What is the correct wpa for hp photosmart 5514e all in one printer b 111h

What is the correct WPA for HP Photosmart 5514e All in one Printer B111h

Hi,
The correct WPA one is the one only you (or relatives/friends) know. You may forget therefore you have to logon to you wireless router to find out.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Looking for Print Server for HP Photosmart C4483 All-in-One Printer

I am looking for Print Servers that I can use with 'HP Photosmart C4483 All-in-One Printer' for both 'Printing and Scanning'. I'm not sure if this Printer is Network Ready or Network Capable, kindly advice.

Hello Merole
As I understand it you can print color everywhere but from MS Word 2013? If this is the case try the steps I have outlined below to see if they resolve your issue:
On the View tab, in the Color/Grayscale group, click Black and White.
On the Black and White tab, in the Change Selected Object group, click the settings that you want.
I hope this helps resolve your printing issue. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Driver for HP Photosmart C6380 all-in-one printer

Can not get the driver softaware to install on windows 8.1. Get error message file can not be found. Found solution to change .dat file wxtensions in the Windows folder. But the scan does not find any hpoins*.dat or hpwins.*
Any suggestions.
This question was solved.
View Solution.

Hello vcer,
Welcome to the HP Support Forums!
Sorry to hear about the install issues on Windows 8.1 for your C6380, that document you got the information regarding those file extension is usually the fix.
I have found that a lot of new Windows 8.1 computer are coming pre-loaded with McAfee, is this the Anit-Virus on your computer? If so, disable it then try to install the software. I have had good results with that step in the past.
If it is not the Anti-Virus software installed, what is?
Thanks for posting your question here.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

What is the correct cable for iMac 11,2 Intel core i3, mini dvi to vga or mini display port to vga?

What is the correct cable for iMac 11,2 Intel core i3, mini DVI to VGA or mini display port to VGA to hook up to projector? Thanks!

mini-DisplayPort.
Regards.

Update my app. What is the correct procedure for updating an app/folio?

I designed a folio in Indesign CS6 and created an app of the folio in adobe dps and succesfully uploaded it to the app store. Now I want to update my app. What is the correct procedure for updating an app/folio?

no, just update your content and recreate the Single Edition App. Your certificate should still be valid so there is not need to recreate these.
... your App ID absolutely need to be the exact same one you used for the first version if you want to make sure this is an update.

What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

I can not remotely access my Windows Home Server from outside. What are the correct settings for my WRT54GS?

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

I have a hp photosmart c4795 all in one printer and i need the driver and software for vista os.

install is for a gateway laptop NV5214U. I did asearch on hp website but it responded the it could not find any drivers for the hp photosmart C4795 series all-in one printer.HELP

Ok from here: http://support.hp.com/us-en/product/HP-Photosmart-C4700-All-in-One-Printer-series/3794613/model/3940...
First, select your operating system Microsoft Windows Vista (64-bit).
Click Submit.
Click the blue Download button.
Click Next, then follow the prompts for the HP Download and Install Assistant.
Let me know if you need any more help or if this solves your problem!
Thanks,
-hjs_19 *I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

Hi folks,
I've searched many threads and found some directions to remedy this, tried them and have had no luck.
I'm running Windows 7. All updates are current. When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine. Fast forward a year and Solution Center stopped working.
Uninstalled all HP software to reinstall. I was only able to reinstall HP Update. I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center. The installation stops abruptly after "installing updates".
I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
Thanks,
Alex
This question was solved.
View Solution.

Hi jerseyal,
I hate to hear you are having issues. What suggestions have you tried? Did you get an error when installing? How are you connecting the device? Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
If you are still experiencing the issue the steps below may help resolve it.
Try using the scrubber built into the software, then reinstalling from the current download available on the website.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use the following tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers Driver Link
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
3. Once the download is done extracting, cancel the download. Driver Link
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use the following tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download the full feature software and drivers Driver link
15. Run the download to reinstall the printer
Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Purchased an HP Photosmart 5520 all in one printer last year and a Macbook Pro in Jan. They worked together up to June. In Sept. when I tried to print wirelessly, it would not print. The laptop had been updated. Tried to update the printer via HP,couldn't

I have an HP Photosmart 5520 all in one printer and a MacBook Pro. Bought the MacBook Pro in Jan 2013 and the printer in Dec 2012. I was able to print to the wireless printer up until June 2013. In September, when I tried to use them together, I could not print. During the period between June and Sept., my laptop software was updated. I have tried to update the HP software on my laptop, but could not. What can I do to use this printer with my MacBook Pro? Please help!

