What is Max number of schema in a single DB ?

Hi All,
I have small query does anyone have any idea about
What is Max number of schema in a single DB we can specify in oracle ?
Thanks n advance.
Anwar

You don't say which version of the database you are using. In 10gR2 the maximum limit on users and roles is 2,147,483,638.
I think this is more users than any sensible DBA would want to manager :)
Cheers, APC

Similar Messages

What is max number of bits supported by the 2nd argument of DAQmxCreateDOChan()?

The example file WriteDigChan.c is very helpful, but it only handles 8-bits. I need 16 output bits. In that example, could I simply change the second argument from "Dev1/port0/line0:7" to "Dev1/port0/line0:15"? Or is each port limited to 8-bits?

Hello JoeCz,
Thank you for using NI forums. The number of bits for each port is device specific, but most devices do have 8 bits for each port. One thing you can try is to specify multiple ports i.e. "Dev1/port0/line0:7, Dev1/port1/line0:7". You can then create an 8 bit array with two elements (1 element for each port) and specify the values you would like written for each line. Try this out and let me know how it works for you.
Regards,

What is maximum number of addressees in a single message

I want to send a message to a large group of people.
To how many people at once can I send my message

Read section 'E-mail addresses':
* http://kb.mozillazine.org/Limits_%28Thunderbird%29
When sending one email to a large number of email addresses, it is better to create a 'Mailing list'.
* http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List#Create_a_new_mailing_list
* click on 'Address book'
Create a mailing list which will look like a sub list to an address book.
The email addresses need to be in the top level address book and the contact must have a valid email adress.
* File > New > Mailing List
* under 'Add to:' choose the main Address Book
* under 'List Name' - give it a name.
In my example shown in attached images, I called it 'Test'.
you could enter the email addresses one by one in the list area, but there is a much quicker way.
* Click on OK to close window and create the Mailing List.
Now to add the email addresses.
* select the main address book
* highlight all the contacts you want in the Mailing List.
* then left click and hold down and drag the contacts into the list which is a sub list to that address book.
see first image. Personal Address Book is the top level address book and Test is the Mailing List.
Then you aready to use the Mailing List.
There are two methods, choose whichever method is best for the situation.
Method 1:
* Open a new Write message.
* Make sure the Contact Sidebar is visible
* View > Contact Sidebar
* Select the top level address book
* Look in the list of contacts for the Mailing List name.
* Select and click on 'Addto Bcc' or other option.
see second image.
It will enter the name of the Mailing List - not the individual names.
You cannot edit the list via this method.
If you really want to see all the indiviual names, so that you can edit the list then you need to use a slightly different method.
Method 2:
* In Address Book
* Select the Mailing List.
* Click on 'Write'
This will enter each individual name in it's own TO field.
At this point you can choose to change the TO option to Bcc, but it is a bit long winded, which is why I showed you the first option to enter the whole list as Bcc. You can also edit the list - maybe to remove someone.
Remember, which ever method you use, it is always a good idea to include at least one name in a TO field. such as your own email address if you do not want to disclose all your contacts email addresses. Some servers can think it may be spam if there is nothing in a TO field.

Max number of caracters in subtitles in Encore? Trying to avoid "Subtitle too complex to render"

Does anyone know what the max number of caracters in a single Encore subtitle "string" is if you want to avoid the "Subtitle too complex to render" error message?
I have a project with one subtitle layer, concisting of 483 "subtitle strings" in it and i'm getting the "...too complex..." message when rendering.
But instead of spending endless hours of trying to guess which one(s) cause the problem, i'd love to have an answer like "Don't ever tap in more than XX caracters in a single subtitle"
And now we are at it:
I'm let to believe that the distance between the individual "subtitle strings" also can release the "...too complex..." message. Any clues as to what the minimum number of frames has to be between the individual "strings" in order to avoid the error message (the project in question is a "classic" DVD-project - not BluRay)?
Thanx in advance.

Well, just in case anyone else is stuck with the same problem and comes across this old string: After several tests I have come up with this solution that works for me - and perhaps for others too:
Notice that the subtitle borders are set differently than the default settings. The settings I use keeps the subtitle string just inside the outer safe area border where as the default settings are inside the inner safe area border and thus resulting in shorter subtitle lines.
You can choose a different typeface and size if you like. These matters doesn't seem to have much influence on the "_too complex_" issue.
With these settings I can write a maximum of 60 characters, including spaces, per line. Remember to make forced line breaks between the lines, if your subtitle string is longer than one line. Otherwise Encore will see what appears to be two lines as one long line exceeding the max number of characters and thus resulting in a "_too complex_" error.
And as for number of frames between subtitle strings: Minimum 5 frames - but Encore will automaticly warn you if you place text strings closer than that.

Max number of bits in a int

what the max number of bits you can have in a integer????
thanks,
kelvin

thanks for some daft reason i thought it was 8, yet another school boy error.
thanks,
kelvin

Max number of characters in a Disco Calculation

Anyone know what the max number of characters in a Disco Calculation and any other limitations that exist
Thanks

I've never hit one and I've done some pretty big calculations (ie: CASE with lots of options). Whatever it is - if there is one - it must be pretty big.
Russ

TXT Message, Max Number of Contacts??

