WHAT IS MAX RAM IN THE SYSTEM

i was wondering off hand what is the MAX. RAM that my lenovo 9690 02u ,( 2 slot ram setup ), can handle . i have 2 gigs right now .

you have the 3000 J200 system. The system can support 2 gigs per ram slot, so 2 x 2 gigs = 4 gigs max.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Can a 2008 mac book 4.1 use a ssd? Also what is max RAM upgr?

Can a 2008 mac book 4.1 use a SSD? Also what is max RAM upgrade possible beyond 4GB?

Does it matter on the SATA II or III, for the bus?

What does this mean? What should I do? The system extension "//System/Library/Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

What does this mean? What should I do?
The system extension “//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.

You don't even have to type more than 8 letters:

What type of ram does the MacBook Pro 15" use?

What type of ram does the MacBook Pro 15" use? Is it the same as the 13"?

13 and 15-inch MacBooks Pro use the same RAM type, but it depends on the model. See > http://support.apple.com/kb/ht1270

What do you do when the system crashes ?

hi experts,
i want answers for the following questions..
1.What do you do when the system crashes in the middle of a BDC batch
session?
2.What do you do with errors in BDC batch sessions? and how to proceed further..
with regards ,
James...
valuable answers will be rewarded...

HI,
There are two ways to tackle this issue.
<b>Method..1</b>
Thru se16 check the table(s) being updated, preferably the last table as per your code. If you have say 1600 records in the flat file check for the upload of the 1600 th record.. If not ok, check for the upload of the 800 th record(N-N/2), if OK go & check
N+(N/2) th record if not ok goto N-(N/2) th record where N is the curent record number in the flat file . In about 4 or five checks you will converge on the last uploaded record.
Now from the flat file, remove the lines till the upload is ok & then re-run BDC.
Even here a record may be uploaded partially which has to be manually edited thru se16.
<b>Method..2</b>
Have a zee table for uploads. Just after uploading a record into the sap table, fill this zeetable with few fields of each the records. In an abort situation this table will tell the story of the update status. Take care to empty this table occasionally.
Regards
Gaurav

HP G60t-500 notebook Win7 64bit - what is max ram?

Product Name HP G60
Product Number: VD896AV
Serial Number: 2CE94894JX
T6600 @2.2GHz
Graphics: Mobile Intel 4 Series Express Chipset Family
System Board: 3612 09.66
System Bios: F.53

Your link is for a G62t -- I have a G60t. It's not even the same kind of ram. The G62t uses DDR3 and mine uses DDR2.
The reason I'm asking here on the HP forum is so that I can get an official response. In this earler model of the G60t the model was sold as max 4GB but actually could take 8 if the OS supported it. I'm trying to find out if mine is the same.
http://h30434.www3.hp.com/t5/Notebook-Hardware/G60t-maximum-RAM/m-p/184322

Hp pavilion Dv7-4143ea what is max RAM

What is maximum RAM I can install8 or 16?
Can I fit an SSD (1gb)

Hi,
1. Max RAM: It supports up to 8GB:
http://support.hp.com/sg-en/document/c02680687
2. Yes, you can use 1TB SSD. They are very cheap now, only around 40 cents/GB
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

What does it mean if the system "cannot find driver for console framebuffer"?

I've just installed Solaris 7 on a SparcStation 20 with 256 MB RAM, 1 + 2 GB hard drives, 1xSuperSparcII. When I boot up it says "NOTICE:Cannot find driver for console framebuffer". I can't run the CDE, and I assume this is because there is no graphics driver. The graphics card (it's an add-on but by Sun) presumably needs a driver and I would have thought that this would have been included with the Solaris 7 CD. The whole thing worked fine when it was running Solaris 2.5.1 and now I've installed a new OS (initial as opposed to upgrade) it just don't work. Any ideas?

The "output-device" parameter may not be set properly in Open Boot Prom(OBP) and hence during installation, the driver may not be installed. To fix this, try the following steps.
1. Note down the current value for output-device. This value is to be restored later.
printenv output-device
2. Set the "output-device" parameter to "screen" in OBP
setenv output-device screen
3. Perform a reconfiguration boot using the command "boot -r"
4. The error will not appear. Verify that /dev/fb refers to a device link.
5. Go to ok prompt again and restore the output-device to its original value (as noted in step 1). The reason for doing this is that some resolution parameters would have been set earlier for your output-device.
6. Reboot the system again. The error may appear again but since the device link is already created, the CDE will work.
Please contact us if there are any issues.
Thanks
Srinivasan

G4 700mHz What is max RAM? Can I go over 1GB?

I upgraded the RAM to what the factory says is the max - 1 GB. But after installing Tiger the machine is very slow. If I put a 1GB chip in the factory slot will the machine recognize it?
I did do a search for the answer before posting and mainly say references to the 1Ghz machines.

