What is the best way to extract/consume HR data to and from Peoplesoft?

I have to do integration between Peoplesoft and Oracle ERP to send HR data from Peoplesoft to Oracle HRMS. I will use Oracle Fusion Middleware for building the interface. I don't have much experience in working with Peoplesoft tools, like PeopleTool, App Engine, Integration Broker, Component Interface and Oracle adapter for Peoplesoft. Can somebody please let me know what is the most popular or recommended or best way to extract HR data from Peoplesoft.
The second interface will consume some HR data from Oracle. Once again I need to know different ways to insert data into Peoplesoft.
I appreciate if you can share your experience for the above two scenarios.

If you plan on buying a apple laptop you have two options. You can use time machine or pull the data off of it directly and put it onto the external. I advise the second choice. This way you do not have stuff that you dont need filling up the space on your new drive. Get your applications, music, documents, photos, videos and perhaps downloads and desktop; Put all of these on your external. And then reinstall osx onto your drive.
*** If buying a windows machine next check the format of the drive in disk utility. You will need a program called Paragon NTFS to format the drive window compatibility. You have to pay for the free version but can download a trail version for free.
http://www.paragon-software.com/home/ntfs-mac/
Did i leave anything unanswered?

Similar Messages

What is the best way to kill/stop a data load?

Hi.
What is the best way to kill/stop a data load?
I have a data load from my QA R/3 system that is extracting 115.000.000+ records. The problem is that the selection in the function module used in the data source does not work, and the problem was not detected because of the nature of the data on the development system.
I could kill processes owned by my background user (on both R/3 and BW) but I risk killing other loads, and sometimes the job seems to restart if I just try to kill processes. If I remove transactional RFCs in SM58 the load does not terminate; I only skip one or more datapackages. I have also tried to change the QM-status in the monitor to red, but that does not stop the load either...
So isn't there a nice fool-proof way of stopping a dataload?
Best regards,
Christian Frier

Hi,
There r 2 ways to kill the job.
One is using transation RSMO locate the job and display the status tab double click on the yellow light that is shown on the line total, a pop will come 'set overall status ' is displayed select the desired status that is red and save it. Then return to the monitor page and select the header tab double ckick on the data target right click and then goto 'manage',there should be request sitting there probably with yellow lights , highlight the line with the faulty request click the delete button then click refresh button.
Second is goto SM37 and click on the active selection and enter the jobname and then click excute the particulr job should appear highlight the jobname then click on the stop iconthat appears on the taskbar( 3 rd from left)
hope it is clear.
Regards-
Siddhu

What is the best way to do a 10.8 reinstall and keep all of my data?

What is the best way to do a 10.8 reinstall and keep all of my data?

Boot to the recovery disk and reinstall the os. That said you do have a back up just in case (I trust)?

What is the best way to manage tasks? I have moved from outlook and only have mail and ical

What is the best way to manage tasks. I have moved from a pc with outlook and have lost 'tasks' in that programme. Do I have to rely on ical or can I download an app to manage business tasks?

iCal does have reminders but its implementation of tasks is pretty wimpy. There are a number of programs that are better geared to the job. I was a level 4 procrastinator until I discovered Getting Things Done and for me Things is perfect. It lets me handle projects which are dependent upon multiple tasks in a no-nonsense easy fashion. Much less expensive and really not much more than a list maker is Wunderlist. Thankfully there's a ton of shareware offerings - check out MacUpdate.com and see what works for you.

I am getting pop ups on safari and firefox lately and am worried i may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

I am getting pop ups on safari and firefox lately and am worried I may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/

What is the best way to stack DAQ aquired data in labview?

I'm developing an application to work with an M-series daq card and labview 8.5 to output a signal and then record on 8 differential inputs for a short period of time (~10 ms). I need to stack my data, however, because the incoming signal will be very, very small, even after amplification. So basically i'm running a slightly modified version of the multifunction Synch AI-AO.vi (included with the install of daqmx). What is the best way for me to rerun this vi a set number of times and add new data directly to the old data (not cat-ing or anything, like |sample 1 of run 1| + |sample 1 of run 2| = stacked stample 1).
A slightly modified version of the mutlifunction synch AI-AO.vi is attached.
Attachments:
des_v2_Multi-Function-Synch AI-AO.vi ‏143 KB

Hi LSU,
see attachment on how to "stack" several measurements. I simply add the waveforms and use a shift register to keep the last iterations value.
Writing to files in each iteration is extremly CPU consuming - especially with express vis. Using for loops for just one iteration is "senseless". You could enable the conditional terminal of the for loop to realize your stop feature.
For your message 4:
Have you ever tried all the things you asked for? Sometimes it's easiest to just try&error
And for the "n=n+x" question: It really helps to take the free online courses offered by NI!
Message Edited by GerdW on 11-11-2009 06:27 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
des_v2_Multi-Function-Synch AI-AO.vi ‏128 KB

