What is eating up data - very specific

I just bought an iPhone 5s and it eats data like crazy, even when on wifi. (I had a iPhone 4 before.)
So this morning I
- Reset statistics in settings->Cellular..
- Turned cell data off in Settings->Cellular for all except mail and browsers (missed stupid game center though, which stayed on)
- Turned cell data off in Settings->iTunes (see screenshot)
Now I see 3.2 MB used by System Services.
1. Game center used 1.7 MB. Why so much? I only played Angry Birds on my phone - not online. I have no connections in Game center. I used to play AB on iPhone 4, never had a data problem.
2. iTunes consumed 700 KB. Why, since it is off? Never had to worry about this when I had my iPhone 4 - just turned automatic downloads off and that was all.
There are other things but for now I would like to get to the bottom of these two. It's only 2+ MB, but the point is it shuld be zero.
Thanks in advance.

The more important question (for me anyway) is are you going over your data limit? Or are you getting close enough that you may be at some point and would have to be very careful with how you use your phone?
If not, you're good; if you are, then continue monitoring over the next week or so and see what you see on the phone.
Don't reset statistics daily - reset when your billing cycles ends.
I found that the Facebook and Tumblr apps were "phoning home" overnight, each night, to the tune of 10MB - 20MB. That's 300MB-600MB of completely wasted data that I could be using to stream music, etc. Plus they were doing the same thing at random points throughout the day also - somewhere between 2-3 times some days. So there goes half my data (essentially) for absolutely no reason.
I deleted both apps and left them off & only recently put Tumblr on my phone. Haven't had any problems, but I also have a new phone. Perhaps the issue was with the previous one.
Just some food for thought.
~Lyssa

Similar Messages

Data Merge specific cells, multiple (unlimited) entries on one page

HELP!
I've used the mail merge in the past with publisher to create labels and the like....in it on a single page I would code
<<address>> and in another part of the page <<next entry, address>> <<next entry, address>>
and so on and it would fill every area with the next entry in the excel file ad nauseum till complete. It was a simple way to extract specific continuous bits of information and apply it to a document on a single page.
I haven't been able to find anything similiar with Data Merge but there must be a way since InDesign has been more powerful than publisher in every way so far. Here is a sample of what I am creating
https://www.dropbox.com/s/7ewkwgmerz89ggf/Sample.pdf
Basically I have a book where every year my boss has been hand retyping the ENTIRE calendar not just into what you see in the sample above but through out an entire day planner also. I'd like to streamline the process but everytime I try and place a data point it says (for example) <<Day of Month>> and page 1 will ONLY take data point 1. I'm aware of the multiple selections per page function but it wants to lay it out in a grid that doesn't match my document and I have 365 data points to plug in to 2014 and another 365 for page 2 (2015)
Is there anyway to tell indesign I want <<Day of month, row 2, column 2>> in one box and <<Day of Month, row 3, column 2>> ....<<Day of Month, row 366, column 2>> All on one page so that I can place them precisely through out the document? This would allow me to make a simple adjustment to the CSV each year and then fill in the remainder with nothing more than a click.
Any help would be appreciated because I'd LOVE to save 20 hours of work every year and huge numbers of mistakes. This has to be something SUPER simple but no tutorial I've found covers it, they all mention the multiple entries per sheet option and that does NOTHING like what I want. I'd have to create 12 documents, data merge them, and then place them into the primary document and that is terrible workflow. Through out the final document not everything is in a comfortable grid like this so it would be even less useful.
We use CS3 in case that is relevant for the topic.
Thanks,
Tinker

I'm looking now but not finding anything promising. The calendar scripts all were for formatting very specific calander shapes and I need to be able (on one page) to have 7 entries in a non symmetrical layout (5 works days, then the weekends one over the other). Do you have any recommendations for scripts you like?
Maybe I'll create a document the holds the information a few date entires per page then place that into the master cropped and moved around as needed. I'm still looking through the exchange for something that makes the tool a little more powerful for me. I'll post it here if I find something that does what I need as that doesn't sound like a very efficient workflow.

I am running out of hard drive space so I clear 32GB of space at midnight, went to bed. When I wokle up I had no space left even though I had not used the computer, the system.lg is FULL of stuff and I have no HD space anymore? What's eating it up?

I am running out of hard drive space so I clear 32GB of space at midnight and went to bed.
When I wokle up I had no space left even though I had not used the computer, the system.lg is FULL of stuff and I have no HD space anymore?
What's eating it up?

