What is the fastest way to bulk load data from AS/400 to Oracle?

I have been asked to move data from AS/400 to Oracle11gR2 as fast as ODI possibly can. Just straight mapping, no transformation, no joining.
An ODI11g agent is started on the target Oracle machine but, being new to ODI, I only know how to use SQL to Oracle LKM to load to staging and then Oracle Incremental Update IKM to move from staging to target table.
It took 50 minutes to move around 4 million records. I need to get this down to around 10 minutes. So guys, if there is a best practice to do this, please let me know, but right now I'll try any suggestion that you could think of.
Thank you in advance.

Create a new FILE dataserver - the put the IP address in the 'Host', complete the user and password fields. Create a new 'physical schema' - badly named I know as there is no such thing. The Physical schema 'Data Schema' would point to the directory that you require. /usr/etc/data/ for example. set your work as well.
create a logical, link the two together via the context etc etc
Basically the same as a db topology object. You can also refer this in the API OdiRef.getSchemaName() as you can with any other db logical.
Cheers
Bos

Similar Messages

What is the best way to transfer my date from my old iMac to my new iMac?

what is the best way to transfer my date from my old iMac to my new iMac? I don't have a time capsule, so I cannot use time machine.
thanks

Your best bet by far is to use Setup Assistant when the new Mac first starts up to transfer directly from the old one.
It's similar to Migration Assistant, but doing it that way will avoid having an extra user account.
Either way, you can connect them via FireWire, Thunderbolt, or your network, but avoid wireless if at all possible. You can connect both to your netwrork via Ethernet, or put a single cable between the two.
See Using Setup Assistant on Mountain Lion or Lion for details.

What is the 'quickest' way to read char data from a txt file

Hello,
What is the 'quickest' way to read character data from a txt file stored on the phone to be displayed into the screen?
Regards

To be even a bit more constructive...
Since J2me does not have a BufferedInputStream, it will help to implement it yourself. It's much faster since you read large blocks at ones in stread of seperate chars.
something line this lets you read lines very fast:
while ( bytesread < filesize ) {
         length = configfile.read( buff, 0, buff.length );
         // append buffer to temp String
         if ( length < buff.length ) {
            byte[] buf = new byte[length];
            System.arraycopy( buff, 0, buf, 0, length );
            tmp.append( new String( buf ) );
         } else {
            tmp.append( new String( buff ) );
         // look in tmp string for \r\n
         idx1 = tmp.toString().indexOf( "\r\n" );
         while ( idx1 >= 0 ) {
            //if found, split into line and rest of tmp
            line = tmp.toString().substring( 0, idx1 );
         /// ... do with it whatever you want ... ////
            tmp = new StringBuffer( tmp.toString().substring( idx1 + 2 ) );
            idx1 = tmp.toString().indexOf( "\r\n" );
         bytesread += length;
      }

What is the recommended way to obtain tracking data from carriers post XSI

We currently run an old version of SAP Business Connector. We are in the process of migrating all interfaces off BC onto PI. The one remaining interface we have problems is the XSI (Express Delivery Interface) interface we have with ECC06 and UPS via the BC server. The interface works but is not stable and we would like to decommission it if we are able.
I'm not 100% clear but it appears that XSI is no longer the recommended solution for obtaining tracking data from carriers. What is the recommend method today? We'd be happy to use a PI or ABAP solution but would prefer a standard solution that was supported by SAP and UPS.

Using Time Machine is the simplest way to back up.
debasencio wrote:
They don't fit on a standard data DVD and when I try to back it up to my 500GB external hard drive it says its not formatted to files that size.
How is the drive formatted?
If it's DOS/FAT32, you can only size file sizes up to 4GB.
If you are using it on a Mac only, format it Mac OS X HFS+.

What is the best way to remove personal data from the hard drive in preparation for selling my old Mac?

I am going to sell or perhaps donate my old Power Mac G5. Is there an easier, yet comprehensive way to remove my data from the hard-drive? My best approach is dumping anything I do not want found into the trash.
I am running Mac OS 10.5.8 on the powermac G5

For better security than the simple Erase (which does not actually over-write the data blocks, only clears the directory), choose Security Options, and Zero all data, one pass.
After a Zero all data, the only way to recover the data is to dis-assemble the drive in a clean room and use expensive test gear to recover a little of the data. That is good for all but Military Secrets.
If you really trust no one under any circumstances, remove the drive and beat it to death with a hammer.

What is the FASTEST way to present an image from disk?