The MacBook Pro is running at least 10.7.

Entering a "$" in the SSID password when setting up an HP Photosmart 2710 all-in-one printer

Hello,
I have a Photosmart 2710 all-in-one printer, and I am trying to set it up wirelessly. However, my SSID as a "$" in the password, and I can't find any way to enter this symbol in the wireless setup on the printer. Also, when I try to run the HP Printer setup wizard I downloaded from the HP support site, it says this printer is not supported by the wizard?
Can anyone help?
Thanks,
jmmain1

You must change your wireless password in the router to not conntain any special characters. Once done, go back and input the password in the printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Photosmart C7280 All In One printer not campatible with windows 8.1

I have an old Photosmart c7280 all in one printer. I bought a new computer that has windows 8.1. HP doesn't
have software or drivers that can make this printer compatible with my new computer. What can I do besides buy a new prfnter?

Hi,
Please download the following Software and Derivers and install on your new Windows 8.1 machine:
http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am unable to stop auto delivery of apps. on HP Photosmart 5520 all in one printer

I am unable to stop auto delivery of apps. on HP Photosmart 5520 all in one printer
This question was solved.
View Solution.

To add on to what sabertooth04 stated, here is a link to a document that addresses print apps for your model of printer. Click on the drop down titled "Managing Scheduled Delivery Print Apps" and the option to cancel or remove an app will be available for you to click on and review the steps to remove that app . I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Are there any updates so i can use my HP Photosmart C4780 All in One Printer wirelessly?

just wondering..are there any updates for the iMac with OS X (10.8.2) so I can use my HP Photosmart C4780 All in One (Print,Scan,Copy)?

Hi,
An HP Full Feature Software is not available for Mountain Lion, therefore the Wireless configuration is tricky and cannot be done through the software.
To connect the printer to your wireless network you will need to create a temporary wireless ad hoc connection, then the wireless connection to your router can be configured via the EWS page:
Step one: Restore the printer's network default settings
Touch the ATM button ( ) next to Wireless / Scan .
Touch the ATM button ( ) next to Wireless Menu .
Touch the ATM button ( ) next to Wireless Settings .
Use the up and down ATM buttons ( ) to select Restore Network Defaults , and then press OK .
Touch the ATM button ( ) next to Yes to confirm your selection.
Step two: Networkly connect the Mac to the printer by creating a temporary ad-hoc connection
From the Mac, click the Wi-Fi icon.
Click Join other network.
Click Show Networks.
Select the printer's SSID, it should be listed as HPSETUP or should contain HP or C4700 within its name.
Click Connect
Allow two-three minutes to fully establish the network connection.
Step three: Connect the printer to your router via the EWS page
Open Safari.
Click the Bookmarks icon ()
Click Bonjour.
Double click the printer name, the EWS page appears.
Open the Networking tab.
From the left pane select Wireless.
Click the Start Wizard button and follow the steps to connect the printer to your router.
Step four: Reconnect the Mac to your router
From the Mac, click the Wi-Fi icon.
Click Join other network.
Click Show Networks.
Select your router SSID.
Click Connect
Allow two-three minutes to fully establish the network connection.
Now the printer should be connected to your network.
Open Print & Scan, click the Plus sign and add the printer listed as Bonjour.
btw John Galt - I this it should be spelled as OS X, please correct me if i'm wrong.. ;-)
Hope that helps,
Shlomi

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

What is the correct wpa for hp photosmart 5514e all in one printer b 111h

Similar Messages

Maybe you are looking for