What is the best resolution for pics in the drop zones of idvd?

What is the best resolution for pics in the drop zones of iDVD?
Also: iDVD always seems to align a pic to the left, can I change this anywhere?
thanks

Hello, Hans.
Re: drop zone pic resolution - I generally don't go below 1000 pixels wide (iDVD will resize these images to a slightly smaller format, but I've controlled the largest part of the downsizing in Photoshop Elements).
The alignment in iDVD is goofy.  The best I've achieved is trial and error -- adding blank background or cropping my image in the downsizing process (see above) to position my image.
John

Similar Messages

  • How can I get the best resolution for images in the pdf?

    When I magnifies images on the iPad PDF mode, the image loses a lot of quality.
    How I can improve them to be viewed without pixel?

    stupid problem. I don't know why Adobe dosent fix it.

  • What is the best resolution for E540 Edge?

    Hi !
    Someone can tell me what is the best resolution for E540 windows 7? (The recomended is 1920x1080, But I don't like it...).
    any recommendations?
    Thanks

    1920x1080 but you have to enable Windows scaling features and set it to 125%
    In linux... well... don't use linux with full hd 15' displays for atleast 2 or 3 more years... hahaha theyr support for high resolutions is just... *rap...

  • What is the best app for cleaning up the hard drive?

    What is the best app for cleaning up the hard drive?

    No such application needed.
    Leave 10 to 15% disk space free.
    Restart once in a while.
    Keep a backup, clone preferably.
    If there is any problem with the disk, repair disk.
        Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836
    Best.

  • What is the best resolution for adding and viewing pictures/images in ibooks?

    I'm trying to add pictures/images and I was wondering what the best resolution is for viewing?  Any help would be great.

    iBook Author seems to scale the images automagically during the book generation, so targeting iPad's native resolution should be fine.
    Havign said that, I'm currently creating art based on the assumption the next generation of the device will have double resolution screen, so a photograph should be scaled to 2048x1536 pixels if you want it to be full screen at 1:1 pixel mapping.
    If you're creating widgets, the art (probably) won't be scaled, and you'll need to use the pixel dimensions you want the art to appear on screen.

  • The BEST solution for gmail on the iPhone

    OK, so after much poking around, I finally figured out the best solution for using gmail on the iPhone: IMAP support.
    While I think Google is still rolling this out to all users, once you get it, USE IT! It basically keeps your mail app synced with gmail, and even supports the use of folders/labels.
    To see if your gmail account is ready for IMAP, go to the settings option in gmail and see if one of the tabs says "Forwarding and POP/IMAP." If you don't have IMAP available on your account yet, it won't say IMAP.
    Here's some links to get you started:
    setting up IMAP for gmail on your iPhone:
    https://mail.google.com/support/bin/answer.py?answer=77702
    how actions in your mail app sync to gmail:
    https://mail.google.com/support/bin/answer.py?answer=77657
    I hope this helps out everyone as much as it's helped me. I was a little frustrated before using POP, but gotta love IMAP! I'm not too sure the impact that this has on your battery life, but so far it's working well for me. Enjoy!

