What is the best Dell PC configuration to run Master Collection CS4

Hi
What is the best Dell Computer/PC configuration to run Adobe Master Collection CS4 smoothly. Also please mentione about the experiences with Dell(if possible with, Dell Australia) I am using a Dell Dimension 8400 bought in 2005 (2.8GHz, 2 GB DDR2 RAM, 1 TB HDD Capacity)
Ur help is much appreciated. Thx
Pushpa

Dell does not have any sensible 'best PC configuration', not even when you go for the best they offer, which is over $ 14 K and is still lacking. But you have a power cord free. However, if you opt for redundant power supply, you need to choose a second power cable. Strange they did not include that in the option for redundant PSU's.
Dell is only good if they offer a system that meets your requirements fully. If you need anything else than their standard configuration, better go elsewhere or build it yourself. It is pretty easy to build a system for less than the price of a Dell that outperforms it by a wide margin, because their BIOS is crippled and they charge the most extravagant prices for everything not in their standard offer.
If money is no object, try to configure a dual W5590 system with at least 24 GB ECC RAM and at least an Areca raid controller and 8 disks in raid3. But with Dell, if at all possible, the price will be around $ 20 K US or more.

Similar Messages

What is the "best" way to configure iTunes on an iMac with personal user acounts so each user can access the media library but sync devices on their personal user account?

I am trying to determine the best way to set up our imac so each user account can access the same media (songs, movies etc.) through itunes and also back up and manage their personal devices under their own personal user account. There are 4 users on our iMac. Me, my wife, and our 2 children. We have built an extensive library of music/media together using the same iTunes store account. I would like to establish a seperate apple id and iTunes store account for each of us going forward but have the ability for each of us to share our purchases. What is the best way to configure our system and devices in order to allow shared access to media and at the same time allow for individual management of devices including contacts, apps, photos, etc. Please help, I would like to do this once!
Thank you in advance!

OK, seeing as no-one replied (presumably because a lot of this information is on the forums in bits elsewhere) here's how I've got on so far.
Applications - just went through them. About the only one I needed was my media server app. Just downloaded and re-installed, had a quick look back though my email to find the license key and it all went on fine. Installation never seemed quite right on my old machine so solved that problem too.
Movies - New iMovies just copied across the clips and projects into their respective folders. Seems to have worked but haven't checked it all that thoroughly. Some duplicate footage here but I can trim this out at some point when I get a chance to go through here.
Documents - Just copied these across.
Photos - used an app called iPhoto Library Manager. You can download for free but have to pay to use the part that consolidates your libraries. Possibly if I was willing to spend a bit more time I could have got away without using this but given I didn't know the state of my different libraries and just how many duplicates I had this was too much of a convenience to ignore. Also got my library into a state where I can now spend a few hours organising it a bit better with Faces / Events etc.
Not attempted Music or iPhone sync yet as been stuck trying to solve a problem with my power adapter.

What is the best way to configure storage device for rac?

Hi
On my disk array i have 7mirors and two conroler, what is the best way to configure environment?
My application is OLTP, it runs 6-20 o clocj, so i can do backup when nobady work
Database 10g r2, Windows 2003 enterpise
for examlep
First controler
disks 1-5 DATA
second cotnroler
disks 6-7 FLASH
or meyby share one disk on DATA and FLASH?
Thanks in advice

The best is you use ASM (maybe you do it already) and put one failure group on the first disk array and the second failure group on the second array. Then you can ASM let do the work.
Werner

What is the best way to configure password in Cisco IOS?

I am running IOS 15.2(4) on a 1921 Router
What is the best way to configure the password for the router? I have already tried once and managed to lock myself out of another switch. I would like to use the most secure method which encrypts the password.
Current Config:
username admin privilege 15 password 0 cisco123

Cisco IOS will not let me use a type 5 password. This is the error message I receive:
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
I tried generating an MD5 hash and inputting that in and that did not work either. When I do not specify type 5 it will default to using an encrypted type 4 password.
Also, what is the difference between these two enable secret commands?
enable secret 5 password
username admin privilege 15 secret 5 password

What is the best way to connect macbook running sling adapter to the tv

what is the best way to connect macbook running slig adapter content to the tv

Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about so I don't loose any of my photos/keywords? Wh

I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about: so I don't loose any of my photos/keywords? Who can help?

