What is Error - 2000: ?

I just purchased Quicktime Pro and can't seem to be able to export a movie to CD or DVD that I can play on a different computer than the one I created the movie on.
I have tried to export to .mov files, 3GP files,m4v files. I can play them all on my computer through Quicktime pro. When I burn them to a CD or DVD and try to play them on another computer using Quicktime, I get a message that says, Error -2000: a necessary data reference could not be resolved. Does anyone know what I am doing wrong? Thank you in advance.

Did you export as a "Self Contained" .mov file?
If not the needed resources did not move with the file and only the local machine that made it can view them.
To properly play back the QuickTime file burned to any media you must "copy" that file from the CD or DVD to the local machine.

Similar Messages

Can't import Flip video, getting error -2000

I'd like to view a number of videos made with a Flip Mino HD with an iPod Touch. I'm trying to convert them into iPod format using iTunes 10.0.0.68 on a Windows 7 computer. The videos are 1280x720 mp4.
I can play the videos in iTunes. Altough iTunes is a VERY SLOW player for these files. Other players on this machine (windows media player, vlc, etc) play the videos perfectly. This is a quad-core 3gHz box with 4gb of RAM, so it's not like it's resource-deprived. MP4 videos do require a lot of processing power, but like I said, other players have no trouble at all. iTunes, however, halts and stutters. Other players use about 17% of CPU for these, itunes needs 30% or more. That's not directly relevant to the issue here, just an observation. Anyway...
I can select a video track and then use Advanced->Create iPod or iPhone version. A 'Converting...' icon appears in the left sidebar and the track begins converting. I've tested this with a variety of clips. Even the simplest 22 second clip fails. It's about 29mb in size. I've tried it both from a local drive and from a network share. Same problems. The conversion progress bar appears to get around 75% complete and then it shows this error:
Error occurred while converting the file "2009-12-05 13 16 26". An unknown error occurred (-2000).
What does error -2000 mean in this context?
Where does iTunes create the converted files? What naming does it use for the newly converted movie?

Candygirl,
Can you please give us a bit more information.
Knowing about your computer, the CPU, installed RAM, OS and especially the full details of your I/O, i.e. all of your HDD's, their size, speed, controller type amount of free space on each, plus how you have them allocated.
Then, knowing the settings for your Sequence would be useful, along with the full specs. of the Flip's MP4 files, would be useful.
Good luck, and thanks for that info,
Hunt

Error -2000 a necessary data reference could not be found

I'm trying to play a DVD movie in QuickTime. When I drag from the file and drop on top of the QuickTime icon I get this message.
Error -2000 a necessary data reference could not be found
I have followed the directions I found on the web site.
In Windows Explorer, double-click the file or drag it to the QuickTime Player application icon.
Choose File > Open and select the file.
What is the problem? Is there no list of QuickTime error messages and what they mean? I've been looking everywhere for something that applies to me.

Try going back to QuickTime 7.4, we've seen the same problem occur with the 7.5 update. How did you make the .mov file that plays all of the files? For us, the problem shows up with reference movies (such as that .mov) made on a Mac, but works fine if it is created on Windows.

Only get message error -2000 when trying to play DVDs

I just downloaded Quicktime Pro and I have Quicktime 7.0 My computer is PC running windows Vista. When I drag the file to the Quicktime icon to play a DVD using the player it says error -2000. If I try to open the file Quicktime is not an option. Does anyone else have this problem? What do I do?

I'm having the same problem. Until this week, the .mov files my friend was making for me with his camera played through Quicktime without a problem. They opened automatically, but only through the DVD player. Currently, after updating (thinking that was the problem) I can see that there is a file on the disc when in the DVD slot, but if I try to open it, I get error -2000. If I place it in the CD slot, it looks like an empty disc. When I did a system restore and went back to the old version of Quicktime that has worked in the past, I had the same problem.
I'm wondering why it played from DVD before, but not now? Any ideas???

HT4061 What is error 2001

I dropped my iPhone in water yesterday night. I immediately turned it off and put it in rice for the rest of the night. This morning I tried turning it on and it told me to connect to itunes for a restore and update. When I tried, I got unknown error (2001). I was wondering what that was?

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Could also be that the water fried the phone....

Quicktime Error (-2000) after sending AppleProRes 422 clips to Shake

Hi there, I have been using FCP (7.02) and Shake (4.11) infrequently, mainly the smooth cam node with clips from my DV Camcorder. My new Full HD camcorder is recording AVCHD video which is transformed into Apple ProRes 422 when logged and transferred to FCP. After sending these sequences or clips to Shake, the node turns red and the clips don't show. In Shake's console appears an message related to the imported file which says <quicktime error (-2000)>.
Is there any way to solve this problem and does anyone know what causes it?

For what it's worth, QuickTime error -2000 means "Could not resolve data ref." Ordinarily I would assume that you were using reference movies but this clearly isn't the case.
It would seem that Final Cut Pro is formatting the movie clips in a way that Shake doesn't recognize so it might be worth recompressing in QuickTime or Compressor to see if that solves the issue.

