What  is the existing ones

I have a problem with using custom login module
every thing is ok
the aplication loged in
but when i try to exeqtue a query to the database from the
emmanager it give me
Internal Exception: java.sql.SQLException:
User credentials doesn't match the existing ones
Error Code: 17079
so what is the existing ones

ok i get it
the the container cant read the Encrypted password
from the data-sources.xml ....
i fix the problem by rewrite the password by hand
and every thing is going well but why
this error Appear just when i use the coustom login module ?????

Similar Messages

  • I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work.  I am using Yosemite.  May I know what should be the command line so that I can shift to an open DNS?  Thanks

    I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work.  I am using Yosemite.  May I know what should be the command line so that I can shift to an open DNS?  Thanks

    >SystemPreferences>Network>DNS

  • HT4245 can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, not

    can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....

    Please Rephrase your query.

  • HT1175 Time Machine wants to start with a new, full backup instead of using the existing one

    Hi, my Time Machine wants to start a new, full backup, instead of continuing with the existing one on the time Capsule.
    Looking a the Troubleshooting guide, I've found the following piece of info, which is, as 99% of the times with the troubleshooting guides, totally useless to resolve my problem...
    Message: Time Machine starts a new, full backup instead of a smaller incremental backup
    There are three reasons why this may occur:
    You performed a full restore.
    Your Computer Name (in Sharing preferences) was changed--when this happens, Time Machine will perform a full backup on its next scheduled backup time.
    If you have had a hardware repair recently, contact the Apple Authorized Service Provider or Apple Retail Store that performed your repair. In the meantime, you can still browse and recover previous backups by right-clicking or Control-clicking the Time Machine Dock icon, and choosing "Browse Other Time Machine disks" from the contextual menu.
    It should be noted (hence the uselessness of the guide) that:
    -I haven't performed ANY full restore
    - I havent changed my computer name
    - My computer has not had ANY repair, much less a hardware repair. Neither recently, nor in the 9 months I've owned it.
    Which puts me back to square one, with the marginal improvement that now I have a way of browsing my old backups.
    In the event I decide to start all over again, will there be a way for me to "sew" the two backup files?
    Or will I always have to go the silly way around?
    Anybody has any idea?
    Thank you for your time (machine/capsule, your choice;-)

    Hi John,
    no, that doesn't have anything to do with my problem.
    Just look at the image below.
    Time Machine thinks that the disk I've always used to do my backups has none of them.
    If I open the disk with Finder, obviously they are where they should be.
    It is even possible to navigate them as per the instruction reported above, but even following Pondini's advice #s B5 and B6 (which are more applicable to my problem) didn't solve the problem.
    Actually, not being a coder, I'm always scared of doing more damage than good when I have a Terminal window open.
    My question is: how is it possible that Apple hasn't thought of some kind of user command to tell the idiotic Time Machine software that a hard disk backup is a hard disk backup, no matter what?
    Estremely frustrating and annoying: I'm wasting HOURS in trying to find a solution to a problem that should not have arisen in the first place...
    Have a nice weekend
    Antonio

  • I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones.

    Hi!
    I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones. All of them are "waiting"... for ever.Even, when trying to download a new app, a "dratf" icon appears on the ipad, not the app's own icon...
    I've tried to switch off and on the iPad, disconnect and reconnect the itunes id... and nothing works. Even deleting an app, to download it again, doesn't work. It even doesn't ask for my password!!! (Stays with the small square with a circle around, the one that gets "bolder" while downloading... but it doesn't get bolder now. Just stay...).
    Any suggestions? I wouldn't like to reset the iPad, since I've got data in some apps that I wouldn't like lo loose...
    By the way, I can not either delete some apps with thos "draft" icons... even when the alert that appears when trying to do that is shown and select "ok".
    Thank you in advance!
    Best Regards,
    Carlos.

    Hi,
    Thank you, Once_was_lost, but it doesn't work either. I tried it yesterday as an option (I think you're referring to the options of those apps in the settings app).
    The problems are still here... I've been able to update some apps using the PC itunes (connecting the app to it), but all the other apps are still "wating", and I have two new strange things:
    * I cannnot remove the apps that are downloading (at least those that are supposed to be downolading ) . But I could remove one from the PC... and now there is an "empty line" in the "to update apps list".
    * Stranger: though I cannot download new apps or music from the store, I can do in-app purchases!!! In that case, I'm asked for the password and the item downloads. How is it possible?????
    I can download with the same user in the PC, in the iPhone... but not in the iPad .
    I'm getting mad...

