What is the best way to get the new iPhone/ iPhone 5
What is the best way to get the new iPhone/ iPhone 5 when it is released. I want to get the phone as quick as possible. If i order it on The first day of pre orders will i get it on the same day as the release in stores? I'm on an unlimited data plan with AT&T. Because the new iPhone will most likely have 4 g data will I loose the unlimited plan?
Apple has not made any announcement. We are not allowed to speculate on this forum.
Similar Messages
-
Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.
Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
You chance of getting it back is very small.
There are a few things you can try.
Try remote lock/wipe your iPhone through Find My iPhone.
https://www.icloud.com
You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
http://support.apple.com/kb/HT2526 -
What is the quickest way to get a new iPhone swapped for my current iPhone?
Hello all,
I'm in search of a solution for my parents. The conundrum is this:
Parents have a pair of iPhone 4 8GB picked up for free on contract back in 2010 from Verizon Wireless.
They're interested in the new iPhone (6) and would like to get replacements for both. Issue is they don't want to pay. They want it "free" just as they did the first time.
Everyone has a decent idea about the carriers offering up to $200 for working iPhones from 2010 and later.
My parents do not want to be without their iPhones for any amount of time so they have ruled out Verizon's ship your old phone, let us confirm it's a working iPhone, and then wait for us to give you a virtual gift card for use later. Reading their small print states this could be weeks.
From what I was hearing AT&T was offering the $200 upgrade in brick & mortar stores, essentially allowing customers to walk out with a "free" iPhone 6.
My parents do not want to switch carriers.
Does the Apple community have an viable tips, suggestions, or comments regarding my parents situation? Any feedback is greatly appreciated as every option I've brainstormed with them results in a time loss.
They do not have back up phones to take the place of their current mobile devices and I don't believe they would want to issue themselves temporary throwaway phones, like a Tracphone. With that said... what do you think?Trade-in: The trade-in value for an iPhone 4 with only 8GB will be minimal, but you may be able to get some credit through Verizon Apple. Those phones through Apple result in about $35 credit if in great working condition. AT&T is offering up to $200. I can tell you from experience you won't get $200 for an 8GB iPhone 4. We received $100 for a very good condition 4 with 16GB of RAM at AT&T.
Verizon trade-in: https://www.trade-in.vzw.com/home.php5?c=en-us
Apple trade-in: http://store.apple.com/us/iphone/reuse-and-recycling
New phone: Generally the only "free" iPhone on contract is the bottom-end one, which is the iPhone 5c at the current time. It is important to note that that phone is limited in terms of lifespan (won't likely get OS updates after next year).
That said, most US carriers are moving away from, or financially discouraging, completely subsidized phones towards monthly subsidized phones. The iPhone 6 is generally $199, iPhone 6+ is $299 on contract in the US, regardless of carrier.
You can walk out of a Verizon store (or AT&T) with a "free" iPhone 6, but you'll be paying for it monthly (~$27 for a 6, $31 for a 6+) over the two year timeframe instead. If they absolutely don't want to spend anything out of pocket but want a 6 or 6+, that's about the best they'll be able to do. -
If my 5s is broken, what is the best way to get a new one? File a claim or visit an apple store?
My phone is broken and will not turn on, I'm not sure how to find if I have insurance or not but I'm not sure if I should go to Verizon or visit an apple store to get a new phone..
If you purchased insurance you would know it by looking at your invoice each month.
The on/off button has a recall
Exchange + Repair Extension Programs - Apple Support
The repair may be covered. However go to an Apple Store for any apple iPhone issues. You will save yourself a load headache.
Good Luck -
What's the best way to add a new iphone to family itunes?
We just bought a second iphone for my wife. It was set up with her own apple id. It looks like the family sharing for itunes requires a common apple id. What's the best way to share the family music library with her new device?
ThanksHi,
I would suggest looking into some javascript samples to insert within your site.
Ex: http://www.mortgagecalculator.org/free-tools/
Kind regards,
-Sidney -
Best way to get "fresh" new battery for PBG4?