    Gmail and IMAP have totally change my tune about the iPhone's email abilities. I was getting frustrated with the inability to reliably get mail (Message has not been downloaded...), sync (have to delete mail from both iPhone and desktop Mac), etc., but now I have all my POP email accounts automatically forward to my Gmail account, and I only check Gmail with the iPhone and MacPro. So far, it's a whole new iPhone experience! No more errors - ALL mail comes through perfectly - and no need to manually sync!
    Note that, when setting up the Gmail/IMAP accounts, do NOT simply update your old POP Gmail settings on your Mac or iPhone! Start with a FRESH new account. I couldn't get either the iPhone or Mac to work until I started with a fresh account.
    Also, I was unable to send mail from the iPhone using the smtp.gmail address, so I had changed the outgoing mail setting to use my regular ISP's smtp address. But, at some point (a few minutes later or a few hours, I don't know) when I checked the Gmail settings on the iPhone, it had magically changed itself to smtp.gmail, with the port number, and it has been working perfectly ever since! Maybe IMAP can atomatically correct this info? Not sure.
    One more thing. Once you have Gmail IMAP working, then you MUST go here:
    http://5thirtyone.com/archives/862
    Follow these directions exactly. This is a necessary set of steps in order to make your iPhone and Mac sync correctly, so that trashed mail on the iPhone will go in the trash on your desktop Mac, etc. It's pretty freaky to check email on the iPhone, and then go to your Mac Mail a few minutes later, and see all the newly trashed (or saved/read) emails perfectly synched up!
    A final note. Once this is all working and synching, remember that if you delete an email on your iPhone, it gets deleted on the desktop Mac Mail as well (and vice-versa)... which is exactly what you want to happen, but I find that I have to remember to keep the mail that I want to save on the iPhone's inbox until I get back to my desktop Mac. Otherwise, I have to manually remove it from the trash to save it!

  • What's the best resolution for album art?

    I have encountered some 500x500 album art images that don't fill the album art box, and some 200x200 album art image that do completely fill the box. So I assume that there's more to importing album art than just pixel counts.
    That leaves pixel density, or resolution. What should the proper resolution be for a 500x500 pixel album art image? Anything else I'm missing?
    Thanks. WeedMonkey

    72 pixels per inch is usually the default and I find this works reasonably well, although if you want high-detailed covers I'd go for something like 144 or even 200PPI. I get all of my album art from www.7digital.com and save the 350x350 images. I find they are just the right size for Cover Flow and on my iPod.

  • What is the Best Resolution for TV?

    Hi,
    I have been putting movies I've created via Final Cut / iMovie onto my TV. I'm using VideoMonkey to convert the files to MP4 format. I want to create the highest resolution possible and space/file size is no concern. But I don't want to create a resolution that is too high for TV.
    VideoMonkey's default format for TV is 1024x720 @ 24fps H.264 Video. But I can set the quality to low, standard or high. And encoding options are from fast to high quality (2 pass). I can set everything to the best but I want to make sure the TV can even utilize it.
    I can create these movies as high as 1080p that is 4GB. But again, is it worth creating that file size so large if TV can only play an HD 720 version?
    I hope this is clear.
    Thanks!

    for the original appletv you should be looking at either 1280x720 @ 24pfs or 960x540 @ 30fps.
    the adverised bitrate limitation for the original appletv is 5000kbit/s.

  • What format gives you the best resolution for Home videos to be put on IPAD 2

    I am a new user to the IPAD
    I want to move some of my Home videos on to the I pad. 
    What is the best format? 
    I have sync the same videos to I phone 4 they look great but on the Ipad they are grainy

    Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
    If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
    Frame Size: 1280x720
    Aspect Ratio: HDTV 720p
    Pixel Aspect Ratio: Square
    Editing Timebase: 29.97
    Compressor: Motion JPEG A
    Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
    Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

  • Hi guys I'm wondering what's the best resolutions for the case ?

    I have my iPod and I put it on charge battery the night before.
    On the morning I'm checking it I fund it been turned off and it haven't turn on at all its unbelievable my mate see it u told me its power issue and say's to me could be cost repairing as you buying new one its iPod 4 generations what's the best resolving do u think guys thanks?

    Wow.
    Very hard to read.
    Please repost using sentence structure and punctuation.

