What is the cracking sound when I open my MacBook Pro lid?

When opening and closing MacBook Pro lid, it makes a cracking sound. Does anyone have an idea what it could be? It's not the hard drive because Geek Squad ran a test and everything passed.

Try this:  Loosen the screws in the rear of the MBP (by the hinge) and re-torque them.  See if that will alleviate the problem. You will need a 00 Philips driver.
Ciao.

Similar Messages

  • HT3918 what is the beep sound when turning on computer after replacing ram

    what is the beeping sound when turning on imac after replacing memory/RAM ?

    This is the RAM capabilities and specs:
    Maximum Memory
    16 GB
    Memory Slots
    4 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
    This link, How to remove or install memory, will provide the source to how to install RAM in your model to be sure you do it properly. The modules need to be pressed fairly hard to assure they are properly seated.

  • When I open my MacBook Pro for the first time each day, I find condensation on the glass.  What can I do to prevent the condensation?

    When I open my MacBook Pro for the first time each day, I find condensation on the glass.  What can I do to prevent the condensation?

    This thread and all the followups are hilarious, if it weren't such a serious problem. OP, you may want to add a bit more information on how this drippy screen problem occurs: where do you live, what are the weather conditions, what are you doing with the Mac when it occurs, etc.
    Yes, extreme moisture, to the extent of causing visible condensation, is Very Bad News for any electronic device, and more so with one that isn't tropicalized like the Mac. Besides trying to avoid subjecting it to such extreme temperature changes, using some kind of desiccant to absorb close range moisture and avoidint its use until it dried out, I can suggest placing some kind of absorbent material between the display and the keyboard to prevent the moisture on the glass from finding its way into the computer. Like the protective poliethylene foam protector that came with the Mac when new. Or something like RadTech's ScreenSavrz: http://www.radtech.us/Products/NotebookScreenSavrz.aspx

  • When i open my macbook pro- the screen lights up and then goes black-

    When I open my Macbook pro- the screen lights up and then goes black- keybook stays backlite- can not get screen to come back on. Must reboot-
    thoughts-?? Macbook is 6 months old and on second hard drive ( failure after 45 days).

    Hey! exact same thing happens to me... I use the keyboard shortcut to turn off the screen which is ctrl - shift - eject button. Then just poke a key and it wakes up again fine, it doesn't fix the problem but at elast you don't have to reboot. x

  • No sound when I connect my Macbook pro (2012) to TV via HDMI!

    Hi! I have a problem with the sound when I connect my Macbook pro (bought in 2012) to a Phillips HD TV. The strange thing is that it only happens with some videos (specially youtube videos) but the sound works perfectly with films and audio files I have in my computer, and also when I watch TV online (Eurosport player for instance and other similar applications). It's even stranger because it doesn't happen all the time; last week I tried many times to watch some youtube videos and after unplugging the HDMI cable it seemed to work. As I said, with Eurosport player and many films downloaded in my macbook I don't have this problem (sound is ok all the time), and this is why I'm really confused. I suppose it's not a connection problem, otherwise I wouldn't have sound in any video, right? I've tried two different HDMI's cables but nothing has changed. Please, someone help me, as I can't figure out what's happening. Thank you very much!

    Well Im not sure what the fix is for your problem, but can you please open up the sound preference next time you connect the philips tv, and make sure that sound output is set to hdmi out. Then try and play your video's etc and see if they are affected. 
    I can tell you I get a similar problem when, for example, I have a youtube window open and then connect the external display. The youtube video will not sound out through the cable, however if i refresh the window it works. Also the same when I use bluray player on mac, I have to close it and open it again for the sound to output through the external monitor.

  • When I open my Macbook Pro it shows past date

    Hi -
    Sometimes (pretty consistently lately) when I open my Macbook Pro it shows the screen that was there when I closed it, but everything is greyed.  There is a line at the bottom that is moving across and when it finishes the color goes back to normal.  But even then, the time is from when I closed it, and the computer is unresponsive.  It will sometimes sit in this state for a couple of minutes or longer.
    This is a six month old Macbook Pro and this happens pretty regularly, and has off and on since I first got it.
    Is this just no more than annoying?  I've been using Apple laptops since 2005 and never had this happen until this machine (which is my third personal one - I support two others).  Any ideas on cause?
    Thanks
    Craig

    Some users have reported solving this problem by resetting the NVRAM (PRAM.)
    If you've installed something called "iCleanMemory," or any other third-party software that is supposed to "clean" or "free up" memory, remove it according to the developer's instructions after backing up all data. Reboot and test. If there's no change, continue.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • What is the best way to transfer iPhoto from MacBook Pro to iMac?

    What is the best way to transfer iPhoto from MacBook Pro to iMac?

    the only way is Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • What is the best way to back up my MacBook Pro (OSX 10.9.5) before taking it in for service?

    What is the best way to back up my MacBook Pro (OSX 10.9.5) before taking it in for service?

