What is the best way to create the layout for a single page website in Adobe Muse?

I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?

I know how to create a website but will that help me create a single page website? Below I will leave a demo of what I want. I want it to only have one page but multiple sections. What is the easiest way to create a single page website like the demo below?
Demo Website

Similar Messages

  • What is the best way to create shared variable for multiple PXI(Real-Time) to GUI PC?

    What is the best way to create shared variable for multiple Real time (PXI) to GUI PC? I have 16 Nos of PXI system in network and 1 nos of GUI PC. I want to send command to all the PXI system with using single variable from GUI PC(Like Start Data acquisition, Stop data Acquisition) and I also want data from each PXI system to GUI PC display purpose. Can anybody suggest me best performance system configuration. Where to create variable?(Host PC or at  individual PXI system).

    Dear Ravens,
    I want to control real-time application from host(Command from GUI PC to PXI).Host PC should have access to all 16 sets PXI's variable. During communication failure with PXI, Host will stop data display for particular station.
    Ravens Fan wrote:
    Either.  For the best performance, you need to determine what that means.  Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables?  If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
    You want to located the shared variable library on whatever machine is more critical.  That is probably each PXI machine, but only you know your application.
    Ravens Fan wrote:
    Either.  For the best performance, you need to determine what that means.  Is it more important for each PXI machine to have access to the shared variable, or for the host PC to have access to all 16 sets of variables?  If you have slowdown or issue with the network communication, what kinds of problems would it cause for each machine?
    You want to located the shared variable library on whatever machine is more critical.  That is probably each PXI machine, but only you know your application.

  • Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    Buying more hard drive space is a very valid option, here.  Editing takes up lots of room, you should never discount the idea of adding more when you need it.
    Another possibility is exporting to MXF OP1a using the AVC-I codec.  It's not lossless, but it is Master quality.  Plus the file size is a LOT smaller, so it may suit your needs.

  • Best way to create special prices for a single BP?

    Hi Experts,
    Can anyone suggest the best way to do the following?   I have a single BP who will ALWAYS purhcase at 10% above the landed cost (or last purchase price of an item) for any item in SAP B1.   I don't see how I can implement this through Special Prices.   Is there any other way?
    Regards
    Geoff

    Hi Gordon
    I did consider this method but it occurred to me that whenever we create a new item (or indeed the last purhcase price of an item changes) then the special price will not change.   We also have a item list of over 50,000 items and I have always found that adding special prices for a business partner for all 50k items increases the sizes of the database considerably.
    I am looking for a more dynamic approach that will change as we add new items or last purhcase price changes.  
    Could this be done through the addition of a new price list perhaps which is based on the last purchase price?   I don't fully understand what the factor does but I presume it will create a new price based on another price list only higher or lower?
    Regards
    Geoff

  • What is the best way to create a bookmark for a returning user??

    Hello all... hello again Steve...I am back with another question- what is the best way to implement a bookmark system so returning users can pick up where they left off in an AW lesson? I have tried the usual internet searches, always do, but the few samples/answers I have found were AW5, not much help...
    I have a dozen or so maps attached to my framework, I would like a user to return to the last map he viewed before closing. (My AW is communicating fine with an Access database, so if passing a variable to Access and then back to AW when the lesson starts is on the right track, let me know...) If the answer here is too complicated, maybe nudge me in the right direction and I will dive back in.
    Thanks in advance to anyone who has some guidance, I really do appreciate it!
    Terry

    Try this outline, see if it helps ...
    Grab a reference to the Map as you enter it, then save that to the database when you leave.
    You want something that will give you the equivalent to a page number - if you have 7 maps hanging off the Framework, and the user is in the 6th map when he exits, you want to save the number 6.
    There are scores of ways to do this, but probably the easiest is just to attach a calc to each map that has this code
    (I don't have Authorwar handy to check syntax, so you should check!)
    BookMarkPage = ChildIDtoNum(IconParent(IconID), IconID) <-- tells Authorware to return the "page number" of the current map
    Save BookMarkPage to your Access database on exit .
    On return, read the bookmark back into BookMarkPage, ask the user if he wants to return to bookmark. If yes, use a calculated navigation that uses
    ChildNumToID(@the name of your Framework or it's ID, BookMarkPage)
    Note that you could wrangle something similar by saving the IconID of your Map, or the IconTitle, but both of these can break if you ever update your file by adding or removing pages, renaming them etc. With this method, all you need is a simple page count check that ensures that you are not trying to nav to a page number that does not exist (use IconNumChildren).
    Steve

  • What is the best way to create illustrator files for frames created in an InDesign layout?