The Bridge General Discussion can give you the specifics of transferring your information over to Bridge CS6.

What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.

What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.
I am lead to believe by some real smart guys on the Apple site that If I have the Apple Store partition my iMAC and add the full suite of Office products on that partition, I can run the few Access programs I have and need to run.
Comments encouraged. Thank you in advance for your consideration and help.

You would have to install Windows, then install Microsoft Office Professional for Windows on it To install Windows you will have to choose between Boot Camp (faster, free) and a Virtual Machine (simpler, slower, easier to backup)
You should try LibreOffice (free), it can open Access files, it may not have all Access's feature set though, worth a try.
www.libreoffice.org

What is the best powered usb hub to run with 3 external hard drivers with high speedy?

Hi guys
I have a mac book pro, and I use 3 external hard disk, and 1 usb mouse and some times a sync my iphone and my ipad... It's really boring manage all this usb connections. I bought a usb at dealextreme http://www.dealextreme.com/customerphotos/quarantined/201102/33189-94cc49b0-fb06 -4b58-abf5-ea5fab06c803.jpg but i doesnt work proprely, the hard drivers keep disconnecting. I think its because of the power source, that is not enough to keep all those devices running. I`m whiling to buy a hub that keep all hard drives connected properly all the time.
So what is the best powered usb hub to run with 3 external hard drivers with high speedy?

Hi guys
I have a mac book pro, and I use 3 external hard disk, and 1 usb mouse and some times a sync my iphone and my ipad... It's really boring manage all this usb connections. I bought a usb at dealextreme http://www.dealextreme.com/customerphotos/quarantined/201102/33189-94cc49b0-fb06 -4b58-abf5-ea5fab06c803.jpg but i doesnt work proprely, the hard drivers keep disconnecting. I think its because of the power source, that is not enough to keep all those devices running. I`m whiling to buy a hub that keep all hard drives connected properly all the time.
So what is the best powered usb hub to run with 3 external hard drivers with high speedy?

What is the best way to configure my iPods and user accounts?

I'm looking for a little guidance. Here is my situation:
I am running the latest version of Tiger. It is currently configured with three accounts; mine is the admin. account and each of my two children have their own accounts.
My account is the one that is used most of the time. All of our calendars in iCal are maintained here including one for each of the kids. Each of the kids has their own Contacts list in the Address Book as well. I currently have a 5G 30GB iPod Video that I sync with iTunes through this account. Shortly, I will be buying an iPod Touch. I want my 30 GB iPod to be the one that has everything on it; it will be the one we take in the car on trips for music. I want the Touch to have some, but not necessarily all, of my music and all of our calendars and contact information. I am looking to use it to replace my Palm as my PDA.
My son has a 2G Nano which currently syncs through his account.
My daughter will be getting a 3G Nano soon.
I will also be upgrading to Leopard very soon.
Ultimately, I would like each of the kids to have their own iTunes libraries for music and podcasts and to sync their iCal calendars. As I understand it, however, they cannot access their calendars from their own accounts under my current arrangement. I also understand that there are several ways to configure my Mac to work with multiple iPods.
Given all of this, what is the best thing for me to do? Should I set up all of the kids' iPods to sync through the admin. account so they can get their calendars at the same time? Or is their some way for them to have access to their calendar information from their own accounts under Tiger (or Leopard)? And as far as my two iPods (the Video and the Touch), should they sync through separate libraries, or through one using playlists. I also want to minimize duplicate data wherever possible, be it music or records in iCal and the Address Book.
Thanks in advance for any suggestions or advice!

Anyone...anyone? Bueller...Bueller?

What is the best way to configure my time capsule if I just want to use it for storage?

