What is the correct file version?

Why does it appear that there are differing file versions for Firefox, Thunderbird and SeaMonkey depending where you look?
Windows Explorer show one file version for example 1.9.2.3951 is the 3.6.12 product version but yet our SCCM reports 1.9.2.12 for the same machine/same file
Any ideas?
We are trying to patch our FF and Tbird user base to standardize but with this discrepancy its like trying to nail the jelly to the wall -- heylp!

3.6.12 is the Firefox version
1.9.2.12 is the Gecko version. Gecko is the rendering engine used by Firefox, Thunderbird and SeaMonkey. That Gecko version for example is used by Firefox 3.6.12 and Thunderbird 3.1.6
1.9.12.3951 is a version number attached to the executable file.
It is best to use the Firefox version number (3.6.12)

Similar Messages

What is the correct file path for "library?"(what precedes it?)

My MBP crashed, and I had to restore by dragging and dropping from an external hard drive. I fear I may have put the "library" for my user account in the incorrect place. I am trying to create and modify MS Excel Templates and am learning to do so watching Lynda.com videos and the file path they illustrate has the library listed after selecting a user...on my MBP I have library and users in the same category so when I go to my "user name" there is no library in the next category. I hypothesize that is why Excel is not automatically creating a "my templates" file for the custom templates I am creating.
Also, if I am correct, how do I fix this problem?
Many thanks in advance!

That's normal on Lion and newer. Choose Go to Folder from the Finder's Go menu, provide ~/Library/ as the path, and drag items from the corresponding folder on the external drive to it. Don't drag anything from the Library folder at the top level of the drive to the one in your home folder.
(112126)

What's the correct eclipse version shall I use for gyrex 1.3.2?

Hi,
I am a new one for Gyrex. And I have followed the wiki page to setup the Gyrex develop environment, but I failed. Some bundles cannot be resolved due to the imcomplete dependencies. Such as:
org.eclipse.equinox.registry
Missing Constraint: Import-Package: javax.xml.parsers;version="0.0.0"
Missing Constraint: Import-Package: org.xml.sax;version="0.0.0"
Missing Constraint: Import-Package: org.xml.sax.helpers;version="0.0.0"
org.apache.solr.client.solrj and org.apache.solr.core
Missing Constraint:Import-Package:org.apache.commons.httpclient;version="3.1.0"
Missing Constraint:Import-Package:org.apache.commons.httpclient.methods;version="3.1.0"
Missing Constraint:Import-Package:org.apache.commons.httpclient.methods.multipart;version="3.1.0"
The eclipse platform I used is Mars Release (4.5.0).
Can anyone guide me to setup the target platform?