    Is there a quick way to do that or do i need to note the size of each frame in InDesgin and then input that into the dialog in illustrator. It seems like a waste of time. Is there a better way?
    I am new to InDesgin. What I'd like is a way to automatically generate blank illustrator files  to fill in the graphic frames in my layout.
    Thanks,
    John

    I have no existing Illustrator files for the project. I'm tring to use InDesign to create a rapid protoype. I may be working backward from what is expected.
    If I could generate blanks that are the correct size that would be an easy way to get started on them, but copying the sizes to the new document dialog box in Illustrator is not a big deal either.
    I figured that if i could create an Illustrator blank from InDesign that would get me started in illustrator quickly and also place the new file in the frame.

  • What's the best way to create zoomable map for iOS by using Flash?

    We got a big location map that allows user to zoom in and out and do the panning but the image of the map is not very smooth when you  pan it in iOS (Android is ok) so is there a way to fix this problem?
    thanks!

    Which one you use might depend on the nature of the picture, like, a picture with lots of flat colored areas will come out a lot smaller as a lossless PNG than as a 100% JPEG. It would be interesting to try an 8 bit or 16 bit PNG, see if that makes it use less GPU memory. JPEG is usually 24 bit, and it or a 24 bit PNG should take the same amount of GPU memory.
    There is a chance that AIR is using 32 bit throughout on iOS, so it won't matter what the original image was if that's the case, just the width and height would determine the amount used.
    The smoothing setting is more about whether you're going to scale the image, which I guess you would be if you want the image to be scaled down. If you could have a smaller version that the user then touches to go immediately to the larger version, both could be set to have no smoothing, which may improve performance.

  • Whats the best way to create USER variable in BI Apps?

    I have just installled BI Apps and am trying to integrate EBS R12 with OBIEE 11g
    We have USER variable already defined in the BI Apps rpd.
    In EBS Security context init block i need to define USER variable, but when i define it... it says *'USER' has already been defined in the variable "Authentication"."USER"*
    Whats the best way to create USER variable for EBS Security Context init block?
    1) Delete the existing USER variable and then define a new one ( in this case all the places where USER variable is getting used in the rpd would become <missing>)
    And i was told that it should not be done.
    Let me know how can it be done.
    Thanks
    Ashish

    Disable existing Init block and then double click on USER variable and hit on NEW... button to create new Init block
    Thanks
    Edited by: Srini VEERAVALLI on May 1, 2013 4:18 PM

  • The best way to make proxy files for editing?

    Hi,
    What is the best way to create proxy files for editing? I'm thinking Apple ProRes 422 (Proxy). The original material is DVCPRO HD 1080i50, shot on Panasonic P2 cards, and copied on to hard drives. But as there is about 400 hours of it, I desperately need to find a clever way to make smaller proxy files for editing.
    I would also like to make the proxies at a smaller resolution than 1080i for the editing process.
    I guess it's possible to import the media and then batch export it to the proxy format, but Is there a better way?

    I'm not able to ingest the material directly from the P2-folders as ProRes 422 (Proxy). No matter how much I change the import settings in "Log and transfer", it still ingests as DVCPRO HD 1080i50.
    Correct. DVCPRO HD P2 can only come in as DVCPRO HD. You can't transcode it. AVCIntra P2 is what you can bring in as ProRes. (Sorry Tom).
    I can of course transcode it form there to the proxy format and delete the ingested files,
    Why? Why do that? You have ingested all the files, right? You ALREADY HAVE THEM...right? Why not work with them? You obviously have the room (20TB). Why import all this, then now take the days it would require to make proxies?
    Making the ProRes-proxies directly from the P2-material seems more logical, or isn't it?
    DVCPRO HD P2 cannot come in as anything else, so the offline/online workflow for them doesn't work unless you import it all, then transcode to a smaller format...but then need to keep the originals online to relink to when you are done. If you wanted to do an offline/online, you needed to research this better...or test it...before you shot your hundreds of hours only to find that what you want to do won't work.
    Shane

  • Best way to create customized counter for slideshow.

    Hello everone. I am stuck on this one. What is the best way to create a customizable for the slideshow widgets. Im looking to create circles or boxes that change color in relation to the picture in the slideshow. I am sure that I have seen it on a muse site before, but just can't figure how to get it done. Thanks!

    Have you tried using:
    Effect > Text > Numbers ?
    You could also have found that answer by searching for "numbers" at the Community Help site. It's really a great resource in addition to the online help files. Try it out!
    (It would have been the first result returned from the search...)
    http://www.adobe.com/support/aftereffects/

  • Best way to create a UI for a Composite app

    Hi all,
    What is the best way to create a UI for a Composite app that we are developing using CAF and GP.
    1) WebDynPro Callable Object that implements GP Interface.
    2) Consume the Application services(exposed as web services) in WebDynPro app
    3) Creating a WebDynPro Model for the CAF Services.
    4) Create a WebDynPro Application Callable Object (If yes how can we map the input and output params b/n WebDynPro app CO and CAF Application service).
    Plz do remember we are using GP here.
    Thanks in advance,
    Best Regards,
    Sudheer.

