What is it with Arch?

What is it with Arch?? I added my UserName 'rick' to all groups, I still can't mount my drives, giving an access error stating I don't have permission. Wait, you can't upload files on this forums?? . I cant send the error message in a screenie now, .

wonder wrote:
richardm198030 wrote:What is it with Arch?? I added my UserName 'rick' to all groups, I still can't mount my drives, giving an access error stating I don't have permission. .
you are just login in the wrong way. Please describe your method to start the graphical interface.
I am using startx to log into my rick account.. I first sign in as rick in Terminal, rather than GDM, then I type startx and hit enter, is that the reason why I can't mount drives?

Similar Messages

What is wrong with networking with 64bit Arch?

I have 3 hosts behind a router:
1 laptop with Arch i386
1 laptop with Arch x86_64
1 nettop with Arch x86_64
If I use 64 bit Arch, after about 15 minutes without touch anything (just in idle) the whole network stop working -> there is no internet connection, only LAN internal communications are available, but they are very slow, and the solution is to restart of the router.
I tested this with 3 different routers and the issue remains.
With 32 bit Arch there is no problems at all.
Do you experienced such kind of problems? This is very annoying!
May be 64 bit driver broke packets.

My network card of the nettop is Realtek RTL8167 and I didn't install any additional driver, just use those with installation. Main board is AT5ION-I.
Yesterday evening I migrate form i686 to x86_64 on the nettop - clean install, and after that upper mentioned problems began.
I have experienced such kind of problems in laptop with 64 bit Arch, too. The network cards are Broadcom (don't remember the model) and Intel WiFi 5100AGN.
All my analyses lead to problem with 64 bit driver and probably causing much network flood and broken packets.
PS: My LAN network is 10.74.87.0/24.
Last edited by clovenhoof (2011-12-13 10:06:30)

What wireless card works well with Arch?

Hello there
I recently finished building my quad-core (yay!) pc and because I don't want to run a long ethernet cable across the house, I was wondering if you guys knew any wireless cards I could use for my desktop (PCI/PCI-Express) that would work well with arch. I'd prefer to order it over the internet, and don't want to spend more than $100 (tax/shipping included). I know there was an earlier thread about this, but I didn't want to revive it and I also had some "requirements" in which I pick out. All help is appreciated
Last edited by itsbrad212 (2010-03-23 03:30:35)

655321 wrote:
Atheros Wireless cards work great on linux, I searched some on amazon for you there are some very good picks. They have extended range also
http://www.amazon.com/s/ref=nb_sb_noss? … ci&x=0&y=0
Thanks I'll have a look at those. I have had great experiences with atheros cards on my laptop so hopefully these will act the same
Last edited by itsbrad212 (2010-03-23 04:54:58)

A simple file server with Arch Linux?

Hello everyone.
I had a lucky day to day and was given an old Pentium III based server with 512MB of RAM. I want to set up a server for my house that can basically act as NAS (network attached storage) and stream files to other members of the family's machines. I also want to install rTorrent and be able to download multimedia on to the server. I also wish to be able to access the server from a Windows machine as I would prefer if the server could be headless (no monitor or keyboard/mouse) after the initial installation of ArchLinux.
Could someone explain how I might go about performing these tasks? I have never used Linux before (other than Ubuntu for web browsing). I am of course comfortable with installing the OS but not sure about how I would set it up like I want.
Thanks for reading and I look forward to reading your response.

You can use samba to share the files between the computers (this will work with Windows as well as Linux and Mac OS X).
As for rTorrent, you can install rTorrent and run it via ssh. However I would recommend deluge. There is a server daemon which you would run on the server. And then a client which you can run on a linux machine (there might even a be a windows version).
To use a headless server you need (well you don't need, but it is very helpful) to setup ssh. I am not sure what you mean by stream files to other members of the family's machines (share files)?
Also if you are not all that familiar with linux, be prepared to do some serious reading or maybe look at using something like ubuntu (but you will still have to read). Using arch would be a great way to learn linux more than what you have with ubuntu.

How to setup grub2 with arch linux and xen, lvm on luks

OK, so I tried downloading this package from AUR: https://aur.archlinux.org/packages/xen-git/ , but that has patching problems as noted in the comments. It looks like the packagebuild sets up all the xen stuff for you, but I can't seem to get the package to install because of the error's while patching. If anyone can point me in the right direction on what all the extra files in the PKGBUILD are for or how to debug problems with PKGBUILDs not working because of patches.
So next I just tried to compile the latest xen from git://xenbits.xen.org/xen.git (with ./configure, make, make install) and that seemed to go fine, but I'm a bit confused:
1. Do I have to do any additional configuration for xen when working with arch linux? On ubuntu I could just compile the source, update grub, and make sure to start the x services at runtime.
2. How do I set up grub to load xen with this setup? Right now this is my /boot/grub/grub.cfg:
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda3:vgStorage"
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
~
I've tried throwing in a line like: XEN_HYPERVISOR_CMDLINE="cryptdevice=/dev/sda3:vgStorage", but nothing new shows up on the grub boot menu.
First time trying to set up a non-ubuntu system, please help!