Hi Gunnar,
Many thanks for your help.
Now I can started the dev environment now. While, I got an error when I try to access the cluster management page in the web console (http://localhost:3110).
The screenshot for the error is attached. And the detail log while starting the environment is as below:
osgi> 19:58:24,679 |-INFO in ch.qos.logback.classic.LoggerContext[default] - Could NOT find resource [logback.groovy]
19:58:24,679 |-INFO in ch.qos.logback.classic.LoggerContext[default] - Could NOT find resource [logback-test.xml]
19:58:24,679 |-INFO in ch.qos.logback.classic.LoggerContext[default] - Could NOT find resource [logback.xml]
19:58:24,680 |-INFO in ch.qos.logback.classic.LoggerContext[default] - Setting up default configuration.
19:58:24,719 |-INFO in class org.eclipse.gyrex.boot.internal.logback.LogbackConfigurator - Setting up Gyrex log configuration.
19:58:24,720 |-INFO in class org.eclipse.gyrex.boot.internal.logback.LogbackConfigurator - Using built-in default configuration. Enhancements and suggestions welcome.
19:58:24,721 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating DEBUG level on Logger[ROOT] onto the JUL framework
19:58:24,725 |-INFO in ch.qos.logback.core.rolling.RollingFileAppender[error-log] - Active log file name: D:\Tools\eclipse\workspace\logs\error.log
19:58:24,725 |-INFO in ch.qos.logback.core.rolling.RollingFileAppender[error-log] - File property is set to [D:\Tools\eclipse\workspace\logs\error.log]
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating WARN level on Logger[org.apache.commons] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating WARN level on Logger[httpclient.wire] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating WARN level on Logger[org.apache.http] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating WARN level on Logger[org.apache.zookeeper] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating WARN level on Logger[org.apache.solr] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating WARN level on Logger[org.apache.sshd] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating WARN level on Logger[org.apache.mina] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating WARN level on Logger[org.mortbay.log] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating INFO level on Logger[org.eclipse.jetty] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating INFO level on Logger[org.quartz] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating INFO level on Logger[sun] onto the JUL framework
19:58:24,726 |-INFO in ch.qos.logback.classic.jul.LevelChangePropagator@516f5228 - Propagating INFO level on Logger[com.google.inject] onto the JUL framework
19:58:24,727 |-INFO in org.eclipse.gyrex.boot.internal.logback.LogbackLevelDebugOptionsBridge@4c6bcaef - Initializing log level overrides.
19:58:24.729 [Start Level: Equinox Container: e0ee93ca-e82a-0015-12a1-8f2f63b87f29] DEBUG o.e.g.server.settings.SystemSetting - No value set for gyrex_portOffset/gyrex.portOffset, using default value null
19:58:24.852 [Worker-0] INFO org.eclipse.jetty.util.log - Logging initialized @3177ms
19:58:24.860 [Worker-0] DEBUG o.e.g.server.settings.SystemSetting - No value set for gyrex_admin_secure/gyrex.admin.secure, using default value false
19:58:24.879 [Worker-0] DEBUG o.e.g.server.settings.SystemSetting - No value set for gyrex_admin_http_port/gyrex.admin.http.port, using default value 3110
19:58:25.807 [Worker-0] DEBUG o.e.g.server.settings.SystemSetting - No value set for gyrex_admin_auth/gyrex.admin.auth, using default value null
19:58:25.807 [Worker-0] DEBUG o.e.g.server.settings.SystemSetting - No value set for gyrex_admin_secure/gyrex.admin.secure, using default value false
19:58:25.809 [Worker-0] INFO org.eclipse.jetty.server.Server - jetty-9.2.9.v20150224
19:58:25.836 [Worker-0] INFO o.e.j.server.handler.ContextHandler - Started o.e.j.s.ServletContextHandler@7c3aa90a{/,file:/D:/Tools/eclipse/workspace/.metadata/.plugins/org.eclipse.gyrex.admin.ui/context/,AVAILABLE}
19:58:25.854 [Worker-0] INFO o.e.jetty.server.ServerConnector - Started ServerConnector@2e89630{HTTP/1.1}{0.0.0.0:3110}
19:58:25.854 [Worker-0] INFO org.eclipse.jetty.server.Server - Started @4179ms
19:58:25.926 [Component Resolve Thread] INFO o.e.g.cloud.internal.CloudActivator - Node id: sean-desktop-pc_53ca934f
19:58:25.992 [Component Resolve Thread] INFO o.e.g.e.w.i.WebsocketEventTransport - Activating WebsocketEventTransport.
19:58:25.992 [Component Resolve Thread] DEBUG o.e.g.server.settings.SystemSetting - No value set for gyrex_event_websocket_port/gyrex.event.websocket.port, using default value 3111
19:58:26.663 [Component Resolve Thread] INFO org.eclipse.jetty.server.Server - jetty-9.2.9.v20150224
19:58:26.666 [Component Resolve Thread] INFO o.e.j.server.handler.ContextHandler - Started o.e.j.s.h.ContextHandler@55989874{/eventbus,null,AVAILABLE}
19:58:26.669 [Component Resolve Thread] INFO o.e.jetty.server.ServerConnector - Started ServerConnector@5060706b{HTTP/1.1}{0.0.0.0:3111}
19:58:26.670 [Component Resolve Thread] INFO org.eclipse.jetty.server.Server - Started @4995ms
19:58:26.673 [Worker-1] DEBUG o.e.g.e.w.i.WebsocketEventTransport - Connecting online nodes for the event transport.
19:58:26.681 [Worker-1] WARN o.e.g.e.w.i.WebsocketEventTransport - An error occured while connecting online nodes for the event transport. Operation will be retried.
19:58:26.702 [Start Level: Equinox Container: e0ee93ca-e82a-0015-12a1-8f2f63b87f29] INFO o.e.g.h.l.internal.HttpLogActivator - Adding Wildfire Appender...
19:58:52.747 [qtp1611116091-61] ERROR org.eclipse.gyrex.rap.JFaceLog - Unable to open page 'Cluster (id cluster)'. Please check the server logs.
java.lang.RuntimeException: Error reading list of nodes. GateDownException: ZooKeeper Gate is DOWN. (null)
at org.eclipse.gyrex.cloud.internal.admin.CloudManagerImpl.getOnlineNodes(CloudManagerImpl.java:164) ~[na:na]
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) ~[na:1.7.0_79]
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) ~[na:1.7.0_79]
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) ~[na:1.7.0_79]
at java.lang.reflect.Method.invoke(Unknown Source) ~[na:1.7.0_79]
at org.eclipse.gyrex.common.internal.services.ServiceProxy.invoke(ServiceProxy.java:303) ~[org.eclipse.gyrex.common_1.3.0.v20140923-0741.jar:na]
at com.sun.proxy.$Proxy2.getOnlineNodes(Unknown Source) ~[na:na]
at org.eclipse.gyrex.admin.ui.cloud.internal.NodeBrowserContentProvider.getElements(NodeBrowserContentProvider.java:108) ~[na:na]
at org.eclipse.jface.viewers.StructuredViewer.getRawChildren(StructuredViewer.java:992) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.ColumnViewer.getRawChildren(ColumnViewer.java:699) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.AbstractTreeViewer.getRawChildren(AbstractTreeViewer.java:1333) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.TreeViewer.getRawChildren(TreeViewer.java:391) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.StructuredViewer.getFilteredChildren(StructuredViewer.java:900) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.AbstractTreeViewer.getSortedChildren(AbstractTreeViewer.java:602) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.AbstractTreeViewer$1.run(AbstractTreeViewer.java:802) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:66) ~[org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.jface.viewers.AbstractTreeViewer.createChildren(AbstractTreeViewer.java:779) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.TreeViewer.createChildren(TreeViewer.java:644) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.AbstractTreeViewer.createChildren(AbstractTreeViewer.java:750) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.AbstractTreeViewer.internalInitializeTree(AbstractTreeViewer.java:1495) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.TreeViewer.internalInitializeTree(TreeViewer.java:833) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.AbstractTreeViewer$5.run(AbstractTreeViewer.java:1479) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1427) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.TreeViewer.preservingSelection(TreeViewer.java:403) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1388) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.AbstractTreeViewer.inputChanged(AbstractTreeViewer.java:1472) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.gyrex.admin.ui.internal.widgets.FilteredTree$NotifyingTreeViewer.inputChanged(FilteredTree.java:105) ~[na:na]