I need to buy my third battery for my 12" PBG4 (first two not recalled). Anyway, aren't some batteries fresher than others and, if so, how can I be ensured that I'm buying the freshest battery possible. I will have spent almost $300 for batteries and I want the most juice I can get. Where is the best place to order from. Is availablity an issue here?
Thank you very muchOther than Apple, NewerTech is another choice.
-
I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again . What is the best way to get complete access to my old hd installed in my new Macbook?
Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.
-
What is the BEST way to get my macbook with lion on it, to communicate with my Canon 40D camera?
What is the BEST way to get my macbook with lion on it, to communicate with my Canon 40D camera? It says the utility disk is a PowerPC app and that is no longer supported. What do I do now? I can't upload photos from my camera.
Also, I had the same problem happen when I tried to install an older version of Corel Painter. Are Macbook Pro users just NOT supposed to be able to use their laptops for the purposes they are best designed for?
-Frustrated new Mac user -
What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.
First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
Please tell me if you have any problems with backing up.
Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
Please tell me if you need any help.
I hoped I answered your questions and solved your problem! -
What's the best way to get a copy of Final Cut 7?
Amazon.
Apple stoped selling it officially 20 months ago. -
I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?
Appreciate your assistance.The answer depends on whether the AirPort Extreme is your main router....or...the Linksys device is your main router.
In either case, the two devices must connect together using a wired Ethernet connection using CAT5e or CAT6 cabling.
Any version of the AirPort Extreme produced within the last 5 years will have Gigabit Ethernet ports. In order to get the same speeds from the Linksys router, it will also need to be Gigabit Ethernet capable.
If you need additional Ethernet ports, you will need to add a Gigabit Ethernet switch to either the AirPort Extreme or Linksys router.
It is assumed that your other devices connecting to the AirPort Extreme and Linksys router will also have Gigabit Ethernet capability.
Not sure why you mention "ac" speeds in your post. This relates to wireless connections, not wired. -
I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about: so I don't loose any of my photos/keywords? Who can help?
The Bridge General Discussion can give you the specifics of transferring your information over to Bridge CS6.
-
When I'm done with my fcp sequence, whats the best way to get it to dvd?
When I'm done with my fcp sequence, whats the best way to get it to dvd?
The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
The advice to go to iDVD is even easier.
bogiesan -
Whats the best way to get dvd onto 5800
Peoples,
I'm strugglin to get DVD onto my noka 5800. It's not obvious in the user manual and looking around the web i need to 'convert' it to the fim on.
Please does anybody have an easy, fool proof way of doing this??????
Message Edited by blueleaches on 21-Aug-2009 06:02 PMIf its possible there should be some walkthrough's on google.
http://www.lmgtfy.com/?q=whats+the+best+way+to+get+dvd+onto+5800 -
Whats the best way to get a big text file in a CLOB variable?
Hi,
I have a very premitive type of question.
I have a big text file, say 30 MB, in a Unix directory (Solaris). I want to get the whole text of that file in a CLOB variable.
I saw the procedure dbms_lob.loadfromfile/loadclobfromfile. In both these cases, according to the documentation, the target where is collect the data will be a BLOB and not a CLOB. So, I have to convert that blob into a clob.
If I want to avoid all this conversion process, whats the best way to get a text from a file into a CLOB variable?
Please suggest.
RegardsIn addition, LoadFromFile is overloaded to handle both BLOB and CLOB:
PROCEDURE LOADFROMFILE
Argument Name Type In/Out Default?
DEST_LOB BLOB IN/OUT
SRC_LOB BINARY FILE LOB IN
AMOUNT NUMBER(38) IN
DEST_OFFSET NUMBER(38) IN DEFAULT
SRC_OFFSET NUMBER(38) IN DEFAULT
<BR>
PROCEDURE LOADFROMFILE
Argument Name Type In/Out Default?
DEST_LOB CLOB IN/OUT
SRC_LOB BINARY FILE LOB IN
AMOUNT NUMBER(38) IN
DEST_OFFSET NUMBER(38) IN DEFAULT
SRC_OFFSET NUMBER(38) IN DEFAULT -
Whats the best way to get the server name in a servlet deployed to a cluster?
