What is the difference between"export audio and "bounce"?

What is the difference between the "export audio" and "bounce" functions?
Do plug ins get saved with the created BWF(broadcast wave files)in the "export" function?
Or is the "bounce" method the required function to enable plugins embedded in BWF files?
Also I noticed that the "convert to SDII file" produces files not readable by ProTools.
It was my understanding that using the convert to SD II files via the audio bin is used, it would produce BWF files for use in Protools.And if you use symbols like / in your track names the files won't get converted or bounced!
Also would it not be cool if LE8 had a feature that could render BWF files small enough to send via internet file sharing and transfer apps, in other words a built in file transfer feature. Am I asking for too much.

Export audio is good to move the tracks to another application or computer for further editing.
Bounce renders the mix into a stereo track in 2 basic ways: PCM, i.e. uncompressed, or compressed (like AAC, mp3 etc.).
PCM can be AIFF, Broadcast WAV (even if it's written only WAV those are BWF), and SDII that's the standard file type of ProTools.
Note that PT doesn't use interleaved stereo files but two separate files for left and right channels, i.e. filename.l and filename.r and if you save in this way PT will accept those files for sure.
Uncompressed audio files cannot be compacted (in fact, that's why they're called uncompressed).
These days there are a lot of Internet services that permit to transfer several Gb (up to 5) for free.
If you are thinking of something like Digidelivery then you should put your attention towards Digi's products, not Apple's ones.
cheers
rob

Similar Messages

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

What's the difference between FM 'UPLOAD' and FM 'ALSM_EXCEL_TO_INTERNAL_T'

What's the difference between FM 'UPLOAD' and FM 'ALSM_EXCEL_TO_INTERNAL_TABLE'
thanks!

hi,
Generally FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' is used for reading Excel sheet i.e, either row wise or column wise . where as WS_UPLOAD will read the entire data in to an internal table in a file format.
for illustration as how it is used check this out
PARAMETER p_infile like rlgrap-filename.
*START OF SELECTION
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = p_infile
            i_begin_col             = '1'
            i_begin_row             = '2' "Do not require headings
            i_end_col               = '14'
            i_end_row               = '31'
       tables
            intern                  = itab
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
if sy-subrc <> 0.
    message e010(zz) with text-001. "Problem uploading Excel Spreadsheet
endif.
http://www.sapdevelopment.co.uk/file/file_upexcelalt2.htm
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = gd_file
      has_field_separator     = 'X' "file is TAB delimited
    TABLES
      data_tab                = it_record
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
    IF sy-subrc NE 0.
      write: 'Error ', sy-subrc, 'returned from GUI_UPLOAD FM'.
      skip.
    endif.
http://www.sapdevelopment.co.uk/file/file_uptabpc.htm
Regards,
Santosh

What's the difference between "My Contacts" and "All Contacts"?

What's the difference between "My Contacts" and "All Contacts"?
I have no other account other then my iCloud account (from what I can tell), but "My Contacts" has a significantly smaller number of contacts then "All Contacts".
What's the difference?

Thanks for posting the screenshots, that's helpful. I didn't realize that you were looking at your groups.
"All Contacts" include (as the name implies) all of your contacts. Below that are any contact groups that you may have defined. These would normally be such things as "Work", "Personal", "Doctors", etc.; any groups that you find useful to define. These contain subsets of the "All Contacts" group.
At some point, perhaps inadvertently, you must have created a group called "My Contacts", or imported it to iCloud from your computer. At the time this may have contained all of your contacts and would have had the same number of contacts as the "All Contacts" group. Then over time you probably added 433 additional contacts that were never part of the original "My Contacts" group, resulting in an "All Contacts" group that contained 1465 contacts.
If you don't have any use for the "My Contacts" group, you can delete it by clicking on it on the left sidebar, click the gear icon on the lower left and choose Delete. If you're concerned about doing this, you can make a backup of this group first by selecting it on the left sidebar, clicking on a single contact within the group, pressing Control-A to select them all (they should all be highlighted), then clicking the gear icon and choosing Export vCard. This will create a .vcf file that can later be imported back to iCloud if you ever need to (by clicking the gear icon again and choosing Import vCard).

What is the difference between interactive report and alv interactive repor

what is the difference between interactive report and alv interactive report
could u plz explain clearly.