at org.eclipse.jface.viewers.ContentViewer.setInput(ContentViewer.java:280) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.jface.viewers.StructuredViewer.setInput(StructuredViewer.java:1674) ~[org.eclipse.rap.jface_3.0.0.20150520-1729.jar:na]
at org.eclipse.gyrex.admin.ui.internal.widgets.AdminPageWithTree.activate(AdminPageWithTree.java:141) ~[na:na]
at org.eclipse.gyrex.admin.ui.cloud.internal.ZooKeeperBasedAdminPage.activate(ZooKeeperBasedAdminPage.java:69) ~[na:na]
at org.eclipse.gyrex.rap.application.RapApplicationEntryPoint.activate(RapApplicationEntryPoint.java:170) [org.eclipse.gyrex.rap_1.0.0.v20150604-1242.jar:na]
at org.eclipse.gyrex.rap.application.RapApplicationEntryPoint.open(RapApplicationEntryPoint.java:528) [org.eclipse.gyrex.rap_1.0.0.v20150604-1242.jar:na]
at org.eclipse.gyrex.rap.application.RapApplicationEntryPoint.access$0(RapApplicationEntryPoint.java:513) [org.eclipse.gyrex.rap_1.0.0.v20150604-1242.jar:na]
at org.eclipse.gyrex.rap.application.RapApplicationEntryPoint$4.openPage(RapApplicationEntryPoint.java:401) [org.eclipse.gyrex.rap_1.0.0.v20150604-1242.jar:na]
at org.eclipse.gyrex.rap.application.NavigationBar$1.openPage(NavigationBar.java:61) [org.eclipse.gyrex.rap_1.0.0.v20150604-1242.jar:na]
at org.eclipse.gyrex.rap.application.DropDownNavigation$1.widgetSelected(DropDownNavigation.java:67) [org.eclipse.gyrex.rap_1.0.0.v20150604-1242.jar:na]
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:262) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:86) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:708) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:610) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.swt.widgets.Display.executeNextEvent(Display.java:1216) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.swt.widgets.Display.runPendingMessages(Display.java:1197) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.swt.widgets.Display.safeReadAndDispatch(Display.java:1180) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1172) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.lifecycle.ProcessAction.execute(ProcessAction.java:27) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.lifecycle.PhaseExecutor.execute(PhaseExecutor.java:38) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.lifecycle.SimpleLifeCycle.execute(SimpleLifeCycle.java:46) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.service.RWTMessageHandler.executeLifeCycle(RWTMessageHandler.java:56) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.service.RWTMessageHandler.handleMessage(RWTMessageHandler.java:40) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.remote.MessageChainElement.handleMessage(MessageChainElement.java:28) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.service.LifeCycleServiceHandler.processMessage(LifeCycleServiceHandler.java:140) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.service.LifeCycleServiceHandler.processUIRequest(LifeCycleServiceHandler.java:111) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.service.LifeCycleServiceHandler.synchronizedService(LifeCycleServiceHandler.java:81) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.internal.service.LifeCycleServiceHandler.service(LifeCycleServiceHandler.java:72) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.engine.RWTServlet.handleValidRequest(RWTServlet.java:135) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.engine.RWTServlet.handleRequest(RWTServlet.java:117) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at org.eclipse.rap.rwt.engine.RWTServlet.doPost(RWTServlet.java:107) [org.eclipse.rap.rwt_3.0.0.20150601-1556.jar:na]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [javax.servlet_3.1.0.v201410161800.jar:3.1.0]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [javax.servlet_3.1.0.v201410161800.jar:3.1.0]
at org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:808) [org.eclipse.jetty.servlet_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:587) [org.eclipse.jetty.servlet_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:221) [org.eclipse.jetty.server_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:1127) [org.eclipse.jetty.server_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:515) [org.eclipse.jetty.servlet_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:185) [org.eclipse.jetty.server_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:1061) [org.eclipse.jetty.server_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:141) [org.eclipse.jetty.server_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:97) [org.eclipse.jetty.server_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.server.Server.handle(Server.java:497) [org.eclipse.jetty.server_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.server.HttpChannel.handle(HttpChannel.java:310) [org.eclipse.jetty.server_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.server.HttpConnection.onFillable(HttpConnection.java:257) [org.eclipse.jetty.server_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.io.AbstractConnection$2.run(AbstractConnection.java:540) [org.eclipse.jetty.io_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:635) [org.eclipse.jetty.util_9.2.9.v20150224.jar:9.2.9.v20150224]
at org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:555) [org.eclipse.jetty.util_9.2.9.v20150224.jar:9.2.9.v20150224]
at java.lang.Thread.run(Unknown Source) [na:1.7.0_79]
Caused by: org.eclipse.gyrex.cloud.internal.zk.GateDownException: ZooKeeper Gate is DOWN. (null)
at org.eclipse.gyrex.cloud.internal.zk.ZooKeeperGate.get(ZooKeeperGate.java:137) ~[na:na]
at org.eclipse.gyrex.cloud.internal.admin.CloudManagerImpl.getOnlineNodes(CloudManagerImpl.java:156) ~[na:na]
... 75 common frames omitted
20:00:26.683 [Worker-1] DEBUG o.e.g.e.w.i.WebsocketEventTransport - Connecting online nodes for the event transport.
20:00:26.685 [Worker-1] WARN o.e.g.e.w.i.WebsocketEventTransport - An error occured while connecting online nodes for the event transport. Operation will be retried.
20:02:26.735 [Worker-0] DEBUG o.e.g.e.w.i.WebsocketEventTransport - Connecting online nodes for the event transport.
20:02:26.736 [Worker-0] WARN o.e.g.e.w.i.WebsocketEventTransport - An error occured while connecting online nodes for the event transport. Operation will be retried.
20:04:26.786 [Worker-0] DEBUG o.e.g.e.w.i.WebsocketEventTransport - Connecting online nodes for the event transport.
20:04:26.788 [Worker-0] WARN o.e.g.e.w.i.WebsocketEventTransport - An error occured while connecting online nodes for the event transport. Operation will be retried.

