What is required in the HOST and QUEUE field when ...

Hi
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
i could really use some help.
thanks in advanced.

sky00ber wrote:
Hi,
What is required in the HOST and QUEUE field when setting a WIFI printer?
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
HELP URGENTLY NEEDED!
I'm not sure but I give it a try.Turn your security(WPA/WEP) and Firewall temporarely off. HOST is the IP address of the printer. QUEUE can be YES or a specific amount of prints, like 1,2,3......
If I look at the manual of your printer I see that you can find the IP and MAC addresses in the Network Configuration Report.I don't know what the USER is doing there because if there is a user then there must be a password.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

HT5621 I am being prompted for the questions for my apple ID. I have put what I think are the answers and it is still not letting me purchase games from my account. I try to send the answers to my e-mail and I am not getting them.

I am being prompted for the questions for my apple ID. I have put what I think are the answers and it is still not letting me purchase games from my account. I try to send the answers to my e-mail and I am not getting them. I had account issues about a year ago where my id was spelled wrong. Could this be associated with that?
<Email Edited by Host>

Hi gymdad1959,
This article has instructions for resetting security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Cheers!
- Ari

In Dreamweaver MySites[New Site] menu option , if I had a hosting JSP/PHP what I must declare the hosting JSP or PHP ?

In Dreamweaver MySites[New Site] menu option , if I had a hosting JSP/PHP what I must declare the hosting JSP or PHP ?

The simplest answer is to choose the language you work best with, and that fits the clients specification the best.
I have mixed server languages on a site before, (would not recommend) when a client has decided they wish to change from their old one to a new(er) /different one, the only thing you must watch if doing this, is that you do not mix languages on the same page (will not work correctly, if at all), and parameter passing.
PZ

Red highlight next to code in dreamweaver. What is wrong with the code and is it affecting the websi

What is wrong with the code and is it affecting the website?

Line 107 looks dodgy to me and it won't have any effect on your code. However, it is a good idea to post a complete link to your CSS for us to see it in full and to validate it using external tools. In fact, you could validate the CSS (and HTML) yourself..
<http://jigsaw.w3.org/css-validator/>
Good luck.

Can u pls tell what r the currency and quantity fields in detail.

hi to all can u pls teell
can u pls tell what r the currency and quantity fields in detail.
what is reference table .and reference fields .why we r giving theese reference table names while creating the currency fields .

Hi,
Currency amount fields and quantity fields are numeric fields which each have a currency or unit field assigned to them. The correct interpretation of the values in these fields depends on its currency or unit of measure. Therefore, you can decide whether you want their corresponding currency/unit of measure to be displayed before or after the field, or not at all. Proceed as follows:
1. Select the field.
2. Choose one of the options from the window on the lower left (before, No currency field/unit, or after).
3. Choose Apply.
For more information check the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/0b/5da4e42cf511d5b692006094192fe3/frameset.htm
Following are system variables of currency:
SY-CCURS
R/2 - exchange rate and result field for CURRENCY CONVERSION. Not filled in R/3.
SY-CCURT
R/2 - table exchange rate for CURRENCY CONVERSION. Not filled in R/3.
SY-CDATE
R/2 - exchange rate date for CURRENCY CONVERSION. Not filled in R/3.
SY-CTABL
R/2 - exchange rate table for CURRENCY CONVERSION. Not filled in R/3.
SY-CTYPE
R/2 - exchange rate type for CURRENCY CONVERSION. Not filled in R/3.
SY-DCSYS
Dialog system of the R/2 System. Not filled in R/3.
SY-WAERS
Formerly the company code currency after reading a posting segment. Not filled in R/3.
Regards,
Bhaskar

I was typing in notes on my IPad. I hit what I thought was the period and looked up and my entire page of notes were gone. Can I retrieve them?

I was typing in notes on my IPad. I hit what I thought was the period and looked up and my entire page of notes were gone. Can I retrieve them?

Unless you had somehow backed up the iPad just before you deleted the notes - unfortunately there is no way to get the notes back. There is no undo feature or trash from which you can retrieve.
Are you sure that you deleted the note? You would have seen a large red Delete Note bar that you would have had to tap in order to delete the note. Have you checked the other accounts - tap accounts in the upper left corner of the app and check.

What happened to the Large and Display choices when exporting?

What happened to the "Large" and "Display" choices when exporting slide shows?

They were removed.

Whats the funny and ugly sound when I open safari in OSX Lion?

what's the funny and ugly sound when I open safari in OSX Lion?

what's the funny and ugly sound when I open safari in OSX Lion?

Hello out there... my superdrive always seems to be "off" using it requires rebooting the mini, and luck

hello out there... my superdrive always seems to be "off" using it requires rebooting the mini, and luck

Hello, I assume this is an external drive?
If so, does unplugging it and or plugging it into a different USB port bring it back?

What happened to all the Library and application support folders in Yosemite? How can I access them?

What happened to all the Library and application support folders in Yosemite? How can I access them?

1. They’re still there, but hidden.
2. Open your home folder, choose Show View Options from the Finder’s View menu, and check the box to show the library.
(118426)

What is required on the server?

What is required on the server in order to be able to run a java applet?
Any information would be greatly appreciated.
Thank you in advance,
Michelle

Please clarify your question.
Are you asking if you need any special software on the server to be able to "serve up" a page that contains an Applet?
-or-
Are you asking if there is a way to ensure that the Applet will run properly on the client's machines?
For the 1st, as long as your server supports the common mime types, it will deliver the Applet to the client's browser.
For the 2nd, if you use the JSP plugin tag you can check for a specific version of the Java plugin. (See "http://java.sun.com/products/plugin/" If the client does not have the required version, they will be prompted to download it from Sun.
The best bet is to provide a link somewhere on your site to make it easy for clients to get the latest JRE from Sun.
I hope that helps.

Color coding in the "Date" and "Time" field in "Person Assignment"

Hi,
What does it mean when the color of the values for the "Date" and "Time" fields under the tab "Person Assignment" on an activity element in the project builder (CJ20N) turn red?
Regards,
Petter Kvalvik

Hi,
I dont suppose we have any option to achieve this at Query Designer level. Your requirement can be achieved in Workbook,
Insert text template in one of the cell in your workbook, context menu--properties-Constant Tab----Check Display last Refreshed. Doing this you will get Date and Time of last refreshed data.
Thanks,
Vishnu.

My safari is not working. Every time i click on it says to reopen or dont reopen. i press reopen i gives me this long screen and it says reopen or press okay. when i press ok it closes the box and doesnt open. when i press reopen the long screen stay

. Every time i click on it says to reopen or dont reopen. i press reopen i gives me this long screen and it says reopen or press okay. when i press ok it closes the box and doesnt open. when i press reopen the long screen and stays like that.

If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also.

What is required in the HOST and QUEUE field when ...

Similar Messages

Maybe you are looking for