What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Similar Messages

Has anyone found an easy solution to the U44M1P7 error when installing CC updates?

Like many, many people, shortly after Christmas, 8 updates appeared for various CC apps including Photoshop and Premier Pro, etc.
Every time I try to install these updates, it fails with the U44M1P7 message. I took a look at the knowledge base article about this message and they suggest that some language files got deleted or something and the apps need to be re-installed.
I know for a fact that I did not delete any Adobe files at all in any way from my installation. I do not use any type of cleaner software and have not even used most of these apps let alone deleted for messed with their files in any way.
For as many people that suddenly reported this problem with updates, just makes me suspicious that there is something wrong with the stinking update.
I just can't believe that I have to re-install all this junk just to get updates working again when it just stopped working for no reason at all.
Has anyone found the reason for this and have a quick fix?
Thanks

Hello,
I just tried to install the update for Photoshop CC and this is the error log it created:
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | Visit http://www.adobe.com/go/loganalyzer/ for more information
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | START - Installer Session
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | RIBS version: 7.0.0.108
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | Win OS version: 6.1.1.0 64 bit Type: 1
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Total Timer]
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | CHECK: Single instance running
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | CHECK : Credentials
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Load Deployment File
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | deploymentFile option not given
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | CHECK : Another Native OS installer already running
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Create Required Folders
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Assuming install mode
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Looking up install source path
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Sync Media DB ...
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Sync Media DB]
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Pre check media db sync
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | End of Pre check media db sync. Exit code: 0
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Sync Media DB] took 66.0508 milliseconds (0.0660508 seconds) DTR = 7751.61 KBPS (7.56993 MBPS)
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Ready to initialize session to start with ...
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [CreatePayloadSession]
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | -------------------- BEGIN - Updating Media Sources - BEGIN --------------------
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Updated source path: C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Updating media info for: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Ignoring original data since install source is local
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 |   Type: 0, Volume Order: 1, Media Name: AdobeCSXSInfrastructure4-mul
Path: C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup\payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | -------------------- END - Updating Media Sources - END --------------------
01/14/14 10:34:04:617 | [INFO] | | OOBE | DE | | | | 892 | Supported RIBS version range: [0.0.0.0,7.0.0.108]
01/14/14 10:34:04:617 | [INFO] | | OOBE | DE | | | | 892 | ----------------- CreatePayloadSession: machine is x64 ---------------
01/14/14 10:34:07:117 | [INFO] | | OOBE | DE | | | | 892 | ______ Verify Dependency Subscribers ______
01/14/14 10:34:07:118 | [INFO] | | OOBE | DE | | | | 892 | BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
01/14/14 10:34:07:118 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: 0 (0,0)
01/14/14 10:34:07:118 | [INFO] | | OOBE | DE | | | | 892 | END Operation order for all session payloads: mediaGroup (requires,satisfies)
01/14/14 10:34:07:120 | [INFO] | | OOBE | DE | | | | 892 | Patch Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} can be applied to product Adobe CSXS Infrastructure 4 4.0.0.0 {5F816B76-62F3-41C9-B651-27F49F25F50B}
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Ignoring deployment input for the INSTALLDIR: marked as fixed
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Setting property "installSourcePath" to: C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Setting property "mode" to: silent
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Setting property "updateManifestPath" to: C:\Users\fjcranston\AppData\Local\Adobe\AAMUpdater\1.0\Data\AdobeCSXSInfrastructure4-4\4. 0.2\4.0.2.xml