What is the correct way to use Version Information from the sequence and from the deployment tool

I seem to be missing something in how the various version numbers are supposed to be used. My end goal is to log and possibly display in the UI the version of the sequence and which installer version was used to inspect a UUT. I have gotten most of the way there using:
How Can I Programmatically Query the Sequence File Version of My TestStand Sequence?
and logging this into the report with a function which contains:
Parameters.UUT.AdditionalData.SetValString("Test Version",1,RunState.SequenceFile.Data.Version),
Parameters.UUT.AdditionalData.SetFlags("",0,PropFlags_IncludeInReport)
The "Deployment Version" in the TestStand Deployment Utility auto incrementing the 3rd position of a version number while the sequence auto increment is working on the 4th.
My first question is are these 2 version numbers in anyway supposed to be related to each other? As it seems to me you would want those 2 reversed, I can make several installers based on sequence version X, making changes to what supporting files are also installed.
If they are not related as I suspect that they are not. How do I programatically grabed the installer version and also log that into the result report?
is there an option to perform a custom deployment build step to log the deployment version before it builds and then reference that log at runtime of the test?

Hi,
The sequence file version and deployment versions are not related.
You can build the installer with whatever version you want using the command line :
https://decibel.ni.com/content/docs/DOC-38947
Hope this helps,
Ravi

What is the correct CIM model and CR content version to import into SLD?

Hi All,
I just met a difficulty that I can not find the correct import version of CIM model and CR content.
Could anyone share some valuable suggestions?
Situations now:
I installed ECC6 SR3 with ABAP+ Java stacks, after installation successfully, I logged onto SLD through http://xxx:50000/sld
since my CIM model and CR content version is too low, so I want to upgrade it.
The currect version is as below:
Model Version (sld/new):     1.5.24
SAP CR Content Version (sld/new):     SAP_CR 2.0 (produced 03/17/2005)
Namespace     Model Version     Classes     Instances     Associations     Total Objects
sld/active      1.5.24               908     36381     60183             97472
I have read note 669669 carefully and downloaded all the relevant versions before updating, the the results are not correct. something like "Unknow status -1" "import anyway" appears.
So, could anyone tell me the correct update file and sequence?
Thank you very much in advance.
Best regards,
Nick

Hi Raghu,
Thanks for your quick reply.
I have downloaded 5 files:
cimsap51506_0-20005942.zip     SP06 for SAP CR CONTENT UP TO 2009
CRDelta1418_0-10003379.ZIP     SP18 for SAP CR CONTENT 2.0
CRDelta1511_0-10004549.ZIP     SP11 for SAP CR CONTENT UP TO 2007
CRDelta41514_0-10006428.ZIP     SP14 for SAP CR CONTENT UP TO 2008
CRDelta51506_0-20005942.ZIP     SP06 for SAP CR CONTENT UP TO 2009
and the update sequence are the same as above, that is to say, first I update CIM model version successfully from 1.5.24 to 1.5.45, and then, I upload CRDelta1418_0-10003379.ZIP which gave me an error message "Unknown status -1", even how many times I click "Import anyway", it's useless.
after then, I tried to upload CRDelta1511_0-10004549.ZIP directly, but it also refused. warning message is "The selected aggregate import is not applicable to the current content version SAP_CR 2.0 of the target namespace.", I clicked button "Import anyway", but it's useless since there contains 0 objects, I don't know why, the message shows "The import will upgrade the content of export line SAP_CR from the current version 2.0 to version 4.0.
Contains 0 objects."
The file CRDelta1511_0-10004549.ZIP is under SAP CR CONTENT UP TO 2007, why its version is 4.0? is it because I need to firstly update to 3.0? and where can I find version 3.0?
I really appreciate your kind help.
Best regards,
Nick

I just paid for and downloaded the wrong version of Adobe Acrobat X Pro. I downloaded the Microsoft version and I have a Mac running OX Yosemite. How do I get a credit for what I ordered and then reorder the correct Mac version of Adobe Acrobat X Pro

I just paid for and downloaded the wrong version of Adobe Acrobat X Pro. I downloaded the Microsoft version and I have a Mac running OX Yosemite. How do I get a credit for what I ordered and then reorder the correct Mac version of Adobe Acrobat X Pro

If you ordered Acrobat via subscription, then you can use either Windows or Mac version. Just download/install the Mac version, then activate it with your Adobe ID.
If you purchased the perpetual license, then you need to Contact Customer Care bu chat or phone.

What is the correct way to call older version of Adober Reader?

What is the correct way to call older version of Adober Reader? Specifically version 8? Acrobar Reader 8 or Adober Reader 8? Is is necessary to include "Reader"? We are creating a form and are adding instructions that it works with version 8 and newer. We want to make sure it is worded correctly!
Thanks!
Danielle

When you "Save as" and you select the "compatibility with" for older versions, the document will be compatible with whatever version you choose, be it 4, 5, 6, 7, 8, or higher. If you want to "test it", you'll need a computer with Reader 8 installed, but I've never seen the "Save as" make something that was incompatible with the version it was saving for.

What is the correct way to format file paths and names in the structapp file?

I am trying to create a structured application to export fm files as xml, and probably read the xml back to fm.
In the structured application file (structapp), I need to specify the locations of the various files (DTD, read/write, template, etc). I would like to place these files on a shared server so others can use the same structapp file (that is, a cop of it). What is the correct way to format the file paths and names? Can folders folder names and file names have spaces in them? I tried the following, for example:
\\serverName\shareName\folder 1\folder 2\file name.dtd
I use the same format for the template file and the read/write rules file.
When I try to save an fm file to xml, FrameMaker says that it cannot read the DTD; however, the resulting xml file appears to be well-formed. The DOCTYPE element in the resulting xml is formatted with forward slashes and spaces replaced with %20.
I tried using forward slashes and replacing spaces with %20, but then I get an error about reading the read/write rules.
NOTE: I have another structured application to read xml into fm. This application does not have a DTD file. The template and read/write rules files are specified as above. Except for complaining about a lack of a DTD, the application works fine; it even applies an XSLT in the process. Again, when I DO add a DTD to this latter application, I get the same complaint about not being able to read the DTD.
I am using fully patched FrameMaker 9 in Windows XP.
Thanks,
Van