I have a time capsule that I just want to use as backup storage - I don't need it for accessing the internet. What is the best way to set it up? I just tried and it seems to override my normal internet WLAN, which isn't what I want. If I re-insate the existing WLAN, presumably the backup won't happen automatically on the time capsule. Any insights very welcome!!
Dave

To work as a backup location the TC has to be part of the existing network.
The best way to achieve that is to plug the TC into the existing modem router and put it in bridge mode.
Apple lately have tried to force people to use the TC as the main router.. and the setup via airport utility pushes you in that direction but it is wrong.
You bridge it and use it as storage.. that is fine.. Simply turn off the wireless if you prefer to use the existing wireless, although for Macs the TC will often work better and you can pick up internet through it at the same time.
With access by wireless you cannot have two separate networks. If you try to do that, then you will have one connection with internet and no backup.. and another connection for backup with no internet and be forced to swap between the two.. do not do this!!
You can even setup wireless as roaming.. so same name and security and password as your existing modem router.. and allow the computer to determine which is the best signal to join.

What is the best Hard Disk Configuration?

Hi all!
I've been reading the forum for some time, and now I decided to build my new PC for editing.
I will use it with Premiere and After Effects CS5.
The hardware I am going to buy is listed below:
- Processor Intel Core i7-2600K
- Mother Board ASUS SABERTOOTH P67 (or the ASUS P8P67 Deluxe... I didn't decide it yet)
- 2 Hard Disks WD Caviar Black 1TB SATA III (6Gb/s) 7200RPM [for working media and exports]
- 1 Hard Disk Seagate Barracuda 500GB SATA II (3Gb/s) 7200RPM [for OS and Programs]
- SDRAM DDR3 Corsair 8GB (2 x 4GB) 1866MHz (PC3 15000)
- Video card ATI Radeon 5850 1024MB (later I'll buy another and CrossFire them)
- Pioneer Internal Blu-ray Disc/DVD/CD Writer BDR-206
I also have a eSata Docking Station and other slower HDDs for Backups and "Old Projects Library".
So, my question is simple: what is the best way to use my HDDs, to get the best performance on Premiere and After Effects?
A) OS, Programs, PageFile and Media Cache on the Seagate HDD + Media, Projects, Previews and Exports on the WD HDDs working on RAID0; or
B) OS, Programs and PageFile on the Seagate HDD + Media and Projects on one WD HDD + Previews, Media Cache and Exports on the second WD HDD?
Thanks a lot!
Thiago
Ps.: My next upgrade will be another 8GB for RAM and another 2 WD Caviar Black HDDs, as soon as I make some money with that machine... xD

Hey Harm, thanks for the response.
First of all, I did choose the ATI GPU because of the benchmarks I saw on internet, BUT i didn't know about the CUDA Acceleration Technology. So, I will probably buy a nVidia GTX460, since it is at the same price level, but seems to have a better performance with Premiere and AfterEffects. =)
But the question is about HDDs, so let's get to it.
I read in the forum that it doesn't make a big difference to have RAID 0 HDDs or even use the SATA III drives foe video editing, because the system doesn't even use the whole bandwith of the SATA II technology.
But, in another question, I read that it depends on the type of files you are working with. I have a Canon 550D, so it records in 330MB/min (about 45MB/s) in 1080/24p, using the h.264 codec (in *.mov files). Those are the files I will edit and I want to burn Blu-Ray disks with my movies.
That said, my doubts are:
A) Should I invest on SATA III disks for better performance? Will I take any advantage of the 6Gb/s bandwidth, or the only difference will be the 64MB cache?
B) Is it better to have a faster C: drive?
I am asking that to get a better use of my investment. If the SATA III disks won't give me any difference on performance, I could get some SATA II disks and then use that money to buy more RAM - or faster RAM, like 2000MHz.
Thanks again!!!
Thiago

EMac 800 512MB - What is the best level of OS to run ?

I need to reload OS X on my emac, but before I go out and buy a set of CDs I though I would ask what is the best level of OS X to purchase (10.3, 10.4 etc.) that will run comfortably on my 800mhz 512MB emac ?
Is there a feature comparison list anywhere ?
Thanks.