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Setting property "workflow" to: updater
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "extensionsOnly" to: 1
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "mode" to: silent
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "patchesOnly" to: 1
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "updateManifestPath" to: C:\Users\fjcranston\AppData\Local\Adobe\AAMUpdater\1.0\Data\AdobeCSXSInfrastructure4-4\4. 0.2\4.0.2.xml
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "workflow" to: updater
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Found payload actions:
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Deciding what installer mode to use...
01/14/14 10:34:07:156 | [INFO] | | OOBE | DE | | | | 892 | BEGIN Setting requested payload actions
01/14/14 10:34:07:157 | [INFO] | | OOBE | DE | | | | 892 | Value returned on lookup of payload: Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} is: false
01/14/14 10:34:07:158 | [INFO] | | OOBE | DE | | | | 892 | Action string for Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} is install
01/14/14 10:34:07:158 | [INFO] | | OOBE | DE | | | | 892 | END Setting requested payload actions
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | Collected advanced path check information for INSTALLDIR
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is a well-formed path
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is not the root path
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is on a local volume
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is on a writable volume
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is not on a case sensitive volume
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR passed path basic path validation: C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4
01/14/14 10:34:09:995 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [System check :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | In InstallPreSystemCheckProc
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [System check :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 30.5966 milliseconds (0.0305966 seconds)
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | BEGIN InstallOperationsQueue Unordered operations
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: with operation install
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | END InstallOperationsQueue Unordered operations
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | BEGIN InstallOperationsQueue Ordered operations
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: with operation install
01/14/14 10:34:10:026 | [INFO] | | OOBE | DE | | | | 892 | END InstallOperationsQueue Ordered operations
01/14/14 10:34:10:095 | [INFO] | | OOBE | DE | | | | 892 | Payloads passed preflight validation.
01/14/14 10:34:10:095 | [INFO] | | OOBE | DE | | | | 892 | Call PreSession Custom Hook
01/14/14 10:34:10:096 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Pre session :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | In InstallSessionOpenProc
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Pre session :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 9.06221 milliseconds (0.00906221 seconds)
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | BEGIN InstallOperationsQueue Unordered operations
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: with operation install
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | END InstallOperationsQueue Unordered operations
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | BEGIN InstallOperationsQueue Ordered operations
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: with operation install
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | END InstallOperationsQueue Ordered operations
01/14/14 10:34:10:114 | [INFO] | | OOBE | DE | | | | 892 | Calling the custom action code for pre-install for payload Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}
01/14/14 10:34:10:115 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Pre payload :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:10:124 | [INFO] | | OOBE | DE | | | | 892 | In PrePayloadInstallProc
01/14/14 10:34:15:128 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:15:128 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Pre payload :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 5013.23 milliseconds (5.01323 seconds)
01/14/14 10:34:15:128 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Payload Operation :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:15:138 | [INFO] | | OOBE | DE | | | | 9384 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:15:138 | [INFO] | | OOBE | DE | | | | 9384 | Installer Operation: PayloadInstaller
01/14/14 10:34:15:138 | [INFO] | | OOBE | DE | | | | 9384 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:15:138 | [INFO] | | OOBE | DE | | | | 9384 | Request to install payload
01/14/14 10:34:15:161 | [INFO] | | OOBE | DE | | | | 9384 | Payload Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: Calling ARKEngine from path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