WORD TO THE WISE
the OmniDiskSweeper was a very helpful download, because it laid out the HD and all the files on it in a "largest to smallest" fashion. When I did this I found that I had an inordinate amount of memory being taken up in my Mail Data folder, this did not make much sense so when I dug deeper I found that a 59MB scanned file that I had emailed 3 weeks ago had not been delivered, so the computer was retrying every minute and saving the history of what it was doing, so it was saving the 59MB file as well as the log about the 59MB file and hence for the last 3 weeks it's been chewing away at HD space recording the activity of the undeliverable file.
I deleted the Data record folders and removed the yahoo account from My Mail and reinstalled it with proper IMAP information and the HD is secure and holding at 331GB of free space. Like it ought to be.
I love the fact that if something very strange is happpening on your MAC there is a REASON....find it and fix it, and move on. In the PC world you would reboot 20 times, call some guy in India who will ony try to sell you a new subscription or warranty for $99 and never solve anything.
I am at rest once more, thanks for the tip

What are the master Data in SAP SD

Hi All,
I have a question. Even though its a naive question please bear with me.
what are the master data in SAP SD.
These are the one's i know.
1) Customer Master Data
2) Material Master Data
But what i want to know is does the following ones come under master data?
1) Price master data
2) Transporters master data(we are using transportation management)
3) Route master data
4) Customer material info records
5) Credit master data(iam using credit management)
What will be the master data for Transportation management(module), CIN(country India version), credit management & rebate processing
Thanks for your valuable time & knowledge.
Regards,
Pavan

Hi Pavan,
 Just to add some more valuable information.
Organisational master data : Every company is structured in a certain way. In order to work with the SAP System your company structure has to be represented in the system. This is done with the help of various organizational structures.
Condition master data : In sales and distribution, products are sold or sent to business partners or services are performed for them. Data about the products and services as well as about the business partners is the basis for sales processing. Sales processing with the SAP R/3 System requires that the master data has been stored in the system.
Material master data : In addition to sales and distribution, other departments of the company such as accounting or materials management access the master data. The material master data is stored in a specific structure in order to allow access from these different views.
Document master data : The processing of business transactions in sales and distribution is based on the master data. In the SAP R/3 System, business transaction are stored in the form of documents. These sales and distribution documents are structured according to certain criteria so that all necessary information in the document is stored in a systematic way.
Customer Master Data : or for that matter various business partners, we maintain data for them also called as the customer master data or vendor master data like that.
Thanks & Regards
Sadhu Kishore

I want to upgrade my software, but it says I need more start up memory. I keep my stuff on an external hard drive so I don't know what is eating my memory. How can I check this?

How can I figure out what is eating my memory so I can upgrade my software?

Do you mean disk storage space or physical RAM? The latter is memory, not the former. If you mean the former:
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
If you mean RAM, then you have to add more to the computer which is not possible on Air models.

How do I determine what is using the data on my iphone 5c?

In looking at our bill we have one person that is using almost triple the amount of data that the other users are, and we need to figure out exactly what it is that is eating all of the data on his phone as he doesn't have any clue what it could be. Any help to determine what is using the data on an iphone 5c?

emilyki, look no further. We can help you look into this data usage issue. First of all, we recommend that you disable data for a few applications on that iPhone 5C device to ensure that the applications are not depleting data from your allowance when not in use. You can do this by tapping Settings>Cellular>Scroll down to all the downloaded applications and disable data for applications.
Additionally, you also have the option of disabling data in Settings>Cellular when you're not using data or connected to Wi-Fi.
Lastly, you may view the data usage sessions for that line online at My Verizon to determine when data is used the most. http://bit.ly/xB4iTc Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

Hi to all... What is a XML data provider,stored Procedure, personal data

Hi to all... What is a XML data provider,stored Procedure, personal data providers in deski. when we use these data provider in desk top intelligence.. and use of it.
Please give detail description of the above...
Thanks for reply..........

Hi,
We can create Desktop Intelligence reports using XML Data Provider, Personal Data Files and Stored Procedure.
Following is some detailed information about these three.
Xml data provider:
Xml data provider is used for the integration of external data sources stored in XML format.
This is similar to HTML.
Stored Procedure:
A stored procedure is a set of SQL commands that has been compiled and stored on the database server.
Once the stored procedure has been "stored", client applications can execute the stored procedure over and over again without sending it to the database server again and without compiling it again.
Stored procedures improve performance by reducing network traffic and CPU load.
Personal data files:
u2022     *.prn files
     A PRN file is a special type of file which contains instructions for a printer, it tells the printer what to print on the page and where as well as which paper tray to use, what the paper size is and a number of other controls.
u2022     *.asc files
      Between the values of a row any number of carriage returns or blanks are allowed. In any case it is strongly recommended that the data table be stored in such a way that it can be read and edited easily.
       The values may be stored in any format (integer, floating point, exponential notation) and they must be separated at least by one blank. The class information must be of integer type, the row identifiers are interpreted as strings. The lines can have any length and must not contain any comment.
u2022     *.csv files
A CSV file is a specially formatted plain text file which stores spreadsheet or basic database-style information in a very simple format, with one record on each line, and each field within that record separated by a comma.
Regards,
Pradnya Kokil

What are the usual date field validations

Hi all,
can you please tell me what are the usual date field validations in selection Screen
Thanks and regards ,
Madhavi pilla

Once you declare it as TYPE SY-DATUM, usually that is enough. Sometimes we will also check that it is not less than '18000101' or greater than '99991231'. Or if you have a specific date range that applies to your program you could check the field contents against that. I hope this helps.
- April King

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts?