Hi,
I have a servlet in a web application that is deployed to a cluster, just
wondering what is the best way to get the name of the node that the server is
running on at run time??
Thanks
Please try to modify the following code and test for your purpose: (check Weblogic
class document for detail)
import javax.naming.*;
import weblogic.jndi.*;
import weblogic.management.*;
import weblogic.management.configuration.*;
import weblogic.management.runtime.*;
MBeanHome home = null;
try{
//The Environment class represents the properties used to create
//an initial Context. DEfault constructor constructs an Environment
//with default properties, that is, with a WebLogic initial context.
//If unset, the properties for principal and credentials default to
//guest/guest, and the provider URL defaults to "t3://localhost:7001".
Environment env = new Environment();
//Sets the Context.PROVIDER_URL property value to the value of
//the argument url.
if(admin_url!=null){
env.setProviderUrl(admin_url);
//Sets the Context.SECURITY_PRINCIPAL property to the value of
//the argument principal.
env.setSecurityPrincipal(username);
//Sets the value of the Context.SECURITY_CREDENTIAL property to
//the value of the argument cedentials
env.setSecurityCredentials(password);
//Returns an initial context based on the properties in an Environment.
ctx = env.getInitialContext();
}else ctx = new InitialContext();
home = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
ctx.close(); //free resource
// or if looking up a specific MBeanHome
//home = (MBeanHome) ctx.lookup(MBeanHome.JNDI_NAME + "." + serverName);
DomainMBean dmb = home.getActiveDomain(); //Get Active Domain
ServerMBean[] sbeans = dmb.getServers(); //Get all servers
if(sbeans!=null){
for(int s1=0; s1<sbeans.length; s1++){
String privip = sbeans[s1].getListenAddress();
sbeans[s1].getName();
sbeans[s1].getListenPort();
WebServerMBean wmb = sbeans[s1].getWebServer();
}catch(Exception ex){
"Gao Jun" <[email protected]> wrote:
>Is there any sample code? Thanks
>
>Best Regards,
>Jun Gao
>
>"Xiang Rao" <[email protected]> wrote in message
>news:[email protected]...
>>
>> Sure. You can use the Weblogic management APIs to query ServerBean.
>>
>>
>> "Me" <[email protected]> wrote:
>> >
>> >Thanks for your reply, i was hoping to find a better way for example
>> >a class in
>> >weblogic API.
>> >
>> >Thanks
>> >
>> >"Xiang Rao" <[email protected]> wrote:
>> >>
>> >>Physical: InetAddress.getLocalHost().getHostName()
>> >>Weblogic: System.getProperty("weblogic.Name");
>> >>
>> >>
>> >>"Me" <[email protected]> wrote:
>> >>>
>> >>>Hi,
>> >>> I have a servlet in a web application that is deployed to a
>cluster,
>> >>>just
>> >>>wondering what is the best way to get the name of the node that
>the
>> >>server
>> >>>is
>> >>>running on at run time??
>> >>>
>> >>>Thanks
>> >>
>> >
>>
>
>
Maybe you are looking for
-
Variable value is not getting set in BEx / WAD
Hi, We have a WAD report where we have selection on Comp Code which is restricted to a variable Var1. In the same WAD, a button group is used to execute a Planning Sequence, it has a filter for Comp Code which is restricted to a mandatory variable Va
-
Hi My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than You
-
Plotting Senderbase Information on a World Map
Greetings, I have whipped up a quick script some of you may find useful. ip2mapplot.py is a Python script for resolving a number of IP addresses to latitude / longitude coordinates and plotting them on a world map Below is an image generated from one
-
how to search an object type if i know only name of object. e.g suppose i know z_obj but the type i.e. if it is table or structure etc. then where shall i search
-
How to remove tooltip 'Desktop Innerpage' from portal?
Hello, I am seeing a tooltip called 'Desktop Innerpage' in the portal content area on the blankscreen before my CRM weshop application gets loaded. Can someone please help getting rid of this tooltip? I couldn't see any option in Default Framework Pa