As for XEN.... well you could always try QEMU/KVM or LXC.
As for the LVM2-on-LUKS/dm-crypt
My /etc/mkinitcpio.conf looks like this...
MODULES="aesni_intel ata_generic ata_piix nls_cp437 ext4 intel_agp i915 dm-snapshot"
BINARIES=""
FILES=""
HOOKS="base udev autodetect block keymap encrypt lvm2 filesystems keyboard fsck shutdown"
/etc/defaults/grub
GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda2:root:allow-discards"
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
GRUB_TERMINAL_INPUT=console
GRUB_GFXMODE=auto
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_DISABLE_RECOVERY=true
The running grub config looks like this
/boot/grub/grub.cfg
9 insmod part_gpt
10 insmod part_msdos
53 if loadfont unicode ; then
54 set gfxmode=auto
55 load_video
56 insmod gfxterm
57 set locale_dir=$prefix/locale
58 set lang=en_US
59 insmod gettext
60 fi
61 terminal_input console
62 terminal_output gfxterm
63 set timeout=3
84 menuentry 'Backup, Arch Linux grsec kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-grsec kernel-true-12341234-8080-8080-8080-332200882255' {
85 load_video
86 set gfxpayload=keep
87 insmod gzio
88 insmod part_msdos
89 insmod ext2
90 set root='hd1,msdos2'
91 if [ x$feature_platform_search_hint = xy ]; then
92 search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
93 else
94 search --no-floppy --fs-uuid --set=root BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
95 fi
96 echo 'Loading Linux grsec kernel ...'
97 linux /vmlinuz-linux-grsec root=/dev/mapper/VolGroup00-lvroot rw cryptdevice=/dev/sda2:root:allow-discards quiet
98 echo 'Loading initial ramdisk ...'
99 initrd /initramfs-linux-grsec.img
100 }
Things to note:
Numerical UUID is the UUID of the ROOT partition.
Alphabetical UUIS is the BOOT partition
hd1,msdos2 AND ahci1,msdos2 are how the Grub Bootloader numbers the drives not Linux.
I have my BOOT partition on a USB stick, and it is the Second partition.
So, that would make it, Device 2 and Partition 2
Device numbering starts at 0
Partition numbering starts at 1
Oh, and note that you don't need ":allow-discards" ... at all but certainly if you don't have an SSD. Also note that I included the line numbers so it is very clear that I didn't post the whole thing, but instead what I thought was relevant. Finally, I am loading modules that I don't even need, but what the hell... if it ain't broke, don't fix it
Last edited by hunterthomson (2013-12-04 08:31:45)

Problem when Installing from Existing Linux with Arch's Image

Hey!
I'm just getting started with Arch Linux. I made a 20GB unallocated space between my Win7 and Ubuntu partitions, created a new ext4 partition and I'm currently following this guide ("another method" section) in order to install my first attempt of Arch Linux.
I'm on a 64-bit Ubuntu and want to install a 64-bit Arch Linux too, so I'm using the image archlinux-2011.08.19-core-x86_64.iso and in the process of following the instructions in the mentioned guide, I replaced i686 by x86_64.
The problem comes up when I try to do the chrooting, where I get:
chroot: failed to run command `/bin/bash': No such file or directory
Any idea what could I be doing wrong?
Thanks!

Ok, I had just messed up when mounting the different directories. Sorry for the noise...
Anyway, found more errors when running:
aif -p interactive
about not finding /lib/modules/3.0.0-13-generic/modules.dep... what makes me think that this guide is intended to be followed when running also an Arch as the Existing Linux.
I think I'll just go with the flash drive option...
Cheers!

What to do with a i586 processor

Hello, I got a Gecko Edubook: www.norhtec.com/products/gecko/
I'm not gonna lie, I'm a lazy person, and therefore I love arch linux. Although arch doesn't run on i586. What would you suggest being the easiest way to get this thing up and going, with a basic install featuring like nothing. I love EVERYTHING with arch linux, except for that it doesn't run on i586. I've tried arch for i586, but the project seemed kinda dead, and I gave up. I won't use it for anything else than webbrowsing (uzbl), mplayer, if the graphics can do that, wireless, and terminal programs.
What would you suggest:
Get gentoo on it, either compiling on it or crosscompiling? I don't need to be very up to date, so I won't need to recompile every day.
Get arch i586 working, and compile everything. Crosscompiling?
Get ubuntu/whatever on it, and remove as much as I can without breaking it.
LFS?
I got the computer with ubuntu/wattos and managed to bork X, apt-get, /var and with /var nethack. I use it for school atm, but cannot do much else than edit stuff in vim. Not that I need much more atm, but I will go to paris by bus the 4th, and it would be cool if I could use it for a little more by then. I don't have very much experience with anything else than arch, so it better be well-documented. (Arch is getting me spoiled )
/500 post, yay!

zowki wrote:
From the edubook website:
The Edubook will run Windows XP and many x86 Linux Distributions. We have brought up several Linux Distributions to the Edubook, to include, Ubuntu 8.04, Ubuntu Remix, Debian 5, Puppy Linux 4.12, Edubuntu, Zen and many others. We are currently shipping the Edubook with WattOS. WattOS is a fast and efficient Linux distribution based on Ubuntu 9.04.
And out of curiosity where can you buy an edubook? I never bought a netbook before but I find this interesting.
A google search for "edubook" yields...
http://www.norhtec.com/products/gecko/index.html (There's an "Order Now" link at the bottom)
Oh, and regarding the topic, I'll second the recommendations for Debian. It seems to be ideal as a solid and mostly nonbloated distro which will run on nearly anything.