Hi Rajesh,
interactive report or alv interactive report , both are same but except the viewer, Abap List Viewer (ALV).
Here in i am placing a sample simple ALV Interactive report.
Just double click on the customer number to go to the next screen.
*& Report ZKAL_ALV_INTERACTIVE_1                                      *
REPORT ZKAL_ALV_INTERACTIVE_1                  .
TYPE-POOLS: SLIS.
TYPES: BEGIN OF TY_KNA1,
          KUNNR TYPE KUNNR,
          NAME1 TYPE NAME1,
          ORT01 TYPE ORT01,
        END OF TY_KNA1.
TYPES: BEGIN OF TY_VBAK,
          VBELN TYPE VBELN,
          ERNAM TYPE ERNAM,
          ERDAT TYPE ERDAT,
          NETWR TYPE NETWR,
          WAERK TYPE WAERK,
         END OF TY_VBAK.
&--WORK AREA & TABLE DECLARATION--
DATA: W_KNA1 TYPE TY_KNA1.
DATA: T_KNA1 TYPE STANDARD TABLE OF TY_KNA1 INITIAL SIZE 1.
DATA: W_VBAK TYPE TY_VBAK.
DATA: T_VBAK TYPE STANDARD TABLE OF TY_VBAK INITIAL SIZE 1.
&--FIELDCAT TABLE & WORK AREA--
DATA: W_FCAT TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_FCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT1 TYPE SLIS_T_FIELDCAT_ALV.
&--EVENT TABLE AND WORK AREA--
DATA: W_EVENTS TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS TYPE SLIS_T_EVENT.
DATA: W_EVENTS1 TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS1 TYPE SLIS_T_EVENT.
&--COMMENT TABLE & WORK AREA--
DATA: W_COMMENT TYPE SLIS_LISTHEADER.
DATA: T_COMMENT TYPE SLIS_T_LISTHEADER.
DATA: W_COMMENT1 TYPE SLIS_LISTHEADER.
DATA: T_COMMENT1 TYPE SLIS_T_LISTHEADER.
&----APPENDING FCAT -
W_FCAT-COL_POS = 1.
W_FCAT-FIELDNAME = 'KUNNR'.
W_FCAT-SELTEXT_M = 'CUST. NO'.
W_FCAT-HOTSPOT = 'X'.            "HOT SPOT HAND SYMBOL
W_FCAT-EMPHASIZE = 'C119'.       "FOR COLORING THE COLUMN 1
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS = 2.
W_FCAT-FIELDNAME = 'NAME1'.
W_FCAT-SELTEXT_M = 'CUST. NAME'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 3.
W_FCAT-FIELDNAME = 'ORT01'.
W_FCAT-SELTEXT_M = 'CITY'.
APPEND W_FCAT TO T_FCAT.
W_FCAT1-COL_POS = 1.
W_FCAT1-FIELDNAME = 'VBELN'.
W_FCAT1-SELTEXT_M = 'ORDER NO'.
W_FCAT1-EMPHASIZE = 'C519'.
APPEND W_FCAT1 TO T_FCAT1.
CLEAR W_FCAT.
W_FCAT1-COL_POS = 2.
W_FCAT1-FIELDNAME = 'ERNAM'.
W_FCAT1-SELTEXT_M = 'NAME OF PARTY'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 3.
W_FCAT1-FIELDNAME = 'ERDAT'.
W_FCAT1-SELTEXT_M = 'DATE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 4.
W_FCAT1-FIELDNAME = 'NETWR'.
W_FCAT1-SELTEXT_M = 'ORDER VALUE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 5.
W_FCAT1-FIELDNAME = 'WAERK'.
W_FCAT1-SELTEXT_M = 'CURRENCY'.
APPEND W_FCAT1 TO T_FCAT1.
&--APPEND COMMENTRY--
W_COMMENT-TYP = 'H'.
W_COMMENT-INFO = 'CUSTOMER DETAILS'.
APPEND W_COMMENT TO T_COMMENT.
CLEAR W_COMMENT.
&--APPEND EVENTS TABLE--
W_EVENTS-NAME = 'TOP_OF_PAGE'.
W_EVENTS-FORM = 'TOPPAGE'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS-NAME = 'USER_COMMAND'.
W_EVENTS-FORM = 'SUB2'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS1-NAME = 'TOP_OF_PAGE'.
W_EVENTS1-FORM = 'TOPPAGE1'.
APPEND W_EVENTS1 TO T_EVENTS1.
CLEAR W_EVENTS1.
W_EVENTS1-NAME = 'USER_COMMAND'.
W_EVENTS1-FORM = 'SUB3'.
APPEND W_EVENTS1 TO T_EVENTS1.
SELECT-OPTIONS: CUSTNO FOR W_KNA1-KUNNR.
SELECT KUNNR
         NAME1
         ORT01 FROM KNA1 INTO TABLE T_KNA1
         WHERE KUNNR IN CUSTNO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'BIKE'
   I_GRID_TITLE                      = 'CUSTOMER DETAILS'
   IT_FIELDCAT                       = T_FCAT
   IT_EVENTS                         = T_EVENTS
TABLES
    T_OUTTAB                          = T_KNA1 .
FORM TOPPAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT
     I_LOGO                   = 'LOGO_ALV'.
ENDFORM. "END OF TOPPAGE SUB.
FORM SUB2 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
READ TABLE T_KNA1 INTO W_KNA1 INDEX FIELDS1-TABINDEX.
SELECT VBELN
         ERNAM
         ERDAT
         NETWR
         WAERK
               FROM VBAK
               INTO TABLE T_VBAK
               WHERE KUNNR = W_KNA1-KUNNR.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'KALEEM'
   I_GRID_TITLE                      = 'LIST OF ORDERS'
   IT_FIELDCAT                       = T_FCAT1
   IT_EVENTS                         = T_EVENTS1
TABLES
    T_OUTTAB                          = T_VBAK.
ENDFORM.    "END OF SUB2.
FORM TOPPAGE1.
&--APPEND COMMENTRYOF SECONDRY SCREEN--
W_COMMENT1-TYP = 'H'.
W_COMMENT1-INFO = 'LIST OF ORDERS'.
APPEND W_COMMENT1 TO T_COMMENT1.
W_COMMENT1-TYP = 'S'.
W_COMMENT1-KEY = 'CUSTOMER'.
W_COMMENT1-INFO = W_KNA1-KUNNR.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT.
W_COMMENT1-TYP = 'A'.
W_COMMENT1-INFO = W_KNA1-NAME1.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT1
     I_LOGO                   = 'LOGO_ALV'
REFRESH T_COMMENT1.
ENDFORM.    "END OF TOPPAGE1
FORM SUB3 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
    READ TABLE T_VBAK INTO W_VBAK INDEX FIELDS1-TABINDEX.
SET PARAMETER ID 'AUN' FIELD W_VBAK-VBELN.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDFORM.
U can also find some of the useful codes on WIKI-SDN.
Reward helpful Answers.
Regds,
Kaleem.

