What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

If you want to connect 2 Displays you must do it one with the Minidisplayport and one by HDMI if you have a Retina 13 Inch. i think the old MBP doenst have HDMi Out

Similar Messages

  • What is the best way to set up my new Mac Pro?

    Not wanting to screw up in a process I've not done with a brand new machine before, I'm looking for feedback on my plan for setting my new Mac Pro next week...
    The physical plan is this:
    For RAM, I have four 2GB SDRAM's plus the supplied six 1GB modules. My plan here is to install the 2GB rams into the first four slots and install four of the 1GB modules into the remaining four slots for a total of 12GB's.
    When the cost for 4GB modules gets down to reasonable, I'll buy four of them and bump the current rams down the line which will then give me a total of 24 gigs where I'll stay.
    For my hard drives, I'm installing a 160GB Intel X25-M into the first drive bay
    http://www.intel.com/design/flash/nand/mainstream/index.htm
    using one of MaxUpgrades' 'MaxConnects' kits. I will use this drive for the operating system software and my applications and their libraries.
    Next, into the remaining three drive bays, I am installing three 300GB WD Velociraptors. Mine are the pre-'backplane ready' versions:
    http://www.wdc.com/en/products/products.asp?DriveID=459
    so I have bought these sleds for them...
    http://www.maxupgrades.com/istore/index.cfm?fuseaction=product.display&product_i d=180
    I own one of Sonnet's Tempo SATA E4P cards
    http://www.sonnettech.com/product/temposatae4p.html
    which, thanks to this forum, I now understand, with the correct firmware installed, function well so I will install it and be able to establish hardware RAID. I will create a RAID 0 set with the three Velociraptors and use it to store all of my data files.
    Backup will happen on a 1TB WD 'Caviar Black' external drive connected through one of the Sonnet card's external eSATA ports and using the OS 'Time Machine' software.
    And that's the physical plan. My question is about setting things up. The physical installation part is straight forward and I don't expect any difficulties but I'm wondering what is the best way to install the operating system.
    Do I take a first step keeping the supplied hard drive installed, install the solid state drive into the next drive bay and then transfer the contents from the supplied drive onto the SSD or do I do the complete physical installation process and do a 'C' drive start up and install the OS that way?
    And, do you have any tips/suggestions on setting up the RAID 0 set?
    thanks for the help. I want to do this right.
    JQ

    oh mighty Hatter, I knew you'd have helpful guidance to offer! And thank you. You've confirmed my anxieties about the Sonnet card; kind of a 'too much, too quickly' sort of thing. And it's not that Sonnet's not a good company. Just everything to do with new technologies and the growth curve we all, manufacturers and users, go through when they come out. And, for sure, the new Mac Pro's are new technology; the single biggest forward leap in Apple's top-of-the-line machines for some time far as I can tell. Just reading at Intel's website about the Nehalem's is a joy!
    So, I will proceed now with everything except for the controller card, leaving that 'til later. In the meantime, I think I'll just happily run with the four hard drives all running independently. No software RAID. I know just those, the SSD boot drive plus Velociraptor trio's going inside of a 2.66ghz 8-core Nehalem Mac Pro is going to be a working pleasure. Heck, this way, I'll get settled in and used to the machine's speed, have a great time doing so and then, in however many months, I can jump into spending another chunk of money on an excellent RAID card, RAID card's dear Barefeats will have tested and reviewed for us, set up my RAID 0 set and head of to those new races watching my computer leap for joy! Could be that, by then, the cost of Intel 160GB X25-M's will have dropped enough that I can afford to go for a second and have a two SSD RAID 0 boot drive... Yummy!
    Thanks for the help. Like I say, I knew there was useful guidance hanging on some limb within your personal kit, (otherwise referred to as your mind)!
    Interesting to read about the problems people have had with Sonnet's 2.17 update in PPC's... In this computer, my PowerMac G5 dual 2.7ghz, I have a Sonnet 'Tempo Sata X4P' controller card. I downloaded and installed 2.17 and got the same troubles; no cut, no paste, no 'drag and drop' etc. It was miserable.
    Mine, fortunately, magically corrected after running the 'permissions verify and correct' process in Disc Utility and, after a restart, all was back to almost normal but for one exception; the Sonnet card was no longer present or functioning including the four eSATA ports out the back. (I ran Tech Tools Pro 5's repair suites first but, and who knows why, it didn't correct the problem...) This one was absolutely in the 'who knows what the f_'s going on and why it disappeared but did' class.
    Oh, the other remnant is that, when the computer goes into sleep, after about five minutes, the fans rev up, and up, and the computer's frozen; only access is to do a forced shutdown pressing and holding the power button, so I've had to adopt a 'shut down whenever leaving it for more than fifteen minutes' approach to this dear friend. Once I've fully moved into and established my new one (which should arrive today, by the way... Yippeee!!! Can't wait!), I'll do a complete restoration on this one including taking out the Sonnet card. Usually, I sell my old Pro's but, this time, I'm going to keep this one as a back up and just general second computer for times I might need it. It has been such a great and dependable machine. Keeping it seems the right thing to do.
    thanks Hatter. I'll let you know how things go, including what happens with the SSD. I don't have speed test software so I won't be able to track it's performance like that guy in the post you gave me did...
    JQ
    ps- Gotta love that ILLogic fellow eh? Talk about not getting the essence!

