What is difference between User Exits and BAPI
hello sap gurus
what is difference between User Exits and BAPIs
http://www.sap-img.com/abap/what-is-user-exits.htm
www.****************
Where as this customer exits are again divided into:
1. Menu Exits.
2. Field Exits.
3. Screen Exits.
4. Function module exits.
These all the things comes under Enhancements.
User exits
1.A user exit is a three character code that instructs the system to access a program during system processing.SXX: S is for standard exits that are delivered by SAP.
XX represents the 2-digit exit number.UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
2.USER EXITS are FORMS and are called by SAP standard programs
using PERFORM.
3.Inside the form (user exit) you can read and change almost
any global data from host program.
4. User exits are more flexible because you have more information to use in your code but on the other hand , it is very easy to manipulate erroneously global data and lead the standard program to a dump or even to make database inconsistent.
5.While changing User-exit,Access Key is required,
BAPI is nothing function module but which is remote enabled, means you can access this fm through other SAP or non-SAP system by assingning to business object,which we can crea in SWO1 transaction.
more details see WWW.****************
reward if helpful
Similar Messages
-
Re: Difference between user-exits and enhancements
Hi ,
Can any one explain the difference between user-exits and enhancements with an exmpale.
I will give u full points.
thanks®ards,
Bhushan-karra.Hi,
User exit - A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks. *-- Mani
The following document is about exits in SAP :-
The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications.
SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
Types of Exits
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
Check these links for more details -
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1978b543b111d1896f0000e8322d00/frameset.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://sap.niraj.tripod.com/id21.html
If this answers your question, please close the thread.
Check this link also,
https://forums.sdn.sap.com/click.jspa?searchID=5924777&messageID=3801056
Thanks,
Reward If Helpful. -
What is difference between user group and reference user group?
hi
guys,
what is difference between user group and reference user group?
your regards
p.sureshHi ,
Chk the link below for your clarifiacation.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
Hope it helps.
Regards,
Amit
Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM -
What is the difference between User exit and BADI
in user exit support to 4 types of exits(Menu exit,Screen exit,Field exit,Function module exit)in similar way is badi supported to all type
hi,
BADIs (Business Add-Ins) are the new way in which SAP allows you to enter additional logic into an application, and is based on OO ABAP. (Methods in Interfaces) Transactions SE18/SE19.
Customer Exits are the older method (which is still supported), whereby you create an include that is in a function module, which is called when the customer exit is activated. Transactions CMOD/SMOD.
In terms of terminology, people often use the terms "Customer Exit" and "User Exit" interchangeably, however, strictly speaking, User Exits are places provided in subroutines (notably in the SD module) where you can insert your own code, but require a modification to an include (although it is provided for customers to change).
They are two different methods to do the same thing: to check and update the data into std trx.
The user-exit is the old concept based on function module
The BADI is the new concept based on OO ABAP.
So you can often to find a BADI and an USER-EXIT to do the same thing and you have to decide what you prefer to use.
Anyway the new trx and the enjoy trx use BADIs as exit
User-exits are SAP's oldest way of updating data in standard programs - see MV45AFZZ - Form Userexit_Save_Document_Prepare.
Here you simply add ABAP code or add INCLUDES, etc
Customer-exits were SAP's next generation. They are built on the concept of function modules - where you add your custom within the Z func modules.
BADIs are SAP's newest and current way of updating data uisng Object-oriented concepts.
Please check this link.
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Check the below links:
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/badi-vs-user-exit-405324
http://www.sapfans.com/forums/viewtopic.php?t=172792
User-Exit is a specific place in a transaction-process where SAP offers
third parties to include there own business functionality. Actually
User-Exit is the namespace used for Exits programmed by SAP specifically
for SD. For the other modules it's called Customer-Exit.=20
>Business Add-Ins (BADI) =20
The use of object orientated code within SAP has lead to new method of
enhancing standard SAP code called Business Add-Ins or BADI's for short.
Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement
a BADI.
Difference between BADI's & User-Exit.