Hi Van,
The XML parser and FrameMaker are not the same thing. The Error Log says which component created which message. The XSL processor is another option that can throw messages. The "\\server\path\some.dtd" syntax in structapps.fm seems to be fine for some tools, as Internet Explorer with XML tools successfully finds the DTD which appears as "//server/path/some.dtd" in the XML. But apparently Xerxes, the XML parser bundled with FrameMaker, does not like this notation.
If you have a path with a drive letter, "H:\path\some.dtd", FrameMaker turns that into "file:///H:/path/some.dtd". It seems, Xerces would like to see "file:/" in front of absolute paths.
This is what I have in structapps.fm:
Template: \\server\path\projecttemplate.fm
DTD: some.dtd
Read/write rules: \\server\path\projectrules.txt
DOCTYPE: …
Entity locations
Entity search paths
1: \\server\path\
In the structapps.fm I have the DTD without path information. The resulting XML (without XSL postprocessing) then contains just the file name with a relative path back to the book folder (when saving a book as XML). It therefore requires the DTD to be available at this place. I handle this using an event script that fires for NotePreSaveXml and copies the DTD to the folder of the original document.
As I always use XSL postprocessing and using XSLT1 it is not possible to have the doctype-system as a parameter I have this in my XSL stylesheet:
<xsl:output doctype-system="some.dtd" />
For the resulting XML the DTD is expected to be in the same folder as the XML file. This is handled by the same event script as above, it therefore copies the DTD to the source and the target folder.
Bottom line: If you want/have to use UNC paths, you have to do some programming to work around a FrameMaker bug.
- Michael

Flash player? my iMac crash if I watch tv on it and forget to close my Mac? What is the correct model of Flash Player and where I can get it?wand

file://localhost/Users/Tuula/Desktop/21042012158.jpg
This photo shows, what hapens, if I forget to close the tv-programe after watching it.
What is the correct version of Flash player I need to my iMac?

Check the Flash installed here;
http://www.adobe.com/software/flash/about/
If the installed version is not up-to-date, there is a link on the page to download and install the latest version;
http://get.adobe.com/flashplayer/

What's the correct recovery process once upgraded to Windows 10? (No OneKey Recovery)

I have a Z50-70 laptop that came preinstalled with Windows 8.1. It is a OEM version, with the product key stored in the Bios. It is a UEFI install. It currently has OneKey recovery installed, which, if I understand correctly (I haven't actually used it yet), allows you to recover from a recovery partition in the hard disk. This isn't a "fresh" Windows 8.1, but an image provided by Lenovo that takes you back to the state the laptop was in when originally purchased (will have all Lenovo software and drivers preinstalled). According to the official Lenovo upgrade guide, before performing the Windows 10 upgrade, we should uninstall basically all Lenovo software, including OneKey recovery and it won't work in Windows 10. Questions: 1. What's the correct process to recover the system from within Windows 10 if something goes badly wrong? I think Windows 10 has a built in "reset your computer" functionality in Settings which I assume is what we would be expected to use. Would this take me to:a. A completely fresh install of Windows 10?b. An image created during the 8.1 to 10 upgrade, containing all my files etc at the point of performing the upgrade?c. Or would it use the Lenovo recovery partition (that OneKey Recovery would have used if it was compatible) and take me back to Windows 8.1?d. Something else? 2. Once I've performed the upgrade and Windows 10 has successfully activated, I believe I could create a bootable media with the Windows 10 ISO, boot into it and install a completely clean installation of Windows 10 and it would activate. I could theoretically do as many fresh installs from the bootable media as I want, so long as initially I did the upgrade (not a clean install), and the laptop hardware doesn't change. Is that correct?2a. If so, during the first clean bootable media install process, would I be safe to compeletly remove the Lenovo recovery partition entirely, and from that point onwards rely on Windows 10's "Reset your PC" functionality? Could I could even just use reinstalling Windows 10 from bootable media again as a way of recovering? If I understand correctly, it doesn't make sense to keep the recovery partition it if it can't be used within Windows 10. I think it I had a regular desktop PC with a retail version of Windows, then all the above would be fine. The added complications here are that 1. I have no Windows 8.1 product key (it's handled alll by the BIOS), and 2. I have no recovery disks. I want to make sure I understand everything fully before upgrading, and potentially doing a clean install using bootable media, so that I don't end up messing something up and ending up with either a laptop that I can't recover, of a Windows installation that isn't activated. Thanks.

Update for anyone else reading: I just uninstalled OneKey recovery on my Windows 8.1 installation, in preparation for the upgrade. So as far as Windows is concerned, OneKey Recovery has been completely removed. The good news is that I then shut down the laptop, pressed the novo button, selected "System Recovery" and I was still greeted with the OneKey recovery program where I could choose to restore from factory image, or a custom image. Therefore I assume that once I've upgraded to Windows 10, I will always have the option to restore to factory Windows 8.1 if I ever need/want to. The confusion seems to be that the OneKey recovery software is actually two separate softwares: 1. OneKey Recovery #1 is installed within the hidden recovery partition that is responsible for performing a system restore from the image of your choosing - either the factory image or a custom image created by OneKey recovery software #2. OneKey Recovery software #1 is always accessible via the Novo button. 2. OneKey Recovery #2 is installed on the Windows 8.1 installation, that is responsible for creating custom system images. You can also choose to restore the system from here, but as far as I can tell, this just restarts the computer and loads up OneKey software #1, which allows you to perform the recovery. OneKey Recovery #2 is the software that Lenovo told us to uninstall before upgrading to Windows 10. However, uninstalling OneKey Recovery #2 will leave OneKey Recovery software #1 in tact.As far as I can tell, this means that uninstalling OneKey Recovery #2 means that we lose the ability to create custom system images, but we retain the ability to restore from a system image. Can anyone confirm that I've understood correctly, and that what I've said above is indeed the case? I'm still a little unsure about what Windows 10's built in "Reset this PC" will do though - whether it will use Lenovo's recovery partition or perform a clean Windows 10 install.

