What is difference between interactive list and interactive reports?

what is difference between interactive list and interactive reports?

hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat

Similar Messages

  • What is difference between SharePoint List and Libraries

    What is difference between SharePoint List and Libraries

    Hello,
    You also might want to loot at here:
    http://veroniquepalmer.com/2013/02/24/the-difference-between-sharepoint-2010-lists-libraries-and-pages/
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/1d4152cd-92a6-4eed-9a52-a519ec71c674/what-is-the-difference-between-document-library-and-list-in-sharepoint
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

    there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
    https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

  • What is difference between bex analyser and bex browser

    what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

    hi
    Bex Browser
    The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
    Document types that you can work with in the BEx Browser are:
    · BW workbooks
    · Documents that are stored in the Business Document Service (BDS)
    · Links (references to file system, shortcuts)
    · Links to internet sites (URLs)
    · SAP transaction calls.
    · Web applications and Web templates
    · Crystal Reports
    Bex Analyser
    The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
    Features
    You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
    Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
    You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
    Overview of the Functional Area of the BEx Analyzer:
    ·        BEx toolbar
    You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
    ·        Evaluating Query Data
    The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
    Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
    ·        Queries in Workbooks
    Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
    When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
    You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
    ·        Precalculating workbooks
    You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
    Activities
    To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
    You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
    Hope this will solve your issu
    nagarjuna

  • What is difference between SAP R3 And SAP IS Mills Product

    HI Friends
    What is difference between SAP R3 And SAP IS Mills Product
    What are the futures are availables in IS MIlls
    Regards

    Hi,
    SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
    Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
    The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
    These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
    To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle – from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
    Prase

  • What is difference between local variable and property node ?

    What is difference between local variable and property node ?
    " 一天到晚游泳的鱼"
    [email protected]
    我的个人网站:LabVIEW——北方客栈 http://www.labview365.com
    欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview

    To make things clear, here are two small examples that show how nasty locals and value properties can be to the naive programmer.
    - Open the diagram of the race condition.vi before running it and try to predict what will be the values of the two counters after the third run.
    - Use the Compare Locals Properties and Wires.vi to find out how slow locals and value properties can be (times 1000+).
    This being demonstrated, I must add that I use globals and value properties quite often, because they are often very convenient
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Race condition.vi ‏9 KB
    Compare Locals Properties and Wires.vi ‏18 KB

  • Differences between ABAP lists and ALV lists

    what is the differences between ABAP lists and ALV lists?
    Edited by: pong pong on Apr 9, 2008 5:08 AM

    Hello Pong Pong,
    Please go thru help topics:
    ALV Grid
    http://help.sap.com/saphelp_47x200/helpdata/en/bf/3bd1369f2d280ee10000009b38f889/frameset.htm
    ABAP Lists
    http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb408a455611d189710000e8322d00/frameset.htm
    Regards,
    Siddhesh

  • Difference between source list and info records

    Dear All,
    What is the difference between Source List and Info Records?
    Thanks N Regards
    Anandasiva

    Hi,
    The source list is the list which shows the sources from which you can procure the material. If you have ticked the source list requirement in the material master, then you can procure the material only from the vendors mentioned in the source list.
    In Inf Record, you maintain the data for a material supplied by a vendor. e.g. Material price, tax code, other conditions,, buyer code, delivery & payment terms.
    Hope your requirement is fulfilled.
    Reward points if the answer is helpful.
    Regards,
    Prashant Kolhatkar

  • Difference between material listing and item proposal?