  • Patch installer not overwriting the existing one

    Patch installer not overwriting the existing one
    Hi, for one my LabVIEW application, I have created two installers
    Including all the required additional installers (Installer)
    With no additional installer (patch installer)
    So that, for further versions they can use only patch installer.
    When I try to installer both the installer of same version which created two icons in “Control Panel\Programs\Programs and Features” as shown below.
    When I am installing the second installer (patch), I expected that it will either overwrite the existing or it will not allow me to install. But both didn’t happen.
    Please share your thoughts on the above.
    Thanks in advance
    Phani
    Solved!
    Go to Solution.

    Thank you..
    I got another doubt on the same.
    "Upgrade Code" should be same
    1.)For both installers (normal and patch)?
    2.)For all the versions?
    which one is correct in the above two?

  • FM to create equipment task group counter by copying the existing one.

    Hi Experts,
    I need FM to create equipment task group counter by copying the existing one.
    Manully we do this through the Tcode : IA01 but i want to do this through the Prog... for that i wrote one bdc it is creating some problem.
    Please let me know any FM avaliable IN 4.0B
    its very urgent please help me..
    Regards,
    Kali Pramod

    try this      /ISDFPS/TASKLIST_CREATE

  • Their are two power cords what is the big one for what's its purpose

    Their are two power cords what is the big one for what's its purpose

    Toobadd247 wrote:
    Their are two power cords what is the big one for what's its purpose
    To add to what others have said, the three prong plug allows the charger to be grounded, the two prong plug that can plug into the three prong cord assembly does not. There are situations (such as this) in which Apple advises grounding the power adapter to solve problems.

  • What is the latest one???where can i buy???

    What is the latest one???where can i buy???

    Hello,
    Being very literal with your question, the macbook pro retina 13" is the latest macbook pro.
    You can find them below.
    in Store or Reseller:
    http://www.apple.com/retail/ or http://www.apple.com/buy/
    Purchase Online:
    http://www.apple.com/macbook-pro/

  • I have an iphone 5, and the battery is so bad! I was just wonder if anyone had used an external battery before? are they good? can they do damage to your phone? what's the best one to get? any help would be great thanks!

    I have an iphone 5, and the battery is so bad! I was just wonder if anyone had used an external battery before? are they good? can they do damage to your phone? what's the best one to get? any help would be great thanks!

    I'd just like to say that ahs70's post on Dec 1, 2013 at 1:17am on Pg. 9 worked for me as well: https://discussions.apple.com/thread/5338609?start=120&tstart=0
    If your iPhone's battery is acting up you need to determine if it's a software issue or a hardware/battery issue.  To do that, after syncing your iPhone, erase/hard reset all data and settings from your iPhone to what it was from the factory as new.  This can be found in Settings/General/Reset/Erase All Content and Settings.  Then test it out for a day or two.  If it's still acting up then it's likely a hardware issue and you will need to get your battery replaced.  If your warranty is done than check out this link to get a battery kit to replace your iPhone battery yourself:  http://www.ifixit.com/Store/iPhone/iPhone-5-Replacement-Battery/IF118-001#produc tDescription
    If your iPhone is now working properly after hard resetting it than it's most likely a software issue.  This battery issue only started after upgrading to the new iOs7, so it is obviously related to the update not properly installing itself.  What has worked for me and many others is to manually update to iOS 7.0.4 using the full downloaded version of the update which is about 1.32 Gigs.
    But first you need to find out what model of iPhone you have, click here to determine if it's GSM or CDMA: http://support.apple.com/kb/HT3939?viewlocale=en_US&locale=en_US
    Then go here and scroll down to download the iOS 7.0.4 complete update for your device:  http://www.downloadios7.org/download-ios-7-0-4-ipsw-file.html
    Then scroll up on the download page and follow the instructions of updating your iPhone manually following the instructions below:  "IPSW with iTunes"
    And your done.
    Problem solved.
    I only posted this because it was a very frustrating problem that no one really seemed to figure out a solution for.
    I hope this helps.
    Emile Beaulieu

  • A new row being created while Editing the existing one.