Hey,
I don't believe there are any 1GB RAM modules than will fit in this model of iMac, (144-pin PC133). So 1GB will be the max. (2 x 512mb)
Hope this helps

E-Recruitment - How do I determine what an activity does in the system?

Can anyone shed some light on how to determine information on activities? Example like 0010 Check Suitability etc. Any docs anywhere? Thanks

What an Activity does depends on how you categorize it in the IMG. For example 0010 Check Suitability is a Simple Activity. Heres a brief explanation of how some of the Activity Categories work.
Simple Activity
This is like a simple checklist. There is no system functionality behind it. Once the activity is done you mark it as complete.
Qualifying Event
These are similar to Simple Activities. There is no functionality for these activities alone, but in completing these activities, like a Job Interview, you complete fields that can be used in an invitation to the event.
Simple Correspondence
A letter form (SmartForm) is assigned to activity types of this category. These activity types enable letters to be sent via the Internet, to be printed by an R/3 system, or to be edited locally at the front end.
Invitation
A letter form (SmartForm) is also assigned to activity types of this category. In addition, the activity types always refer to a qualifying event that is open for invitation. It uses information in the Qualifying Event (time & location) to complete the invitation. The documents can be processed in the same way as simple correspondence.
Status Change
Activity types of this category change the status of the associated object. You can define the new status per activity type and per object type. Status changes also initiate Workflow
Questionnaire
Questionnaire can be assigned to activity types in this category. These activity types enable questionnaires to be sent to candidates using the Internet or to be included in the application wizard through a Process Template.
I found the documentation in the IMG to be quite helpful in this area. I hope this helps.
John

What can I to run the system only with DAC card +accessories + lookout software

That configuration for speed up and simplifing of system.

Are you asking about NI's DAQ hardware and Lookout? The only way Lookout talks to DAQ hardware is via OPC. So, you'll have to use the DAQOPCServer for this. The speeds will obviously not be the same as when using DAQ VIs directly.
Hope this helps. Please provide more details if you have any more questions in this regard.
Khalid

What is max RAM for 845PE board.

My question is really what is the maximum DIMM slot useage. I am getting a MSI 845PE Max2-FIR board. It looks like I didn't read the fine print. Although there are three DIMM slots, only two can accept a double sided DDR memory , for a maximum total of 4 DIMM banks being used. Is this correct?
So, my three 256MB sticks will be down to only two??
Thanks. The move away from the VIA chip will be worth the inconvience.
)

Yes, only 4 banks at a time meaning no more than 2 double sided sticks.
Upto 2GB in total.

Ibook late 04 max ram?

i need to update,white 14.?" ibook g4/ 2.1mhz late 04 what is max ram? Will pc3200 work or pc2700, it calls for pc2100.
Thanx,
Dan

daniel schafer wrote:
i need to update,white 14.?" ibook g4/ 2.1mhz late 04 what is max ram?
This depends on the exact model. (There is no such thing as a 2.1 mhz iBook.) If it's the Late 2004 model (as stated):
http://www.everymac.com/systems/apple/ibook/stats/ibook_g4_1.33_14.html
then the maximum RAM is 1.25 GB, accomplished by adding a 1 GB module in the one user-accessible RAM slot.
http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=200

Inactive memory. it's not working properly, how do i tweak the system to fix it?

hi.
my system has 24 gigabytes of ram. I use After effects and photoshop and illustrator... all day, every day, going back over 10 years.
when I run a particularly big project in AE, one that uses big fies, or a lot of files, the inactive ram very quickly balloons out of control.
prime example: I am rendering right now, it takes about 12 minutes to render the comp, in 12 minutes the system will go from zero megabytes of inactive ram, to 17 gigabytes, leaving me with no ram for the system, causing in some severe cases: actual hard crashes. I continually have to monitor and run a "purge" command in the terminal in order to cut that out.
the documentation and general discourse I've read agrees that inactive memory is the same thing as free memory, in that it is available for applications with need to use it. But, it contains potentially useful data that was recently used, and the system would rather give you the free stuff before giving you the inactive stuff.
here's the problem:
Aftereffects uses this memory, and then frees it. it's full of gibberish, it gets used quickly, and released quickly, and pooled into inactive memory. At this point it should be availible for other apps to use, and it isn't. it is treated as if it is in use. The system can't use it, aftereffects can't use it, no other app can get this ram allocated to it. Inactive memory, becomes terminal memory, memory that is not available for use by the system.
I know there has to be a system default or a setting in the terminal, I can set to make it trigger happy and automatically free up this useless memory.
what is it?