  • What is the best Resolution for this Error: Failed to execute IS server package because of error 0x80131904. Server:

    Dear Forum Members,
    I have an SSIS running perfectly when i run it in Visual Studio Shell. I have organized it into a job which runs well on SQL Server agent at intervals. 
    However, suddenly, i started having this error as stated in the title. Please find details of the error below and kindly help resolve it ASAP.
    Error Details:
    Date 1/27/2015 11:24:00 AM
    Log Job History (FmdqSync)
    Step ID 1
    Server ITGTESTSERVER
    Job Name FmdqSync
    Step Name S1
    Duration 00:00:30
    Sql Severity 0
    Sql Message ID 0
    Operator Emailed
    Operator Net sent
    Operator Paged
    Retries Attempted 0
    Message
    Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 64-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  11:24:00 AM  Failed to execute
    IS server package because of error 0x80131904. Server: ., Package path: \SSISDB\FMDQSync\FMDQServerDataSync\FMDQServerDataSync1.dtsx, Environment reference Id: NULL.  Description: Timeout expired.  The timeout period elapsed prior to completion of
    the operation or the server is not responding.  The statement has been terminated.  Source: .Net SqlClient Data Provider  Started:  11:24:00 AM  Finished: 11:24:30 AM  Elapsed:  30.187 seconds.  The package execution
    failed.  The step failed.

    Hi Sadeeq,
    Based on your description and the error message, it should be a timeout issue when the ADO .NET Source connects to the source database. So, please refer to the following two suggestions:
    Double click on the ADO .NET Connection Manager, click the All tab, and set the “Connect Timeout” property to a bigger value. By default, it is 15 seconds.
    Increase the DefaultBufferSize value of the Data Flow Task. By default, the DefaultBufferSize is 10 (MB), you can increase it to a value that is less than 100 (MB).
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • [AMD] Whats the best BIOS for overclocking on the K8N Neo-2 Platinum

    any one know which one is best.
    thanks

    I have no idea what biosversion that is the best in general for OC the K8N Neo2 P.
    I use 1.5 and it´s the only version I´ve used.
    I believe not many people have tested OC potential for all 6 versions 1.0 - 1.5.
    ( even more if you include the beta´s).
    I would say OC potential depends more of what hardware you are going to use.
    Good RAM and a good CPU stepping are in most cases more important then biosversions.

  • What is the best app for following of the download? I mean how much I downloaded using WIFI and how much 3D download.

    I would like to follow the amount of MB I downloaded and to know how much data was downloaded using WIFI and how much using 3G (internet connection by phone network provider as AT&T and so...).
    Thank you very much for any suggestions.

    Personally I have tried LogMeIn Ignition, Splashtop, and AlwaysOnPC, as well as TeamViewer. Although LogMeIn Ignition is expensive I would also have to say that it is the best one I've tried. Apart from viewing the computer's screen, you can access the files and folders in a standalone file browser interface without seeing the computer's screen, this speeds things up a lot.
    As for security, I'm not too sure, as the website for LogMeIn does not seem to list the details. But as with any other internet based service, like email and social networking sites, an additional account of any sort will increase your vulnerability, even if it's just by that small amount. You can try accessing the computer through a VPN when on a public wifi network for added security. However about the virus, I don't think that is possible... No need to worry about your iPad getting a virus.

  • What is the best replacement for Photoshop from the App Store?

    One of the things I miss is my ability to use Photoshop with earlier OS versions.  I do keep a MacBook Pro to the side of my desktop iMac so I can still use Photoshop.
    My questions is....can anyone suggest a suitable replacement for Photoshop that I can use with the latest versions of OS?  I have already tried Pixelator but it does not have some of the features that I really beed (like drop shadow).
    Thanks in advance.
    -MacPaige

    MacPaige wrote:
    I have already tried Pixelator but it does not have some of the features that I really beed (like drop shadow).
    Could have fooled me!

  • What is the best resolution for a video to instert in Captivate 6 ?

    Bonjour
    Quelle est selon votre expérience la meilleure résolution et taille pour insérer une vidéo (MP4) dans captivate 6?
    je cherche le meilleur compromis pour éviter un temps de chargement trop lent et une modification des pixels si je redimensionne la vidéo.
    Merci de votre aide

    if you're displaying video in flash, you should use flv or f4v files.

Maybe you are looking for