01/14/14 10:34:15:295 | [INFO] | | OOBE | DE | | | | 9384 | Extracting assets complete. Number assets: 2
01/14/14 10:34:15:295 | [INFO] | | OOBE | DE | | | | 9384 | CustomizedPatch property not found in database
01/14/14 10:34:15:295 | [INFO] | | OOBE | DE | | | | 9384 | Beginning installation for payload at C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup\payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
01/14/14 10:34:15:340 | [ERROR] | | OOBE | DE | | | | 9384 | DF045: File corruption detected. Re-install the product & then apply the patch again. (Can not repair file "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\zlib1.dll")(Seq 4)
01/14/14 10:34:15:340 | [WARN] | | OOBE | DE | | | | 9384 | DW063: Command ARKPatchCommand failed.(Seq 4)
01/14/14 10:34:15:341 | [INFO] | | OOBE | DE | | | | 9384 | Completing installation for payload at C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup\payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
01/14/14 10:34:15:437 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:15:437 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Payload Operation :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 308.934 milliseconds (0.308934 seconds)
01/14/14 10:34:15:442 | [INFO] | | OOBE | DE | | | | 892 | User specified overrideFile:
01/14/14 10:34:15:446 | [INFO] | | OOBE | DE | | | | 892 | The csu inventory was not updated for payload Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}, value of local var is -1
01/14/14 10:34:15:446 | [INFO] | | OOBE | DE | | | | 892 | Calling the ROLLBACK custom action code for pre-install for payload Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}
01/14/14 10:34:15:446 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Pre payload :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:15:450 | [INFO] | | OOBE | DE | | | | 892 | In PrePayloadInstallProc
01/14/14 10:34:20:455 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:20:455 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Pre payload :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 5008.83 milliseconds (5.00883 seconds)
01/14/14 10:34:20:461 | [INFO] | | OOBE | DE | | | | 892 | No operation. We're done:
01/14/14 10:34:22:466 | [INFO] | | OOBE | DE | | | | 892 | Total components installed: 0
01/14/14 10:34:22:466 | [INFO] | | OOBE | DE | | | | 892 | Total components repaired: 0
01/14/14 10:34:22:466 | [INFO] | | OOBE | DE | | | | 892 | Total components removed: 0
01/14/14 10:34:22:466 | [WARN] | | OOBE | DE | | | | 892 | DW050: The following payload errors were found during install:
01/14/14 10:34:22:466 | [WARN] | | OOBE | DE | | | | 892 | DW050: - Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul: Install failed
01/14/14 10:34:22:466 | [INFO] | | OOBE | DE | | | | 892 | Call PostSession Custom Hook
01/14/14 10:34:22:467 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Post session :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:22:474 | [INFO] | | OOBE | DE | | | | 892 | In InstallSessionCloseProc
01/14/14 10:34:22:474 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:22:474 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Post session :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 7.32732 milliseconds (0.00732732 seconds)
01/14/14 10:34:22:474 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Total Timer] took 17948.1 milliseconds (17.9481 seconds) DTR = 32.984 KBPS (0.032211 MBPS)
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | -------------------------------------- Summary --------------------------------------
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | - 0 fatal error(s), 1 error(s)
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | Win OS version: 6.1.1.0 64 bit Type: 1
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 |
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | ----------- Payload: Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} -----------
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | ERROR: DF045: File corruption detected. Re-install the product & then apply the patch again. (Can not repair file "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\zlib1.dll")(Seq 4)
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 |
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | Please search the above error string(s) to find when the error occurred.
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | These errors resulted in installer Exit Code mentioned below.
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | -------------------------------------------------------------------------------------
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 |
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | Exit Code: 7 - Unable to complete Silent workflow.
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | Please see specific errors for troubleshooting. For example, ERROR: DF045 ...
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | END - Installer Session
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

