What is posted availability specification for Windows server 2012? 2012R2?
I am trying to put together a high availability solution and I want to know what the availability 'claim' of the individual components would be. What is the availability specification for Windows server 2012 and Windows Server 2012R2?(for example 99.9%
availability for the O/S itself). This would be in a non clustered or Load Balanced state. Just a single server running the O/S.
Hi,
SLA requirements determine how components such as storage, clustering, and backup and recovery factor into your organization.The term high availability is meaningless until you define how to measure it. IT shops measure high availability as the percentage of
time that systems are available, but the provider and consumer of high-availability services must agree on what constitutes availability and how the time is measured.
The related KB:
Service Level Agreement Review
http://technet.microsoft.com/en-us/library/cc546625.aspx
High-Availability System Architecture
http://technet.microsoft.com/en-us/library/cc750543.aspx
Service Level Agreement Review
http://technet.microsoft.com/en-us/library/cc546625.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Is there a 32 Bit edition available for windows server 2012 and windows server 2008
Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
AhmedHi,
Quote:
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Adobe Reader Enterprise for Windows Server 2012 (R2)
Hi,
I want to silently install the latest version of Adobe Reader on a Windows Server 2012 server. When I want to download the offline installer at http://get.adobe.com/nl/reader/enterprise/ I do not see Windows Server 2012 (and/or R2) listed. Is the offline installer supported for Windows Server 2012 and/or Windows Server 2012 R2?
How can I get this to work?
Thanks in advance.The Technical Specifications are here: http://www.adobe.com/products/reader/tech-specs.html
It doesn't mention Windows Server 2012.
If this is for Citrix or WTS you should get a distribution agreement and then also get the Distribution version of Adobe Reader. -
Hi Everyone,
the following driver cab is from Windows Update:
https://onedrive.live.com/?cid=5be01620eea95d8c&id=5BE01620EEA95D8C!138&ithint=file,.cab&authkey=!APDi54-R1Ob5IWQ
It includes this display driver:
Intel(R) Q45/Q43 Express Chipset (Microsoft Corporation - WDDM 1.1)
My problem is: I can't install this driver on Windows Server 2012 R2.
I tried the following, nothing worked:
a) pnputil -i -a intel.cab
b) Extract cab, update the device's driver in device manager, select "search for driver software in this location"
c) copy the files in system32/, system32/drivers, syswow64/ from a Windows 8.1 system to a Windows Server 2012 R2 system
Isn't it true that any Windows 8.1 driver should also work for Windows Server 2012 R2 (same os version)?
Thanks for your replies.
PS: I first posted my question here:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/got-display-driver-via-windows-update-for-windows/31c287c8-ef84-4c81-8530-8c51412376b7Hi,
Additionally, did you check this article?
http://www.driveridentifier.com/scan/download.php?item_id=90475670&scanid=9B44546E3BB9410D877D9A90D1439AF8&hardware_id=PCI%5CVEN_8086%26DEV_2E12
Regards.
Vivian Wang -
After installing optional Windows Update for Windows Server 2012 R2 (KB2995388) on a print server upgraded from Windows 2012 to Windows 2012 R2, the Print Management Console wouldn't display locally shared or remotely shared printers. Another print server
could see the printers on this server, but it couldn't see it's own. Removal of the patch resolved the issue.Hi,
à
Removal of the patch resolved the issue.
Thanks for sharing in the forum. Your time and efforts are highly appreciated.
On current situation, would you please let me confirm something more?
Please check if this update rollup package (KB2995388) install successfully.
Please run sfc /scannow command to scan all protected system files after installed this update.
If be possible, please re-install Print Server feature on the server after installed this update. Any find?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2
Hello all,
After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
The job was cancelled. The user either cancelled the job or modified the associated protection group.
Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
Thnks, AndreaHi Andrea,
Have you installed the update 2919355?
To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
According to the official website, the issue which you described is not listed as the known issue.
Please uninstall this update and continue to monitor the official website for the latest news.
Best Regards.
Steven Lee
TechNet Community Support -
Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.
Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
http://www.youtube.com/watch?v=8mOuoIWzmdE
Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain as best I can and apologies from the start.
It’s a bit of both Hyper-v and Server 2012R2.
I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
examples.
New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
HostSwitchTeam for selection. When installed it shows the Microsoft Network Multiplexor Driver as the only option.
Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
Any help would be much appreciated.
Paul
Paul EdwardsHi P.J.E,
>>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
Nic 1,2
HostVMSwitchTeam
Nic 3,4,5
HostMgmtSwitchTeam
>>The adapter Binding settings are:
HostMgmtSwitchTeam
V-Curric
Nic 3
Nic 4
Nic 5
V-Livemigration
HostVMSwitch
Nic 1
Nic 2
V-iSCSI
V-HeartBeat
Based on my understanding of the description , "HostMgmtSwitchTeam and
HostVMSwitch " are teamed NIC .