  • What is the best way to connect my new MBP to monitor - DVI, VGA or HDMI

    What is the best way to connect my new MBP to a computer monitor?  DVI, VGA or HDMI?  Thanks

    I recommend the Apple MiniDisplay Port to DVI adaptor.  I would avoid VGA.  MiniDisplay Port to HDMI will work as well (3rd party).
    http://www.apple.com/search/?q=dvi%20adaptor&section=mac&geo=us

  • What's the best way to connect the audio out of my Mac to my stereo receiver?

    I want to listen to my mp3 collection through my home theatre stero receiver.
    I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
    I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
    I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
    The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
    I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
    I even hear these flaws when I listen to headphones through the headphone out of my mbox.
    Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
    I got this one from monster thinking it should work. No dice.
    So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
    Why might I be getting these clipping distoritons?
    any advice would be fantastic

    It depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
    http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
    However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
    http://www.apple.com/itunes/airplay/
    I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
    http://www.apple.com/airportexpress/
    You can even find refurbished ones on Apples website for about $79.

  • What's the best way to connect latest iphone to 2010 Mini CooperS  for hands free

    What is the best way to connect the latest iphone to a 2010 mini Cooper S for hands free operation?

    Patrick Hindman wrote:
    Does anyone have any suggestions of what kind of hardware I should purchase to do this? Basically, I want a jam-up iTunes server that serves everything to each device (sorry, should have worded it this way sooner! . Maybe a MacMini server would do it? Or possibly just a Mac Mini or would Time Capsule do something like this?
    i use an old G4 Mac Mini running 10.5 Leopard, and it's on 24/7
    it runs in headless mode (ie no monitor) and i remotely administer it using remote desktop (or logmein if i'm out the house).
    i have a 1TB WD Mybook hanging off it connected via Firewire and that stores all my itunes content.

  • What is the best way to connect a MacBook Pro to my HiFi system ?

    Hi,
    I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
    Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
    My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5  CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ? 
    I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
    Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
    Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
    Thanks in anticipation of some advice.

    What is the best way to connect a MacBook Pro to my HiFi system?
    Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
    The Mac's  analog audio in/out ports doubles as a optical in/out ports.
    The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
    Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
    To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
    Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
    I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
    It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
    If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
    If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

  • What is the best way to connect MBP 13" - (non retina) to HDMI TV input

    What is the best way to connect MBP 13" late 2012 - (non retina) to HDMI TV input
    ...To get Video and Audio? With one cable ...
    I'm seeing that the "rocketfish" adapter is not handling the job (from these forums).
    I enjoy watching youtube videos, hulu, etc on the big screen through my laptop. The other Windows laptops I'ved had from Sony, HP, Dell, all had HDMI and was easy peasy.
    I don't have the patience to buy and return 10 different types of adaters (nor would Best Buy appreciate that)
    Thank you!

    Look for something like this:
    http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADY9 I/ref=sr_1_6?ie=UTF8&qid=1356715728&sr=8-6&keywords=cable+displayport+to+hdmi
    Ciao.

  • What is the best way to connect PumpWorks to Labview? DDE or OPC

    What is the best way to connect quizix PumpWorks to labview?
    PumpWorks share data using Dynamic Data Exchange (DDE),what is the best way? To use an OPC Server betwen labveiw and pumpworks or  DDE?
    Solved!
    Go to Solution.

    Hi.
    If the instrumet can communicate with an OPC server I think both methods are fairly equal.
    There is a chance that you might have to reinstall LabVIEW without OPC server if you choose DDE, as it is known that it might conflict with the DDE server.
    http://zone.ni.com/devzone/cda/tut/p/id/4531
    http://zone.ni.com/devzone/cda/tut/p/id/7450
    -Tom

  • What is the best way to connect my ipad to the high-speed Internet connection in a hotel room

    what is the best way to connect my ipad to the high speed inernet connection in a hotel room

    every connection is a bit different. Generally, connect to the wifi, then you may need to open Safari, and may even need to try to get to one of your bookmarked pages to trigger the 'agree to our terms' page to come up.
    As to it kicking you off every so often, there are sometimes glitches with the wifi on iPads, you can also be subject to any programming the hotel has. Like I've noticed various places that only allow you to log on for a period of time before having to relogin.
    most hotels have 1-800 numbers, so you can always try calling that to see if their tech support has any tips for the frequent disconnection issue.

