What is the best laptop for Photoshop Elements 10 ?

I have HP Pavilion g6 Notebook,i5-245M 2.5GHZ, 4 GB mwmory, 64-bit Operating system window 7, Radeon Graphics, Eidtior not working , I get error message ( Unable to continue because of hardware or system error,Sorry,but this error in unercoverable).
So I want to give this one to my son, and I want to bay new One for me,
but i do not want to have same Error with my new Laptop,
So any one know what is the best Laptop for PhotoShop Elements 10 ?
Thanks for Helping me .

I would suggest a machine with a multi-core processor and plenty of storage as photo files take up quite a lot of room over time. Many laptops have a screen resolution of 1366 x 768 and whilst elements will run OK some menu functionality will be missing if the display is not at least 800 pixels in height. A resolution of 1600 x 900 would be much better.
Independent advice is best, such as Which, UK. You can get a trial membership for as little as £1 to access their recommendations.
http://www.which.co.uk/technology/computing/reviews/laptops/best-buy/verdict/

Similar Messages

  • What's the best Mac for Photoshop?

    I daily work on layered photoshop files, up to 10 (ten) GB. I currently have a G5 with 8 gb of ram. I finally can afford to upgrade to a faster computer and need to figure out if the 8core 2.93GHZ at $5,899 is the best buy for me. The 8 core 2.26GHZ is $3299. For an additional $2500 I would need to know that I will get at least 15% increase in speed. I remember back in the day when I picked out the fastest g5, when I later compared it to a slower G5, the difference in speed was barely noticeable, and when I upgraded to 8GB of RAM I discovered that photoshop could only take advantage of 2 GB.
    Does photoshop benefit from 8core vs 4 core?
    Will an 8 core 2.26ghz be faster than a 4 core 2.93GHZ when working in photoshop?
    Is there something new coming out, so I would benefit from waiting with my purchase?

    I work on big files, tho not that big.
    For many of the time-critical things I do in Photoshop seem to be single-processor, so even tho I have an 8-core machine, often only one is being used. This includes things like flatening and saving. So I am not sure that (unless you have other programs running) you would ever see an advantage to more than 4 cores.
    What I do notice when I work with big files, is that I keep a copy of Activity Monitor open, and whenever the green sector in memory goes to zero, my computer becomes unusably slow, and I usually reboot. I don't understand memory managment on the Mac, but whatever "inactive" means, it really means "swap yourself to death". So I have 14GB of RAM on my computer, and I usually don't run out even when dealing with big files. But I know that 8GB would not have been enough. Photoshop may not use more than 2GB, but it and the OS can cache materials and when those caches get too big, my computer comes to a halt. With your files, you may find 32GB to be useful.
    What I have done is to burn a CD or DVD with one big psd/psb file and walk down to my local Apple Store. The machines there don't have much RAM, but you can get some feeling for 4 cores vs. 8 cores. Reboot them before you do anything.
    One thing I would strongly recommend you do not try is what I did with my old G5--install a RAID. It only increased opportunities for losing files, and while it certainly sped up many file operations, I don't think any Photoshop operations were affected at all.
    A

  • What is the best tablet for photoshop editing?

    For Christmas I want to get my dad a tablet (I guess this is what they are called? With the pen?) for editing his photos on the computer. He loves editing his pictures on Adobe Lightroom, but always complains about the mouse giving him trouble. So without asking my Dad questions and giving the gift idea away, it would be awesome if you could give me some input, advice, and suggestions. Thank you. I'm so excited about surprising my Daddy this Christmas!

    I purchased the 9.8 x 6.9 inch tablet. I use the touch function for browsing
    the web and most of the time for general work instead of the mouse. I use
    the pen when working with Lightroom or Photoshop Elements  and plugins such
    as Photomatix or Perfect Layers; any time when requiring delicate input.
    www.tonybarranco.com

  • What is the best replacement for Photoshop from the App Store?

    One of the things I miss is my ability to use Photoshop with earlier OS versions.  I do keep a MacBook Pro to the side of my desktop iMac so I can still use Photoshop.
    My questions is....can anyone suggest a suitable replacement for Photoshop that I can use with the latest versions of OS?  I have already tried Pixelator but it does not have some of the features that I really beed (like drop shadow).
    Thanks in advance.
    -MacPaige

    MacPaige wrote:
    I have already tried Pixelator but it does not have some of the features that I really beed (like drop shadow).
    Could have fooled me!

  • What is the best setup for Photoshop CS5 on a Dual Drive Laptop?

    I have a new W701ds with Windows 7, 16 gig of ram, drive C is a 256GB SSD, the second drive is 7200rpm 500GB HDD. I want to use was thinking about partioning the second drive to allow for backup. .

