What is the command similar to ied (HPUX) on Solaris
I was using ied (interactive editor) to store previous commands on HPUX. Is there a similar utility on Solaris?
Rgds
Haraprasad
Hi Haraprasad,
If you use ksh on Solaris and use option -o vi ($ksh -o vi), this will provide you the similar functionality. You can recall or search the previous command using key sequence "ESC k" or "ESC /<command>".
Hope this helps.
Thanks,
--Raj
Similar Messages
-
What are the commands available to read a file from application server and
What are the commands available to read a file from application server and store the file into an internal table?
Hi,
To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b> -
Hi All,
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?Hi Jayachander,
Have a look at these sap notes:
For taking backup: Schedule from DB13 and get the exact command from Logs
1841993 - SYB: How to schedule backups in DBA Cockpit
1887068 - SYB: Using external backup and restore with SAP Sybase ASE
How to restore DB
1611715 - SYB: How to restore a Sybase ASE database server (Windows)
Divyanshu -
Q: What is the command to verify the configuration that are not saved or sent to local controllers?
A: We can execute the command that is shown in below image to check the status of the configuration that has been made.
Note: For example I made changes to the default VAP profile and executed the command "show master-configpending" which shows the pending configuration to be saved/sent to local controllers.But that jar file loads without images and icons when it is in other directory.Images should be accessed via a URL rather than using a filename because they will exist as entries in the jar archive not as files. Typically this URL would be obtained by using the Class method [getResource()|http://java.sun.com/javase/6/docs/api/java/lang/Class.html#getResource(java.lang.String)]. There are details in this [Java World article|http://www.javaworld.com/javaworld/javaqa/2002-11/02-qa-1122-resources.html].
-
I am trying to connect my iMac with my MacBook What is the command keys and process in doing so. Have firmwre in place.
Here's the Apple Support article on Target Mode http://support.apple.com/kb/HT1661
-
I want to upload multiple pictures what is the command on my keyboard?
I want to upload multiple pictures to an email. What is the command on my keyboard???
Selecting multiple items (pictures, files etc.) is pretty standard across most apps. To select a block of items click on the first then shift-click on the last. To select multiple non adjacent items click on the first then command-click on each of the remaining items. You can then do copy/paste, drag/drop or whatever other command may be appropriate for the app you are using.
-
What is the command to look at process at os level ?
what is the command to look at process at os level ?
Do you want Dispatcher processes or else all sap related processes?
Any ways:
Try with this:
ps -ef/grep XXXX/grep DEV..here XXXX..give process name
If you want for all then just go with ps -ef/grep DEV
If you want to have cpu utilization then just go with
TOPAS cmd ....
Use dpmon for a single dispatcher.
Satish -
HT1391 what is the command to copy and also the command to paste?
What is the command to copy and paste something?
In Mac OS X, press the Command and C or V keys.
(87331) -
What is the command to change my screen from a positive (white background) to a negative (black background) Is the command the same for
mac book as it is for the imac?Option-Control-Command-8, or the setting on the Display pane of the Universal Access system preference. It's the same for all computers running Snow Leopard.
Regards. -
What are the commands in smartforms
hi gurus
can anyone suggest me
what are the commands in smartforms
thank you
regards
kals.Hi,
Check the below link for complete information on smartforms
[SMARTFORMS|http://sapabap.iespana.es/sapabap/manuales/pdf/smart.pdf]
Regards,
Chandru -
What is the command to check if there are any active calls before restarting the voice router?
what is the command to check if there are any active calls before restarting the voice router? thanks
Hi.
I can suggest show call active voice or show voice call status or show sip-ua call brief in case of SIP TSP.
HTH
Regards.