What are the correct answers ?

after doing one sample swing application, i assumed the exam will be easy. when i took the exam, i couldn't do anything...
what are the correct answers ??/
Which one of the following converts the Image i into the BufferedImage bi?
Choice 1
bi = new BufferedImage(0, 0, BufferedImage.TYPE_INT_RGB);
Graphics2D g = (Graphics2D)bi.createGraphics();
g.drawImage(i,i.getHeight(this),i.getWidth(this));
Choice 2
bi = new BufferedImage(i.getWidth(this), i.getHeight(this), 1);
bi.drawImage(i,0,0,this);
Choice 3
bi = new BufferedImage(i.getWidth(this), i.getHeight(this), 1);
Graphics2D g = (Graphics2D)bi.createGraphics();
g.drawImage(i,0,0,this);
Choice 4
bi = new BufferedImage(i, i.getWidth(this), i.getHeight(this), BufferedImage.TYPE_INT_RGB);
Choice 5
bi = new BufferedImage(i, i.getWidth(this), i.getHeight(this));
CardLayout
BorderLayout
FlowLayout
GridBagLayout
GridLayout
Which one of the following indicates all of the layout managers (from the list above) that allow you to set the space between the components from an instance of the LayoutManager itself?
Choice 1
CardLayout, FlowLayout, GridBagLayout, GridLayout
Choice 2
GridBagLayout
Choice 3
BorderLayout, GridLayout
Choice 4
BorderLayout, FlowLayout, GridLayout
Choice 5
BorderLayout, CardLayout, FlowLayout, GridBagLayout, GridLayout
JFrame jf = new JFrame();
jf.setSize(400,400);
JTextField jtf = new JTextField("JTextField");
JButton jb = new JButton("JButton");
jf.getContentPane().setLayout(
                      new FlowLayout(FlowLayout.LEFT,1,2));
jf.getContentPane().add(jtf);
jf.getContentPane().add(jb);
Which one of the following indicates the positions of the JTextField jtf and JButton jb relative to the JFrame and each other?
Choice 1
jtf and jb are in the top-center of the Jframe; jtf is to the left of jb, 2 pixels apart.
Choice 2
jb is in the top-right corner of the JFrame with jtf 1 pixel to the left of it.
Choice 3
jtf is in the top-left corner of the JFrame with jb 1 pixel to the right of it.
Choice 4
jb is in the top-right corner of the JFrame with jtf 2 pixels to the left of it.
Choice 5
jtf is in the top-left corner of the JFrame with jb 2 pixels to the right of it
public void drawText(Graphics2D g, String text){
Font f = new Font("Century Gothic", Font.BOLD, 10);
g.setFont(f);
g.drawString(text, 20, 20);
Given the above sample code, what happens if the "Century Gothic" font is NOT available?
Choice 1
The Font() constructor fails, causing "f" to be null, and the setFont() method throws a NullPointerException.
Choice 2
"Century Gothic" is a built in Java font, which always exists within the Java runtime environment.
Choice 3
The code does not compile because only the following "logical" font names are supported in Java: Dialog, DialogInput, Monospaced, Serif, SansSerif, and Symbol.
Choice 4
The Font() constructor throws an IllegalArgumentException.
Choice 5
A default Font object is returned and is used
Sample Code
public void drawText(Graphics2D g, String text){
Font f = new Font("Century Gothic", Font.BOLD, 10);
g.setFont(f);
g.drawString(text, 20, 20);
Given the above sample code, what happens if the "Century Gothic" font is NOT available?
Choice 1
The Font() constructor fails, causing "f" to be null, and the setFont() method throws a NullPointerException.
Choice 2
"Century Gothic" is a built in Java font, which always exists within the Java runtime environment.
Choice 3
The code does not compile because only the following "logical" font names are supported in Java: Dialog, DialogInput, Monospaced, Serif, SansSerif, and Symbol.
Choice 4
The Font() constructor throws an IllegalArgumentException.
Choice 5
A default Font object is returned and is used.
How must do you interact with a JTextField in order to generate an ActionEvent?
Choice 1
Tab into the JTextField from another Component.
Choice 2
Type in the JTextField.
Choice 3
Activate the cursor in the JTextField.
Choice 4
Hit <RETURN> while the cursor is in the JTextField.
Choice 5
Hit the spacebar while typing in the JTextField.
double-buffering
public class TimerTest implements ActionListener{
public static void main(String[] args){
    TimerTest test = new TimerTest();
    javax.swing.Timer timer = new javax.swing.Timer(100,test);
public void actionPerformed(ActionEvent ev){
    System.out.println("Timer ticked.");
Given the above sample code, what is the result when the code is run?
Choice 1
The words "Timer ticked." are printed to the console once after 100 milliseconds.
Choice 2
The words "Timer ticked." are printed to the console every 100 microseconds.
Choice 3
The words "Timer ticked." are printed to the console every 100 seconds.
Choice 4
The words "Timer ticked." are printed to the console every 100 milliseconds.
Choice 5
Nothing, the Timer is not started.
1. JSlider slider1 = new JSlider (JSlider.VERTICAL, 0, 100, 50);
2. slider1.setPaintTicks(false);
3. slider1.setMajorTickSpacing(10);
4. slider1.setMinorTickSpacing(2);
What changes do you have to make to the above Sample code so that there are six Major Ticks and four Minor ticks between each Major Tick?
Choice 1
Replace line 3 with slider1.setMajorTickSpacing(17);
Choice 2
Replace line 2 with slider1.setPaintTicks(true);
Replace line 3 with slider1.setMajorTickSpacing(17);
Replace line 4 with slider1.setMinorTickSpacing(5);
Choice 3
Replace line 3 with slider1.setMajorTickSpacing(5);
Replace line 4 with slider1.setMinorTickSpacing(4);
Choice 4
Replace line 2 with slider1.setPaintTicks(true);
Replace line 3 with slider1.setMajorTickSpacing(20);
Replace line 4 with slider1.setMinorTickSpacing(4);
Choice 5
Replace line 4 with slider1.setMinorTickSpacing(6);
   Which one of the following defines a set of three JRadioButtons (b1, b2, and b3) so that only one JRadioButton can be selected at a time?
Choice 1
ButtonGroup g = new ButtonGroup();
g.add(b1); g.add(b2); g.add(b3);
Choice 2
b1.group(true); b2.group(true); b3.group(true);
Choice 3
JRadioButton jbs[] = {b1, b2, b3};
ButtonGroup g = new ButtonGroup(jbs);
Choice 4
The default behavior of JRadioButtons is such that only one can be selected at a time as long as they are in the same Container.
Choice 5
ButtonGroup g = new ButtonGroup(b1, b2, b3);
Sample Code
public static void main(String args[]){
What is the role of the method in the code above?
Choice 1
To provide a place for initialization code when instantiating the current class.
Choice 2
It is the first method run when a class is run with the Java Interpreter.
Choice 3
It serves no specific function. It is a residual method from Java 1.0.
Choice 4
It is the first method that the Java Compiler converts to bytecode when creating a .class file.
Choice 5
To process command-line parameters when running the Java Interpreter
How do you create a menu item, Save, with a shortcut key of Ctrl+S?
Choice 1
You have to override the KeyPressed event of the top level Frame and handle the Ctrl+S to call the menu item's actionPerformed.
Choice 2
JMenuItem save = new JMenuItem("Save");
save.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_S,Event.CTRL_MASK));
Choice 3
JMenuItem save = new JMenuItem("Save");
save.enableShortcut(KeyEvent.CTRL_KEY + KeyEvent.S);
Choice 4
JMenuItem save = new JMenuItem("Save");
save.setMnemonic("Ctrl+S");
Choice 5
JMenuItem save = new JMenuItem("Save");
save.addShortcutKey( new KeyStroke(KeyStroke.S | KeyStroke.CTRL_KEY) );
GridBagConstraints gbc1 = new GridBagConstraints(1,1,2,1,1,3,10,1,new Insets(5,5,5,5),1,1);
gbl.addLayoutComponent(jb,gbc1);
In regards to the above code, which one of the following indicates jb's grid position?
Choice 1
Grid position 2,1
Choice 2
Grid position 1,2
Choice 3
Grid position 1, 1
Choice 4
Grid position 10, 1
Choice 5
Grid position 1, 3
GridBagConstraints gbc1 = new GridBagConstraints(1,1,2,1,1,3,10,1,new Insets(5,5,5,5),1,1);
gbl.addLayoutComponent(jb,gbc1);
In regards to the above code, which one of the following indicates jb's grid position?
Choice 1
Grid position 2,1
Choice 2
Grid position 1,2
Choice 3
Grid position 1, 1
Choice 4
Grid position 10, 1
Choice 5
Grid position 1, 3
Which one of the following is necessary when changing an Applet to a standalone application?
Choice 1
Add a no-argument constructor.
Choice 2
Remove the init(), start() and stop() methods.
Choice 3
Remove "extends JApplet" or "extends Applet".
Choice 4
Add a main() method.
Choice 5
Change the import statement so that it imports an Application container rather than Applet or JApplet.
Which one of the following adds the String "Java" to the JComboBox jcb?
Choice 1
ComboBoxModel cbm = jcb.getModel();
cbm.addItem("Java");
Choice 2
jcb.setText("Java");
Choice 3
ComboBoxModel cbm = jcb.getModel();
cbm.add("Java");
Choice 4
jcb.add("Java");
Choice 5
jcb.addItem("Java");