What is the best way to double buffer in this case and how to do it....

currently I have
public class Frame1 extends JFrame{
//inside this class I call up circle class, rectangle class, etc.... to draw
}I am making a "paint" program, and I have individual classes to handle the paint methods heres an example:
abstract public class Shape {
    public Shape() {
    public abstract void draw(Graphics g, Color c, int x, int y, int width,int height);
}and then....
public class Circle extends Shape{
    public Circle() {
    public void draw(Graphics g, Color c, int oldx, int oldy, int newx, int newy) {
        g.setColor(c);
        g.drawOval(Math.min(oldx, newx), Math.min(oldy, newy), Math.abs(oldx - newx), Math.abs(oldy - newy));
}There is also a Rectangle class, line class.... etc! So my question to you is the following... what is the best way to implement double buffer in the individual classes? And how to do it?? And also.... the drawings should be kept inside a jPanel.
Any bit of help is much appreciated Thank you!!

You don't need to do double-buffering. Swing
components are double-buffered by default. Just make
sure you override paintComponent() and not paint().
And even if you had to, why would there be any
difference in implementation for your classes whether
they paint to on- or off-screen graphics?I need to override paintComponent()? what if I don't...
I am using JBuilder2005 and they automate somethings for me. So thats how they did it when they created the application they did this....
public class Frame1 extends JFrame{
/*** all my code here***/
public class Application1 {
    boolean packFrame = false;
     * Construct and show the application.
    public Application1() {
        Frame1 frame = new Frame1();
        // Validate frames that have preset sizes
        // Pack frames that have useful preferred size info, e.g. from their layout
        if (packFrame) {
            frame.pack();
        } else {
            frame.validate();
        // Center the window
        Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
        Dimension frameSize = frame.getSize();
        if (frameSize.height > screenSize.height) {
            frameSize.height = screenSize.height;
        if (frameSize.width > screenSize.width) {
            frameSize.width = screenSize.width;
        frame.setLocation((screenSize.width - frameSize.width) / 2,
                          (screenSize.height - frameSize.height) / 2);
        frame.setVisible(true);
        try {
            jbInit();
        } catch (Exception ex) {
            ex.printStackTrace();
     * Application entry point.
     * @param args String[]
    public static void main(String[] args) {
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                try {
                    UIManager.setLookAndFeel(UIManager.
                                             getSystemLookAndFeelClassName());
                } catch (Exception exception) {
                    exception.printStackTrace();
                new Application1();
    private void jbInit() throws Exception {
}

What's the best way to merge, restore or reconstruct iPhoto and Aperture libraries to resolve images that are not found/offline?

Hey there, Apple Support Communities.
To start, I'm working on a MBP Retina 15" with a 2.3GHz i7 processor and 16 GB of RAM. 10GB free on a 256GB SS HD. Attached are two external HDs - one 1TB Western Digital portable drive from 2011, one 2TB Porsche LaCie non-portable drive from 2013; both connected via USB. All photo libraries in question are on the external drives.
I have Aperture 3.5.1 and iPhoto 9.5.1. I prefer to work in Aperture.
The Issue(s)
Over the years, I have accumulated a number of iPhoto libraries and Aperture libraries. At one point, I thought my WD drive was dying so I purchased the LaCie and copied all libraries over the the LaCie drive. (Turns out, there's probably an issue with my USB port reading drives, because I can once again see the WD drive and occasionally I can't see the LaCie drive.)
So now I have old version of some libraries on the WD drive, and new versions on the LaCie drive.
When I was moving things, I ran the software Gemini to de-dupe my iPhoto libraries. Not sure what effect that may have had on my issues.
In my main Aperture library and in some iPhoto libraries, I get the image-not-found badge or exclamation point. I've dug through the hidden Masters folders in various libraries to find the original image. In some cases, I have been able to find the original image, sometimes in a different version of the iPhoto library.
My Question(s)
1. For Aperture libraries that have missing originals, is there some magical way to find them, or have they just disappeared into the oblivion?
2. For iPhoto libraries that have missing originals and I have found the original in another iPhoto library, what is the best way to proceed?
3. Are there quirks to merging iPhoto and Aperture libraries (by using the Import->Library) feature that I should be aware of?
TL;DR: Too many iPhoto and Aperture libraries, and not all the original pictures can be found by the libraries anymore, though some originals still do exist in other libraries. Steps/process to fix?
Thank you! Let me know if you need add'l info to offer advice.
With appreciation,
Christie