    HI Gurus,
    COuld you explain what is the difference between material listing and item proposal?
    --james

    Hi James,
    Item Proposal is automatically proposed by the system while creating a sales order for a specific customer.
    This setting is maintained in the Sales Area of customer master under Sales tab.
    It can be stored as master records. When you create a sales order, you can refer to an item proposal, look over the proposed items, and copy all or just selected items into the order. If a customer routinely orders the same goods, you can create a proposal and enter it in the customer master record. During sales order processing, the system automatically proposes items from this proposal.
    Item Proposal is created using VA51.
    Material Listing lists which materials a customer can buy. With material listing or exclusion you can control which materials can be sold to each customer.
    A material listing is created for a customer. The customer can only buy the materials contained in the list. The system does not allow any materials to be entered if they are not contained in the material listing.
    If no records exist for material listing, the sold-to party, for example, can in principle buy the same materials as the payer. However, if there is a material listing record specific to the sold-to party, the sold-to party can only buy the materials permitted in the list. These materials do not have to be identical to those which the payer can buy.
    Material listing and material exclusion are controlled using the condition technique.
    Hope it helps.
    Regards,
    Priyanka

  • What is difference between sy-tabix and sy-index.

    SAP Seniors,
    Can you please let me know what is difference between sy-index and sy-tabix.
    I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
    Thank you
    Anitha.

    HI,
        Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
    SY-TABIX
    Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
    APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
    COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
    LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
    READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
    SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
    SY-INDEX
    In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
    Hope this helps.
    Thank you,
    Pavan.

  • What is difference between sy-index and sy-tabix and where both are using ?

    what is difference between sy-index and sy-tabix and where both are using ?

    hi nagaraju
    sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
    sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
    SY-INDEX is a counter for following loops: do...enddo, while..endwhile
    SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
    Here is an example from which you can understand the difference between sy-tabix and sy-index.
    Itab is an internal table with the following data in it.
    id Name
    198 XYZ
    475 ABC
    545 PQR.
    loop at itab where id > 300.
    write :/ itab-id, itab-name , sy-tabix, sy-index.
    endloop.
    My output will be :
    475 ABC 2 1
    545 PQR 3 2
    Sy-tabix is the index of the record in internal table.
    sy-index gives the no of times of loop passes.
    So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
    Regards,
    navjot
    award points

  • Re: what is difference between sap locking and database locking

    hi,
        what is difference between sap locking and database locking. Iam locked the table mara by using lock objects.
    But iam unable to unlock the mara table. I give u the coding. Please check it.
    REPORT zlock .
    CALL FUNCTION 'ENQUEUE_EZTEST3'
    EXPORTING
       MODE_MARA            = 'S'
       MANDT                = SY-MANDT
       MATNR                = 'SOU-1'.
    call transaction 'MM02'.
    CALL FUNCTION 'DEQUEUE_EZTEST3'
         EXPORTING
              mode_mara = 'E'
              mandt     = sy-mandt
              matnr     = 'SOU-1'.
    IF sy-subrc = 0.
      WRITE: 'IT IS unlocked'.
    ENDIF.

    Hi Paluri
    Here is the difference between SAP locks and Database locks, i will try to find the solution to your code.
    Regards
    Ashish
    Database Locks: The database system automatically sets database locks when it receives change statements (INSERT, UPDATE, MODIFY, DELETE) from a program. Database locks are physical locks on the database entries affected by these statements. You can only set a lock for an existing database entry, since the lock mechanism uses a lock flag in the entry. These flags are automatically deleted in each database commit. This means that database locks can never be set for longer than a single database LUW; in other words, a single dialog step in an R/3 application program.
    Physical locks in the database system are therefore insufficient for the requirements of an R/3 transaction. Locks in the R/3 System must remain set for the duration of a whole SAP LUW, that is, over several dialog steps. They must also be capable of being handled by different work processes and even different application servers. Consequently, each lock must apply on all servers in that R/3 System.
    SAP Locks:
    To complement the SAP LUW concept, in which bundled database changes are made in a single database LUW, the R/3 System also contains a lock mechanism, fully independent of database locks, that allows you to set a lock that spans several dialog steps. These locks are known as SAP locks.
    The SAP lock concept is based on lock objects. Lock objects allow you to set an SAP lock for an entire application object. An application object consists of one or more entries in a database table, or entries from more than one database table that are linked using foreign key relationships.
    Before you can set an SAP lock in an ABAP program, you must first create a lock object in the ABAP Dictionary.