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts? I have closed everyting I can, even took the phone to Verizon and they are not sure what is going on. My company email is active and pushes to the phone....I use Safari regularly to look up stuff for personal and work use. I am on Facebook but have turned it off in notifications. Four phones and a hotspot on the account....we have 6g and have never come close to it, until lately and it's my phone that's eating up the gigs. So what the heck is going on?

Go to Settings/Cellular and you can see how much data each app is using. You can Reset Statistics, then track all of the apps data usage.

What are the contents in technical specifications

What are the contents in technical specifications
could u plz explain clearly

hi rajeshreddy,
Below are the standards for Tech specs
1.1 Development Attributes
Program Name:
Title:
Application:
Development Class:
Message Class:
Program Type:
Execution Mode:
Schedule Frequency:
Variant:
1.2 Program Functionality
1.3 Output Fields
Output Label
Related SAP table-field (if any)
Length
Output Characteristics
1.4 Proposed Solutions
1.5 Solution to be implemented
1.6 Reasons of selection/rejection
1.7 Pseudo-Code / Flow Logic of the selected solution
1.8 Selection Screen
1.9 Database Tables Used
Table Name
Table Description
How the table is used in the program
1.10 External Files Used
1.10.1 External File Layout <file name>
1.11 Components External to Program Used
1.12 Error Conditions
1.13 Key Technical Test Conditions
1.14 Sample Test Data
1.15 Assumptions
1.16 Comments
regards,
amit m.

I'm finally moving my photos from my PC to my MacBook Pro. I have 8 years worth of photos organized into very specific albums. Can I import the album structure directly into iPhoto or am I going to have to recreate everything in iPhoto?

I'm finally moving my photos from my PC to my MacBook Pro. I have 8 years worth of photos organized into very specific albums. Can I import the album structure directly into iPhoto or am I going to have to recreate everything in iPhoto?

If you want to duplicate your Folder Tree in iPhoto:
Start at the bottom of the hierarchy and drag a folder of images to the Album Heading in iPhoto. The pics will be imported and an Album of the same name created.
You can then create the Enclosing Folders in the iPhoto Window (File -> New Folder) and drag the Album to it. Folders can contain other Folders (Nested Folders) and Albums.
However, is your folder system date based? Then this form of organisation is a bit pointless in iPhoto when Smart Albums or the Calendar tool (Click on the wee magnifying glass in the Search Box) mean you can find the photos taken on any day, month or year at a click. With Smart Albums it's easy to find photos from specific range - say, June 3 to August 25, 2009 etc.
If your folder system is theme based - Xmas pics, Birthday pics etc, then you'll find Keywords are much more flexible, and can be used in conjunction with other criteria for making Smart Albums and searches.

What is multipart/form-data ?

what is multipart/form-data ?
generally A form have some input fields and a submit button ? but what is
multipart/form-data ? or is it same thing ?

http://www.w3.org/TR/REC-html40/interact/forms.html
enctype = content-type
This attribute specifies the content type used to submit the form to the server (when the value of method is "post"). The default value for this attribute is "application/x-www-form-urlencoded". The value "multipart/form-data" should be used in combination with the INPUT element, type="file".

Very specific question about iOS 7 and podcasts

I have a very specific question regarding the playback of podasts under iOS 7.
Right now, I've still got iOS 5.1.1 (iPhone 4S).
What I would like to have is a way to play an episode from a podcast that I have not yet finished, and when I double-click the ear-bud's middle button, then I would like to jump (skip) to the episode in the list, even if that episode is from a different podcast.
Right now, under iOS 5.1.1, I achieved that by creating a smart playlist in iTunes that collects all the episodes from all podcasts with a play count == 0.
This smart playlist is mirrored to the iPhone.
It works very well.
It seems to me that something like that is not possible under iOS 6, so I skipped that.
My question now is whether I can acheive this under iOS 7.
I would be most grateful if some kind soul could shed some light on that for me.
Best,
Gabriel.

Hi Larry,
Thanks very much for posting a reply.
I do absolutely intend to print a test copy first - but thanks to your advice at least know the spine is going to be ok!
I didn't realize that method would give me a nice landscape image of the unbound cover - I'd mistakenly remembered that it gave only one page at a time for front and back.
Thanks for helping out.
Best,
Marco

What time the Oracle Data Mining 10g ?

What time the Oracle Data Mining 10g ?

If you are referring to the 10.1 release of the ODM user interface, that should be available in beta form very shortly(a couple weeks) with the final release very soon after that.

What is eating up data - very specific

Similar Messages

Maybe you are looking for