Carlo -
What is the command to see the database
what is the command to see the database?iam using oracle express edition in that i tried to create a database but it showing database already created.
i need to check which database is created.Probably you are thinking that Oracle database is a kind of file something like which we sees other files like .txt, .doc, .pdf etc which we sees by ls or dir commands. Of course there are files for Oracle database, but they have their own nomenclature and setup which finds in C:\oraclexe\oradata\XE\ (For example in Windows) or /usr/lib/oracle/xe/oradata/XE/ (For example in Linux).
By default, the database is started for you after installation and every time your computer is restarted. However, to reduce the overall performance load on the system, you can manually stop the database, and then manually restart it later.
Oracle&reg; Database Express Edition
Ok, now if you wish to login to the database (we don't says "see" the database, because database is different thing than a picture or image ), you just open your command window and say :
sqlplus sys/your_password_of_sys_user as sysdba
If you get SQL> prompt, you have logged in the database as sys user and this is your database.
If you wish to login with different user then you can :
1.login from command window by sqlplus username/password
2.login from SQL> prompt by connect username/password
Regards
Girish Sharma -
What is the command for return to a previous page in java
Hi,
I need to customize a OK button that return to a previous page instead of forwarding other page? The best way is to extend the CO class? If yes, what is the command to do so please.
Thanks,
CYHi CY,
In which ever pages you are calling this page, extend controller of those pages and in PFR of that controller give the following code
String s4 = pageContext.getCurrentUrlForRedirect();
pageContext.putSessionValue("previousPageUrl", s4);
then in your second page you can call this session variable by
pageContext.getSessionValue("previousPageUrl");
use this session value for page redirect.
Reagrds
jyothi -
What is the command to see if there is any faults in an Aruba Controller.
Q: What is the command to see if there is any faults in an Aruba Controller?
A: The command in the below screen shot will tell us what are the active faults that occurred in an Aruba Controller.
The output that is shown in above screen shot shows that active faults.Hi.
I can suggest show call active voice or show voice call status or show sip-ua call brief in case of SIP TSP.
HTH
Regards.
Carlo -
What is the command to check the changes in the spanning-tree topology?
What is the command to check the changes in the spanning-tree topology?
Hi,
Few commands which would help are:
1- Show spanning-tree detail
2-show spanning-tree detail | in ieee|from|occur|is exec >> This will give from were the changes occuring- Ex:
C6K1#show spanning-tree detail | in ieee|from|occur|is exec
VLAN0001 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 9536 last change occurred 00:00:29 ago
from GigabitEthernet4/6
3- show spanning-tree active *& show spanning-tree root >> Will give you the root information.
4- show spanning-tree inconsistentports >> If there are any port which are inconsistent state due to STP features.
STP running MST:
===============
show spanning-tree mst configuration >> Need to check and match the same outputs with the other switches running in the same MST domain/region.
show spanning-tree mst detail
show spanning-tree mst <name of the region>
Debug on STP:
============
debug spanning-tree events/bpdu >> would be good but to be run with more cautious.
HTH
Inayath
*Plz rate if this info is usefull.
Maybe you are looking for
-
the add on is still available on photobucket, but not for 4.0, it means having to download, then upload, will the feature be redone so that it works with the new version?
-
No internet access in public unsecured WLAN environment with Airport card
Dear community I do face the following problem: I am not able to open any internet pages in a particular unsecured public WLAN Hot Spot, although my iBook (over an Airport Card) has been successfully assigned a TCP / IP address. Other public Hot Spot
-
Cost of replacing hard drive on my powerbook G4
I bought my powerbook about 2 years ago and to be honest, have loved it a lot. Today after a coffee break, I sat to work on my PB and it was very slow...then began a host of problems which have ended with it not starting up. I have done disk utility
-
Seperating sound from video clips?
I was wondering if anyone could give me instructions on how to go about serperating audio from all of my video clips in order for me to delete the audio. Power Book G4 Mac OS X (10.4.6)
-
There is an issue with my Pages application. I have been writing essays and buiding agendas with Pages and if I wanted to email them, I would simply use the share tool at the top of the screen. Though I have recently come across some problems sharing