[SOLVED] Luks with /arch/setup installation , fails at boot

Hi all,
So I tried to install arch on virtualbox with encrypted partitions (root /, /home/ and swap), but it fails at boot.
/dev/sda1 is /boot
/dev/sda2 is swap
/dev/sda3 is /
/dev/sda4 is /home
The root partition seems to be loading fine because it asks for my password, then the boot sequence goes on, until the /home/ (apparently) :
:: Bringing up loopback interface
:: Unlocking encrypted volumes: chome..Usage: cryptsetup [-?vyrq] (...all the options...can't copy paste with virtualbox)
/sbin/cryptsetup: Unknown action
failed [FAIL]
/dev/mapper/croot: clean, 27576/457856 files, 166316/1830898 blocks
fsck.ext4: No such file or directory while trying to open /dev/mapper/chome
Possibly non-existent device?
/dev/sda1: clean,29/24096 files, 20790/96356 blocks
[FAIL]
It seems that it tries to open /dev/mapper/chome but it's not mounted yet
In my /etc/crypttab, I added the lines :
chome /dev/sda4 none luks
cswap /dev/sda2 none luks
/etc/fstab (I didn't change anything, /arch/setup configured it that way) :
/dev/mapper/chome /home ext4 defaults 0 1
/dev/mapper/croot / ext4 defaults 0 1
/dev/mapper/cswap swap swap defaults 0 0
/dev/sda1 /boot ext2 defaults 0 1
And grub :
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/mapper/croot cryptdevice=/dev/sda3:croot ro
initrd /initramfs-linux.img
What I wanted to do was to have swap,root and home encrypted partitions mounted at boot, but maybe it is not possible?
I tried a lot of configurations for /etc/fstab and /etc/crypttab according to what I could find on the net but nothing worked. I read the whole tutorial https://wiki.archlinux.org/index.php/Sy … _with_LUKS but there is no config for fstab or crypttab or grub when installing with /arch/setup
Thanks for any help !
Last edited by John0000 (2012-04-12 12:50:18)

Indeed you have a point, putting password in plaintext isn't very safe.
There is a good alternative though: https://wiki.archlinux.org/index.php/Sy … _a_Keyfile
the reason why you don't have a passphrase for root in a file somewhere is that you provide this passphrase during boot-time.
Somewhere during boot you get the option to unlock you root device by typing in a passphrase... right?
ro means that the volume is mounted read only http://linux.die.net/man/8/mount

HP DV6000 randomly freezing with Arch Linux

Hello,
Just to clarify I am working with Arch Linux as a Web Developer, therefore I do have special needs such as having 20+ tabs open with vital information in different pages.
I can assure that after using Windows XP, Windows 7, xUbuntu, Linux Mint and Ubuntu I have never had such breaks or freezes in this machine.
The freezes are identifiable when the mouse seems to be very slow to move, the computer very slow to respond, the cursor of the icon does not change within the context where it is, I can't even open the menu bar to access the terminal (using Terminator).
After noticing these randomly freezes, I've started to keep the Terminator open with top command inserted. After seeing the values of percentage usage in CPU or RAM, the levels don't even go up more than 20%. However, I notice that the laptop suddenly starts heating a lot.
The solution is just to wait with some luck about 10 minutes. If it does not go on after that, I need to turn off the computer by pressing the button or unplugging the battery (yeah, the battery is dead too).
Some main packages I currently use are:
- Cinnamon
- Filezilla
- Netbeans PHP IDE 8.0
- Skype
- Geany
- 7-Zip FM
- Adobe Flash Player
- Chromium (my main browser)
- Firefox
- SSH
- Htop
- VLC Media Player
- Terminator
Any ideas of what could it be?
Thanks!
Last edited by SirPereira (2014-05-19 14:52:56)