You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
HostVMSwitch").
V-Curric,
V-Livemigration , V-iSCSI ,
V-HeartBeat are just VNICs of host (you can change their name then check if the virtual switch name will be changed )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Security Update for Windows Server 2012 R2 (KB3042553)
Hello,
Security Update for Windows Server 2012 R2 (KB3042553) has been advised to be critical update to deal with Vulnerability in HTTP.sys which could allow remote code execution.
However due to some reason I am unable to apply the patch to any of the Windows 2012 R2 servers. It errors - The update is not applicable to your computer, when tried to install manually / locally.
I tried to push it via WSUS and the patch is not getting detected by the servers.
Regional language settings are set to match Windows display language (Which is English).
Is anyone else experiencing this issue too? If so is there way to get this deployed please.
Thank you.
Kumar GHi Kumar,
I suggest you check the file version of Http.sys and compare it with the one documented in the KB article below:
MS15-034: Vulnerability in HTTP.sys could allow remote code execution: April 14, 2015
https://support.microsoft.com/en-us/kb/3042553
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality - The Windows Server Essentials and Small Business Server Blog - Site Home - TechNet Blogs:
http://blogs.technet.com/b/sbs/archive/2015/03/13/the-ms15-10-security-update-for-windows-server-2012-r2-essentials-and-the-client-restore-functionality.aspx
FYIHi Susan. I hope there's a better 'fix' coming to replace this "uninstall the updates, restore, then reinstall the updates after the restore". This kind of workaround requires that all of us remember that there's a problem
with KB3023562 and KB3004375 from now until the end of WS2012E. Not sure I'll remember this 6 months from now when the problem crops up during a restore. -:(
Merv Porter
========================= -
Multi-Hypervisior Manager support for Windows Server 2012 R2
Hi,
I am attempting to connect to a Windows Server 2012 R2 Hyper-V and am getting the following error message.
"Unable to Connect to host hyper01"
I have tested and can connect to a Windows Server 2012 without issue. Checking the documentation for support and whilst Windows Server 2012 is not supported I wanted to ensure I wasn't making an error.
If it is indeed not supported at this moment, is there a viable alternative?
Many Thanks
TristanHi,
Windows 2012 R2 is not supported by MHM 1.x. Please take a look at http://www.vmware.com/pdf/vcenter-multi-hypervisor-manager-11-guide.pdf, page 9, "vCenter Multi-Hypervisor Manager Software Requirements" section.
For you convenience I'm pasting the list of supported third-party hypervisors:
Microsoft Hyper-V Server 2012
Microsoft Hyper-V for Windows Server 2012
Microsoft Hyper-V Server 2008 R2
Microsoft Hyper-V for Windows Server 2008 R2
Microsoft Hyper-V for Windows Server 2008
Regards,
-Ilko -
Adobe Reader for Windows Server 2012
I need to download Adobe Reader to my server. I need Reader for Windows Server 2012, however there is no option for this operating system.
How or where do I find Reader for this operating system?Try http://get.adobe.com/reader/enterprise/
-
Windows Server 2012/2012R2 NIC Teaming Mode
Hi,
Question 1:
In Windows Server 2012 the following teaming mode was recommended for Hyper-V NIC teams:
Teaming mode: Switch Independent
Load balancing mode: Hyper-V Port
All Adapers Active
In a session at TechEd 2014 it was stated that Dynamic is the new recommendation for Windows Server 2012 R2. However, a Microsoft PFE stated a few weeks ago that he would still recommend Hyper-V Port for Windows Server 2012 R2. What is your opinions around
this?
Question 2:
We have a Hyper-V Failover Cluster which isn`t migrated to 2012 R2 yet, it`s running 2012. In this cluster we use Switch Independent/Hyper-V Port for the team. We also use converged networking, having 2 physical adapters bound to the NIC team, as well as
3 virtual adapters in the management OS for management, CSV and Live Migration. Recently one of the team NICs failed, and this incident also caused the cluster membership on the affected node to go offline even though the other team NIC was
connected. Is this expected behaviour? Would the behaviour be different if 2012 R2 with Dynamic mode was being used?Hello,
As for question number 1:
For Hyper-V workload it's recommended to use Dynamic with
Switch Independent mode. Why?
This configuration will distribute the load based on the TCP Ports address hash as modified by the Dynamic load balancing algorithm. The Dynamic load balancing algorithm will redistribute flows to optimize team member bandwidth utilization so individual
flow transmissions may move from one active team member to another. The algorithm takes into account the small possibility that redistributing traffic could cause out-of-order delivery of packets so it takes steps to minimize that possibility.