I'll have a go but I am not saying they are all correct...
Question 1.
Which one of the following converts the Image i into the BufferedImage bi?
Choice 3 (assuming this implements the imageobserver interface)
bi = new BufferedImage(i.getWidth(this), i.getHeight(this), 1); //1 is BufferedImage.TYPE_INT_RGB
Graphics2D g = (Graphics2D)
bi.createGraphics();
g.drawImage(i,0,0,this);Good luck with your homework...
nes
Question 2.
CardLayout
BorderLayout
FlowLayout
GridBagLayout
GridLayout
Which one of the following indicates all of the layout managers (from the list above) that allow you to set the space between the components from an instance of the LayoutManager itself?
Choice 4
BorderLayout,
FlowLayout,
GridLayout
(GridBagLayout uses GridBagConstraints to decide component spacing, card layout does not provided component spacing due to the deck nature used)
Question 3.
JFrame jf = new JFrame();
jf.setSize(400,400);
JTextField jtf = new JTextField("JTextField");
JButton jb = new JButton("JButton");
jf.getContentPane().setLayout( new FlowLayout(FlowLayout.LEFT,1,2));
jf.getContentPane().add(jtf);
jf.getContentPane().add(jb);    Which one of the following indicates the positions of the JTextField jtf and JButton jb relative to the JFrame and each other?
Choice 3 jtf is in the top-left corner of the JFrame with jb 1 pixel to the right of it.
Question 4
public void drawText(Graphics2D g, String text)
     Font f = new Font("Century Gothic", Font.BOLD, 10);
     g.setFont(f);
     g.drawString(text, 20, 20);
}    Given the above sample code, what happens if the "Century Gothic" font is NOT available?
Choice 5 A default Font object is returned and is used
Question 5.
How must do you interact with a JTextField in order to generate an ActionEvent?
Choice 4 Hit <RETURN> while the cursor is in the JTextField.
Question 6.
public class TimerTest implements ActionListener
     public static void main(String[] args)
           TimerTest test = new TimerTest();
           javax.swing.Timer timer = new javax.swing.Timer(100,test);
     public void actionPerformed(ActionEvent ev)
          System.out.println("Timer ticked.");
}    Given the above sample code, what is the result when the code is run?
Choice 5 Nothing, the Timer is not started.
Question 7.
1. JSlider slider1 = new JSlider (JSlider.VERTICAL, 0, 100, 50);
2. slider1.setPaintTicks(false);
3. slider1.setMajorTickSpacing(10);
4. slider1.setMinorTickSpacing(2);    What changes do you have to make to the above Sample code so that there are six Major Ticks and four Minor ticks between each Major Tick?
Choice 4 Replace line 2 with slider1.setPaintTicks(true); Replace line 3 with slider1.setMajorTickSpacing(20); Replace line 4 with slider1.setMinorTickSpacing(4);
Question 8.
Which one of the following defines a set of three JRadioButtons (b1, b2, and b3) so that only one JRadioButton can be selected at a time?
Choice 1 ButtonGroup g = new ButtonGroup(); g.add(b1); g.add(b2); g.add(b3);
Question 9.
Sample Code
public static void main(String args[]){ }
TYPO - should be public static void main(String[] args){ }
What is the role of the method in the code above?
Choice 2 It is the first method run when a class is run with the Java Interpreter.
Question 10.
How do you create a menu item, Save, with a shortcut key of Ctrl+S?
Choice 2 JMenuItem save = new JMenuItem("Save");
save.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_S,Event.CTRL_MASK));
Question 11.
GridBagConstraints gbc1 = new GridBagConstraints(1,1,2,1,1,3,10,1,new Insets(5,5,5,5),1,1); gbl.addLayoutComponent(jb,gbc1);
In regards to the above code, which one of the following indicates jb's grid position?
Choice 3 Grid position 1, 1
Question 12
Which one of the following is necessary when changing an Applet to a standalone application?
Choice 1 Add a no-argument constructor.
Choice 2 Remove the init(), start() and stop() methods.
Choice 3 Remove "extends JApplet" or "extends Applet".
Choice 4 Add a main() method.
Choice 5 Change the import statement so that it imports an Application container rather than Applet or JApplet.
mmm. not a good choice of answers. look at the following link...
http://forum.java.sun.com/thread.jsp?forum=57&thread=218096
Question 13.
Which one of the following adds the String "Java" to the JComboBox jcb?
Choice 5 jcb.addItem("Java");

