What is the application for  'Cancellation of post goods issued'  in NACE !

Please any one tell me the application for cancellation of goods issued tcode VL09.

Hi,
This is for reversal of goods issue.
If in some case you have picked a material and done PGI then you decide that there was an error is Ship to Party or delivery date or rates etc. and we want to revert back then you dont cancel the delivery instead in the first place you reverse the goods so that the material and accounting documents that have been posted during PGI are reversed.
Regards,
Jn

Similar Messages

  • What is the application for credit memo in NACE !

    What is the application for credit memo in NACE !

    Pls go through this link
    Re: Need some help in Credit memo !

  • Can I know what is the process for us to do Good Return from customer?

    Can I know what is the process for us to do Good Return from customer?

    hi
    this ques need to be posted in sd forum..
    to answer this u can use order type RE to create Return order and then u can do the goods receipt..
    or u can use the process mentioned in first reply.
    regards
    CMM

  • BAPI for Picking and Post Goods Issue ?

    Hi All,
    Is there any BAPI for doing Picking and Post Goods Issue in VL02N ? I don't think we can use BAPI_OUTB_DELIVERY_CHANGE.
    Is it advisable to use BAPI or BDC ( if no BAPI exist ).  Thanks in Advance.

    BAPI for picking in VL02N
    BAPI_OUTB_DELIVERY_SAVEREPLICA
    BAPI for posting Goods Issue
    BAPI_OUTB_DELIVERY_CONFIRM_DEC
    For reference: http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/LEIDW/LEIDW.pdf

  • How to restrict the GR for Production Order when Goods Issue is not done

    Hi Gurus
    How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
    Pls suggest best solution.
    Abhijit.

    Hi,
    You can club together the GI nad GR at the time of confirmation..
    I.e Backflush for the components and auto GR for the Product.
    So that you can stream line the Process.
    The best Option would be to use the User Exit:
    Enhancement - MBCF0002
    Functional Module - EXIT_SAPMM07M_001
    Include - ZXMBCU02
    Refer below link for further details..
    How to stop the goods receipt before issueing the goods for production orde
    Regards,
    Siva

  • OutBound IDOC for Delivery when Post goods issue is trigered

    Hi All
    Does any body have idea which IDOC contains data regarding delivery header and item details.
    for header - sap delivery number , delivery date, ship mode, vessel name, container
    for detail - product code, expiry dt, batch.
    cheers
    AJ

    Hi
    List of IDOC's
    http://www.informatik.fh-wiesbaden.de/~werntges/lv/edi/specs_EN/SAPdoc/IDoc_d.htm
    regards
    pavan

  • What is the criteria for a post to show up in the top-level MacBook area?

    I thought that the newest posts from the "Using your MacBook" section always showed up in the top-level MacBook section (here):
    http://discussions.apple.com/category.jspa?categoryID=218
    But I have noticed several threads that aren't showing up in the top-level area, even though they have new posts. Has the behavior changed recently??? What is the criteria for getting your post to show up in that area? It seems to be the place where you get the most answers...

    The appropriate place for a question about the functionality of the Discussions itself is the Feedback About Discussions forum:
    http://discussions.apple.com/forum.jspa?forumID=1076
    A quick glance at this forum shows each of those topics have had at least 9 replies in less than 24 hours.
    -Doug

  • Post goods issue at the time of complete shipment

    Hi Experts,
    Please let me know the configuration steps to do post goods issue in the complete shipment.  Appreciate your help.
    Thanks.
    with regards,
    Muthu.

    Dear Muthu,
    Please go through this IMG path then do the configuration settings.
    SPRO>Logistics Execution>Transaportation>Shipments>Define and Assign activity profiles, here you maintain variant name in the At completion colomun select your shipment document then click on Maintain push buton now system will take you to the maintain variant screen in that screen you can find the tab Post goods issue for the deliveries of shipment under this tab you put radio button for carry out goods issue posting during save, then save the variant.
    Now you create shipment document while saving the shipment document PGI will carry out for the deliveries which are avail in that shipment document.
    If you more details go through this link it will help you,
    http://help.sap.com/saphelp_47x200/helpdata/en/3d/42aa07074f11d2bf5d0000e8a7386f/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • Reversal or cancellation of a Goods Issue document (transaction VL09) ,

    Hi Experts,
    I am trying to look for a user exit that will be triggered after user confirm the reversal or cancellation of a Goods Issue document (transaction VL09).
    I want to put validation while cancelling document if movement type is 101 it should not cancelled.
    any solution please reply.
    Thanks & Regards,
    Yogesh

    Check this thread ..
    User Exit During Goods Issue Cancellation/Reversal
    Transaction Code - VL09 Cancel Goods Issue for Delivery Note
    Exit Name Description
    V02V0001 Sales area determination for stock transport order
    V02V0002 User exit for storage location determination
    V02V0003 User exit for gate + matl staging area determination (headr)
    V02V0004 User Exit for Staging Area Determination (Item)
    V50PSTAT Delivery: Item Status Calculation
    V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
    V50R0001 Collective processing for delivery creation
    V50R0002 Collective processing for delivery creation
    V50R0004 Calculation of Stock for POs for Shipping Due Date List
    V50S0001 User Exits for Delivery Processing
    V53C0001 Rough workload calculation in time per item
    V53C0002 W&S: RWE enhancement - shipping material type/time slot
    V53W0001 User exits for creating picking waves
    VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Rewards if useful.

