What is the difference between organisation payment method and Assignment payment method?

What is the difference between organisation payment method and Assignment payment method?
As i am a new bie, i am curious to know this though it might sound a silly question.
Thank you,
Kuton

You can create an Organization payment method of any Payment type(Cash, Check, BACS, NACHA etc) under the same country.
All these will be valid payment methods on the payroll description form.
And you can even attach these to a person.
In which case you will have a Base currency (say USD) and payment currency (say GBP).
These cases are not normal and only used by people who use a single BG for paying employees in 3-4 countries.
So, unless you need to pay in different currencies, do not use it.
Cheers,
Vignesh

Similar Messages

  • In Request type, what is the difference between action 'Change user' and 'Assign object'

    Dear All,
    I have used only 'Assign Object' for my 'Change User' request type. But the standard request type has 'Change user'. So, could you suggest , what additional purpose does Change Object serve
    Regards
    Plaban

    HI Plaban
    not sure if you answered your own question here?
    Change User - by itself would allow update of address data, user parameters, defaults, etc
    Assign Object - as you mentioned roles and profiles.
    However, if assigning, I think you need to have both actions: change and assign
    I recall (ages ago) that change was only the user details and not the role or profiles. As a result, there were a few threads where people had to update the action for the request type of provisioning would not occur.
    This is something you could test
    Regards
    Colleen

  • What is the difference between on new focus and do prepare out put methods

    Hi,
    what is the difference between on new focus and do prepare out put methods.

    Hi Divya,
    DO_PREPARE_OUTPUT method is triggered each time the view is prepared after each event. Normally we redefine this method in order default the initial values based upon the parameter iv_first_time = 'X'. There can be certain other scenarios like putting data validations where this method can be helpful.
    For details on ON_NEW_FOCUS, refer to this [thread|on_new_focus event;
    Thanks
    Vishal

  • What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

    Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
    So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
    All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
    I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff" 
    O.o
    A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
    Here is a summarized history of my relationship with Wine:
    Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
    'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
    Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
    So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

    ## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
    For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
    If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
    http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
    The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
    For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
    First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
    Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
    Third, you will need to get MacPorts and configure it. The tutorial should have this data.
    When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
    After obtaining wine, to run a program, open the terminal.app window.
    cd desktop/XYZ/ZYZ\ WRQ
    The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
    wine th11e.exe
    Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
    It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
    If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

  • What is the difference between Component,Server,Tool and Software?

    HI,
    What is the difference between Component,Server,Tool and Software?
    SHABEER

    Hi
    Every individual part that constitutes in making an SAP System is called a COMPONENT.e.g DB instance, Java CI, ABAP CI etc
    SERVER is the actual composition of different components of SAP.e.g. a database alongwith can instance would constitue an application server.
    TOOLS are the products from different organisations (SAP or Non SAP) that can be used for different functionalities like keeping a check on jobs, monitoring of the system , e.g Tivoli
    SOFTWARES are a kind of tool that help you to bring up results from the system in a user acceptable format. These are utilities that act as interfaces between the user and the system.
    regards
    Chen

  • What is the difference between qued delta  update and serialized delta upda

    what is the difference between qued delta  update and serialized delta update?

    Hi Ks Reddy,
    Queued Delta:
    In case of Queued delta LUW's are posted to Extractor Queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. Generally we prefer Queued Delta as it maintain the Extractor Log which us to handle the LUW's which are missed.
    Direct Delta:
    In case of Direct Delta LUW's are directly posted to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUW's are directly posted to Delta Queue (RSA7) the application is kept waiting untill all the enhancement code is executed.
    Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
    https://websmp102.sap-ag.de/~sapdownload/011000358700007535452002E/HOWTOCREATEGENERICDELTA.PDF (need id)
    http://help.sap.com/saphelp_bw33/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
    Business Intelligence Performance Tuning [original link is broken]
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
    How to load data
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    Delta Types and methods;&#57245;
    Hope this helps.
    ****Assign Points if Helpful*****
    Regards,
    Ravikanth

  • What is the difference between generate partner profile and creat partner

    What is the difference between generate partner profile and creat partner profile ?

    Create Partner ProfilesAlthough partner profiles are usually created automatically, because of the unusual inbound and outbound profiles needed on the same system, the manual generation of certain profiles is required.
    The following subsections describe the partner profile settings for the standard client (assumed here to be ALExxxCyyy), as well as for the corresponding dummy client (assumed to be DUMxxxCyyy). The dummy client partner profiles should have been generated by the automatic generation process completed previously. Nevertheless, these should be checked to ensure that all profiles exist.
    Generation of Partner Profiles
    The following messages should be added to the 4xx-ORDR model for ALExxxCyyy to DUMxxxCyyy on the reference client:
    • ORDERS
    • ORDCHG
    • ZINVRV
    • ORDRSP
    • INVOIC
    • FIDCMT
    • The partner profiles should first be generated using the standard auto-generation procedure on the reference client (for SYNCH messages to be created).
    • This model should now be distributed to the both ALExxxCyyy and DUMxxxCyyy.
    • The partner profiles should now be generated on the client being configured (i.e. yyy) using the auto-generation procedure defined in the standard ALE configuration procedures.
    Generate partner profiles for sending system. (Can only do this if at least 1 message type exists against the sending system's LS). This automatically generates the port if the LS and RFC name are the same.
    generate partner profiles tcode BD82
    creating partner profiles tcode WE20
    &#61550; There are two methods for maintaining the partner profile:
    &#61664; Maintain partner profile manually:
    To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Target system. Under Outbound parameters, choose the Create outbound parameters icon, and enter the values for the outbound parameters according to the slide Sender: Partner Profile (outbound).
    To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Sending system. Under Inbound parameters, choose the Create inbound parameters icon and enter the values for the inbound parameters according to the slide Sender: Partner Profile (inbound).
    &#61664; Generate partner profile:
    Prerequisite: The current distribution model is distributed to all participating systems.
    In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (outbound)
    In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (inbound)
    Regards
    Vasu

  • What is the Difference between ?  new Operator and Class.forName() ???

    plz tel me ....
    what is the Difference between ? new Operator and Class.forName() ??? ........

