What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www beginning of

What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www to the beginning of the IP address.
I usually can eventually access the router, but it is way to much trouble. However, I use my iPad hundreds of times more often than my laptop.

Are you typing http:// in front of the IP address of the router? e.g. http://192.168.0.1
Sometimes, and with some routers it doesn't seem to like it if you miss off the http://

Similar Messages

What is the easiest way to sort photos within an album. I have photos from a trip but they are all mixed up. Photos from one part of the trip are showing up in other parts. Please help.

I have a MacBook Pro laptop and am trying to use iPhoto. I uploaded pictures but they uploaded out of order. Photos taken from different locations on my trip are all mixed up and I would like to sort them in chronological order. Things I have tried have been time consuming and often take several attempts before the moved photo "takes" to its new location within the album. If anyone can provide step by step instructions for this senior, it would be very much appreciated. Thank you.

following article tells how to sort photos in iphoto:
http://support.apple.com/kb/PH2397
also
http://support.apple.com/kb/PH2388
article on smart albums in iphoto as well:
http://support.apple.com/kb/PH2389
these should help answers your questions, also in every apple application if you look on the main menu bar they all have a help section that is very useful in getting basic how to instructions.

I want to use 1 itunes account but with 3 different iphones 2 for the kids and one for me, what is the easiest way to do that?

I want to use 1 itunes account but sync 3 different iphones, 2 for the kids and 1 for me. So I would like to have different programs, songs, apps etc for each phone. What is the easiest way to do that

Agreed heather. Also, if you have three users on the same account how do you keep phone calls and messages from going to all three phones?

TS1463 What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not w

What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not working, please help me...

If you are unable to get the iPod into Disk Mode to try and restore it, it's a very good indication, as mentioned in the article, that the iPod's hard drive is damaged and in need of replacement either by Apple or a third party repair company.
B-rock

I have a bunch of .pmd files that I have to have access to.. I am trying to convert to .pdf. what is the easiest way to do this with updated computers?

I have a bunch of .pmd files that I have to have access to.. I am trying to convert to .pdf. what is the easiest way to do this with updated computers?

Then you can’t do anything with those files. Even opening them in InDesign would yield very unpredictable results.
You’d need to find an old machine running nothing later than Windows XP and then buy a copy of PM which is like lighting money on fire.
That said, someone might come along willing to help out but just exactly how many is a bunch?

I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

. I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
What kind of media files are that?
For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
* https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

What is the easiest way to create alias email addresses in exchange 2013?

For example my official domain is [email protected]
Within my company i want to make it look like certain departments are sending from bicycles.com skateboards.com
and skooters.com and receive to those addresses even though the emails are really going through the
[email protected] domain. but it appears to be coming from three other domains.
appearance is everything. What is the easiest way to accomplish this.
Step by step with examples if possible. I am not well versed in exchange server 2013 yet.
Droid Hacker

In Exchange 2013 you can use the ECP to add additional email addresses to mailboxes. In order for a mailbox to send using an address, that address needs to be set as the reply address. One mailbox cannot send as multiple addresses. Doing that would require
a mailbox for each address. To set a new primary address on a mailbox log into the ECP and choose mailboxes under the recipients option on the left. Then search for the mailbox you want to add the address to and click the edit symbol. Navigate to the
Email Address tab on the left. To set a new primary address you will likely need uncheck the box for "Automatically update email addresses based on the email address policy applied to this recipient". Then click the plus button, enter the new address,
and check the box for "Make this the reply address"
Before you do this you should ensure that the proper MS records exist for these other domains, and that they are properly configured for mail flow. Once you set this as the reply address for a mailbox, that is the address external users will use for replies.

What is the easiest way to take out white background in elements 12?

what is the easiest way to take out white background in elements 12?

Try this:
Open the program and go to Expert tab
Double click the background layer to convert it to a regular layer
Get the magic wand tool out of the toolbox. On the tool's option bar, check "contiguous" or leave it unchecked depending on the presentation of the white background. Start with tolerance setting 32; you may have to adjust it down - - depends on picture
Left click on a white area and hit delete on keyboard
Press CTRL+D to get rid of the marching ants
If you encounter a problem, post a representative picture here for targeted guidance. You can do that via the camera icon in the reply box, but not in an e-mail reply.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

Following up on this thread,
I have a new iMac on the way and my current is from 2008, never had a problem but I am sure there are internal issues that I would prefer not to transfer.
I have no issues other then the slowness in certain programs and that is the main reason to buy a new one.
Programs like numbers and pages seem to take a longer time to open after I update to Yosemite.
I only use 272GB of 500 GB, my memory is 4GB and I am upgrading to 8Gb and bought the 4.0 processor.
Question:
Is there a way to manually transfer items or would that be a waste of time in that if there are issues they could be anywhere and would transfer anyway?

What is the easiest way to transfer a large imovie project from one computer to another in a different location.

What is the easiest way to transfer an faairly large HD imovie project from one computer to another in a different location. Can you export to drop box? Will the other computer need the exact imovie version?

OK it depends.
If you have a finished movie, you can SHARE/EXPORT MOVIE and create your final movie. Then, depending on the size of the finished movie, you can transfer via dropbox or similar service. Ninety minutes is a very long movie for iMovie, but it may work for you. I would suggest 720P to keep the size down.
If you need to transfer the entire iMovie Project so it can be edited in iMovie at the other end, then you need to transfer the project and event assets to an external hard drive and get the hard drive to the other location.
Directions are here. Follow the directions for 1) Moving or copying Project to external drive. Then 2) Consolidate Media.
https://discussions.apple.com/docs/DOC-4141

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or partitioning?

