in certain areas . This problem was apparently known about by BT , certainly according to a Broadband Speedchecker site that I use . It was only after using the check site that I st