I just bought a full retail Tiger DVD package online here:
http://store.fastmac.com/productinfo.php?productsid=100
It was indeed a retail box with shrink wrap still intact.
If your eMac does not have a DVD drive, the same source claims to have Tiger retail on CD:
http://store.fastmac.com/productinfo.php?productsid=111
Not cheap but the alternatives (some grey system disks) may cause trouble or not work at all.

What is the best way to configure AE for use as a wireless bridge?

I am using an AE to provide airtunes to my living room receiver as well as getting internet connection to my living room PC. The way I have it set up is that I am connecting to my existing wireless network (provided by a dlink dir-655) and then plug in the minijack for airtunes and plug in ethernet cable between AE and PC. I don't have a wireless card in the PC so that's why I connect via ethernet cable/AE.
The problem is that the speed with the AE connected PC when it comes to the web, is quite slow. Many times Youtube just freezes and sometimes never catches back up.
I've checked speeds with speedtest.net and my speeds fluctuate an extreme amount.
Is there a way I should configure the AE better to act as a bridge for my ethernet/AE connected PC?
BTW, I'm only about 25 feet from the dlink wireless router so connection quality should be fine. As both devices support N, I think things should work better!
any suggestions?
Thanks

The newer 802.11n version of the AirPort Express offer an option to configure the base station as a wireless Ethernet bridge. Again, Apple calls this ProxySTA. You configure for a ProxySTA by having the base station join an existing wireless network AND by enabling the "Allow Ethernet Clients" option, located on the Wireless tab within the AirPort Utility.
My point is that, as a ProxySTA, the Express will NOT extend the wireless range of your D-Link router. Instead, it WILL allow wired clients to connect to its Ethernet port for network/Internet access.
In the manual setup settings, I see that there is a wireless setting to extend a wireless network and to participate in a WDS network. Would either of these two be better for what I'm trying to accomplish?
In this scenario, no ... as a WDS would not work because very few non-Apple routers are WDS-compatible. Most likely, your D-Link is not as well ... so your current configuration is the only option for what you are trying to do.
It seems that this current configuration should be rock solid, but perhaps I'm not using the proper setup.
The #1 problem with a ProxySTA is that it does not provide the highest level of bandwidth performance. Typically, for the AXn, the best-to-worst performance would be the following configurations: 1) Wired-to-wireless, 2) Wireless-to-wireless (WDS), and 3) Wireless-to-wired (ProxySTA)
As you can see, the first option would be the best, but it would require that you connect the AXn directly to the D-Link by Ethernet ... which, of course, would tie-up its only Ethernet port so that you could not connect the PC to it as you require.

What is the best 3d computer configuration for Lightwave 9?

I'm using at work a Intel Mac pro with Dual Core 3GHz, 4Gb RAM and ATI 256Mb Ram. I'm using LightWave 9.0 for my work and it takes a week to render an image. I would like a workstation that does the job half of the time. Can any one give the best configuration?
Thank you
Luis