What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or is there some way to partition? I tried doing so but received a message that there wasn't enough free space to partition. Seems like a 1TB drive should have more storage than my Ipad

Its worth confirming what free space you have on your drive:
go to: Apple Menu > About this Mac > More Info > Storage
The bar chart shows how much free space there is on the drive:
Please realise that partitioning does not create extra space so this wont help you.
If your free space is less than 20 % you should get extra storage with an external USB or Firewire drive, any make or model will work.

What's the easiest way to move app data and data structures to a server?

Hi guys,
I've been developing my app locally with Apex 4.2 and Oracle 11g XE on Windows 7. It's getting close to the time to move the app to an Oracle Apex server. I imagine Export/Import is the way to move the app. But what about the app tables and data (those tables/data like "customer" and "account" created specifically for the app)? I've been using a data modeling tool, so I can run a DDL script to create the data structures on the server. What is the easiest way to move the app data to the server? Is there a way to move both structures and data in one process?
Thanks,
Kim

There's probably another way to get here, but, in SQL Developer, on the tree navigation, expand the objects down to your table, right click, then click EXPORT.. there you will see all the options. This is a tedious process and it sucks IMO, but yeah, it works. It sucks mostly because 1) it's one table at a time, 2) if your data model is robust and has constraints, and sequences and triggers, then you'll have to disable them all for the insert, and hope that you can re-enable constraints, etc without a glitch (good luck, unless you have only a handful of tables)
I prefer using the oracle command line EXP to export an entire schema, then on the target server I use IMP to import the schema. That way, it's near exact. This makes life messy if you develop more than one application in a single schema, and I've felt that pain -- however -- it's a whole lot easier to drop tables and other objects than it is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. just blow away what you don't want on the target after the fact..)
You could use oracle's datapump method too.
Alternatively, what can be done, IF you have access to both servers from your SQL developer instance (or if you can tnsping them both already from the command line, you can use SQL*PLUS), is run a script that will identify your apex apps' objects (usually by prefix to object names, like EBA_PROJ_%, etc) and do all the manual work for you. I've created a script that does exactly this so that I can move data from dev to prod servers over a dblink. It's tricky because of the order that must be executed to disable constraints and then re-enable them, and of course, trickier if you don't consistently prefix ALL of your "application objects"... (tables, views, triggers, sequences, functions, procs, indexes, etc)

What's the easiest way to select all my files from all the folders on a hard drive and place into one folder?

Hi there,
I have about 30,000 images all in hundreds of folders. I'm wondering what the easiest way to get them all into one folder so I can select and convert them all from .psd, .tiff, etc all to jpg. The reason I'm doing this is because the folder structure is such a mess, that I'm just going to import them all into aperture to sort everything. But the .tiffs and .psds are 100 mb each so I want to scale them to jpgs that are only 4 or 5 mb before I even think about importing them into aperture.
I tried doing a search for "kind is image" and it shows them all but a ton of them are renamed the same thing so when I try to select all and move into one folder it tells me I can skip that one or stop copying.
Any thoughts or ideas on this?
Thanks,
Caleb

Hi russelldav,
one note on your data handling:
When each of the 50 participants send the same 60 "words" you don't need 3000 global variables to store them!
You can reorganize those data into a cluster for each participant, and using an array of cluster to keep all the data in one "block".
You can initialize this array at the start of the program for the max number of participants, no need to (dynamically) add or delete elements from this array...
Edited:
When all "words" have the same representation (I16 ?) you can make a 2D array instead of an array of cluster...
Message Edited by GerdW on 10-26-2007 03:51 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

What is the easiest way to restore to a previous backup of Time Machine?

I was adding some simple album cover artwork to my iTunes collection when the computer locked up. I got the spinning beach ball and was unable to "force quit." So, I did a re-boot using the power key. I then launched iTunes and it opened properly with all the new Album Artwork. The files were not large in size and the "Album Artwork" folder is only 99.8MB.
I did a Time Machine backup yesterday and the only thing changed on the computer was the artwork. However, when Time Machine launched to do a backup it said there was 30GB(!!!) to back up?!?!?
I am assuming something got corrupted in the iTunes library file during the crash and now it thinks it has to back up part of the music.
So, that is what caused the problem. My question is, what is the easiest way to simply restore the backup the Time Machine had completed yesterday before all this happened?? It doesn't seem like there is a simple way to accomplish this. It looks like TM is used to back up specific files or folders and not to restore the computer to a previous state.
Any help is much appreciated.
Thanks in advance!!

Time Machine backs up all files except those you exclude in TM prefs. It doesn't "know" what kind a file is; it just compares info about a file on the source drive to see if it has already been backed up, or if it is new or has changed and needs to be backed up again. For unchanged files or folders, TM simply creates another hard link on the backup drive.
iTunes artwork files are separate files. The assignments of artwork to particular music files are saved in another file within the iTunes application (which is actually a package, a folder containing other files). So if all you did was add album artwork, TM would back up each new artwork file, and a new copy of the hidden file within the iTunes application containing the artwork-music links.
The following is speculation on my part, but it seems logical:
TM uses records in the hidden File System Events log to identify any new or modified files. However, it is possible to have an FSE entry as to a particular file without modifying the file (e.g. open, then close). So TM doesn't "know" until it actually compares the source file with the backup file (if one exists) whether a file is new or has been modified.
Hope this helps.

What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www beginning of

Similar Messages

Maybe you are looking for