What is the font used in the buttons in Titanium skin?

Hello,
I need to know what the font used for the buttons (Contents,
Index, etc) in the WebHelp Titanium (RoboHelp 6) skin. I need to
know because I want to use this skin, and also include a Print
button.
Thanks!
Jennifer Bennett

Hi Jennifer. If you download the skin and open it in the skin
editor you'll see the font used next to the "Font" button near the
bottom r/h/ corner. You can also use the button to change the font
if you wish.

Similar Messages

  • G4 power mac PCI, cuda / pmu button (s),  what is the button next to the cuda / pmu button for ??

    In this photo from Apple on resetting the "cuda" or "pmu", there is the proper button circled for the reset. My question maybe silly, but WHAT is the button just to the right of it for ??   .....  It must be important enough to HAVE a BUTTON ??  ..... shown in this photo.
    OK, here it is, just outside the red circle, to the right.  It must be Important enough to HAVE a BUTTON, yet I have not seen , or heard of it being mentioned anywhere ???   .....   I have this very machine and I am expierencing some problems with it, and I find myself so tempted and wanting to push it !!, ... But not knowing what it's for has the wheels inside my head spinning (like mad).  ....  It and other things maybe driving me crazy (ier) !!
    ANYONE KNOW WHAT IT'S FOR ?????  .............  Thank You, and Have a Nice Day !!,  wayne146

    japamac, thanks for the fast reply,
    I have done the cuda reset with some success, still not working correctly though, machine only responds to power button on the front, not to the k/b button, (it did before) even used another k/b, both known to be good. Since this problem started, cuda reset has been done a few times, with some time intervals between them, battery tested, new battery, etc., etc.
    On my screen here, near the top, is a column titled, "more like this", in it is a "green checked" answer that reads; After resetting cuda / pmu, doesn't power up, 400mhz imac (<not my machine, I know) what next" answered by "Spudnuty", IN his reply's he mentions a list called "Symptoms / Cures Tables", related to pmu / cuda problems as I read it. Yet I have not found any such list by doing searches varying how I word it.
    Would You know of this list ?, or if it is still available ? ..... I had no luck looking for it, ..... wayne146 ....    

  • What are the ranges for correct skin tones using RGB%?

    What are the ranges for correct skin tones using RGB%?  Used to using a scale from 0 to 255.  But with LR it's RGB  , I know 100% RGB is white.  What do you use for %?

    While I whole heartedly agree that we should not be constrained to hard and fast numbers for accurate skin tones ... LR does offer an RGB color readout ... I am assuming they made those percentages available for the user to monitor the breakdown of specific color values for a reason ... so we could have an indication of how a specific color in an image will be reproduced ...
    I liken this to using a speedometer ... while many experienced drivers in well tuned vehicles can travel on the highway at the prescribed legal speed limit without really monitoring the readout on the dashboard ... however, there are times when they would like to verify the speed at which they are traveling ... the RGB color percentage readout in LR is no different ... just a source of information to verify you are achieving what you desire ...
    Again, going by specific numbers in this instance, I believe, could lead to problems ... there may be times when you may desire or actually need to adjust skin tones ... even though a pleasing WB has been achieved ... the relationship of R, G and B can be used to get you there.
    From what I have researched and put into practice with LR the following seems to be a good starting point and the data was borrowed from "the pixelation" blog:
    R: highest %
    G: middle %
    B: lowest %
    To get a little more specific. In general,
    R: Y + (15-20)
    G: average of R and B
    B: R – (15-20)
    For example, the following values represent common Caucasian skin tones using the rules above:
    * R: 80%; G: 70%; B: 60%. R is 20 points higher than B, and G is midway between R and B. That’s perfect.
    *  R: 86%, G: 78%; B: 70% also reflects a nicely balanced skin tone.  Again, G is midway between R and B, and R is 16 points higher than B. This, too, illustrates a great relationship among the colors.

  • What is the button just right of the power button on the Pavillion Laptop?

    what is the button just right of the power button on the Pavillion Laptop and what does it do?
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the maintenance and service guide for your notebook.
    http://h10032.www1.hp.com/ctg/Manual/c03043778.pdf
    Please see Chapter 2, pages 11-12 which show the buttons and label them. The button to the right of the power button is indicated to be a button to launch the web browser.
    Paul

  • What does the buttons do and why are they there?

    This is a stupid question, but what does the two buttons under the volume controle of the 865 PRO do?
    It’s called “Stop” and “Go To Previous Page”. Is it relatet to IE browser, -and if so… does anyone use it?

    Gomez411 wrote:
    items in my systems folder.
    There is a document named  com.apple.ReportMessages.domains and another named com.apple.ReportMessages.v2.domains. What are these and do I need them?
    Also, I see a lot of preferences that have lists that look like the following when I search the preferences files
    What I am curious about is why all the unknown documents and the ~orig?
    I am far from an expert but I have never seen this before and wonder if I should do something.
    Generally it is not a good idea to be poking around in the System Folder, trying to second guess files and plist. There are literally 1000's of files  in your System Folder you will have no idea why they are there.
    If you want to do house keeping stick to your username folder. Therefore any damage done is limited to your user account.
    My computer was not going to sleep.
    Did you try >SystemPreferences>EnergySaver.  Make configuration changes here.