    Class.forName(), takes the class name as parameter,
    and loads that class in memory. But it doesn't create
    any instance of that class.
    That means static methods/variables are available for
    use.
    new keyword, checks if the class is loaded, if not
    then loads that class, and then creates an instance
    of that class.Class.forName actually returns the class object for that name (class - for -name). it might load it, if the class hasn't already been loaded, but it's misleading to say that's what that method does
    your definition of 'new' is wrong, too. give the dukes back

  • What is the differences between T=0 protocol and T=1 protocol?..

    Hi friends..
    Sorry, i want to know what is the differences between T=0 protocol and T=1 protocol?..
    Which one is the best, Java Card that support for T=0 protocol and Java Card that support for T=1 protocol?..
    Thanks in advance..

    Sebastien_Lorquet wrote:
    Such protocols have NOTHING TO DO with javacard. They have been existing for YEARS before javacard was invented.
    It's just a mean to exchange data with any card. It happens to be a standard, so javacards among others use it to communicate with the host.
    the Javacard spec by itself does not know anything about how the APDUs are exchanged . It can be T=0, T=1, T=14, RS-232, GPIB, USB, ISO14443, Felica, Ethernet, Firewire, a satellite link, a deep space link, or anything you want. The comm part is the responsibility of the card operating system, which is out of scope for the javacard machine that lies onto it.
    Just because you have a convenience method in the APDU class does not mean this is real. It's up to the card / os manufacturer to define these things, it's reasonable to think they are accurate, but I can create a javacard that claims to be contactless and still will use T=0. That's arbitrary.This is not exactly true. For APDU response chaining to work on some T=0 cards (when using smartcardio that handles response chaining for the developer) we had to use some special tricks. It can also be handy to only allow certain actions on the contact interface (such as admin actions etc) to prevent unauthorised access. The [PLAID Applet|https://www.govdex.gov.au/confluence/display/PLAID/Home;jsessionid=9B9EC664A01EC13B098DDF4EE5760A0A] (developed by the Australian fegral government agency Centerlink) only allows the card to be initiliased through the contact interface.
    - T=0 requires a GET RESPONSE additional exchange only for case 4 commands or when the command provides more bytes than requested for an outgoing command. It can also require more than two exchanges if the terminal requests the outgoing data per-block.Don't forget case 2. The GET RESPONSE is at TAPDU layer and is handled internally by smartcardio/PCSC etc and is also handled by the smartcard OS.
    Leonardo, if you want to know the differences between the two, I recommend reading ISO7816-3.
    Cheers,
    Shane

  • What is the difference between string != null and null !=string ?

    Hi,
    what is the difference between string != null and null != string ?
    which is the best option ?
    Thanks
    user8729783

    Like you've presented it, nothing.  There is no difference and neither is the "better option".

  • What is the difference between a mac-book, and an I-pad?

    What is the difference  between a mac-book and an I-pad?

    The Macbook is a computer (running Mac OS X), an iPad is a tablet (running iOS). What are thinking of using it for ? The Mac is more powerful than iPad, so if you need processing power then that will be better suited for your needs. If you will mainly be using it for media (films, music), internet browsing, emails, ebooks, then an iPad would be sufficient.
    Macbook Air : http://www.apple.com/macbook-air/
    MacBook Pro : http://www.apple.com/macbook-pro/
    iPad Air : http://www.apple.com/ipad-air/

  • What is the difference between Safari 6.0 and 6.0.2?

    What is the difference between Safari 6.0 and 6.0.2?

    here is a copy of the text from Software Update
    Safari 6.0.2 is recommended for all users running OS X Lion v10.7.5
    and includes security updates.
    For more information, please visit: http://support.apple.com/kb/HT1222

  • What is the difference between Windows Workflow Activities And SharePoint Workflow Activities in Workflows?

    Hi All,
    What is the difference between Windows Workflow Activities And SharePoint Workflow Activities in Workflows?
    Thanks in Advance!

    Hi,
    Both are developed with .NET framework, per my knowledge, the biggest difference would be the environment they applied to: one for Windows platform, one for SharePoint platform:
    http://msdn.microsoft.com/en-us/library/vstudio/ms733615(v=vs.90).aspx
    http://msdn.microsoft.com/en-us/library/office/ms446847(v=office.14).aspx
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • What is the difference between Condition Type PB00 and PBXX

    Hallow all,
    Can anybody please explain, What is the Difference between Condition type PB00 and PBXX in Materials Management Pricing?
    And also please explain control or Application of both on Price determination ??
    Thanks in Advance !!!!!

    Hi,
    PB00 condition type is used for automatic pricing in PO
    PBXX condition type is used for manual pricing in PO
    In Pricing  access sequence  play a vital role . If you need pricing automatic in the PO, you have use of Access Sequences and Schema Group of Vendor.You can see the difference in both standard condition type PB00 and PBXX, where as PB00 is assigned to Access sequence(0002)but in case of PBXX no access sequense assigned.
    Regards,
    Biju K

  • *what is the difference between web flow engine and sap business workflow?*

    Hi,
    Can any please guide me by telling what is the difference between web flow engine and sap business workflow?

    >
    Arghadip Kar wrote:
    > Check this link
    >
    > http://www.workflowing.com/id35.htm#1__what_is_the_difference_between
    ... which is exactly where the FAQ item came from!

Maybe you are looking for