1. Check the replies for your question which asked by another person.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/569786
2. Similar thread.
http://www.sapfans.com/forums/viewtopic.php?p=559472&sid=99caa729618b18a8f7c46cc2f047af52
3. Same question explained
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Badi Tutorials
1. Sample program.
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
2. Implementing BADI.
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
Hope it helps.
3. From help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/5f/071eed117c11d5b37d0050dadef62b/frameset.htm
Pls : award points if it is useful -
Difference between customer exit and user exit?
hi experts
difference between customer exit and user exit?These r the main differences between user exits and customer exits
1) user exits r subroutines where as customer exits r function modules
2) user exits r not upgraded where as customer exits r will upgrade
3) customer exits r used for creating and additional fields or menu items to stadard tcode where as user exits r used for enabling or disabling the fields on the standrd screen or concatenating the key fields,it is not used adding an additional componenats to stadard tcode
4) customer exits r reusable where as user exits r not reusable.
Also:
1. Customer exits: Implemented as Function Modules within z includes. Anybody can change it and no access key is required.
2. User Exit: Implemented as subroutines within includes (any include except y or z includes). You need access for the specific include and then you can any subroutine (user exit) within that Include.
BADIs are the enhanced version of user exits where the same logic is implemented via classes and object (OOP)
Enchancement point is the latest once introduces with ECC6.0 . Not very sure about that but you can change it without any access key.
Please go through the following link which will help you understand the exits in a much better way:
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://sap.niraj.tripod.com/id21.html
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.sap-img.com/ab038.htm
User Exits.
http://www.erpgenie.com/sap/abap/code/abap26.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
customer exits
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Menu Exit.
http://www.sappoint.com/abap/spmp.pdf
http://www.sappoint.com/abap/userexit.pdf
http://www.sapdevelopment.co.uk/enhance/mod_sapmenu.htm
http://www.sapdevelopment.co.uk/enhance/enhancehome.htm
1. Previously there were only user-exits.
2. Then came the concept of customer-exits.
3. user exits were nothing but subroutines
FORM/PERFORM
called from standard programs.
4. The FORM defintion was placed inside
an empty include file.
5. So It was called EVERYTIME.
and we need to MODIFY/REPAIR the
standard include .
6. Then it came with concept of customer-exit
7. It consists of calling a FUNCTION MODULE,
which is called only if
the user-exit is ACTIVATED (other wise not called)
In this case, the code in put inside
a pre-defined Z include.
8. Functionality of both is same, howerver
we can note the following important differences
a) Customer exit is called only if activated.
(hence, it does not waste resources)
b) in customer exit, REPAIR does not happen
to the standard include.
Exits are basically the hooks whcih SAP has provided to add your own code.
User Exits: These are provided only SD module .
They are Empty subroutines with naming like USEREXIT_.
We need to have Access key to implement them.
Customer Exits: These are enhancement techniques.
There are defined in SMOD and implemented in CMOD.
Types of Customer exits: Function exit, Screen Exit, Menu exit.
User Exit and Customer Exit are same ,but SAP Exit and Customer exit are different...
Customer Exit,
Enables you to determine values for variables by means of Functional Module exit.The function module used is EXIT_SAPLRRSO_001.
Create a project in CMOD by selecting the SAP Enhancement RSR00001 and assign this to the enhanced proj and activate it.
Customer Exit
SAP creates customer exits for specific programs, screens, and menus within standard applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
If you want to enhance the functionality of your SAP System, you should take advantage of the exits available in standard applications. There are two main reasons why you should use exits rather than modifying SAP software yourself. Add-ons attached to exits have the advantage that:
They do not affect standard SAP source code
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System. You can only use customer exits if they already exist in the SAP System. You find find more information about locating applications with pre-defined exits in Locating Applications that have Exits
http://help.sap.com/saphelp_nw04/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/frameset.htm
SAP EXIT:this processing type contained in variables that are delivered with SAP BW business content.
http://help.sap.com/saphelp_nw04/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/frameset.htm
User Exits: allow you to add additional functions to the SAP standard.