That will not be an easy task, Christie.
I am afraid, your cleaning session with Gemini may have actually removed originals. I have never used this duplicate finder tool, but other posters here reported problems. Gemini seems to replace duplicate original files in photo libraries by links, and this way, deleting images can cause the references for other images to break. And Aperture does not follow symbolic links - at least, I could never get it to find original files this way, when I experimented with this.
1. For Aperture libraries that have missing originals, is there some magical way to find them, or have they just disappeared into the oblivion?
You have to find the originals yourself. If you can find them or restore them from a backup, Aperture can reconnect them. The reconnect panel can show you, where the originals are supposed to be, so youcan see the filename and make a Spotlight search.
For iPhoto libraries that have missing originals and I have found the original in another iPhoto library, what is the best way to proceed?
Make a copy of the missing original you found in a folder outside the iPhoto library. You can either open the iPhoto library in Aperture and use "File > Locate Referenced file" to reconnect the originals, or simply reimport them. Then Lift&Stamp all adjustments and metadata to the reimported version.
See this manual page on how to reconnect originals: Aperture 3 User Manual: Working with Referenced Images (the paragraph: Reconnecting Missing or Offline Referenced Images)
Are there quirks to merging iPhoto and Aperture libraries (by using the Import->Library) feature that I should be aware of?
References images will stay referenced, managed will remain managed. You need to unhide all hidden photos in iPhoto - this cannot be done in Aperture.
and not all the original pictures can be found by the libraries anymore, though some originals still do exist in other libraries. Steps/process to fix?
That is probably due to Gemini's replacing duplicate originals by links, and your best cause of action is to fix this before merging the libraries. Reconnecting can be done for your iPhoto libraries in Aperture.

What is the best way to get rid of troyan virus and safari virus?

what is the best way to get rid of viruses on my macbook? the viruses are causing popups and saying that the device is infected.

ds store wrote:
ClamXav is only a scanner, it can't remove the MacDefender malware.
Yes, it can. ClamXav scans and quarantines it. It was updated.
http://www.reedcorner.net/news.php/?p=98
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

What's the best way to handle all my data?

I have a black box system that connects directly to a PC and sends 60 words of data at 10Hz (worse case scenario). The black box continuously transmits these words, which contain a large amount of data that is continuously updated from up to 50 participants (again worst case scenario)
i.e. 60words * 16bits * 10Hz * 50participants = 480Kbps. All of this is via a UDP Ethernet connection.
I have LabVIEW reading the data without any problem. I now want to manipulate this data and then distribute it to other PCs on a network via TCP/IP.
My question is what is the best way of storing my data locally on the interface PC so that I can then have clients request the information they require via TCP/IP. Each message that comes in via the Ethernet will relate to one of the participants, so I need to be able to check if I already have data about that participant - if I do then I can just update it, if I don't I need to create a record for the participant, and if I havn't heard from one for a while I will need to delete it. I don't want to create unnecessary network traffic. I also want to avoid global variables if possible - especially considering that I may have up to 3000 variables to play with.
I'm not after a solution, just some ideas about how to tackle this problem... I thought I could perhaps create a database and have labview update a table with the data, adding a record for each participant. Alternatively is there a better way of storing all the data in memory besides global variables?
Thanks in advance.

Hi russelldav,
one note on your data handling:
When each of the 50 participants send the same 60 "words" you don't need 3000 global variables to store them!
You can reorganize those data into a cluster for each participant, and using an array of cluster to keep all the data in one "block".
You can initialize this array at the start of the program for the max number of participants, no need to (dynamically) add or delete elements from this array...
Edited:
When all "words" have the same representation (I16 ?) you can make a 2D array instead of an array of cluster...
Message Edited by GerdW on 10-26-2007 03:51 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

What's the best way to delete 2.4 million of records from table?

We are having two tables one is production one and another is temp table which data we want to insert into production table. temp table having 2.5 million of records and on the other side production table is having billions of records. the thing which we want to do just simple delete already existed records from production table and then insert the remaining records from temp to production table.
Can anyone guide what's the best way to do this?
Thanks,
Waheed.