Rexilion wrote:
It seems you do not have any swap. Correct?
Could you provide the output of dmesg after the occurance?
Yes, you are correct, I do not have any swap. Would I benefit from it? I guess I never used it.
After the occurance you mean, after the freeze? I will try to do it, but it is rare the case when the computer is able to not freeze at all.
Got it now:
The output of dmesg:
[ 0.443614] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.443838] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.444061] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.444184] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.444187] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.444190] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.444210] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.444213] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.444217] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.444237] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.444239] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.444243] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.444266] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.444271] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.444290] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.444293] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.444295] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.444297] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[ 0.444298] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[ 0.444300] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[ 0.444305] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.444324] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.444329] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.444345] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.444364] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.444399] intel_idle: does not run on family 6 model 23
[ 0.444441] GHES: HEST is not enabled!
[ 0.444500] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.444971] Linux agpgart interface v0.103
[ 0.445012] rtc_cmos 00:03: RTC can wake from S4
[ 0.445141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.445167] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.445178] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.445322] TCP: cubic registered
[ 0.445446] NET: Registered protocol family 10
[ 0.445656] NET: Registered protocol family 17
[ 0.445905] registered taskstats version 1
[ 0.446529] Magic number: 14:681:877
[ 0.446613] rtc_cmos 00:03: setting system clock to 2014-05-20 08:51:33 UTC (1400575893)
[ 0.446705] PM: Hibernation image not present or could not be loaded.
[ 0.447929] Freeing unused kernel memory: 1120K (ffffffff818d8000 - ffffffff819f0000)
[ 0.447931] Write protecting the kernel read-only data: 8192k
[ 0.450553] Freeing unused kernel memory: 904K (ffff88000151e000 - ffff880001600000)
[ 0.451721] Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
[ 0.458667] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.460077] systemd-udevd[47]: starting version 212
[ 0.478236] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 0.489263] ACPI: bus type USB registered
[ 0.489293] usbcore: registered new interface driver usbfs
[ 0.489304] usbcore: registered new interface driver hub
[ 0.494274] sdhci: Secure Digital Host Controller Interface driver
[ 0.494278] sdhci: Copyright(c) Pierre Ossman
[ 0.494499] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 0.494708] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[ 0.494739] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 0.494796] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 0.499195] usbcore: registered new device driver usb
[ 0.499671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.499940] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.500201] ehci-pci: EHCI PCI platform driver
[ 0.500769] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.500777] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.500786] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.500808] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[ 0.501200] hub 1-0:1.0: USB hub found
[ 0.501209] hub 1-0:1.0: 2 ports detected
[ 0.501580] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.501587] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.501593] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.501626] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
[ 0.503178] SCSI subsystem initialized
[ 0.503409] hub 2-0:1.0: USB hub found
[ 0.503419] hub 2-0:1.0: 2 ports detected
[ 0.503907] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.503914] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 0.503929] ehci-pci 0000:00:1a.7: debug port 1
[ 0.507842] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.507859] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdd005c00
[ 0.508093] libata version 3.00 loaded.
[ 0.508752] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.508793] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.513351] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.513563] hub 3-0:1.0: USB hub found
[ 0.513629] hub 3-0:1.0: 4 ports detected
[ 0.536813] hub 1-0:1.0: USB hub found
[ 0.536828] hub 1-0:1.0: 2 ports detected
[ 0.556530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.560059] hub 2-0:1.0: USB hub found
[ 0.560067] hub 2-0:1.0: 2 ports detected
[ 0.560345] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.560352] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 0.560366] ehci-pci 0000:00:1d.7: debug port 1
[ 0.563401] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[ 0.568179] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.568198] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdd005800
[ 0.576683] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.576856] hub 4-0:1.0: USB hub found
[ 0.576865] hub 4-0:1.0: 8 ports detected
[ 0.577213] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.577220] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.577228] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.577249] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[ 0.577420] hub 5-0:1.0: USB hub found
[ 0.577429] hub 5-0:1.0: 2 ports detected
[ 0.577678] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.577684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.577691] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.577712] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
[ 0.577877] hub 6-0:1.0: USB hub found
[ 0.577885] hub 6-0:1.0: 2 ports detected
[ 0.578124] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.578130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.578136] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.578156] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
[ 0.578323] hub 7-0:1.0: USB hub found
[ 0.578331] hub 7-0:1.0: 2 ports detected
[ 0.578566] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.578573] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.578579] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.578609] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
[ 0.578778] hub 8-0:1.0: USB hub found
[ 0.578786] hub 8-0:1.0: 2 ports detected
[ 0.579138] ahci 0000:00:1f.2: version 3.0
[ 0.579314] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.579386] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.579390] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
[ 0.597458] scsi0 : ahci
[ 0.597577] scsi1 : ahci
[ 0.597688] scsi2 : ahci
[ 0.597787] scsi3 : ahci
[ 0.597890] scsi4 : ahci
[ 0.597988] scsi5 : ahci
[ 0.598049] ata1: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005100 irq 46
[ 0.598053] ata2: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005180 irq 46
[ 0.598054] ata3: DUMMY
[ 0.598056] ata4: DUMMY
[ 0.598058] ata5: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005300 irq 46
[ 0.598060] ata6: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005380 irq 46
[ 0.916700] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.916718] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.063421] firewire_core 0000:06:00.0: created device fw0: GUID 0000000000000000, S400
[ 1.083353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.083369] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.083987] ata1.00: ATA-8: TOSHIBA MK5055GSX, FG002C, max UDMA/100
[ 1.083990] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.084680] ata1.00: configured for UDMA/100
[ 1.084792] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5
[ 1.087088] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[ 1.092125] ata2.00: configured for UDMA/100
[ 1.113361] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.203938] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50L SC04 PQ: 0 ANSI: 5
[ 1.208648] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.208739] sd 0:0:0:0: [sda] Write Protect is off
[ 1.208743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.208779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.290173] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.323084] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.323088] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.323226] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.325332] usbcore: registered new interface driver usbhid
[ 1.325335] usbhid: USB HID core driver
[ 1.325918] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/0003:045E:0750.0001/input/input2
[ 1.326088] hid-generic 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input0
[ 1.336169] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/0003:045E:0750.0002/input/input3
[ 1.336217] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input1
[ 1.418377] sda: sda1 sda2
[ 1.418731] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.426688] tsc: Refined TSC clocksource calibration: 2394.269 MHz
[ 1.446699] usb 4-4: new high-speed USB device number 3 using ehci-pci
[ 2.115101] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.200031] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.385422] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:046D:C05A.0003/input/input4
[ 2.385472] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.426729] Switched to clocksource tsc
[ 2.490018] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 2.502963] random: nonblocking pool is initialized
[ 2.721320] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 2.721454] systemd[1]: Detected architecture 'x86-64'.
[ 2.739429] systemd[1]: Set hostname to <arch>.
[ 3.632105] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.755410] systemd[1]: Starting Login Prompts.
[ 3.755928] systemd[1]: Reached target Login Prompts.
[ 3.755939] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.755992] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.756002] systemd[1]: Starting Remote File Systems.
[ 3.756478] systemd[1]: Reached target Remote File Systems.
[ 3.756488] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[ 3.756839] systemd[1]: Starting Encrypted Volumes.
[ 3.757313] systemd[1]: Reached target Encrypted Volumes.
[ 3.757330] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.757364] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.757373] systemd[1]: Starting Paths.
[ 3.757845] systemd[1]: Reached target Paths.
[ 3.757866] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.758419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.758432] systemd[1]: Starting Swap.
[ 3.758902] systemd[1]: Reached target Swap.
[ 3.758913] systemd[1]: Expecting device dev-disk-by\x2duuid-3e31eb5f\x2d326a\x2d4cd0\x2daab3\x2d7d1e7ac0797b.device...
[ 3.759249] systemd[1]: Starting Root Slice.
[ 3.766515] systemd[1]: Created slice Root Slice.
[ 3.766527] systemd[1]: Starting User and Session Slice.
[ 3.767173] systemd[1]: Created slice User and Session Slice.
