What is the Exact and certain way for installing Windows's 8.1 on MacBook Pro retina mid 2014?

There are lots of different comments about installing windows 8.1 on Mbp 2014 via bootcamp when you surf the web.but I want the certain way for doing that without any doubts . If anyone has done this installation successfully please give me a step by step guid. Thanks

Please see Boot Camp 5.1: Frequently asked questions about installing Windows 8 - Apple Support and How to install Windows using Boot Camp - Apple Support.

Similar Messages

  • HT5192 What is the easiest and fastest way for me to get the iOS 5.1 update for my ipad2?

    What is the easiest and fastest way for me to get the iOS 5.1 update for my ipad2? I am non tech savvy and am a new user to apple devices.

    If you are already running iOS 5 on your iPad go to Setrings>General>aoftware Update and you can update over the air via WiFi. If you are not running iOS 5 you have to connect the iPad to your computer and update via iTunes.
    Instructions here.
    http://support.apple.com/kb/HT4623

  • What is the easiest and best way to install or open flash drive in Sarfari on my Macbook Pro...2010 model using mountain lion

    what is the easiest and best way to install or open flash drive in Sarfari on my 2010 macbook pro using mountain lion?

    There is no really good way to do what you want. Any tracks you purchase via your own iTunes Store account are for your personal use, tied to your iTunes Store account, and can't be given to anyone else. If you don't want to gift the tracks to her and can't access her iTunes Store account, the only option other than creating her a completely new iTunes Store account (which will require a new email address for her) is to buy the CDs those tracks are on.
    Regards.

  • How do I activate continuity calls on my macbook pro? I have an iPhone 6 and Macbook Pro Retina Mid 2014 and I live in Dubai

    I have an iPhone 6 and Macbook Pro Retina Mid 2014 and I live in Dubai, I bought my macbook from Canada and iPhone from UAE so it doesn't have FaceTime but i should be able to get calls on my mac right?

    If you set your imessage off on your phone it will only turn it off on your phone i think I don't think it effects your mac. I'm not 100% sure on this though.
    If you want to remove imessages from your mac  -  Open iMessage, go to Messages top left, and then select Preferences. Select "Accounts" and then simply "Sign out" That should do it.

  • Used Bootcamp to install Windows 7. Now, my macbook pro 13 mid 2009 will not boot back into OSX, there is no Bootcamp utilities like there should be anywhere to be found, and the DVD drive will not recognize the OSX install disk that came with my laptop.

    Basically all in the title. Also, some additional info: partition was 115 GBs for Windows, 385 or whatever for OSX (I have a 500 GB Harddrive), I have tried restarting multiple times, and the drive will recognize the DVD, but almost as if the DVD is blank, as it asks me to format it or drag files to it, etc.

    Hold your "Option" key down while starting your machine.  Continue to hold it down until you are presented with the boot menu which should allow you to select either OS X or Windows (provided you didn't somehow wipe your OS X partition).  When you get into OS X, you can go to System Preferences / Startup Disk.  Here you can select the default startup partition (OS X or Windows)... when you're installing Windows via BootCamp, it gets changed to Windows so when you finish setting up BootCamp, it automatically reboots and launches the Windows installer.  Installing all of the Windows drivers from the OS X DVD should provide you with a Startup Disk option under Windows as well.

  • What is the proper and best way to destroy a java.util.List or Array for GC

    Hi,
    If I have a java.util.List of objects lets say:
    List<File> files = new ArrayList();The List contains 1000 file objects. When my class finishes, is it enough to do
    files = null;to make GC able to release it from memory?
    Cause it seems like I can't do the following:
    for(int i = 0; i < extracted_files.size(); i++){
                extracted_files.get(i) = null;
    }Or should I use this one:
    files.clear()What is the proper and best way to do this in order to avoid memory leaks? How about normal Arrays like File[]?
    Edited by: TolvanTolvanTolvan on 2009-sep-10 16:58

    TolvanTolvanTolvan wrote:
    Thanks for the info!
    But what if the List is a class variable running in a Web Service for like months without terminating?You mean if the List variable is a member variable of a long-lived object? Then presumably the list needs to live as long as the object does. In the unlikely scenario that the object needs to live on but its list member variable does not, then yes, setting the member to null will be needed to make the list eligible for GC. But I highly doubt this is your situation, and if it is, you probably have a design flaw.
    And if the list is referenced only by a local variable, then, as I already said, when the method ends, the variable goes out of scope, and the List is eligible for GC.
    Now, a slightly different situation is when the List needs to live a long time, and at some point during its life, you're done using some object that it refers to. In that situation, simply remove the element from the list (or set the element to null if it's an array rather than a list), and then if it's not referenced anywhere else, it can be GCed.
    How about Arrays like File[]? Do I need to iterate through the array and null all the objects or is it enough to just null the Array?YOU. DON'T. NEED. TO. HELP. GC. You don't need to set the elements to null, and you most likely don't even need to set the array variable to null.
    Also note that only references can be null, not objects.