    Hi All,
    I have a custom page, where i need to edit the existing Data. I have initialized my EOVO in PR. There is also a Lov which is used to search the existing data. Then i edit the field and Save it. Everything works fine and the existing row is being updated. But there creates a new row also with only one field is being populated which is the attribute which i have set on my LOV.
    how can i stop this new row from being created.

    Hi,
    Close your previous thread's if answered. One of which is
    Explicitly setting the value in my MessageChoice & MessageTextInput
    Regards,
    Anand

  • Trouble in creating a new iCloud account from the existing one

    my dad gave me his iPad which he bought(iPad 2) it's troubling me with the iCloud account, the iPad has my dad's existing iCloud account and I want to delete it but I don't have the password so does my dad he doesn't have the password for the account.so my question is could you assist me on how to create a new iCloud account without having the password of the old one.it uses iOS 7.1.2.

    You won't be able to delete the existing account in order to set up a new one without the password for the old account.  If your father doesn't remember the password, he can reset it as explained here: iCloud: Change your iCloud password.

  • Adding an entity with a COA that is not compatible with the existing one

    Hi guys,
    I'm facing quite a challenge right now. I'm working in a client who sells car, so they have several stores that consolidate in one parent. The current application has more than 5000 accounts (BS and P&L).
    They also have a bank who was left out to the initial scope of the implementation. Now, it's going to be added.
    The thing is that the bank has a different chart of accounts (really different!), and I was recommended the following steps:
    1. Keep the current BS and P&L but rename them as CarRet_PL and CarRet_BS
    2. Add Parent accounts: "Group_PL" and "Group_BS"
    3. Create an additional structure: "Bank_PL" and "Bank_BS" with the chart of accounts of the bank.
    4. Make both PL and both BS consolidate to Group_PL and Group_BS.
    So, in the end, we'll have 2 BS and 2 P&L... I'm not quite sure if this is the right approach. For me, it'd be best to use the existing structure, and add some accounts if necessary.
    Could you please let me know your thoughts?
    Thank you.
    Lu

    Hi there,
    Sounds very complicated to me... I don't think you'll meet all the requirements by only creating one consolidated balance sheet & income statement by combining the two sub-BSs and sub-ISs. If the two balance sheets are a must, to me it would be good idea to sit down with the group accounting team and go through at which level they need to present/see the data and build the group hierarchy accordingly. Ie:
    Group BS
         Current Assets - Group
              Current Assets - Cars
                   CarAccount1
                   CarAccount2
              Current Assets - Bank
                   BankAccount1
                   BankAccount2
         Equity - Group
              Common and preferred stock - Group
                   Common and preferred stock - Cars
                   Common and preferred stock - Bank
                   Whatever Bank accounts come next
              Retained earnings - Group
                   RE - Cars
                   RE- Banks
    etc.
    It will surely not be easy like that either...
    Hope this helps!        

  • Will the MapViewer OC4J instance conflict with the existing one?

    Hello,
    I want to install the MapViewer Quick Start kit, connecting it to my already-installed Oracle Database 11g Standard Edition. I also have installed Application Express 3.2. This is on a Windows XP workstation, for development use.
    My question is, am I supposed to unzip the contents of the kit (or the contents of the mv10133_qs directory inside the zip archive) into the existing oc4j instance that installed with the database, i.e., ORACLE_HOME\oc4j? Or do I install the entire kit into a separate directory, for example ORACLE_HOME\oc4j_mapviewer? If the latter, will this mean that I will have two unique OC4J instances running? And will this produce a conflict? (I'm not sure what the Database-installed oc4j instance does, if anything. Perhaps run the Enterprise Manager Database Control?).
    Thanks for any response.
    -Dan

    You should install (i.e., unzip) the MapViewer quick start into a separate directory and start its OC4J from that directory. Do not unzip it into your DB's (or any other product's) OC4J directory, as that will most certainly mess up both OC4J instances.
    It's perfectly fine to run two OC4J instances on the same host. There should be no conflicts, except maybe network listener ports which you can easily fix from MapViewer's OC4J (as I assume you don't want to change the DB's OC4J settings). Just try it and let us know.
    LJ

  • My ical will not sync with iphone and ipad since I've been using icloud. It says URL is incorrect. But what is the correct one and where do I input that to enable all calenders to sync on all devices?

    What is the correct URL for my ical on my MacBook so that all devices will have the same information? And how/where do I update that?
    Thank you.

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

Maybe you are looking for