[ 3.767184] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.767681] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.767691] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.768180] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.768189] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.768677] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.768687] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.769176] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.769189] systemd[1]: Starting udev Control Socket.
[ 3.769676] systemd[1]: Listening on udev Control Socket.
[ 3.769688] systemd[1]: Starting udev Kernel Socket.
[ 3.770181] systemd[1]: Listening on udev Kernel Socket.
[ 3.770192] systemd[1]: Starting Journal Socket.
[ 3.770700] systemd[1]: Listening on Journal Socket.
[ 3.770716] systemd[1]: Starting System Slice.
[ 3.771341] systemd[1]: Created slice System Slice.
[ 3.771357] systemd[1]: Started File System Check on Root Device.
[ 3.771365] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.772001] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.772011] systemd[1]: Mounting Temporary Directory...
[ 3.790231] systemd[1]: Starting system-netctl.slice.
[ 3.790914] systemd[1]: Created slice system-netctl.slice.
[ 3.790930] systemd[1]: Starting system-getty.slice.
[ 3.791567] systemd[1]: Created slice system-getty.slice.
[ 3.809849] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.852492] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.876658] systemd[1]: Starting Apply Kernel Variables...
[ 3.877416] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.878150] systemd[1]: Mounting Huge Pages File System...
[ 3.878884] systemd[1]: Starting udev Coldplug all Devices...
[ 3.879636] systemd[1]: Starting Setup Virtual Console...
[ 3.880782] systemd[1]: Started Load Kernel Modules.
[ 3.880820] systemd[1]: Mounting Configuration File System...
[ 3.881579] systemd[1]: Mounting Debug File System...
[ 3.882319] systemd[1]: Mounted FUSE Control File System.
[ 3.882346] systemd[1]: Starting Journal Service...
[ 3.883635] systemd[1]: Started Journal Service.
[ 4.312288] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 4.431925] systemd-udevd[146]: starting version 212
[ 5.513427] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 5.513433] ACPI: Power Button [PWRB]
[ 5.513493] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 5.513777] ACPI: Lid Switch [LID0]
[ 5.513831] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[ 5.513834] ACPI: Sleep Button [SLPB]
[ 5.513911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 5.513914] ACPI: Power Button [PWRF]
[ 5.596907] ACPI: AC Adapter [ACAD] (on-line)
[ 5.645033] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 5.657955] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.661096] acpi device:08: registered as cooling_device0
[ 5.663657] acpi device:0a: registered as cooling_device1
[ 5.663725] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input9
[ 5.708497] hp_accel: laptop model unknown, using default axes configuration
[ 5.720053] lis3lv02d: 8 bits sensor found
[ 5.729279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.791571] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[ 5.791574] ene_ir: PLL freq = 1406
[ 5.791575] ene_ir: KB3926C detected
[ 5.791586] ene_ir: Firmware regs: 00 00
[ 5.791587] ene_ir: Hardware features:
[ 5.791589] ene_ir: * Uses GPIO 40 for IR demodulated input
[ 5.821208] Monitor-Mwait will be used to enter C-1 state
[ 5.821217] Monitor-Mwait will be used to enter C-2 state
[ 5.821221] Monitor-Mwait will be used to enter C-3 state
[ 5.821225] tsc: Marking TSC unstable due to TSC halts in idle
[ 5.821242] ACPI: acpi_idle registered with cpuidle
[ 5.821270] Switched to clocksource hpet
[ 5.827916] Registered IR keymap rc-rc6-mce
[ 5.828003] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
[ 5.828066] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 5.840895] ene_ir: driver has been successfully loaded
[ 5.848018] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 5.877265] IR JVC protocol handler initialized
[ 5.878491] IR NEC protocol handler initialized
[ 5.879175] IR RC6 protocol handler initialized
[ 5.880281] IR RC5(x) protocol handler initialized
[ 5.880739] IR SANYO protocol handler initialized
[ 5.881059] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input12
[ 5.881065] IR MCE Keyboard/mouse protocol handler initialized
[ 5.881065] IR Sony protocol handler initialized
[ 5.881758] lirc_dev: IR Remote Control driver registered, major 249
[ 5.882267] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 5.882270] IR LIRC bridge handler initialized
[ 5.891466] [Firmware Bug]: Invalid critical threshold (0)
[ 5.892123] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.892126] ACPI: Thermal Zone [TZ01] (31 C)
[ 5.903447] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13
[ 5.903835] wmi: Mapper loaded
[ 5.927466] ACPI: Battery Slot [BAT0] (battery present)
[ 6.029419] [drm] Initialized drm 1.1.0 20060810
[ 6.114983] cfg80211: Calling CRDA to update world regulatory domain
[ 6.137776] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMBA) (20131218/utaddress-258)
[ 6.137785] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137789] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000050f (\GPIO) (20131218/utaddress-258)
[ 6.137793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137822] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.180252] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 6.180255] Copyright(c) 2003- 2014 Intel Corporation
[ 6.180475] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[ 6.287693] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.287960] r8169 0000:03:00.0: irq 49 for MSI/MSI-X
[ 6.288149] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc9000584a000, 00:00:00:00:00:00, XID 1c4000c0 IRQ 49
[ 6.288152] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.345229] mousedev: PS/2 mouse device common for all mice
[ 6.436120] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801f conflicts with OpRegion 0x0000000000008000-0x000000000000800f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[ 6.436128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.526671] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 6.535077] media: Linux media interface: v0.10
[ 6.569608] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 6.569745] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.570548] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.570639] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.570714] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.581760] input: PC Speaker as /devices/platform/pcspkr/input/input18
[ 6.599116] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 6.683172] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 6.683177] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 6.683179] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 6.683182] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 6.683232] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 6.701985] Linux video capture interface: v2.00
[ 6.780556] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.922833] nvidia: module license 'NVIDIA' taints kernel.
[ 6.922839] Disabling lock debugging due to kernel taint
[ 6.939605] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 6.939882] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 6.939892] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.12 Fri Apr 4 14:51:15 PDT 2014
[ 6.991292] iTCO_vendor_support: vendor-support=0
[ 6.991687] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.991726] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 6.991831] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.064547] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 7.066862] systemd-udevd[153]: renamed network interface eth0 to enp3s0
[ 7.089277] Bluetooth: Core ver 2.18
[ 7.089304] NET: Registered protocol family 31
[ 7.089306] Bluetooth: HCI device and connection manager initialized
[ 7.089316] Bluetooth: HCI socket layer initialized
[ 7.089319] Bluetooth: L2CAP socket layer initialized
[ 7.089331] Bluetooth: SCO socket layer initialized
[ 7.097641] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 7.119889] uvcvideo: Found UVC 1.00 device HP Webcam (05c8:010f)
[ 7.125560] usbcore: registered new interface driver btusb
[ 7.136432] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input20
[ 7.136523] usbcore: registered new interface driver uvcvideo
[ 7.136525] USB Video Class driver (1.1.1)
[ 7.162108] kvm: disabled by bios
[ 7.167498] systemd-udevd[149]: renamed network interface wlan0 to wlp2s0
[ 7.515656] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
[ 7.594362] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[ 7.949749] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.055002] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 13.835532] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.838466] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.935096] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.938046] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.964225] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.845976] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
[ 20.903153] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 20.906517] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 20.909113] wlp2s0: authenticated
[ 20.910074] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 20.913437] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 20.918955] wlp2s0: associated
[ 20.919008] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 21.089546] wlp2s0: deauthenticating from b8:c7:5d:02:3b:9d by local choice (reason=2)
[ 21.096263] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 21.099042] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 21.099780] cfg80211: Calling CRDA for country: AT
[ 21.101974] wlp2s0: authenticated
[ 21.103555] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 21.108457] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 21.115231] wlp2s0: associated
[ 26.591580] fuse init (API version 7.22)
[ 148.105211] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 148.107797] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 1/3)
[ 148.108518] cfg80211: Calling CRDA to update world regulatory domain
[ 148.310034] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 2/3)
[ 148.513366] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 3/3)
[ 148.514272] wlp2s0: authenticated
[ 148.516865] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 148.517652] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 148.519034] wlp2s0: associated
[ 148.531940] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 231.077026] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 231.080206] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 231.081422] cfg80211: Calling CRDA to update world regulatory domain
[ 231.082756] wlp2s0: authenticated
[ 231.083955] wlp2s0: waiting for beacon from b8:c7:5d:02:3b:9d
[ 231.362261] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 231.365917] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 1/3)
[ 231.380479] wlp2s0: authenticated
[ 231.383400] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 231.386425] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 231.390072] wlp2s0: associated
[ 231.481241] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 311.833862] perf samples too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 3074.285425] Watchdog[977]: segfault at 0 ip 00007f42693ed9b8 sp 00007f4251f777d0 error 6 in chromium[7f4265a4e000+55d7000]
[ 3166.859073] chromium[1212]: segfault at 39 ip 00007f7ddd6a7280 sp 00007fff9d984088 error 6 in chromium[7f7ddcefc000+55d7000]
[ 3172.385333] chromium[1169]: segfault at fbadbeef ip 00007f7ddf63345d sp 00007fff9d983f20 error 6 in chromium[7f7ddcefc000+55d7000]