    Welcome to the forum.
    If the partition is ONLY to be used for backup, you are probably OK, but if you plan on using it for say Scratch Disks, I would hold off on that.
    With the fast SSD Drive 0, you will have your OS and programs there. Then you will have your images and your Scratch Disks on Drive 1. Even faster would be to have the Scratch Disks on Drive 2, but you only have the SSD and the one SATA HDD, so the former is as good as it gets.
    Good luck,
    Hunt

  • What is the best resource for photoshop brushes I can use commercially?

    I have been down a hundred trails of photoshop brush websites where almost all of them don't allow commercial use of the brush, for art that will be "reproduced" into a product .
    Most sites claim you can use the brush for commerical use, but they don't allow "reproductions" where I might make money using the brush to make a greeting card.  Considering I'm an independent greeting card designer for large companies, that isn't possible.
    I'm willing to pay for brushes, I just need ONE place I can go to, where I can purchase brushes withou copyright or permission hassles.
    Many brush artists want "name credits" if I use their brush, but how that is possible when I use 20 different brushes on one design is beyond me.
    I'm really tired of searching endless websites, only to find out when I download the brush set, there is an attachement from someone that says I must give a name credit if I use the brush.  This is completly unrealistic.

    Under
    Creative SB brand - http://www.creative.com/products/welcome.asp?category=
    Audigy 2 Zs VE (USB)
    Audigy 2 NX (USB)
    Li've! 24-bit External (USB)
    Audigy 2 Zs Notebook (PCMCIA)
    <i>(Digital Music LX (USB))
    (Digital Music SX (USB))</i>
    Creative E-MU brand - http://www.emu.com/products/category.asp?category=60
    http://www.creative.com/products/welcome.asp?category=237
    0202 USB
    0404 USB
    66/66M (PCMCIA)
    other brands ... (too many to list)
    http://www.musiciansfriend.com/rec?g=rec&s=computer
    http://www.zzounds.com/cat--Audio-Interfaces--248
    E-MU 0404 USB and 66/66M PCMCIA are quite good ones (and cheap ones too) but, as best ones you're asking are devices like RME FF800 and some MOTU and DigiDesign models, etc..
    jutapaMessage Edited by jutapa on -2-20062:9 PM

  • What is the best laptop for architectural design?

    I mostly need if for revit. I currently have a lenovo thinkpad T61. It has been great but is getting old, and I think it is about to crap out. I would like to stay with lenovo but im up for any suggestions.

    Hello,
    It might be best to look at the requirements for the architectural design software that you want to run, and then look at which systems match those specifications.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • What is the best laptop for a graphic design student?

    Hi, I`m going to study graphic design. I want to buy a new computer for this purpose.
    Which qualities should I look for? Which computers work good with Adobe Creative Suite® 6?
    Thank you for advice.

    You didn't defined a budget. So for best for the buck I would definitly go for a Lenovo IdeaPad 510p.
    Very good overall performance : Great processor, very power graphic card (really nice for Video Editing), SSD + HDD combo wich make it really fast to boot and use softwares.
    It has also a very nice Full HD screen with REALLY nice colors. IdeaPad Y series have really good screens compared to every other companies (even Samsung).
    Last touch : Backlid keyboard, aluminium cover and "slim" (for the components).
    Usually start at 1200$ but they have alot of specials. Right now its 849$
    Up to 4th Gen Intel® Core™ i7 processor
    Windows 8
    NVIDIA® GeForce® GT750M 2GB graphics
    Up to 16GB DDR3 memory
    Up to 1TB HDD + 24GB SSD
    Up to 5 hours' battery life
    15.6" FHD (1920 x 1080) widescreen display
    Starting at 5.95 lbs / .61" thin

  • HT4914 I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

    I purchased iMatch because my old computer was failing and I was afraid of losing my music library. Now I bought a new laptop; what is the best way for me to transfer my library to my new laptop? Will iMatch help me do this?

    Is/was failing or has failed?
    If the old computer still runs one of these methods may be best.
    Method 1
    Backup the library with this User Tip.
    Restore the backup to your new computer using the same tool used to back it up.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    I don't have personal experience with iTunes Match, but in principle you should be able to download all the tracks currently registered to your iTunes Match account. This isn't quite the same as restoring your previous library exactly as it was. There is always the potential for iTunes match to provide the wrong version of a song and could be content such as movies, podcasts, audiobooks etc. that would have been excluded.
    tt2

  • Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC

    Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC. I would appreciate any help with this.

    Thanks for the quick help. I do have to leave for work. When I try to
    download the images from the camera they seem to only be in jpeg (I don't
    see any rw2 or raw files to download). If I select the jpeg file it seems
    to only download a jpeg file. I do understand that I do have the option to
    open the jpeg in RAW. In doing this, is all the extra information included
    in the RAW file there or is it lost coming from the camera
    Once again thank you for trying to make me understand how this works.
    Have a great day.
    On Sat, Sep 13, 2014 at 12:14 PM, ssprengel <[email protected]>

  • What is the best resolution for pics in the drop zones of idvd?