  • Help on IDOC -POST GOODS ISSUE

    Hi Folks,
               I have requirement with me, but I don’t know where to start could you please help me regarding that..
    Here is the scenario....
    Requirement Specification:
    XYZ Company Mexico operations  uses third party systems Foursite) for their inventory process.
    The communication between Foursite and SAP is thru EDI/IDOC.
    In the case of goods customer return to Mexico warehouse, using the following steps the process will be mapped in to SAP.
    Customer calls the account specialist.
    Account specialist creates a ZO order in SAP and conveys a RA to customer.
    Account specialist creates a delivery. The delivery information conveyed to Mexico warehouse thru Inbound receipt IDOC.
    Customer physically returns the goods to Mexico warehouse.
    Mexico warehouse receive the goods with reference to delivery number in Inbound receipt IDOC.
    Once the goods are received, Mexico warehouse send a conformation (Receipt confirmation IDOC) to SAP, which triggers PGI and credit memo.
    Functional Specifications:
    Create POST GOODS ISSUE in SAP for the material and quantity for the delivery mentioned in Receipt conformation EDI.
    Receipt confirmation from Foursite
    Data fields received in the EDI
    Delivery number:LIKP-VBELN
    Material number::LIPS-MATNR
    Quantity:LIPS-LFIMG
    Unit LIPS-MEINS
    Plant :DMEX
    Status  :RS
    Possible IDOC:  SDPICK
    Trigger:
    This IDOC should trigger a Post good issue, for the possible values.
    Transaction: Post good issue.
    Please give ur input /suggestion , What steps I should take to get it complete .
    Thanks in Advance..
    Bye and have a good one .

    Somnath,
    If I understand the right, it is like a integration using EDI formats. Do you have a middleware in place to do the mapping transformation? If yes, the message in EDI format will be recieved by the middleware and will be transformed into IDOC format.
    Then you do the normal settings for an IDOC to be recieved into a SAP system (Partner Profiles, Inbound Messages etc).
    Is this what you were looking for?
    Regards,
    Ravi
    Note : Please reward the posts that help you.

  • Disable Customer-Material Number field during VL02n before post goods issue

    Hello SAP gurus,
    I would like to ask the possibility of disabling the field "Customer Material Number' during outbound delivery creation.
    As we would know, this field (LIPS-KDMAT) will only be disabled after post goods issue.
    Will it be possible to disable the field without having to post goods issue first?
    Thanks in advance.
    Jayson

    I think you can do with SHD0 screen variant, or else you need to go with userexit to make display field.

  • Post goods issue process

    post goods issue process

    HI Deva,
    After creation of sales order.
    Use transaction VL01n in the screen put the shipping point date and go in.
    After you reach in go to the pick tab pick same quantity or quantity less than delivery quantity.
    At the top there is a Post goods issue button click that.
    Your PGI si done
    Regards,
    Srikanth

  • What is the alternative for DisplayMemberPath="Value" for Windows Store applications?

    I think there is a bug with Windows Store Applications when it comes to using DisplayMemberPath="Value".
    Here is my code
    <ComboBox Height="40" VerticalAlignment="Stretch" SelectedValuePath="Key" DisplayMemberPath="Value" x:Name="comboBox1" FontSize="25"/>
    var source = new Dictionary<string, double>();
    source.Add("Item1", 0.4);
    source.Add("Item2", 0.3);
    source.Add("Item3", 0.1);
    source.Add("Item4", 0.1);
    var formateDSource = new Dictionary<string, string>();
    foreach (var item in source)
    formateDSource.Add(string.Format("[{0}, {1}]", item.Key, item.Value), item.Key);
    comboBox1.ItemsSource = source;
    If you use this code in WPF in works perfectly. However if you use this code in a Windows Store Application then the Combo Box is empty and an error is thrown. So is there an alternative way to do this in Windows Store Applications and have I unearthed a
    bug? Because I have researched the Web for days and found no solution to this.*please do not comment unless you have tried my code as a Windows Store App not a WPF in Visual Studios. Can Someone post an example based on my code that works in Windows Store
    Apps please because this is terrible.
    Thanks

    It looks like you got an answer on SO:
    http://stackoverflow.com/questions/29817124/what-is-the-alternative-for-displaymemberpath-value-for-windows-store-applicat
    This does look like a bug.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • I recently upgraded to Mac OS X.  I hadn't try to access anything in iWorks 09 since the upgrade, until now.  I get an error message when trying to open any of the iWorks 09 applications.  What's the fix for this?

    I recently upgraded to Mac OS X.  I haven't tried to access anything in iWorks 09 since the upgrade, until now.  I get an error message when trying to open any of the iWorks 09 applications.  What's the fix for this?

    Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.

  • When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?

    When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?

    You don't have to be "in" Safari for it to cancel logout.
    You have several different Applications open, and any one of them may cancel logout if conditions are just right.
    Quit the Applications you are no longer using and your Mac will run better and faster. And it will logout instead of cancelling.

Maybe you are looking for