    Hi,
    You can use Web Dynpro or Visual Composer for designing UI for your CA.
    1) WebDynPro Callable Object that implements GP Interface.
    You can use Web Dynpro Component CO to use a single Web Dynpro component in your GP Activity.
    4) Create a WebDynPro Application Callable Object :This is for entire Web Dynpro Application(multiple components).
    2) Consume the Application services(exposed as web services) in WebDynPro app :
    3) Creating a WebDynPro Model for the CAF Services.
    For example, in updating operations first we have to get the existing data from Database.For getting this data you can use application services in your Web Dynpro component.Later expose this WD component as CO insert in a GP activity.
    For creating operations, you can use Web Service CO(Application Service)  directly in GP Activity.
    These links are useful for you.
    [link1|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00c07d0-61e0-2a10-d589-d7bc9894b02a]
    [link2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b99341-60e0-2a10-6e80-b6e9f58e3654]
    [lnk3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1078e3b0-ec5d-2a10-f08a-c9b878917b19]

  • What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

    I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
    I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
    single month and year.
    I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
    how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
    practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
    able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
    For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
    resultset on two fields:
    Start Date - The date the patient was assigned to the practice. This field is never null or blank.
    End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
    leaves the practice, the date the patient left is populated in this field.
    Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
    start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
    AND
    end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
    selected)
    Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
    how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
    John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
    Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
    Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
    Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
    August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
    Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
    this:
    Patient Name              
    Months Assigned
    John Doe
    June 2012
    John Doe                     
    July012
    John Doe                     
    Aug 2012
    John Doe                     
    Sept 2012
    John Doe
    Oct 2012
    Sally Doe                     
    Aug 2012
    Sally Doe                     
    Sept 2012
    Sally Doe
    Oct 2012
    Sally Doe                     
    Nov 2012
    Sally Doe
    Dec 2012
    Jimmy Doe                  
    July 2012
    Jimmy Doe
    Aug 2012
    Jimmy Doe
    Sept 2012
    From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
    June 2012 - 1
    July 2012 – 2
    Aug 2012 - 3
    Sept 2012 - 3
    Oct 2012 - 2
    Nov 2012 - 1
    Dec 2012 - 1
    The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
    be the y axis).
    Does this sound like the best approach?
    If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
    I do not have permissions to create SPs or Functions within the database but I can create temp tables.
    I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
    Any advice or help is greatly appreciated.

    Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
    Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want. 
    Doing a cross  join between my original resultset that had two dates:
    08/27/2010
    10/24/2011
    and a calendar table that has 24 rows (each month for a two year period)
    my new resultset looks like this:
    I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
    You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
    the Months Assigned value must be greater than or equal to the date assigned value.
    Any advice would be appreciated.

  • What is the best way to create business documents in CRM

    Hi All,
    What is the best way to create business documents like contract, sales order, debit memo etc in CRM ? Unlike R3 we can't use our good old BDC with recording. Moreover for most of them although there are Business Object but no BAPI to creation so what is the way ? I found in SDN there are two MAGIC Function module CRMXIF_ORDER_SAVE. Do I need to that alawys ?
    Is it nees to via IDoc and cannot be done just by calling from ABAP program ? The input parameter of the FM is a complex deep structure.
    Please help.

    Ashim,
    Try looking at the program:
    CRM_TEST_ORDER_MAINTAIN
    I think that should help you figure out the parameters.
    Good luck,
    Stephen

  • What is the best way to create a photo gallery?

    Hi,
    I want to create a photo gallery in Dreamweaver without using any pre-built "web gallery" function. What's the best way to swap the images when I click the "next" button? Do I create a new Dreamweaver page for each photograph? Is there a more efficient way to do it than that?
    Thanks,
    Gordon

    Is there a more efficient way to do it than that?
    Most definitely.  With scripts.
    57+ Free Galleries, Slideshows & Lightbox solutions:
    http://www.1stwebdesigner.com/css/57-free-image-gallery-slideshow-and-lightbox-solutions/
    20 Best jQuery Slideshow Scripts
    http://graphicalerts.com/20-best-jquery-slideshow-image-photo-gallery-plugins/
    If you're a photographer or managing a large collection of images, look at JAlbum.
    Download the software.  Drag & Drop your images/folder of images into the work space.  Hit create album.  In a few seconds, jAlbum generates your HTML pages and thumbnail images for you.  A real time saver with plenty of customizable skins to choose from.
    Download: http://jalbum.net/software;jsessionid=qkhdjzieqjtg1rz4x2anjlk5d
    Skins:  http://jalbum.net/skins
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • What is the best way to create a database schema from XML

    What is the best way to create a database schema from XML?
    i have  a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
    There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
    Taking my C# further

    Hi Saythj,
    When mentioning "a database schema from XML", do you mean the
    XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
    Create an XML Schema Collection basing on your complex XML, you can find
    many generating tools online to do that.
    Create a Table with the above created schema typed XML column as below.
    CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
    Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

Maybe you are looking for