What is the correct format of filepath string on Mac os x?

I am trying to retrieve a file from Mac os x by:
File file=new File(filepath);
My boot volume name is "myVol", and filepath is "/myVol/opt/ab.txt". However, when I provide this path, the file is not found. I just figured out that if I use "/opt/ab.txt" the correct file can be found!!
Now, if I have a shared volume on my machine(I got it by menu "Go-->Connect to Server..."), whose name is "Mac Share", the filepath should be something "/Mac Share/test/123.txt". File file=new File("/Mac Share/test/123.txt") can not find the file. It looks like that it's trying to find 123.txt from /myVol/Mac Share/test directory, which doesn't exist. I even tried "//MacShare/test/123.txt", "Mac Share/test/123.txt", etc., and none of them worked!!
If you know the correct format to specify the filepath on Mac OS x, please give me help!!!!
Thanks in advance.

I don't know the exact answer to your question, but you can probably figure it out on your own like:
1) Create a File object that represents an existing file. Play around with the path until the file can be found.
2) Now that you have a File object representing a valid, existing path, use MyFile.getAbsolutePath() to see what the full path string is. MyFile.getCanonicalPath() might provide some answers as well.
Whatever getAbsolutePath() returns is the correct format for the file path string.

What is the correct procedure for upgrading to aperture 3.4

I am working in South Sudan and am shortly going to be in a place where I can download all the updates. The last time I did an update was around 2 weeks ago.
I presume that there will be updates for Mountain Lion, iPhoto and Aperture, plus a whole pile of iOS updates. From the support questions I see that there is a number of people having problems.
I presume that the first thing to do will be to rebuild the library of aperture.
What is the correct procedure after that?

If I do an upgrade through AppStore, and find it does not work, do I uninstall first by removing to trash? What do you mean by revert to an earlier version, and which previous version of Aperture should I use.
Neville,
So you did buy Aperture from the AppStore?
Then move the Aperture application to the Trash, but do not empty it, just in case
Sign into the AppStore and reinstall. In this case you do not need to revert to an earlier version. If the AppStore installer does not find an Aperture in your Applications folder, it will have to make a full install, and no incompatible frameworks should remain, as is the problem with the partial upgrades right now.
Yes, I have a bootable clone,
And have you checked, if you really can boot from your clone? Just being very cautious.
Do you use facebook? Some posters are having problems, even after reinstalling, if the want to publish to Facebook. Post back, if you encounter that problem.
Good Luck
Léonie

What are the correct steps for installing Oracle Entitlement Server SSM?

Can somebody explain what are the correct steps to install OES SSM 10.1.4.3? I have installed OES admin 10.1.4.3 and applied the CP2 patch. it is allowing me to open Entitlement Administration, where I can define the policy.
Is it sufficient to have this Entitlement Admin to call the policy from BPM? Do I need a SSM ?
When I try to configure Java SSM using ConfigTool.bat -process myssm_config.properties I am getting the following error
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
If yes, what are the correct steps of installation ?
I am getting the errors while configuring the Java SSM.
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

Update my app. What is the correct procedure for updating an app/folio?

I designed a folio in Indesign CS6 and created an app of the folio in adobe dps and succesfully uploaded it to the app store. Now I want to update my app. What is the correct procedure for updating an app/folio?

no, just update your content and recreate the Single Edition App. Your certificate should still be valid so there is not need to recreate these.
... your App ID absolutely need to be the exact same one you used for the first version if you want to make sure this is an update.

What is the correct file version?

Similar Messages

Maybe you are looking for