Is Tracker included with Arch?

Hi all, just been playing with the beta version of Ubuntu 8 and I was wondering if tracker is included with Arch? I have tried to install it via pacman and it says it is installed, but I cannot see it under System > Preferences and none of the commands work as posted on their website. I believe this is a part of Gnome, I am using Gnome 2.22.
Cheers
EmyrB

ganlu wrote:pacman -Sf tracker-gnome-search-tool tracker
I issued that command and this is what I got: -
resolving dependencies...
looking for inter-conflicts...
Targets: tracker-0.6.6-1 tracker-gnome-search-tool-0.6.6-1
Total Download Size: 0.00 MB
Total Installed Size: 2.26 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/2) installing tracker [#####################] 100%
(2/2) installing tracker-gnome-search-tool [#####################] 100%
Optional packages for tracker-gnome-search-tool:
Tracker Deskbar module: 'deskbar-applet'
I am indebted to you ganlu
Now if I issue whereis trackerd, I get :-
trackerd: /usr/bin/trackerd /usr/share/man/man1/trackerd.1.gz
Which is cool.
Now I also installed the deskbar-applet as suggested by tracker, I downloaded it, but how do I run it and how do I add it to the applet manager for Gnome?
Also, when I run tracker I get the following: -
(tracker-search-tool:3347): GnomeUI-WARNING **: While connecting to session manager:
Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed.
** (tracker-search-tool:3347): WARNING **: Unable to connect to dbus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
** (tracker-search-tool:3347): WARNING **: Unable to connect to dbus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Is this something to worry about?
Cheers
EmyrB

Gnome menu's with arch

i know that the menus are one of gnomes few downfalls, because i see lots of posts about them everywhere, but i wanted to try here with a couple of questions.
first off, and i kinda doubt this, is there some magical way to just populate the menus. ive never actually used debian, but someone told me when you apt-get something, it just pops in the menu's in gnome and kde. is there anyway to have that happen with arch. and is there some magical script that will just run through normal directories and find stuff and put it in the menus?
beyond that, stuff that is already in the menu seems to have some magical lock with the icons. if i change my icon theme, i know the gaim in my menu will get that icon, but if i manuallly add gaim, it will not. what is the trick to that, i thought it might somehow be related to what i was asking above.
thanks!