    What is the best resolution for pics in the drop zones of iDVD?
    Also: iDVD always seems to align a pic to the left, can I change this anywhere?
    thanks

    Hello, Hans.
    Re: drop zone pic resolution - I generally don't go below 1000 pixels wide (iDVD will resize these images to a slightly smaller format, but I've controlled the largest part of the downsizing in Photoshop Elements).
    The alignment in iDVD is goofy.  The best I've achieved is trial and error -- adding blank background or cropping my image in the downsizing process (see above) to position my image.
    John

  • What is the best practice for inserting (unique) rows into a table containing key columns constraint where source may contain duplicate (already existing) rows?

    My final data table contains a two key columns unique key constraint.  I insert data into this table from a daily capture table (which also contains the two columns that make up the key in the final data table but are not constrained
    (not unique) in the daily capture table).  I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns).  Currently, what I do is to select * into a #temp table from the join
    of daily capture and final data tables on these two key columns.  Then I delete the rows in the daily capture table which match the #temp table.  Then I insert the remaining rows from daily capture into the final data table. 
    Would it be possible to simplify this process by using an Instead Of trigger in the final table and just insert directly from the daily capture table?  How would this look?
    What is the best practice for inserting unique (new) rows and ignoring duplicate rows (rows that already exist in both the daily capture and final data tables) in my particular operation?
    Rich P

    Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
    to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for: 
    https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
    >> My final data table contains a two key columns unique key constraint. [unh? one two-column key or two one column keys? Sure wish you posted DDL] I insert data into this table from a daily capture table (which also contains the two columns that make
    up the key in the final data table but are not constrained (not unique) in the daily capture table). <<
    Then the "capture table" is not a table at all! Remember the fist day of your RDBMS class? A table has to have a key.  You need to fix this error. What ETL tool do you use? 
    >> I don't want to insert rows from daily capture which already exists in final data table (based on the two key columns). <<
    MERGE statement; Google it. And do not use temp tables. 
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • What is the best program for designing event flyers? I am looking for something basic and simple.

    What is the best program for designing event flyers? I am looking for something basic and simple.

    Poor old Photoshop® is forever being put down when it comes to layout work, but it is perfectly capable, and can output a high quality print PDF the printer will be perfectly happy with.  OK you don't have the text flow between columns bells and whistles of InDesign and [spit] Publisher, but if you have a $10/month Photoshop/Lightroom subscription, instead of the $50/month full subscription, don't think you can't do a perfectly good flyer or poster.
    https://helpx.adobe.com/photoshop/how-to/align-objects-guides.html

  • What's the best program for print? especially for newsletter, flyers, and catalogs?

    what's the best program for print? especially for newsletter,
    flyers, and catalogs? is FH going to be deprecated? thanks,
    bryan

    > what's the best program for print? especially for
    newsletter, flyers, and catalogs? is FH going to be deprecated?
    thanks, bryan
    If you have used FreeHand before it is sill FreeHand of
    course - as long as it works in our OS and there are no new
    features you like to use.
    If you have documents with a lot of text elements and
    multiple pages InDesign may be the second best choice. For
    typography it is the best tool available.
    Illustrator is more for illustrations, although it seems that
    it has good control for type it is clumsy and there are a few major
    bugs that makes it unsuitable for body text.
    Jukka

  • I have the serial number for Photoshop Elements 5 and need a way to download software.

    My laptop was replaced at work with a new laptop.  I have the serial number but do not have the windows downloaders for Photoshop Elements 5.  I see where you can get the downloader for 7.  Can I still get it for 5 somewhere?

    As far as I know, 7 is the furthest back that is available.

Maybe you are looking for

  • How to change default location of password file ?

    Hi all, Can i change the location of my password file from default to any other user defined location ? If yes then how ? Thanx in advance. Deep

  • BW APO Reports

    Hi, I have to present reporting session to a client on APO BW Reporting I know we dont have outof the box APO reports like R/3 in BI  Content. My question is more on functional area.What are the possible reports can be build in BW from Demand Plannin

  • Extending IDOC type

    Hi, Iam using the business object BUS20001 (CRMXIF_ORDER_SAVE_M) to create service order in CRM 3.1 system using LSMW. We have an addfiled in the order hence extended the IDOC type (ZCRMXIF_ORDER_SAVE_M02B), creating a new segment and attaching to th

  • Invalid endpoint URL

    Hello all, I am developing a portlet that uses EDK 5.1 (.NET). In the Page_Load event handler, I have the following two lines of code: Plumtree.Remote.Portlet.IPortletContext myPortletContext = Plumtree.Remote.Portlet.PortletContextFactory.CreatePort

  • Permission denied when saving from applications on shared volume

    We have an AFP shared volume on Xraid attached to an Xserve running 10.5.8. The OS is kept up to date. Users started to get a "permission denied" message when trying to save open files on the shared volume, which is using POSIX permissions only. This