    While I have nothing against Time Machine (and I do use it on some of my systems), I always make a bootable clone before taking a Mac in for service (2 actually), and I verify that clone boots before I let the Mac leave.
    SuperDuper is free for a full clone (you only pay for incremental features).
    <http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html>
    Carbon Copy Cloner provides a 1 month fully enabled demo mode before you have to buy the product or stop using it.
    <https://www.bombich.com/>

  • What is the cost of a battery for a MacBook Pro purchased in Mid 2009?

    What is the cost of a battery for a MacBook Pro purchased in Mid 2009?

    99 bucks from OWC http://eshop.macsales.com/item/NewerTech/BAP13MBU65V/
    DIY guide https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2009+Battery+Replac ement/1332

  • What is the best 500GB HDD for a 2007 macbook pro

    what is the best 500GB HDD for a 2007 macbook pro. This is a pre unibody machine.
    I am upgrading at the minute and can't make my mind up. I need a 7200rpm drive, but have heard some stories concerning overheating etc.
    These are the drives I am looking at: Seagate Momentus, Hitachi Travelstar and Western Digital all 500GB, running at 7200rpm.

    If you haven't already, you might look a the user comments at http://www.newegg.com on those hard drives. If you don't get other comments here, you might post in the MBP discussion (this is the iMac discussion) at https://discussions.apple.com/community/notebooks/macbook_pro

  • What is the best protective case for 2011 13" Macbook Pro

    What is the best protective case for 2011 13" Macbook Pro (that can withstand an active 4 year old :).   My 4 year old plays with the teaching apps on my iPhone 4 in the otterbox case and its great - the bulkiness of the otterbox not an issue and I love being able to give the phone to him and feel completely comforatable. I would love to find something to protect my Macbook Pror. Thanks for any help!! 

    I would definitely go for a Hardsheel or a Perforated Hardshell Case

  • Does anyone know what is the exact HDD model and specs for MacBook Pro (15-inch, Mid 2012)? Thanks

    Does anyone know what is the exact HDD model and specs for MacBook Pro (15-inch, Mid 2012)? Thanks.

    Thanks for responding me,
    I just got this info from the link that you provided me but is there any model name or model number for it?
    or any 2.5 would be work?
    Thanks again.

  • What is the best program to run on my MacBook Pro to clean it up?

    can anyone tell me what the best program to run on a MacBook Pro to clean it up, make it run faster?

    When you next have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • What is the best camcorder to buy using my MacBook Pro

    I just purchased the MacBook Pro (1st time Mac owner).  I am wondering if there is a particular camcorder that would work best for making videos using iMovie.  I have purchased a Sony Handycam AVCHD and googled the reviews.  It seems people have some problems using this camcorder with the MacBook.  Any suggestions.  1.  Will the camcorder I bought be just fine or do I need to return this and purchase a different one.  I just want to record my kids activities and make home movies to send to their grandparents.  Thanks

    Lilypig wrote:
    Which is the best mouse to use with my macbook pro?
    "It depends" is the correct answer.
    If you love using gestures, you'll want a Magic Mouse or Magic Trackpad.
    If you love high precision, a trackball is often preferable to a mouse.
    If you love modified mouse actions, a mouse with extra programmable buttons is a good idea.
    If you love gaming, a responsive high-resolution gaming mouse is probably best.
    If you love graphics/art, it is possible no mouse is best; instead you want a pressure-sensitive stylus and tablet for maximum control over painting and retouching.
    No one else can tell you what the best is, unless they share your preferences exactly.

  • When I open my macbook pro it's not automatically connected to the wifi at home

    Hello,
    When I open my mac it's just usally is connected to the wifi itself but now I keep getting that I now have to wait 10 seconds or longer after opening my mac to have my mac connected to the wifi ! Has it something to do with Mavericks ?
    Kind regards

    Some users have reported solving this problem by resetting the NVRAM (PRAM.)
    If you've installed something called "iCleanMemory," or any other third-party software that is supposed to "clean" or "free up" memory, remove it according to the developer's instructions after backing up all data. Reboot and test. If there's no change, continue.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for

  • Start up problem for CQ56-219WM

    At start up red screen blinks with message press escape key for stop up menu. Performed all test which passed. Cannot perform a system recovery. Nothing happens

  • Sync BPM , SOAP

    Hello, I've got another problem and hope someone could give me a hint, because reading some blogs concerning BPM and trying to adapt the things to my problem did not really help me. The last days I created a sync process that gets information via htt

  • WLC 8500 SSO HA not working

    Hi there, We're running AireOS 8.0 in a  WLC 8500 series and we're getting problems trying to enable HA scenario. These are the scenarios we have tested: management interface tagged + switchport trunk tagged + HA tagged + switchport trunk tagged = SS

  • Users cannot View Calendar entry Details

    We have been getting reports that some users are no longer able to see the details of an appointment on another users calendar.  This is something that all users have been able to do, but several users have now been asking us why they can no longer s

  • WorklistManager in real life?

    Hi ! After a day of kicking and screaming, I am still unable to get the WorkListManager BPEL process shipped in the samples/util directory to work. Can anyone give an official statement whether this is supported? Thanks, Tal Brown EMEA Support