It is actually pretty easy, but very undocumented for the most part. Open up Nautilus and go to this url: applications:/// and then you can just right click and create new launcher to add a new application. It is pretty straightforward to do other things, you just right click properties to change those icons and what they point to and such. Most gnome programs in arch install themselves to the gnome menus automatically in Gnome 2.4.
Kritoke

Dsl with Arch

Ok, ive hunted for quite a while on this issue and people dont seem to have the answers. This is what I'd like to know...
I keep getting a timeout on trying adsl-start and the same values work on winfroze on the same box.
for setting up a straight direct dsl connection (no router):
(rp-ppoe is installed already and ethernet card is built into the kernel)
1 - how do I need to set up an rc.conf?
2 - what needs to be enabled in a custom kernel (2.6.7)?
I've tried creating an empty /etc/ppp/ppp.conf based on another post on this forum but im not sure this is correct.
anything else that would be needed?
Setting this up has been one of the biggest nightmares in all of my linux experience, it would be great to resolve it.
It has happened on two separate boxes using two separtate dsl providers - when I bring those boxes to a dhcp system at my place, everything works fine so it's definitely not hardware.
If im not asking the right questions here, please let me know. I need to get this sorted out.

Firstly, thanks very much for your response, but if only it was that easy.
it wont start and all of those thing have been done (except the adsl-stop which is not needed because it tries to start up at boot and wont)
if you are using a custom kernel, you dont need to make sure anything is enabled for ppp and such?
<*> PPP (point-to-point protocol) support x x
x x [ ] PPP multilink support (EXPERIMENTAL) (NEW) x x
x x [ ] PPP filtering (NEW) x x
x x <*> PPP support for async serial ports (NEW) x x
x x <*> PPP support for sync tty ports (NEW) x x
x x < > PPP Deflate compression (NEW) x x
x x < > PPP BSD-Compress compression (NEW) x x
x x <*> PPP over Ethernet (EXPERIMENTAL) (NEW)
above is what I usually enable. If not then maybe that could be a conflict? Although I do recall trying *numerous* combinations at a different location and it working, but having very sporadic results - sometimes it would work on boot, sometimes not and it would also cause qt based apps to freeze when using the keyboard on them (weird but true).
I know his service can work because all I do with a live cd is use the adsl configuration tool and it works fine (knoppix). I know the ethernet card works because it works fine on cable/dhcp.
Any other ideas?
This is so frustrating, im halfway between losing my mind and just buying this guy a router if I cant solve this. The trouble is, there are other systems out there that I tech that are having similar issues and I would really like to get this fixed so I can stick with Arch for these people.

[SOLVED] Not sure what to do with passwd.pacnew

Hey, I have just encountered my first .pacnew file and am not sure what to do with it. I have read the wiki, but I know a lot of this has to be left up to the user, and I don't think I'm educated enough on this to solve it on my own. The passwd file looks like this:
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
mail:x:8:12:mail:/var/spool/mail:/bin/false
ftp:x:14:11:ftp:/srv/ftp:/bin/false
http:x:33:33:http:/srv/http:/bin/false
uuidd:x:68:68:uuidd:/:/sbin/nologin
dbus:x:81:81:dbus:/:/sbin/nologin
nobody:x:99:99:nobody:/:/bin/false
polkitd:x:102:102:Policy Kit Daemon:/:/bin/false
avahi:x:84:84:avahi:/:/bin/false
mysql:x:89:89::/var/lib/mysql:/bin/false
kdm:x:135:135::/var/lib/kdm:/bin/false
johnathan:x:1000:100::/home/johnathan:/bin/bash
git:x:999:999:git daemon user:/:/bin/bash
systemd-journal-gateway:x:191:191::/:/usr/bin/nologin
systemd-timesync:x:192:192::/:/usr/bin/nologin
and the passwd.pacnew file looks like this:
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
mail:x:8:12:mail:/var/spool/mail:/bin/false
ftp:x:14:11:ftp:/srv/ftp:/bin/false
http:x:33:33:http:/srv/http:/bin/false
uuidd:x:68:68:uuidd:/:/sbin/nologin
dbus:x:81:81:dbus:/:/sbin/nologin
nobody:x:99:99:nobody:/:/bin/false
systemd-journal-gateway:x:191:191:systemd-journal-gateway:/:/bin/false
systemd-timesync:x:192:192:systemd-timesync:/:/bin/false
As you can see, there are quite different, including missing lines in the .pacnew file and a change from polkitd and avahi to systemd. Could anyone tell me what is safe to merge?
Thanks for your help!
Last edited by SteampunkWhooves (2014-05-29 22:28:40)

jasonwryan wrote:
There is a change in the .pacnew...
systemd-journal-gateway:x:191:191:systemd-journal-gateway:/:/bin/false
systemd-timesync:x:192:192:systemd-timesync:/:/bin/false
You should use vimdiff, or a similar tool, to identify any updates to the files that you may want to pull into your current config.
I think such changes should also be announced on Arch News / RSS
i.e. https://www.archlinux.org/news/
So that users know that there are lines to be imported. (Atleast for filesystem package if not other packages)
EDIT:
I notice that those two users are already there in my system (in both passwd and shadow). So somewhere update already added those users. That is why possibly there was no announcement on Arch News.
But those new users are NOT in *new* shadow. IS IT A BUG? i.e. if users are in passwd, they should in shadow as well right?
Last edited by amish (2014-06-07 06:16:52)

Thinking about staying with Arch...