"The system cannot find the path specified" error when installing a network printer running Win 7

Some of the end users are having issues when trying to install network printers. We have created a portal where they can locate the printer they want to connect to, click connect, and the printer will download with the correct drivers on their PC's. The
entire company is running Win 7 for their operating system. One end user in particular has had issues installing multiple printers from the portal, when I go to test installing these same printers on my PC, they all install successfully. trying to figure out
why some end users hav issues with installation and others do not. They will get the error, The system cannot find the specified path. Any help would be great

Hi JeffWilko,
What is your current situation?
To receive better analyzation, please provide more details?
1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
2. Check the event viewer and share us the related error log.
Please take the following steps for troubleshooting:
1. Ping the printers
2. Check if there are network firewall to block the access
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I keep getting the 1935 error when installing lightroom

Hello Adobe Community,
From a few months I have been trying to install Adobe Lightroom but it just won't . Every time i get the 1935 error - [img]http://i.gyazo.com/35bc318f8b362b84784f40895527327a.png[/img]
I have tried using a cmd command , disabling my anti-virus but still no luck . I hope someone can help me out!
Best Regards
Criss

https://forums.adobe.com/search.jspa?q=error+1935+lightroom

Getting the follwing error when installing CVP 7.01

Trying to install CVP 7.01 the following error.....received [COULD_NOT_CREATE CERTIFICATE] while trying to setup keystore

https://forums.adobe.com/search.jspa?q=error+1935+lightroom

Error when installing 10.5 on my win 7 64 bit

I keep getting an error when I try to install Itunes 10.5. It seams to install the whole program and then gives me an error and rolls back the installation. I've seen that others are getting the same error message. does anyone know how to fix this?
Thanks

Ok, if you get this message I've read a bit further and found that you must uninstal everything that has something to do with apple. this includes the device driver. this link may help you with that. http://support.apple.com/kb/ht1925 Once I went through the list and deleted everything (device support is a *****). I installed it again and it came up with the same error. I then clicked ok and it rolled back but automatically started installing again and it worked. I know have itunes 10.5. but know my iphone 4 wont connect to it, lol. it says i have to reinstal because the driver didn't take or something. I really want the OS update for my phone but gd this is a bit much.

How do i fix the recovery error when installing mavericks?

I have a 2012 MacBook Pro running 10.8.5 (tons of space on it) and in trying to install Mavericks, I keep getting an error message about not being unable to create a recovery partition. Anyone know how to fix this (preferrably, without buying equipment)?

I ended up calling Apple Support because this was a weird issue that evidently, even our top helpers couldn't figure out. Here's what I had to do:
First... settle in, it's a lonnnnnnnng process with periodic moments of activity, but it's worth it in the end.
Step 1:
Back up to TimeMachine on an external hard drive & set aside (this can take a very long time--sometimes up to 5 hours, but for me it only took about an 1 1/2 hrs.).
Shut down the computer.
Step 2:
Press Command-R and hold it down while starting up the computer. You will see a spinning globe and at some point you will be asked to select your internet connection. Do so.
Step 3:
A window will pop up with a selection including: Restore OS X using external source like TimeMachine, Install a new version of OS X, Disc Utility...
Select the Disc Utility
Go to the tab that says ERASE. I know, I know.... it's scary, but as long as your back up was successful (and you can make 2 to be safe), you'll be fine.
Select the Drive that says "Macintosh HD" and erase it. All of your documents, photos, music, settings, apps, etc. are saved to your back up so don't panic. This step only takes about 10 seconds.
Quit Disc Utility and it will bring you back to the initial window.
Step 4:
NOW select "Install New Version of OS X" (about an hour)
Once installed, go through the set up process like you just bought it new.
Step 5:
Go to the App Store and NOW download (about an hour) and install (another hour+) the upgrade to Mavericks.
Step 6:
Go to Applications/Utilities/Migration Assistant and follow the steps for restoring a back up from TimeMachine (another hour). This does not do anything to your new OS, it only restores all your documents, photos, music, settings, apps, etc...
Finally, you will find that many apps like Pages, iPhoto, Numbers (a fair number of applications) will need to be updated. Just update them from the App Store and be patient.
Personal Experience: I didn't lose any apps or documents. The only thing I had to re-do was re-connect to DropBox (if you have DropBox).
If you are at all concerned about the process, I highly recommend calling Apple Support and having them hold your hand. It just makes you feel better (sure made me feel better).

Error when installing SM7 "The step runMigrationMonitor with step key "

Hi all
Please help for the following error when installing
ERROR 2009-06-13 00:27:13.515
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Regards
Kevin

Hi Uday
import.monitor.java.log
Loading of 'SASACONT1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
Loading of 'STERM_TEXT' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
Loading of 'SEOSUBCODF' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
Loading of 'E071K' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
Loading of 'ATAB' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 4, fail
ed 23, total 29.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