Inactive memory is the operating system cache.
This cache may contains data which has not been written to disk (called dirty pages). This is because Mac OS X defers flushing dirty cache data to disk to cut down on contantly starting up idle disks, consuming power, draining laptop batteries, and adding extra wear to solid state disks which have a limited number of writes.
When Mac OS X has lots of inactive memory and the system starts to slow down, this is because now the OS is being forced to write the dirty cached pages to disk before it can give those pages to another applications, or to reuse those pages with the same applciation.
After effects and photoshop and illustrator are very memory intensive apps.
...causing in some severe cases: actual hard crashes.
That is either a hardware problem, or an operating system bug. You should file a Bug report including your crash dumps to Apple.
BugReporter
<http://bugreporter.apple.com>
Free ADC (Apple Developer Connection) account needed for BugReporter.
Anyone can get a free account at:
<http://developer.apple.com/programs/register/>
Aftereffects uses this memory, and then frees it. it's full of gibberish, it gets used quickly, and released quickly, and pooled into inactive memory. At this point it should be availible for other apps to use, and it isn't. it is treated as if it is in use. The system can't use it, aftereffects can't use it, no other app can get this ram allocated to it. Inactive memory, becomes terminal memory, memory that is not available for use by the system.
The inactive memory may still be part of the After Effects address space, just not in the current process working set. That is to say, ever so often the operating system will mark pages inactive and see if the process references them again. If it does, they are put back in the process' working set (quickly because they are still in RAM and it just requies updating some process tables), otherwise they sit in inactive memory. If they are really part of After Effects address space, then chances are the data in those pages is dirty, and before they can be given to another process the pages have to be written to the /var/vm/swapfile(s).
If After Effects generated this inactive memory by reading files (and only reading), then those pages are clean (not dirty), and can easily be moved to free pages and given to a process as there is no need to write them back to disk, as the disk has the same values as what is cached.
If After Effects generated this inactive memory by writing data to files, then the pages are dirty and are waiting to be written to disk. Unless the file has been deleted after the write (such as a scratch file), then the operating system must write the data to disk before it can reuse the inactive pages. It does not matter if later the file will be deleted, the operating system does not know that, so it cannot give those pages to another process until they have been written to disk. The except being if and only if, a process is also accessing (reading or writing) that file, then cache starts to pay for itself.
The operating system does not refuse to give inactive memory to other processes, it just has responsibilities to make sure dirty pages are properly moved to stable storage before the pages are reused. And generally speaking stable storage is slow. Orders of magnitude slower.
If you want to control when you the operating system cleans dirty inactive memory, then you may continue to run the 'purge' command. As long as you are not running it non-stop, and especially if you are using a laptop or solid state disk.
Then again, getting more RAM will allow the operating system to dirty up more RAM before it needs to start flushing to disk. And replacing your disks with solid state disks (SSDs) will allow the operating system to flush dirty pages much faster when it needs to start cleaning the inactive memory.
Message was edited by: BobHarris

How does the System.in.read() works?

Hi!I'm trying to read some chars from the console.So here is my code of reading the two chars:
       char ch1='\u0000';
       char ch2='\u0000';
       System.out.print("Enter the first char:");
       ch1=(char)System.in.read();
       System.in.read();
       System.out.print("Enter the second char:");
       ch2=(char)System.in.read();
       System.out.println("You have typed the following letters:"+ch1+" , "+ch2);My problem is that if I don't add the System.in.read(); line after reading the first char i wont be able to read the second.But I saw on a code on the net that they put it.So I've put it too but don't understand what it does.I mean the System.in.read(); function reads until it gets -1.But in my case it's gonna get '\n'.So how does this function works?Thank you!
Edited by: jcoder86 on Oct 9, 2009 5:36 AM

jcoder86 wrote:
Hi!I'm trying to read some chars from the console.So here is my code of reading the two chars:
char ch1='\u0000';
char ch2='\u0000';
System.out.print("Enter the first char:");
ch1=(char)System.in.read();
System.in.read();
System.out.print("Enter the second char:");
ch2=(char)System.in.read();
System.out.println("You have typed the following letters:"+ch1+" , "+ch2);My problem is that if I don't add the System.in.read(); line after reading the first char i wont be able to read the second.But I saw on a code on the net that they put it.So I've put it too but don't understand what it does.I mean the System.in.read(); function reads until it gets -1.But in my case it's gonna get '\n'.So how does this function works?Thank you!
Edited by: jcoder86 on Oct 9, 2009 5:36 AMThat's wrong. System.in.read() reads a byte from the stream. -1 is returned if the end of stream has been reached (that usually doesn't happen if you read from stdin)
The second System.in.read() is there to throw away the line terminator.

WHAT IS MAX RAM IN THE SYSTEM

Similar Messages

Maybe you are looking for