I am currently using the standard read *jpeg file to display an image from disk to a picture control. My question is what is the most efficient method of getting an image ot the front panel, whether it is with this control, IMAQ, etc. At the end of the day, timing is crucial, and I would like to sync a trigger with the onset of an image.
Thanks in advance.

> I am currently using the standard read *jpeg file to display an image
> from disk to a picture control. My question is what is the most
> efficient method of getting an image ot the front panel, whether it is
> with this control, IMAQ, etc. At the end of the day, timing is
> crucial, and I would like to sync a trigger with the onset of an
> image.
>
FASTEST will be imaq, and both the intensity graph and the picture
control will be a bit slower since they are both better suited to other
tasks.
First, if you only have a small number of jpegs, you might preload them.
You could even go so far as to draw them to a hidden picture control
and simply show it when your event occurs.
The differences here are roughly that IMAQ will already have the image
data
placed into their image and will simply need to draw it, similar to
showing a LV control. The picture control data is a flattened version
of the image that needs to be interpreted somewhat and placed into a
system image, then drawn. The intensity graph assumes that is is false
coloring an intensity map and is zooming or stretching the data as well.
Therefore it also constructs a bitmap from the data and takes a bit
longer to do it as it decimates and stretches the data as necessary.
Greg McKaskle

What is the fastest way to remove blacklisted IP from Exchange Online Protection Services?

Hello,
We have recently added new ISP and unfortunately, if we try to send an email to any customer who is using Microsoft Online Protection Services the email is bouncing back indicating that our new IP is blacklisted by Microsoft. In order to remove, we have
to send an email to
[email protected]
Is there any telephone number I can reach their support?
Thanks,

I have probably bad news, this e-mail is only valid option to delist currently without direct support contract with Microsoft (when using Office 365 or so).
Sent e-mail to this contact and also check mxtoolbox.com if your ISP is also not blocked somewhere else and why.

What's the best way to read/write data from a file (preferably a *.txt file)?

As in the title. l have revived a couple of old VIs to read and write three numbers and a 1D array of clusters to/from a *.txt file. The functionality is not very user friendly, and it would also be useful if one could open the text files (manually - not through LabVIEW) and still be able to see/understand what was there.
I was wondering if anyone would be able to come up with a more efficient and/or user friendly method (compatible with lv6.1)
James
Never say "Oops." Always say "Ah, interesting!"
Attachments:
Read Spec.vi ‏110 KB
Write Spec.vi ‏58 KB

My primary goal is to have something that works and is easy and comprehensive to operate. Generating a human-readable file is just a bonus but would be nice if it could be achieved.
I enclose pictures of the initial file dialog (for both loading and saving the data - referred to as Spec(s) from hence forth), and of the front panel screen seen when a) loading a spec and b) saving a spec. In the file dialog, you have to already know the exact string to input else you'll just be told the file doesn't exist (applies for both loading and saving). When saving a spec, you cannot see any files previously saved, nor even any previous specs saved within the file. This means that one can unwittingly overwrite specs without realising it.
I'm not sure if I've explained this very well, but the current functionality means that far too much can go wrong. Additionally, if you forget the file name, you'll have no way of knowing what it should be (the data files are stored on a 'locked' part of our network accessible only by Admin or through the LabVIEW executable
Never say "Oops." Always say "Ah, interesting!"
Attachments:
File Dialog.JPG ‏23 KB
Select The Required Test Spec.JPG ‏10 KB
Name of specification.JPG ‏6 KB

What is the fastest way of getting data?

With a scanning electron microscope, I need to scan a 512*512 pixel area with a pixel repetition of 15000 (two channels), meaning averaging over 15000 measurements. Simultaneously I have to adjust the voltage output for every pixel.
I am using a 6111E Multifunction I/O board in a 800MHz P3. The whole task has do be done as fast as possible (not more than 20 minutes altogether).
What is the fastest way to get this huge amount of data with averaging and output in between? (E.g. do I use buffered read with hardware triggering or is there a faster way?)

Using the NI-DAQ API (not LabView) will give you a significant amount of more control over what happens and when to the data stream; which translates to a more efficient program. But you need to program in C/C++ or Delphi then. The Measurement Studio provides ActiveX controls that are like the LabView ones for C&C++ (they�re slow like the LabView ones though � not a lot you can do about the Windows GDI).
What are you trying to sample 15000 times? The 512*512 pixel field?
That�s almost 15Gigs of data! And it means you need to process data at 12.8MB/s to finish it in 20 minutes. I hope you know C, x86 assembly and MMX.
I would setup a huge circular buffer (NI-DAQ calls them �double buffers�), about 30 seconds worth or so, to use with SCAN_Start. Then I would proces
s the actual buffer the card is DMA�ing the data into with a high priority thread. Progressively sum the scan values from the 16bit buffer (the samples are only 12 bit, but the buffer should still be 16bits wide) into a secondary buffer of DWORDs the size of the screen (512*512), and you�ll need two of those, one for each channel. Once the 15000 scans are complete, convert each entry into a float divide by 15000.0f, and store it in a third buffer of floats.
If you wish to contract this out, send me an email at [email protected]

There are over 4000 duplicates in my iTunes. What is the fastest way to delete them?