ISScript error when installing Palm Desktop

I am recieving the following error when installing palm desktop for a z22:
"1:The InstallScript engine is missing from this machine. If availible, please run ISScript.msi, or contact your support personal for further assistance,"
I know the setup app uses ISScript 11 so I have downloaded and installed it, but it is failing still. Does anyone have other suggestions?
some other info:
Platform: Windows XP Pro
Thanks in advance.
Paul
Post relates to: Zire

follow the steps provided. this is related to your problem.
Error - 1607: Unable to Install InstallShield Scripting Run Time
Update to the Latest InstallShield Installation Engines
http://knowledge.macrovision.com/selfservice/viewContent.do?externalId=Q108322&sliceId=1
When running into installation issues, it is always recommended that you use the latest InstallShield installation engines. This article contains steps on how to download and install the latest InstallShield engines for the installation version you are trying to install.
What to do?
Follow the Troubleshooting steps below:
Determine if the installation is compressed or uncompressed.
Launch Windows Explorer by pressing the Windows key + E or select Start > Run and type explorer.
Browse to the location of the installation files. For example, if the installation is on a CD, browse to the CD-ROM drive.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc.
If the installation file is the only file in the directory (a single installation file), continue with the remaining suggestions in Step 1. Otherwise, if there are other files in the same directory as the installation file, continue to Step 2.
When a single installation file is run, it uncompresses the installation files into a temporary location (usually the Temp directory). Use these steps to find the installation in the temporary location:
Start the single installation file, but do not continue or cancel the installation dialogs.
Browse to the Temp directory. For further information on how to find the Temp directory, see Clean the Temp Directory.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. The uncompressed installation file should contain other files in the same directory. Continue with step 2.
Right-click on the installation file that you are trying to install and select Properties.
In the Properties dialog, click on the Version tab.
Look at the File Version field to determine the version number of the InstallShield engine you need. Follow the instructions for your version. If you started the installation in Step 1d, cancel it.
If the file version number is 2.0x or less:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 6:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 7:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\7 from the machine.
Download ISScript7.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the ISScript engine for the version of the setup.
If No:
If the file version is less the 7.01
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0700 from the machine.
Download InstallShieldEngineUpdate700.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 7.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701 from the machine.
Download InstallShieldEngineUpdate701.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 8:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\8 from the machine.
Download ISScript8.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript8.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 9:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\9 from the machine.
Download ISScript9.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\00 from the machine.
Download InstallShieldEngineUpdate900.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\01 from the machine.
Download InstallShieldEngineUpdate901.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 9.5:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 10:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\00 from the machine.
Download InstallShieldEngineUpdate1000.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\01 from the machine.
Download InstallShieldEngineUpdate1001.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 10.5:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\1050 from the machine.
Download ISScript1050.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\50 from the machine.
Download InstallShieldEngineUpdate1050.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 11:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\11 from the machine.
Download ISScript11.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\11\00 from the machine.
Download InstallShieldEngineUpdate1100.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
Post relates to: Treo 680 (Unlocked GSM)

Error when install Infrastructure 10g 10.1.2 in Windows2000 server

My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
Trung

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

Get_Block Error when installing an application

Hi all,
I tried to recover a backup I had made some days ago, and I got the following error when installing the application:
Error GET_BLOCK Error.
ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 34, column 68: PLS-00103: Encountered the symbol &quot;&amp;&quot; when expecting one of the following: ) , * &amp; = - + &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;= &lt;&gt; and or like like2 like4 likec between || multiset member submultiset <pre> &lt;br&gt;begin &lt;
I looked in the .sql application and searched for the "&quot;" or even for the symbols &" and I found nothing. I checked the character set and it seems right, the application is in UNICODE-UTF8 and the database is in UTF8 as well. I'm working with APEX version 4.1.1 and apex listener 1.1.
Has anyone got this error before, or does anyone have a tip on where to investigate?
Thanks in advance.
Elena.