What is the difference between FND_CONC_CLONE.setup_clean and target_clean

What is the difference between fnd_conc_clone.setup_clean and fnd_conc_clone.target_clean?
I always run setup_clean to wipe out all the information carried from source, and then run adautocfg.sh on dbTier followed by appsTeir. This will give me the clean newly cloned ebs system. But what is target_clean for? What is the difference between setup_clean and target_clean;
James

I finally go through the code and actually run the target_clean in our test system. Here is general rule, if you clone the ebs system, you only need to run setup_clean, it will clean out topology information or ebs connection information from the system. Then you run adautocfg.sh on db tier first following by adautocfg.sh on apps tier. All the topology or connection information will be populated again inside the database.
Once you have cloned the system, you do not want any printer setup info, log/out info or profile info carried from source, then you can run target_clean. For me, I do need preserve printer and profile info, so I need to export following 4 tables before running target_clean.
FND_PROFILE_OPTION_VALUES,
FND_PRINTER,
FND_PRINTER_TL,
FND_CONCURRENT_PROGRAMS
Hope this will help.
James

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

What is the difference between jsp :include and server side include

what is the difference between jsp :include and server side include(request dispatcher include method)????
i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
do suggest if u hav ny other diff in this context...

The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
- Saish

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What are the differences between ECC5.0 and 6.0 new GL functionality

Hi Experts,
What are the differences between ECC5.0 and 6.0 new GL functionality.
If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
Best Regards,
Dharani

Dear,
ECC 5.0 vs. ECC 6.0/SAP ERP 6.0
Functionality not available in the new G/L with mySAP ERP 2004 and ERP Central Component (ECC) 5.0:
Transfer prices
Statistical key figures
Euro translation
Audit Information System (AIS)
Archiving
Data retention tool
Regards,
Chintan Joshi.

What is the difference between document class and normal class

Hi,
Please let me know what is the difference between document class and normal class.
And I have no idea which class should call as document class or call as an object.
Thanks
-Actionscript Developer

the document class is invoked immediately when your swf opens. the document class must subclass the sprite or movieclip class.
all other classes are invoked explicitly with code and need not subclass any other class.

In OSX Activity Monitor, what's the difference between 'free' memory and 'inactive' memory

In OS X Activity Monitor, what's the difference between 'free' memory and 'inactive' memory. My daughters 2Gb MacBook Pro is very slow, it probably needs more memory but there is almost 1Gb of 'inactive' memory but no 'free' memory when an application is opened.
Thanks

Free RAM is the one that has not been used by any application since you started up your Mac, and inactive RAM is the one that was used by an application and it is not in use anymore.
1 GB of inactive RAM is a lot, and it may be the cause of the slowness. There are a lot of apps that allows you to turn inactive into free RAM. I use FreeMemory, but have a look at the Mac App Store.
If you are a developer, you can do that with a command you can type into Terminal:
sudo purge

What is the difference between local printing and remote printing in SAP

Hello Nation,
I would like to know what is the difference between local printing and remote printing in SAP and in what scenarios they are used ?
1.What is local printing in SAP ?
2.What is Remote Printing in SAP?
3.what is the difference between local printing and remote printing in SAP ?
Thank you in Advance.
Regards,
-Mohamed Naveen.

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

What is the difference between Business System and Business Service?

Hi
Please tell me what is the difference between Business System and Business Service...? In real time at what situation we will use Business System and in what situations we will use Business Service..? Please help me
Best Regards
Ravi Shankar B

HI,
Business system:
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
Business Service:
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
Regards,
Sudheer.

What is the Difference between AQ adpater and JMS adapter??

What is the Difference between AQ adpater and JMS adapter in BPEL11g??
In what scenarios we go for AQ and for what scenarios we go for JMS adapter???

Go for AQ when using Oracle Advanced Queueing (the database stuff).
Use JMS when using JMS (in memory of file queues)
hth,
Peter Paul

What is the difference between"export audio and "bounce"?

Similar Messages

Maybe you are looking for