There are over 4000 duplicates in my iTunes. What is the fastest way to delete them?

Hello there, yandere69keita.
The following Knowledge Base clarifies your concern about your My Photo Stream counting towards your iCloud storage:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
Does My Photo Stream use my iCloud storage?
No. Photos uploaded to My Photo Stream do not count against your iCloud storage.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Sq01 what is the fastest way,

hi all,
what is the fastest way to detect coding that update to eban from sq01?
as i am facing problem with more than 100,000 PRs updated mysteriously (customer tab data ) without any history changes .
i suspected it might be from query and i need to find the root cause of problem immediately
pls advice

Hi Ester,
Haven't got clearly what you written.
You mean to say, there is modifications done to query for updation?
if it is a standard code then I don't think it is used for modification.
Regards,
Atish

What's the fastest way to share files live between 2 Macs in the same room?

Please can I have some advice on this scenario?
I'll need to share HD video footage between 2 new Mac Pros in the same room. 1 Mac will be used to upload the footage and the other to edit it using FCP. The footage can be stored either on hard drives in the edit machine or on desktop hard drives connected to the edit machine (or if there is a better option I'm open to advice).
What is the fastest way of sharing the files and what is the simplest way?
Any suggestions would be greatly appreciated.
Thanks in advance

What is the fastest way of sharing the files and what is the simplest way?
Fastest way? a fiber channel SAN connecting the two machines to a common fiber-channel based storage array. Can't beat it for performance, but it comes at a cost (think $20K as a starting point, depending on the amount of storage you need).
Simplest way? Some external media (thumb drive, external hard drive, etc.) that you shuffle between the two machines
Intermediate: a NAS-based storage box on your network, although be aware that real-time editing of HD video can overwhelm many low-end NAS boxes.

What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?

What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?
I have a Firewire cable and Thunderbolt adapter, but no icons showing either Mac appear on either desktop.

The fastest way is to use Carbon Copy Cloner and a external drive formatted GUID OS X Ext. J in Disk Utlilty, then connecting to the new Mac and using Migration Assistant in the Utilites folder.
Even faster, if you can determine your going to replace all the apps from fresh sources anyway (like if the older Mac's OS X verison is old thus the apps) then just use a external drive and copy just your files to it, then connect to the new Mac and transfer over.
Some apps you can just grab the registration code and install it fresh on the new machine with the old code, talk to the developer about transfering the program, as long as it's deleted on the older Mac in the process.
It used to be Firewire Target disk mode was fastest, but since Thunderbolt came out...
Notice this support doc hasn't been updated since june 2012, no Thunderbolt info
https://support.apple.com/kb/HT1661

What's the fastest way to kill the battery...

hello friends. i was wondering what's the fastest way to drain my macbook pro battery so i can calibrate it? i want to kill the battery not the laptop if you know what i mean. thanks.

Turn on wifi + bluetooth and turn the brightness all the way up, and if its a new mbp, turn off the automatic video card switching in energy saver. Then just play youtube videos / movies / games (anything that uses the vid card as much as possible helps) till it goes flat.
Message was edited by: TiMatApple

What's the fastest way to change IP addresses in a Project?

Hi folks,
I'm using a cFP2100 controller with LabVIEW 8.2.1. I made a project using a configuration I created in MAX. Now I've moved the whole bank of modules to a new location, and the controller now has a new IP address via DHCP. My question is, what's the fastest way to update the IP address for my project? Do I have to make a brand new project with a new .iak file that has the new IP address? I'm thinking there's got to be an easier way.
Thanks!
Eric

Hi Eric,
Since you are getting your IP address from a DHCP server, the IP address of your Fieldpoint device is ultimately dependant on the server. If your IP address changes, you have two choices. You can right click your target and go to properties. In the properties under the general category, you can change the IP address of the target. The second option is to import a new IAK file into your project by right clicking the Project Name and going to import>>iak file.
I hope this helps,
Regards,
Nadim
Applications Engineering
National Instruments

What is the fastest way to bulk load data from AS/400 to Oracle?

Similar Messages

Maybe you are looking for