Programs with user exits contain subroutine calls at certain points in their syntax that are identified by the prefix USEREXIT. The actual user exits are located in an include that has been assigned to a module pool. This is where customers can include any changes (enhancements) that they want to make to the system. These includes are always processed during program flow.
Advantage: In principle, customers can modify anything they want that is found in the include (tables, structures, and so forth).
Disadvantage: SAP cannot check the individual enhancements themselves which often leads to errors
reward points if found useful
regards
palak -
Whats the exact differnrce between User-Exit and BADI ?
Hi All,
Can any one tell me whats the exact difference between User-Exit and BADI ?
Even in User Exit also we write our code and the same in BADI also. Can any one plse elaborate wats the exact difference between these ...
Thanks & Regards,
Anil Kumar.BADI is the Object oriented concept of USER-EXIT
chk this
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Message was edited by:
Chandrasekhar Jagarlamudi -
What is the difference between customer exits and user exits?
hello friends,
what is the difference between customer exits and user exits?Hi
User exit - A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks. *-- Mani
The following document is about exits in SAP :-
The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications.
SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
Types of Exits
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
CASE okcode.
WHEN 'BACK OR EXIT'.
CASE sy-dynnr.
WHEN '100'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN '200'.
SET SCREEN 100.
LEAVE SCREEN.
ENDCASE.
ENDCASE. -
Difference between user exit,enhancement and BAdi
hello guys,
what is the difference between user exit,enhancement and BAdi.
Please do let me know..
Thanks in advance.
regards,
praveen.Pls do search the forum before posting*
-
Difference between customer exits and user exits
difference between customer exits and user exits
Hi,
USER EXITS->
1. Introduction:
User exits (Function module exits) are exits developed by SAP.
The exit is implementerd as a call to a functionmodule.
The code for the function module is writeen by the developer.
You are not writing the code directly in the function module,
but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
CUSTOMER EXITS-> t-code CMOD.
As of Release 4.6A SAP provides a new enhancement technique, the Business Add-Ins.
Among others, this enhancement technique has the advantage of
being based on a multi-level system landscape (SAP, country versions, IS solutions, partner,
customer, and so on)
instead of a two-level landscape (SAP, customer) as with the customer exits.
You can create definitions and implementations of business add-ins at any level of the system landscape.
To unify enhancements of the SAP Standard you can migrate customer exits to business add-ins.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
In order to find out the user exits for any tcode,
1. get the developement class of the tcode from SE93.
2. Now goto transaction SMOD and press F4,
3. give in the Deve class in the dev class and Press ENTER
this will show u the exits for any tcode.
or execute this report
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Regards
Kiran Sure -
DIfference Between User Exits, Screen Exits, Menu Exits And BADI
Could any one let me know the exact/practical dIfference Between User Exits, Screen Exits, Menu Exits And BADI. ? And why BADIs are more proned to use?
Hi,
User Exits:
A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Menu Exits:
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits:
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
BADIs:
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
And why BADIs are more proned to use?
In contrast to above customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
Regards,
Ferry Lianto -
What is difference between report programming and dialog programming?
hi,
what is difference between report programming and dialog programming? plz provide some example code
byeABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/ -
What is difference between interactive list and interactive reports?
what is difference between interactive list and interactive reports?
hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat -
What is difference between Shared ,Exclusive and Exclusive but not commulat
what is difference between Shared ,Exclusive and Exclusive but not commulative lock modes plese tell me
Lock objects are used to synchronize access to the same data by more than one program.
The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
There are three types of lock modes
1.Exclusive
2.Shared
3.Exclusive not cummulative
Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
please go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm
briefly :
You can lock the table or record by using following types of locking:
1) Exclusive (E) the locked data can only be displayed or modified by single user i.e the owner of the object. Access to other users is denied.
2) Shared (S) several users can access the same record simultaneously, but only in display mode and except the first one, who has asked for the data in update mode.
3) Exclusive not cumulating (X) it is similar to exclusive lock. It allows only a single user access. E can be called several times from the same transaction. In contrast, a lock type X can be called only once during the transaction. Any other call for this lock is rejected.