Waheed Azhar wrote:
production table is live and data is appending in this table on random basis. if i go insert data from temp to prod table a pk voilation exception occured bcoz already a record is exist in prod table which we are going to insert from temp to prod
If you really just want to insert the records and don't want to update the matching ones and you're already on 10g you could use the "DML error logging" facility of the INSERT command, which would log all failed records but succeeds for the remaining ones.
You can create a suitable exception table using the DBMS_ERRLOG.CREATE_ERROR_LOG procedure and then use the "LOG ERRORS INTO" clause of the INSERT command. Note that you can't use the "direct-path" insert mode (APPEND hint) if you expect to encounter UNIQUE CONSTRAINT violations, because this can't be logged and cause the direct-path insert to fail. Since this is a "live" table you probably don't want to use the direct-path insert anyway.
See the manuals for more information: http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9014.htm#BGBEIACB
Sample taken from 10g manuals:
CREATE TABLE raises (emp_id NUMBER, sal NUMBER
   CONSTRAINT check_sal CHECK(sal > 8000));
EXECUTE DBMS_ERRLOG.CREATE_ERROR_LOG('raises', 'errlog');
INSERT INTO raises
   SELECT employee_id, salary*1.1 FROM employees
   WHERE commission_pct > .2
   LOG ERRORS INTO errlog ('my_bad') REJECT LIMIT 10;
SELECT ORA_ERR_MESG$, ORA_ERR_TAG$, emp_id, sal FROM errlog;
ORA_ERR_MESG$               ORA_ERR_TAG$         EMP_ID SAL
ORA-02290: check constraint my_bad               161    7700
(HR.SYS_C004266) violatedIf the number of rows in the temp table is not too large and you have a suitable index on the large table for the lookup you could also try to use a NOT EXISTS clause in the insert command:
INSERT INTO <large_table>
SELECT ...
FROM TEMP A
WHERE NOT EXISTS (
SELECT NULL
FROM <large_table> B
WHERE B.<lookup> = A.<key>
);But you need to check the execution plan, because a hash join using a full table scan on the <large_table> is probably something you want to avoid.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

What is the best way to run internet explorer on Mac and IPad and is it safe to do so??

I need to run internet explorer to access new billing software, what is the best way to do so and is it safe to run this on macbook and ipad if possible??

You can't run IE on an iPad and the only way to use it on a Mac, since it's been discontinued for years for the Mac OS, is to install Windows either via Boot Camp or via running Windows as a virtual machine using something such as Parallels Desktop (my personal preference).
Clinton

What is the best way to back-up my entire library, and How??

I need to back up my library before somethings happens!! What is the best way to do that? Also how do you restore it back on your itunes???

My 2 cents...
Fast backup for iTunes library (Windows)
Grab SyncToy 2.1, a free tool from MS. This can be used to copy your entire iTunes library (& other important data folders) onto another hard drive or network share. You can then use SyncToy periodically to synchronise or echo your library to the backup. A preview will show which files need to be updated giving you a chance to spot unexpected changes and during the run only the new or updated files will be copied saving lots of time.
If your media is all organised below the main iTunes folder then you should also be able to open the backup library on any system running the same version of iTunes, regardless of the drive letter or path it appears on.
Step-by-step install guide
You restore files simply by copying them back to where they are missing from, or copy back the entire folder in the event of a major disaster.
tt2

What is the best way to take a cluster, unbundle it, and output to controls?

I have a sub-VI with a cluster of controls coming into it. After I get the cluster into the sub-VI what is the best way to unbundle it and apply the values to the controls in the sub-VI? I am trying to stay away from unbundling it and then wiring a local variable of each control to the unbundled name. What other ways are there of performing this type of operation? Thanks in advance for any help.
Troy

Hi Troy,
well you could work with clusters directly. This way there is no need to unbundle and bundle again...
Otherwise you can work like this to change values in a cluster:
(Yes I know, the code is quite senseless...)
Message Edited by GerdW on 07-26-2007 04:21 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
cluster.png ‏2 KB

What's the best way to extract data (a substring) from a string?

Hi,
I have a field being returned from a function call and the data looks like this:
sfaqwe4|89uuuroeoi0|kjg3j90493 (It's data...pipe...data...pipe...data)
What is the best technique to use to extract the middle set of data between the two pipes?
Is the any prewritten method to separate the data, or do I have to loop thru the field looking for the pipes, etc.?
Thanks for your help,
Andy

<<Copy paste from http://careerabap.blogspot.com/2009_08_01_archive.html - user notified, points removed>>
Hi,
The WRITE statement is what we use to substring a field. The syntax is as follows:
WRITE fieldname+starting_position(field_length) to variable
The fieldname is the source (or input). The plus sign precedes the starting position of the substring. The first position in the string is 0. Immediately after (no space) comes the length of the substring you are going to use. You can also substring the variable that you are writing the string to (the target).
You can also use function module 'STRING_SPLIT_AT_POSITION'.
Best Regards,
Edited by: nihad omerbegovic on Dec 14, 2009 3:03 PM
Edited by: Matt on Dec 20, 2009 4:13 PM

What is the best way to extract/consume HR data to and from Peoplesoft?

Similar Messages

Maybe you are looking for