  • What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

    What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

    It should be possible to network them easily.
    Ethernet will be the most straightforward. There is no question that you can plug both Macs into a normal network and they can share files if you turn on File Sharing.
    The iMac has a Gigabit Ethernet port, and if the G4 also has Gigabit Ethernet, that will be a very fast connection through a gigabit-capable Ethernet cable or router. Otherwise both can use the slower Ethernet speeds with no problem.
    You can also network the two machines via a FireWire 800 or FireWire 400 cable if necessary, and use File Sharing that way too. Finally, you can put one Mac into FireWire Target Disk Mode, which turns it into a hard disk that the other Mac can see, but this is the least flexible since one machine goes out of service, and it's probably no faster than Gigabit Ethernet.

  • What is the best way to connect macbook running sling adapter to the tv

    what is the best way to connect macbook running slig adapter content to the tv

    Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

  • Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

    Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?

    Much depends on the available connectivity  of your television.
    If it has HDMI input available, all you will need is a minidisplayport to HDMI adapter, and an HDMI cable long enough to place the Mac in the desired proximity to the TV. The adapter is avaialble from the Apple Store online.
    Provided the HDMI input on the television supports sound, and the model of your MBA supports it as well, make suree that your adapter is also supportive of sound, otherwise you will need to run separate cabling from the headphone jack of the MBA to TV sound input or external speakers.
    This is a somewhat specific answer to a question without any requisite detail. You don't indicate the model or type of inputs on your TV, nor do you indicate the model/generation of MBA you have.

  • HT5304 what is the best way to connect my imac wireless with airport express or directly plugged into airport unit

    what is the best way to connect my imac to internet via airport express. wireless or ethernet plug to airport? thanks

    Hello quinstar,
    It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
    HT4356 Can I use personal hotspot as wifi to connect printer?
    https://discussions.apple.com/thread/4007254
    Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • What is the best way to connect macbook air to present power point presentations

    What is the best way to connect macbook air to present power point presentations

    Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

  • What Is The Best Way To Connect Ipod To Stereo Reciever With High Quality?

    I recently purchased an 80 gig and am a newbie. I ripped all my music at around 280kbps to retain good audio quality when playing in my car and home theatre system. There are tons of accesories out there (docks, jacks, etc) which is the highest quality to connect my Yamaha receiver. I would think a connection to the bottom of my ipod would be of a higher quality rather than using the headphone jack. Any suggestions would be great. I was thinking about using the monster itv link but mostly for audio. thanks

    OK - So now that you have all completely ignored the original question - in hopes of proving your manly-hood....
    Does anyone have an answer to the original question....
    "What is the best way to connect to a high end home stereo to retain the best sound?"
    For sure any connection going through the headphone jack will be a big step back - enough so that you would easily hear a sound quality loss in doing so.
    For the few of you who would like to argue/bicker/rant on the nominal sound quality loss....keep on doing so, but for those who actually have some respectable advice we would love to hear it.
    For the record, I tend to hear just outside the normal human auditory range...
    To help myself put it to rest already... a few years back I decided to conduct my own little listening test.
    I took 6 different common ripping modalities (from lossless - to - 128kbps in both MP3 & AAC.... then transfered all of them in order to a blank. Used the same song for each - the song chosen opened with a few clean crisp bars of high freq. music, followed by an instant explosion/drop into a tight & low bassline.
    The final cutoff that was achieved before I was unable to detect an audible difference was 198 VBR AAC. Having convinced myself that there was the ever sooooooo slight difference b/t 198 & 256, I went with my current ripping status of 256.... Just incase my audible range should become finally honed with age (yeah, like that is really going to happen) !
    This test was run over a Yamaha DSP receiver, running at a constant 110w per channel (w/a max of 220w). The speaker setup was a full surround set of Klipsch Reference Series..... each speaker housing 2 x 6.5 woofer (each housing 2 x 1" Titanium tweeters) And sitting along side the 5 surrounds was/is a 150w continuous 12in. Subwoofer.
    Now I am hardly stating that I have hearing as good as some of you extremely technically profound music enthusiasts out there, but for the majority of people making comments about sound quality, and lack there of - when played over a $120/40w Audiovox radio.... I'm sorry, but I would have to side on that of......"Hogwash, that you can hear a difference!"
    So.... if possible would someone please offer some advice on a dock or cable connection that will allow us to enjoy the music we ripped at whatever
    so-called range we did!
    For those interested in seeing who could hit the further bullseye with their eyes closed, You win!!! Now can you help us?
    MBP   Mac OS X (10.4.9)  

Maybe you are looking for