Hi
When sending a txt message, whats the max number of contacts u can send a message to? Since I've updates to iOS 4.1, I can only TXT 8 contacts at once.
Baz

Hi
My iPhone 4 isn't Jailbroken and has iOS 4.1 installed. Since my original post I've had a play about. This is exactly what happens:
1. I receive a txt message.
2. Select edit and the forward.
3. The To field is blank with the + symbol on the right.
4. I start to select the contacts I want to forward the txt to.
5. I get to ten contacts and the + symbol disappears
6. To add further contacts I touch the field where the txt is.
7. I touch the To field again.
8. The + symbol reappears and I can then start to add further contacts.
Is this normal?
Thanks
Baz
Message was edited by: BarryMcKelvey

HT204053 Max number of devices on one iTunes account?

Max number of Devices on a single iTunes account

Devices or Computers? The former there is no limit. For the latter there is a limit of 5.

What is the max number of hyperlinks supported in a PDF docment?

What is the max number of hyperlinks supported in a PDF docment?
How do I find out how many hyperlinks there are in a PDF document?

I don't think there's a limit to the number of links you can add to a file...
This code (taken from the reference files) will report the number of links in your file:
var numLinks=0;
for ( var p = 0; p < this.numPages; p++)
var b = this.getPageBox("Crop", p);
var l = this.getLinks(p, b);
console.println("Number of Links on page " + p +" is " + l.length);
numLinks += l.length;
console.println("Number of Links in Document is " + numLinks);

In Oracle 10g, what is the max number of values we can pass to 'IN' Clause

Hi,
In my SQL query i have a scenario like, i have to pass the values to 'IN' Clause dynamically from other application. I want to know what is the the max number of values i can pass to 'IN' Clause.
i have searched in many pages i seeing answers like 'may be 1000' , 'not sure'....
Could any one tell me the exact limit of IN Clause in 10g.
Thanks in Advance.
Chandran

Hi, Chandran,
Chandran M wrote:
In my SQL query i have a scenario like, i have to pass the values to 'IN' Clause dynamically from other application. I want to know what is the the max number of values i can pass to 'IN' Clause.
i have searched in many pages i seeing answers like 'may be 1000' , 'not sure'....Don't overlook [Dont want to know|http://forums.oracle.com/forums/thread.jspa?messageID=2683385&#2683385]. This may explain why people are reluctant to give a straight answer.
Could any one tell me the exact limit of IN Clause in 10g.1000 items such as IN (1, 2, 3, ..., 1000)
No limit on the number of sets: IN ((1), (2), (3), ...) *<=== NOT QUITE!* See below
No limit in sub-queries: IN (SELECT ...)
Edited by: Frank Kulash on Jun 3, 2009 9:43 AM
The limit of 1000 applies to sets of single items: (x) IN ((1), (2), (3), ...)
There is no limit if the sets contain two or more items: (x, 0) IN ((1,0), (2,0), (3,0), ...)
Thanks to Michaels for pointing this out.
Edited by: Frank Kulash on Jun 3, 2009 10:22 AM
Fixed link

What's the max number of columns a table can have on 32 bit OS & 64 bit OS

What is the max number of columns a table can have on 32 bit OS & 64 bit OS ?
Edited by: sameer naik on 02-Jul-2010 02:11

For TimesTen 7.0 and 11.2.1 releases the limit on the number of columns per table is 1000 for both 32 and 64 bit TimesTen. This can be found in the documentation under System Limits.
Regards,
Chris

What is the Max Number of Total Work Process that we can Have on One C.I

Hi,
What is the Max Number of Total Work Process that we can have on a Single C.I
Is there any Limit that We can only have Perticular Number of Total work process ?
Or it is just Unlimited number of total work process
Thanks & Regards
Dan.

from the system throughput point of view a rule of a thumb is:
1 up to 4 sometimes 5 workprocesses per CPU.
(one is used in Benchmarks where you have a very small number of transactions running with a small amount of database accesses)
you can easily find it out:
configure 4 WPs per CPU. If you have a number of WP's consuming nearly no CPU time you can reduce the number of WPs.
regards
Peter

What's the max number of E1 on 3845 and max number of E3 ports ?

kindly support me witjh the refrences that provide max number of E1's on 3845 and number of E3?

“Thank you for your question. This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product. Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.”

When i try to sign in icloud with different id it says max number of free accounts reached for this device what shall i do

PLease help me.....i wanna sign in icloud with different account but it says max number of free acconts reached

Somehow your Apple ID/iCloud account has been used on multiple iOS devices and exceeded the maximum. We have no way of knowing which devices. We are users like you on this forum.

Max number of chars in process message MSEL?

Hi, what is the max number of characteristics can be used in process message category's MSEL table? Right now, I am using more than 99 characteristics and I get a short dump DYNPRO_FIELD_CONVERSION. Is it really limited to 99 characteristics and if it is true, is there an OSS note to change it to allow more than 99?
Thanks and points available

Please make sure that you build a
multithreaded program first (check with ldd).
If anyone can tell me the maximum number of threads per process I would
really appreicate it.
Also the maximum number of open files per process. It depends on the architecture (x86/SPARC), OS version,
64 or 32-bit, /etc/system, shell limitations (/usr/bin/ulimit) ...
Search for "rlim_fd_max / rlim_fd_cur" on docs.sun.com too.
HTH,
-vladimir

What is Max number of schema in a single DB ?

Similar Messages

Maybe you are looking for