The latest version of LightWave, version 9, takes ful advantage of Intel's multi-core processor support, yielding substantial speed improvements.
Xsan may be the magic bullet to team up multiple Xserves though.
http://www.apple.com/pro/profiles/rowland/
http://www.apple.com/science/solutions/clustercomputingresources.html
The LightWave v9.5 Mac open beta program is currently available until upcoming final release. LightWave v9 owners can participate by registering at: http://register.newtek.com/.
Might want to participate not only to test and evaluate, but sometimes you have access to more tech support from engineering too.
According to Intel benchmark of Lightwave:
... uses well-threaded code to complete on multi-core processors much quicker than ever before.
So it should scale directly by the number of cores (and how efficient they perform).
http://www.geekpatrol.ca/2006/12/eight-core-mac-pro-benchmarks/
CPU:
Do you want to buy a new high-end Mac Pro, or look at a 'do it yourself' swap the processors for dual quad-core 3GHz? Do you go with a new system with 2.8GHz or 3.2GHz 8-core?
No, because it isn't cost effective to upgrade the cpu, not when 8-core upgrade on your system would run $1600 for 2.66GHz or $2400 for 8-core 3GHz.
Graphics:
Sounds like you slipped the new ATI Radeon 2600XT (to replace the troublesome X1900). Today there is Radeon 3870 or Nvidia 8800GT option as after-market upgrades.
The elephant in the corner department....
*NVIDIA Quadro FX 5600*
Featuring a massive 1.5GB frame buffer of GDDR3 memory, the NVIDIA Quadro FX 5600 is the ultimate workstation-level graphics card. It’s ideal for industrial-strength 3D design work, modeling, animation, and stereo 3D visualization. One of the most advanced graphics cards available, it has an integrated stereo 3D port, so you can use stereo goggles for stereo-in-a-window visualization applications. With two dual-link DVI ports, you can connect two 30-inch Apple Cinema HD Displays.
# NVIDIA Quadro FX 5600 1.5GB [Add *$2,850.00*]
- only available as a Build to Order
From Barefeats:
WHY MOST USERS SHOULD PASS ON THE $2850 QUADRO FX 5600
Though it costs 14 times as much as the GeForce 8800 GT, it is not 14 times faster.
However, the Quadro FX 5600 does feature more video memory (1.5GB vs 512MB). And, according to one Maya guru, the extra memory (and superior memory management code) of the Quadro workstation cards becomes useful for frame buffering in Maya. This is especially true for redraw of multiple views of the same complex 3D model.
This has been enhanced further by Quadro FX 5600's new integrated memory allocation which allows the card to dynamically allocate on-board RAM to whatever task is at hand rather than have specific hard wired allocations. So rather than say a maximum of 40% of total on-board RAM dedicated to the texture buffer the card can ramp up and down from 80% sharing with the immediate needs of the other buffers.
http://www.barefeats.com/york2.html
Best bet: you can use the Nvidia 8800GT in your system for $279
http://www.barefeats.com/harper8.html
Memory:
Easy to upgrade.
Disk drives:
Lots of improvements in drive performance, in controllers, RAID6 for handling large files and projects and offer protection.
Apple Store Specials:
Refurbished Mac Pro 8-core 3.2GHz Intel Xeon
Two 3.2GHz Quad-Core Intel Xeon processors
2GB (2 x 1GB) of 800MHz DDR2 ECC fully buffered DIMM
500GB Serial ATA 3Gb/s 7200-rpm hard drive
Two 16x SuperDrives (DVD±R DL/DVD±RW/CD-RW)
NVIDIA GeForce 8800 GT 512MB (two dual-link DVI ports)
Mac Pro 3.2GHz (8-core) $4099
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nplm=FB 451LL/A
Refurbished Mac Pro 8-core 2.8GHz Intel Xeon
Two 2.8GHz Quad-Core Intel Xeon processors
2GB (2 x 1GB) of 800MHz DDR2 ECC fully buffered DIMM
320GB Serial ATA 3Gb/s 7200-rpm hard drive
16x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
ATI Radeon HD 2600 XT 256MB (two dual-link DVI ports)
Mac Pro 8-core 2.8GHz $2399
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nplm=FA 970LL/A
BOTTOM LINE if you ignore price and want the best, you are looking at $5700 - 7,300 range for your ideal Lightwave 3D workstation I think. Skip on the 3.2GHz to save $1600 and put it toward the Quadro FX 5600.

What is the best hard drive configuration for disk/media cache?

I just installed a 480 GB PCI SSD for my boot drive. I also have a 240 GB SSD and a 1TB 7200 rpm hd. Can anyone suggest on which drives to place my source files, aep files, media and disk cache and output for the best read/write speed? Thanks for any advice. Same question for Premiere Pro too, if you know!
I'm using a Mac Pro dual proc, 12 core, 40 GB.

Hi YoshBear,
Welcome to Adobe forums,
We recommend you to go through following link as it provides more information about setting up hardware for Premiere pro and After effects :
http://forums.adobe.com/thread/878520
http://helpx.adobe.com/after-effects/using/improve-performance.html
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/creativesuite/produ ction/cs6/pdfs/adobe-hardware-performance-whitepaper.pdf
Regards
Abhishek

What is the best Dell PC configuration to run Master Collection CS4

Similar Messages

Maybe you are looking for