  • Hi, I want to rebuild my g/f's lost itunes as a surprise. What is the easiest and stealthiest way to buy tracks via my macbook for her itunes?

    Hi,
    I want to rebuild my g/f's lost itunes as a surprise. What is the easiest and stealthiest way to buy tracks via my macbook for her itunes? To be clear I don't want to buy her vouchers I want to buy the songs myself. I don't have access to her itunes account and to ask would give the game away. I don't want to own or listen to the songs myself but I struggle to think of an approach that doesn't involve some sort of piracy.
    She currently has zero tracks having lost them all so the only thing I can think of is starting an entirely new account in her name and filling it and then giving it to her on a hard drive. Is this the best way to go about it?
    Many thanks,
    Andrew

    There is no really good way to do what you want. Any tracks you purchase via your own iTunes Store account are for your personal use, tied to your iTunes Store account, and can't be given to anyone else. If you don't want to gift the tracks to her and can't access her iTunes Store account, the only option other than creating her a completely new iTunes Store account (which will require a new email address for her) is to buy the CDs those tracks are on.
    Regards.

  • HT4528 Hi my phone stopped charging I have to wiggle the wire a certain way for it to charge I think the inside is broken I tried multiple chargers

    Hi my phone stopped charging I have to wiggle the wire a certain way for it to charge I think the inside is broken I tried multiple chargers

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    Also:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • What is the best and easiest way to speed up a Mac-MINI?

    What is the best and easiest way to speed up a Mac Mini without adding memory?

    I'd tried to reply yesterday to your question but for some reason it didn't go anywhere and I got a red message box in the Discussion post area with "error." After trying three times, including  log-out, clear cookies from browser (and history) and back in, I still was unable to add my post with links to resources for your Mini, here. And the last time I tried that, the copied text also went missing as I found it gone after considering to make a Text document of it, for later posting.
    Anyway, the http://iFixit.com site has guides on how to replace RAM in the computer you have. Note there are different models shown and from what I remember, yours is the last 'old look' Mini with an optical drive. The model after that is thin, a 2010 model with slot in front for discs; the next one has no internal optical drive.
    RAM specs:  2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM (replace pair) up to 8GB total. Best price would be an online vendor of repute, once you know about what they sell for, you could ask a local mac expert if they could get you a better than retail price. I get ram from OEMPCworld and shipping is about $1. including insurance to my post office box, priority or 1st class. At about half retail. Crucial (website) offers parts, too; and so does OWC (other world computing).
    In addition, I recommended checking into the build specs and quality of the OWC (esales) site for external enclosures with their own power supply, for hard disk drive; for storage and bootable clones on different partitions. And see about Bombiche Carbon copy cloner, it is a commercial product now, not donationware. I've used it successfully to make competely bootable clones on a suitable external HDD (drive should have own power supply, too) A 750GB HDD in a self-powered enclosure that can boot Mac OS X from a clone, is a good start on backing up your upgraded OSX in a way you can clone it back into an empty, wiped or new HDD inside the computer; and it can run from the external. You can't necessarily use a TimeMachine that way.
    This should be your Mini -- check other indicators to be sure:
    http://www.ifixit.com/Device/Mac_Mini_Model_A1283
    A serial number lookup site such as the one I end up using because I had it bookmarked is OK: http://www.powerbookmedic.com/identify-mac-serial.php & also have mactracker http://mactracker.ca
    Anyway, before I time out or exceed post content(?) This is not all I meant to write before.
    Good luck & happy computing!

  • What is the best and safest way to convert songs from a dvd to an audio MP3?

    What is the best and safest way to convert a song/or songs from a dvd to an audio MP3? Are there any free safe converters?
    I have some live music from a concert (currently available on dvd only) that I want to convert to MP3 ... playable on my iphone.
    Thanks!