Activation of Lock Object
1) When you activate the lock object, the functions are automatically generated. And these are ENQUEUE-EZN and DEQUEUE-EZN. EZN is name of the lock object.
2) While ENQUEUE is used in program to set the code over the selected data depending upon the lock object arguments. DEQUEUE is used to release the lock.
Thanks
Seshu -
What is difference between table space and shchema
what is difference between table space and shchema ?
784633 wrote:
so each user has it own space of tables - schema ?yes, but let's clarify a bit ....
The "schema" is the collection of all objects owned by a particular user. So if user SCOTT creates two tables, EMP and DEPT, and a view EMP_RPT, and a procedure GET_MY_EMP, those objects (tables, views, procedures) collectively make up the SCOTT schema.
Those objects will be physically stored in a tablespace.
A tablespace is a named collection of data files. So tablespace USERS will be made up of one or more data files. A specific datafile can belong to one and only one tablespace. If a tablespace has more than one data file, oracle will manage those files as a collection invisible to the application - much like the OS or disk subsystem handles striping across multiple physical disks.
A specific object in the SCOTT schema can exist in only one tablespace, but not all objects of the schema have to be in the same tablespace. Likewise a tablespace can contain objects from multiple schemas.
and can one user to access tables of other users?As others have said - FRED can access tables belonging to SCOTT as long has SCOTT has granted that access to FRED. -
What is difference between 32 bit and 64 bit sql server memory management
What is difference between 32 bit and 64 bit sql server memory management
Thanks
ShashikalaThis is the basic difference...check if helps:
A 32-bit CPU running 32-bit software (also known as the x86 platform) is so named because it is based on an architecture that can manipulate values that are up to 32 bits in length. This means that a 32-bit memory pointer can store a value between 0 and
4,294,967,295 to reference a memory address. This equates to a maximum addressable space of 4GB on 32-bit platforms
On the other hand 64-bit limit of 18,446,744,073,709,551,616, this number is so large that in memory/storage terminology it equates to 16 exabytes. You don’t come across that term very often, so to help understand the scale, here is the value converted to
more commonly used measurements: 16 exabytes = 16,777,216 petabytes (16 million PB)➤ 17,179,869,184 terabytes (17 billion TB)➤ 17,592,186,044,416 gigabytes (17 trillion GB)➤
As you can see, it is significantly larger than the 4GB virtual address space usable in 32-bit systems; it’s so large in fact that any hardware capable of using it all is sadly restricted to the realm of science fiction. Because of this, processor manufacturers
decided to only implement a 44-bit address bus, which provides a virtual address space on 64-bit systems of 16TB. This was regarded as being more than enough address space for the foreseeable future and logically it’s split into an 8TB range for user mode
and 8TB for kernel mode. Each 64-bit process running on an x64 platform will be able to address up to 8TB of VAS.
Please click the Mark as answer button and vote as helpful if this reply solves your problem
Maybe you are looking for
-
ESS/MSS Multiclient Szenario
Hello, The scenario we want to build is: - Have one portal - Have one J2EE Engine - Have one backend with TWO clients (e.g. 100 and 200) - Have ESS/MSS running and connect to both clients (multiclient szenario) What has been done so far: 1) Copied fo
-
Hi folks, I'm trying to increase the length of the individual dash strokes (i.e. shorten the gaps between the dashes). Does anyone know how to do this; alternatively, is there a way I can make a custom dashed line? cheers Rich
-
Does Siri work on iPhone 4 os6.1.1
Hello peeps!....I use an iPhone 4 and recently update my O'S to 6:1:1.....does Siri work on it ( my iphone4)?
-
Lumia 800 keyboard predictive text recognises 'Iph...
Sorry but this is really too funny. Anyone else noticed? I guess you have to have language set to 'english'. Using a Lumia 800: Open a document and type 'iph'. The suggestions box says: "Ooh IPhone Upgrade" Then type 'Lumia' and it says: "Punishment"
-
Does anyone knows whether we can open both Technical and Pricing envelope in one Open Date and Time instead of approving Technical Document first and then open Pricing envelope. In a nutshell, we are using SRM 7.0 with PPS add on and like to use two