For those who have gotten this error as well..
The problem was in the buttons Expand /Collapse that I had in some trees. I had them with a redirect url pointing to a javascript code like this:
javascript.apex.widget.tree.expand_all('id');I changed these buttons, I set an action "Defined by a Dynamic Action". This DA is called when the button is clicked and executes this javascript code:
apex.widget.tree.expand_all('id');Now it works. Hope it can help someone.
Elena.

Jrew error when install 8i client in chinese win98

I got the following error when installing the 817 client to chinese win98.
JREW caused an invalid page fault in
module JAVAI.DLL at 0167:6ee3803a.
Registers:
EAX=00000060 CS=0167 EIP=6ee3803a EFLGS=00000206
EBX=c0000005 SS=016f ESP=0063ebf0 EBP=0063f184
ECX=c15089f0 DS=016f ESI=00000009 FS=3587
EDX=816aac84 ES=016f EDI=00000000 GS=0000
Bytes at CS:EIP:
8b 4f 3c 33 c0 03 cf 2b f7 66 8b 41 14 33 d2 66
Stack dump:
0063f184 0063f2a0 0063f1c8 c0000005 00000000 00000000 00000000 00400000 00010000 00000000 00020000 6ee37ac9 00000009 0063edb8 00000104 0063ec58
How to resolve it ?

1. Yes, it's a distributed installation. I choose ABAP stack installation and then choose Java installation as add in.
2. Yes, J2EE_ADMIN & J2EE_GUEST can log on to system with password james123.
3. In usercheck log file, it contains a part of information of sapinst.log, shows below.
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
        at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
        at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
        at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)

Errors When Installing 0PUR_C01

Hi Friends,
I get the follwoing error when Installing this cube.
(1)Error when reading the update rules fr InfoCube 0DBDUNS_NUM, ISource 0DBDUNS_IMPORT_ATTR in vers.M
(2)Transfer rules 0RF_ARTHIER_ACT BWDCLNT100
(3) DataSource 0RF_ARTHIER_ACT for source system BWDCLNT100 is not available.
(4) Data source 0DBDUNS_IMPORT_ATTR not maintained
I tried to Install them from RSA5 , but they are not availble either, PLease advice,
Thanks in advance,

HEy Smily,
Try installing them from Business Content in RSA1.
These update rules etc need to be installed in BW from business content.
Also, data sources need to be installed from RSA5.
hope it helps...
Gaurav
Assign points if it helps**

Root.sh failed throws error when installing Oracle Grid Infrastructure 11.2

Hi,
root.sh failed with the following error when installing / configuring the oracle grid infrastructure version 11.2.0.1 for standalone on RHEL 6
Now product-specific root actions will be performed.
2011-10-10 11:46:55: Checking for super user privileges
2011-10-10 11:46:55: User has super user privileges
2011-10-10 11:46:55: Parsing the host name
Using configuration parameter file: /apps/opt/oracle_infra/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'oracle', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node vmhost1 successfully pinned.
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /apps/opt/oracle_infra/crs/install/roothas.pl line 296.
I followed the steps / solution provided in the ID 1069182.1. But no use.
Are there any workaround?
Thanks
-KarthicK
Edited by: user11984375 on Oct 10, 2011 7:06 AM

Check the logfiles under $GRID_HOME/log/<node_name>/cssd/
I had seen the same problem and the following resolved the problem for me.
[root@rac1 ~]# rm -f /usr/tmp/.oracle/* /tmp/.oracle/* /var/tmp/.oracle/*
[root@rac1 ~]# > $ORA_CRS_HOME/log/<node_name>/cssd/<node_name>.pid
HTH,
Raj Mareddi
http://www.freeoraclehelp.com

Toad error when installing

hi am installing toad 10.5.1 in window 7 am geting the following error when installing
the following product require .Net Framework 2.1 and will not be insattled can someone help where can i get the correct .Net Framework for oracle toad

Pl post this in the TOAD forums - http://toadfororacle.com/forumindex.jspa?categoryID=649
HTH
Srini

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Similar Messages

Maybe you are looking for