    Java float; IEEE 754 single precision has 32 bits: 1 sign bit, 8 bits of exponent, 23 bits for the mantissa.
    Java double; IEEE 754 double precision has 64 bits: 1 sign bit, 11 bits of exponent, 52 bits for the mantissa.
    When you widen a float value to a double this is what happens to the bits
       float:  s y   xxxxxxx mmmmmmmmmmmmmmmmmmmmmmm
       double: s y???xxxxxxx mmmmmmmmmmmmmmmmmmmmmmm00000000000000000000000000000try this
    class Widen {
        public static void main(String[] arg) {
            float f = (float)Math.PI;
            if (arg.length>0) {
                f = Float.parseFloat(arg[0]);
            double d = f;
            StringBuilder sf = new StringBuilder(toBinaryString(Float.floatToRawIntBits(f)));
            StringBuilder sd = new StringBuilder(toBinaryString(Double.doubleToRawLongBits(d)));
            sf.insert(1+8," ").insert(2,"   " ).insert(1," ");
            sd.insert(1+11," ")                .insert(1," ");
            System.out.println(sf.toString());
            System.out.println(sd.toString());
        static String toBinaryString(int i) {
            return toBinaryString((long)i).substring(32);
        static String toBinaryString(long l) {
            StringBuilder sb = new StringBuilder();
            for(int i=63;i>-1;--i) {
                sb.append(((l>>i)&1)==0?'0':'1');
            return sb.toString();
    }Please point out where you think there is loss of precision.

  • What is the easiest and best way to upgrade Mac OS X 10.5.8 to Lion?

    What is the easiest and best way to upgrade Mac OS X 10.5.8 to Lion?

    Make sure your Mac meets Lion's requirements >  Apple - OS X Lion - Technical specifications
    Since you are running v10.5.8, you need to upgrade to Snow Leopard which installs the Mac App Store which you need in order to download and install Lion.
    Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
    If you don't have a high speed internet connection, you may want to purchase Lion on Lion USB Thumb Drive - Apple Store (U.S.)
    If you run PowerPC apps read here before installing Lion >  Lion upgrade questions and answers:  Apple Support Communities

  • Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro

    Hi Everyone,
    Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
    The bootcamp drivers have been downloaded from apple's website.  Filename:  BootCamp5.0.5033
    I have a iMac 27" late 2013 model.
    NOTE:  I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
    Appreciate any assistance.
    Regards,
    asdutoit

    There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
    Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

  • Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should ido

    Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should i do to make my MBP is with windows 7

    Thanks for all of your help!  Big time!
    Guys, I been in the business working on PC and MAC for years. So I am not green at this, I was looking for some kind of option to get past the boot loader..  Which is failing. 
    I know how to boot into these modes.. Done tons of research before posting and couldn't find anything.
    It will not go into  Internet Recovery, or any thing else.  I hear the sound .. then that is it.. I get nothing else..
    I have tried clearing the NVRAM which is Option + Command + P + R
    Still nothing..
    So I thought I would try here to see if maybe there was some trick out there someone might know of that would work.
    What else guys?  I am hitting th keys right..

  • My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

    My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • What are the benefits of Apple TV as compared to streaming video via a MacBook Pro?

    What are the benefits of Apple TV as compared to streaming video via a MacBook Pro?

    Sorry, I don't quite understand your question. Amongst other things that's exactly what the Apple TV does, is streaming video from a computer.

Maybe you are looking for

  • Problems with sockets and InputsStreams

    Hi, I ve this code: InputStream is = null; boolean ok=true; while(ok){ //sc is an object instance of socketConnection is = sc.openInputStream(); return this.parse(is); //is.close(); return ""; and this exception is produced: java.io.IOException: no m

  • Turn off warning messages on queries,Why?

    <h4>Hi, as we know, we always turn off warning messages on queries by RSRT, but I don't know why. Needs Help,Thanks all.</h4>

  • Oracle Database 10g - RAC install

    1) I am trying to install Oracle 10g RAC (for Solaris Operating System (SPARC)) using 'Enterprise/Standard Edition for Solaris Operating System (SPARC, 64-bit) - ship_rel10_sol64_db.cpio.gz' downloaded installation. There is no separate installation

  • BIP 11g: Data Model Editor question

    In BIP 11g, when you create a parent query q1 and link it to child query q2, is it possible to refer to column from q1 in the select list of q2? Oracle Reports allows this and I am trying to re-create this Oracle Report to a BIP report and this does

  • Shadow tables in owb 10.2.0.2.8

    Hi all, I have a problem with creating shadow tables in patch set 10.2.0.2.8. If I recalled correctly, I did manage to create them with no issues in another version of owb: 10.2.0.3. Can I just verify that this current patchset 10.2.0.2.8 does not su