  • What is difference between ESB Service and ESB Service Group

    Guys please tell me What is difference between ESB System and ESB Service Group and when we use them, i mean in what condition.
    Many Thanks
    Deepak

    The use of these is explained in the ESB developers guide along with some examples in what case to use them. See: http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28211/esb_jdev.htm#sthref167

  • What is difference between User Exits and BAPI

    hello sap gurus
    what is difference between User Exits and BAPIs

    http://www.sap-img.com/abap/what-is-user-exits.htm
    www.****************
    Where as this customer exits are again divided into:
    1. Menu Exits.
    2. Field Exits.
    3. Screen Exits.
    4. Function module exits.
    These all the things comes under Enhancements.
    User exits
    1.A user exit is a three character code that instructs the system to access a program during system processing.SXX: S is for standard exits that are delivered by SAP.
    XX represents the 2-digit exit number.UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
    2.USER EXITS are FORMS and are called by SAP standard programs
    using PERFORM.
    3.Inside the form (user exit) you can read and change almost
    any global data from host program.
    4. User exits are more flexible because you have more information to use in your code but on the other hand , it is very easy to manipulate erroneously global data and lead the standard program to a dump or even to make database inconsistent.
    5.While changing User-exit,Access Key is required,
    BAPI is nothing function module but which is remote enabled, means you can access this fm through other SAP or non-SAP system by assingning to business object,which we can crea in SWO1 transaction.
    more details see WWW.****************
    reward if helpful

  • What is difference between bus.Area and plant

    dear experts, 
                what is difference between bus.Area and plant?
    thanks
    Rajakarthik.

    Hi
    Plant and Business Area are not the same.
    Business Areas are configured in FI module as per the Product lines or geographical operations basis.
    Where as The plants created in the logistics (General) module are assigned to the company code. That means all transactions taking place in the plants are posted to the attached company code in SAP FI.
    You can post a business area to several company codes and use it for cross-company-code reporting.
    The R/3 System uses a combination of plant and division to assign the relevant business area. When you use the R/3 System to automatically draw up accounts for business areas, you can assign only one business area to a combination of plant and division. Plants and divisions can be assigned and combined in several different ways.
    http://help.sap.com/saphelp_46c/helpdata/en/5d/a77d80ec1111d2bc1000105a5e5b3c/content.htm
    Re: Business Area and Plant
    Regards

Maybe you are looking for

  • ITEM IS NOT RELEVANT FOR BILLING WHILE DOING STO (VF01)

    HI I am getting an error while doing STO in CIN Item is not relevant for billing while doing VF01 STO proforma invoice JEX with delivery document type NL and item category NLN I searched the forum but not able to get an appropriate solution for this.

  • After 10.4.4 Update Flash Failes To Load In All Browsers!

    Has anybody experienced this problem?, Safari failed to load pluggin. even in IE, firefox and Opera no flash loads. Is there a fix for this? I have also downloaed the plugins and have re installed them varius times, and still no go. Its getting reall

  • Removing archived log files

    Hello all, Using Oracle 10g R2 ( 10.2.4.0) under UNIX Sun Solaris 10 , I have two rman backup types 1-L0 backup 2-L1 Backup ( Incremental cummulative) Facts: -Due to space pressure on archived log destination I'm trying to get less archived files pos

  • Initiate fails in BPEL Console for BPEL process connecting to JMS Adapter

    We have a BPEL process picking up data from JMS Queue of TIBCO EMS server. When we try to run this process from BPEL Console Initiate tab, we get following error dump : Oracle BPEL Process Manager Full Cycle An unexpected error has occurred while exe

  • Click on chart values to get details

    Hi, We have a requirement where we need to click on chart series and get details for same, e.g if there are different employee groups showing totals in a graph, we need to be able to click on the total in chart and get detail for same. Regards