I've been reading the bbs lately and it seems that it's fashionable to post all these "I'm leaving" threads, so I figured I'd post one... cuz I mean... I wanna be cool too. I hope I got enough 'you should care' in the title. Anyhow, the usual progression of these posts is to go into some mindless demands and useless babbling about my own incompetence as a human being, so naturally I'll follow suit.
So, I plan on staying with Arch unless:
- People stop posting "i'm leaving" threads. They make excellent bathroom reading, and I'm afraid I just can't continue to use Arch if I run out of things to read on the crapper. I really like Arch, but Ubuntu has a plethora of whiny "i'm leaving threads" that could easily satisfy my bathroom needs, but I really like Arch so I'd rather not resort to that.
- People find the forum search button. If people found that, there wouldn't be nearly as much mindless repetative content to read around here, and that'd just make things boring as heck. I'm afraid if I was bored by original content instead of the repetative kind, I just couldn't stand to stick around. I really hope people never find that button, I really like Arch, I'd hate to leave.
- I ever contribute anything useful. I'm afraid I just wouldn't fit in with this community anymore if I started trying to solve problems for myself and contributing useful ideas and code or documentation. If that ever happened, I think I'd have to go elsewhere.
- People stop assuming others will do work for them. It's a simple fact that in any good community, everyone but me should be doing all my work, and the people spending hours of their free time to provide me with software that is distributed "in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." should be held strictly responsible for every one of my problems and feature requests, as well as any other random demands I might have.
Anyhow, those are my reasons I might be staying with Arch. I think it's really important that everyone reads them and feels sorry for me.

You fool!
Let me address some of your so called issues!
By some, I mean all..
By issues, I mean..issues.
neotuli wrote:- People stop posting "i'm leaving" threads. They make excellent bathroom reading, and I'm afraid I just can't continue to use Arch if I run out of things to read on the crapper. I really like Arch, but Ubuntu has a plethora of whiny "i'm leaving threads" that could easily satisfy my bathroom needs, but I really like Arch so I'd rather not resort to that.
This will never happen. People will always provide good bathroom reading material, If not, I was told by someone at work the other day that, "the internet has books." This was quite the revelation, but it has proven to be true so far.
- People find the forum search button. If people found that, there wouldn't be nearly as much mindless repetative content to read around here, and that'd just make things boring as heck. I'm afraid if I was bored by original content instead of the repetative kind, I just couldn't stand to stick around. I really hope people never find that button, I really like Arch, I'd hate to leave.
This will never happen. The search button has been strategically hidden for a while now. Every day we make the font just a little bit smaller, in the hopes that nobody notices, and we can just make the search link disappear altogether.
- I ever contribute anything useful. I'm afraid I just wouldn't fit in with this community anymore if I started trying to solve problems for myself and contributing useful ideas and code or documentation. If that ever happened, I think I'd have to go elsewhere.
This will never happen. Wait..it might.. but... no.
It cannot be allowed. Who would be stupid enough to do work for free?!
- People stop assuming others will do work for them. It's a simple fact that in any good community, everyone but me should be doing all my work, and the people spending hours of their free time to provide me with software that is distributed "in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." should be held strictly responsible for every one of my problems and feature requests, as well as any other random demands I might have.
Somehow this ties into the previous bullet point. Somehow.
Like.. the other day I was walking down the street, and someone asked me for a smoke. I don't smoke. I should have went to the store and got him a pack of smokes, walked back, and gave him one. I should know better..I should always carry around a carton of cigarettes just in case someone needs me to give them one.
Anyhow, those are my reasons I might be staying with Arch. I think it's really important that everyone reads them and feels sorry for me.
I certainly did. In fact, now I question everything!
- The nature of the universe! Is it there?
- Should grub have a colored background, or a should it be blank. I am thinking blank... I don't want to know what is being said there.. where is the mystery left in life!?!?
- pants. The internet doesn't require them.. why do stores?
Summary: You daft sack of hammers. If you don't not not dislike arch, then you shouldn't don't not go use a different distro!

Have you tried a Unicomp 122-key KBD with Arch?

The keyboard description is here: http://pckeyboards.stores.yahoo.net/122keyterkey.html
I'm considering the PC/5270 version, since according to the site it accepts "normal" PC keycodes, and if I'm understanding what I read in the Arch Wiki it should be little trouble to get it set up to suit me. Has anyone tried it? I'm not a gamer, so that isn't a factor for me.
Due to severe arthritis (RA) my fingers are stiff and a little jerky at times and I make a lot of false/wrong keystrokes with a modern soft-touch KBD - Ctrl/Alt/Shift combinations are especially difficult at times. I tried an old IBM Model M and it really helps, but the used one I found is a little glitchy due to age as was the one before it. I want to buy a brand new buckling-switch "clicky" KBD and was browing the Unicomp site when their 122-key version caught my eye. I've spent some time with the IBM version in the past and I really liked it. If I can get a new Unicomp to work well with Arch, I'll be elated, but I don't want to buy yet another keyboard I don't like or can't fully utilize.
Thank you for any light you can shed on the topic.
edited to add - I'm running 64-bit Arch, I don't think it matters but it might.
Last edited by Bob-Hur (2007-12-25 01:17:08)

I've handled/owned quite a few myself, but this one has a bad downarrow key and a few more keys that have intermittent problems. The box is a new Lenovo with good tight clean PS/2 plug receptacles so I'm not losing any connection integrity from jury-rigging adaptors ... I'm guessing it's the keyboard. It also turned out to be a "soft touch" instead of "buckling spring" kbd when it got here from the eBay seller and it would cost more than the refund I'd get to send it back. Some days you eat the bear, some days the bear eats you.
Ahhhh, no worries, I found a nice 1995 IBM Model M 82G2383 brand NEW in the original box from clickykeyboardss.com, it was $80 but it will likely outlast me. It doesn't have all those neato extra keys, but it's a bit cheaper, and it's a real IBM. Shame he didn't have any left in black ...
Thanks for the comments, and a Merry Christmas to all!

What is it with Arch?

Similar Messages

Maybe you are looking for