Error -2000 necessary data reference could not be resolved-- HELP!!!

So, I work in a nurse's office at a medical school editing video on an iMac 2.33 GHx Intel Core 2 Duo with 3GB 667 MHz DDR2 SDRAM. Mine is the only mac in the office, the rest of the secretaries, nurses, and grad students are on windows XP.
My job is basically to edit videos (color correct, blur faces of patients' relatives, etc) from a study they did, and export the videos to a DVD (as a data disk, not a DVD with menus) so they can show them to each other and various committees on their windows machines.
For the longest time, this went off without a hitch, but most recently, I tried burning some .mov files to disk, and whenever they play on any machine (windows xp) we get "Error -2000 necessary data reference could not be resolved." I re-burned the disks, and now, they are selective! They play on some of the office computers, but not all... including the target machine where they will ultimately be screened for a committee... even on the 2nd batch of disks, that error is still present...
I know about video editing, and to some degree disk burning (I used the "New-->burn folder" option to create the data disk, burning them at 2x speed for reliability). But I don't know enough about computers to figure out what this error means, or why these disks won't work!! Somebody please help!
(and you can save the sales pitch... I'm a mac user through and through, and there is no way in heck my office will ever have enough money or motivation to switch over)
Thanks for your help!!

I wont address the problem but that you should have your videos. Dont you still have them on your camera? If not, just get it from your friend. Btw, do this the next tíme around ... Whenever you plug in the camera and your iPhoto/pic Application opens up, BEFORE you have iPhoto import them, use Finder to copy the photos over to your HDD or an external drive. This is so that YOU always have the originals BEFORE your pic Application does.

What is error 1004

what is error 1004

The alert message in iTunes may include one of the following numbers (or the message may include a number not listed here):
1, -1, 2, 4, 6, 9, 13, 14, 20, 21, 23, 26, 28, 29, 34, 35, 36, 37, 40, -48, -50, 1000, 1002, 1004, 1011, 1013, 1014, 1015, 1479, 1600, 1601, 1602, 1603, 1604, 1611, 1631, 1638, 1639, 2001, 2002, 2005, 2006, 2009, 3002, 3004, 3013, 3014, 3015, 3194, 3200, 9006, 9807, -9808, 9844, 4026xxxxx.
Click the link for the error code you have. If it's not listed here, check the error messages below, and then if necessary follow the advanced steps below to resolve the issue.
Resolution
Specific error messages and resolutions
Collapse All | Expand All
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service. If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 13, 14, 35 and 50 (or -50)These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
iTunes cannot connect to the iPhone because an invalid response received from the device
This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above.
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
Hang during restore process

TS3694 What is error code 1667?

What is error code 1667?

The TS3694 article you attached explains:
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
UPDATE - Sorry, 1667 is not included there. Sorry.
Message was edited by: sberman

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

What does error message 150:30 in Photoshop Elements 8 mean?

I have adobe photoshop elements 8 and, out of the blue, I get a message stating that I need to reboot for it to work. I reboot and it still doesn't work. Then there is an Error message 150:30 exhibited on the page. Adobe is too irresponsible to simply tell me what the error message means or provide a list for it, at least one I can find so I thought I'd solicit the good graces of other for help since help from Adobe is simply a shakedown for money due to their negligence and failure to support their products.

What's your OS? If you are on a Mac then try this Adobe Official Solution:
<http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html>
Hope this gets you started.

What does (error code -600) mean?

What does (error code -600) mean?
I received this code in a pop up window while trying to open iTunes from my Apps folder.

procNotFound
= -600, /*no eligible process with specified descriptor*/
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Any change?

I have windows 7 and just purchased quicktime pro, I get error-2000 ever time I try and open a dvd.

I have just paid £20 for QuickTime 7 pro and I cannot open a DVD. I get error-2000 every time. Any advice?

Neither QuickTime Player or the Pro upgrade can play commercial DVD's.
The MPEG-2 format found on non DRM DVD's requires additional software.

TS3694 I have an ipad, 2 yrs old, that will not restore, due to error 3. what is error 3?

What is error 3 ? I have a list of many but not that one. Ipad opens with a silver apple on a black screen, then when you hit HOME, it turns on for 30 seconds and a black screens comes in from the left, shutting it down. After 10 tries i got a graphic to plug into itunes, so did it. My mac worked on iy for 30 minutes, then came back with error 3.
The ipad was taken to an Apple store & the genious said there was a battery problem and there was nothing they could do?
Ideas?

Thanks Alfred,
My iTunes on the Air are up to date. Tried 3 times to restore and always get error 3. The iPad now only shows the graphic to plug into iTunes.
Called hotline to Apple rep yesterday, (chat) then they phoned me. He couldn't figure it out and went to consult a colleague. That was yesterday afternoon & he hasn't called back yet. This is on my dime.
Any idea what error 3 is.
Talaguniak
Mac user since 1984,
512k origininal, just smoked itself 4 months ago due to internal corrosion.
Now using Air, iPad mini, iPhone

Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

What is Error - 2000: ?

Similar Messages

Maybe you are looking for