The receive side, however, will look identical to Hyper-V Port distribution. Each Hyper-V switch port’s traffic, whether bound for a virtual NIC in a VM (vmNIC) or a virtual NIC in the host (vNIC), will see all its inbound traffic arriving on a single
NIC.
This mode is best used for teaming in both native and Hyper-V environments except when:
1) Teaming is being performed in a VM,
2) Switch dependent teaming (e.g., LACP) is required by policy, or
3) Operation of a two-member Active/Standby team is required by policy.
As for question number 2:
The Switch Independent/Hyper-V Port will send packets using all active team members distributing the load based on the Hyper-V switch port number. Each Hyper-V port will be bandwidth limited to not more than one team member’s bandwidth because the port
is affinitized to exactly one team member at any point in time.
In all cases where this configuration was recommended back in Windows Server 2012 the new configuration in 2012 R2, Switch Independent/Dynamic, will provide better performance.
Microsoft recommend for a clustered Hyper-V deployment
in Windows server 2012 to use Switch Independent/Hyper-V Port as you mentioned and to configure
Hyper-V QoS that applies to the virtual switch. (Configure minimum bandwidth in
weight mode instead of in bits per second and Enable and configure QoS
for all virtual network adapters
Did you apply QoS on the Converged vSwitch after you
created the team?? However Nodes are considered down if they do not respond to 5 heartbeats. The Switch Independent/Hyper-V Port does not cause the cluster to goes down if one NIC failed. The issue is somewhere else and not in the teaming mode
that you choose.
Hope this help.
Regards,
Charbel Nemnom
MCSA, MCSE, MCS, MCITP
Blog: www.charbelnemnom.com
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if
a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
When will ADMT/PES be available for Windows Server 2012?
Having upgraded to Windows Server 2012 I would like to trash the AD and take users and their passwords across to a new domain. The main reason for this is that the AD still has a load of hacks in it from Exchange 2007 to segregate address
books. I want to tidy things up ready for Exchange 2013 so I'm building a new domain.
To get the passwords across I need to run PES on the old domain with a key generated on the new domain. ADMT 3.2 will not support this.
So my question is when is ADMT 3.3 (guessing) and PSE for Win2012 going too be released?Hi,
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Yan Li
TechNet Community Support -
Unable to install Network Adapter Driver for Windows Server 2012
Hi,
We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
Please help us to get it working.
Thanks,
Ronak ShahIt is not working as the system is having Intel® 82579V Gigabit Network Card
I guess, it's not supported on windows server 2012
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
NOTE: The following devices do not have driver or software support for Windows Server
2008 R2:
- Intel® 82566MC Gigabit Network Connection
- Intel® 82566MM Gigabit Network Connection
- Intel® 82567LF Gigabit Network Connection
- Intel® 82567V Gigabit Network Connection
- Intel® 82577LC Gigabit Network Connection
- Intel® 82579V Gigabit Network Connection
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own.
This posting is provided AS IS with no warranties or guarantees and confers no rights.
Blog |
Wiki -
Need Driver for Window Server 2012 R2
Hello I Need driver window server 2012 R2 driver for Hp laserjet MFP M226dn. Please help
Hi Bappan1, What you could try is the HP universal print driver.I can't promise that it works but please give it a shot. Go to the following link:http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=4157320 Choose your O/S Windows Server 2012 R2.It will give your 3 options:PCL6PCL5Post Script You can try either one and check if this works.Please do know that this is not the exact same driver as the original driver.This is also only for printing. Please let me know if it works. Bas Pootjes
Maybe you are looking for
-
Problem with MS Access Files and executable files migrateds
Hi all. We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES 2 SP2a. I already migrated one volume and in this weekend well migrate the last, and most important, volume to new OES 2 server. The problem is about some MS Access databa
-
How to browse a folderstructure in a Page View webpart
We use a Page View Webpart to display a folderstructure on our netwerkdrive. We can click on folders to walk down the tree structure or click on files to read or edit them. But, how can you walk back in that structure e.g. step-by-step, crumb-path, .
-
How to get photoshop cs5 or cs6
So, The title says it all really, I'm not looking for this 'Creative Cloud' where there is like a monthly payment. What I'd like is a digital (or disc) copy of Photoshop CS5 or newer but upon searching the website there doesn't seem to be a spot
-
Where the javaws stores downloaded jar files?
I met problem to start jnlp file in command line. System shows me error like "file system is full". So, I wonder where the javaws stores downloaded jar file. And how can I change it to an available directory. Thank you.
-
So she can use at home to learn ? I am using Ver 12 and my non profit has multiple licenses Premiere Pro CC The Seller said " I bought it ( Photoshop Elements and Premiere Elements ) and upgraded to the next version. It was installed once so it