  • T.code VKM1: what about the button REASSIGN?

    Hi All,
    could anyone tell me about the function of the button REASSIGN in t.code VKM1?
    Thanks

    You can get the details from OSS  Note 751042 - Usage of transactions VKM1, VKM2, VKM3 and VKM4
    Regards,

  • What settings do I use to back button focus set up for the d5 mark 3? TIA

    5D Mark 3
    Solved!
    Go to Solution.

    When you activate the menu, scroll over (using the dial on the front of the camera) to the orange "C.Fn2: Disp./Operation" menu. (that's the icon of a camera that has a index marks for a light meter below it -- right of the wrench icon, left of the star icon.)
    Each of those menu's on the 5D III have multiple pages.  It's the 2nd page (the 2nd dot from the left) that has the category for "Custom Controls".  Highlight that (using the dial on the back this time) and click the 'set' button.
    That brings up a menu showing each of the major controls on the back of the camera and what they do.  Highlight the icon for the shutter button (this only changes the behavior of a half-press) and change it from "Metering and AF start" to just "Metering start".
    The "AF-ON" button (on the back of your camera) is likely already set to "Metering and AF start" (I believe that's the factory default.)  
    So you're not so much enable back-button focus (which is already probably active)... you're more "disabling" the focus when  the shutter button is pressed half-way.
    Good luck
    Tim Campbell
    5D II, 5D III, 60Da

  • HT201263 What if the button on top of my ipod touch is broken. It's the sleep/wake button, and it doesn't really work anymore. HELP ME! I NEED MY MUSIC!

    Ok so my ipod touch just turned off by itself..again. I got it to work again last time cause the sleep/wake button still worked...Now it doesn't. What do I do?! I don't have money to get it repaired cause we all know Apple ain't cheap to fix! Any Suggestions will help!

    Try:
    - iOS: Not responding or does not turn on
    Where it says use recovery mode use this program
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
      - If still not successful that usually indicates a hardware problem

  • What is the button to change the variant in alv?

    Hi guys,
              can u tell me  is there any button to change the variant in alv?. what is tanscation varient in report , hw it will used.

    Hi
    The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
    standardized format. The list data is displayed as a table on the screen.
    The ALV Grid Control offers a range of interactive standard list functions that users need
    frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
    export list (in different formats), and so on. These functions are implemented in the
    proxy object class. You as the programmer have the possibility to turn off functions not
    needed. In most cases the implementations of the standard functions provided by the
    control are sufficient. However, if required, you can adjust these implementations to
    meet application-specific needs.
    You can add self-defined functions to the toolbar, if necessary.
    The ALV Grid Control allows users to adjust the layout of lists to meet their individual
    requirements (for example, they can swap columns, hide columns, set filters for the
    data to be displayed, calculate totals, and so on). The settings (list customizing) made
    by a specific user are called a display variant. Display variants can be saved on a userspecific
    or on a global basis. If such display variants exist for a list, they can be offered
    to the user for selection. If a display variant is set as the default variant, the associated
    list is always displayed based on the settings of this variant.
    <b>2. REUSE_ALV_LIST_DISPLAY
    REUSE_ALV_GRID_DISPLAY
    REUSE_ALV_FIELDCATALOG_MERGE
    REUSE_ALV_COMMENTARY_WRITE</b>
    3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
    6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
    7.fieldcat-fieldname
    fieldcat-ref_fieldname
    fieldcat-tabname
    fieldcat-seltext_m
    5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
    Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
    In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
    The report output can contain up to 90 columns in the display with the wide array of display options.
    The commonly used ALV functions used for this purpose are;
    <b>1. REUSE_ALV_VARIANT_DEFAULT_GET
    2. REUSE_ALV_VARIANT_F4
    3. REUSE_ALV_VARIANT_EXISTENCE
    4. REUSE_ALV_EVENTS_GET
    5. REUSE_ALV_COMMENTARY_WRITE
    6. REUSE_ALV_FIELDCATALOG_MERGE
    7. REUSE_ALV_LIST_DISPLAY
    8. REUSE_ALV_GRID_DISPLAY
    9. REUSE_ALV_POPUP_TO_SELECT</b>
    Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
    But either no.7 or No.8 is there in the Program.
    How you call this function in your report?
    After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
    Then use follwing function module.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = 'Prog.name'
    I_STRUCTURE_NAME = 'I_ITAB'
    I_DEFAULT = 'X'
    I_SAVE = 'A'
    TABLES
    T_OUTTAB = I_ITAB.
    IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
    ENDIF.
    ENDFORM. " GET_FINAL_DATA
    The object F_IT_ALV has a field, the activity ACTVT, which can
    contain four permitted values: 01, 02, 03 and 70. Each of the
    activities 01, 02 and 70 controls the availability of particular
    functions (in the menu and the toolbar) of the ALV line item list:
    a) 01: "Settings -> Display variant -> Save..."
    b) 02: "Settings -> Display variant -> Current..." and
    "Settings -> Display variant -> Current header rows "
    c) 70: "Settings -> Display variant -> Administration..."
    Activity 03 corresponds to the minimum authorization, which is the
    most restricted one: The user can only select layouts which have
    been configured already. In particular, all of the other functions
    named above are inactive with activity 03.
    Now if you want to permit a user to change the column selection and
    the headers as well as to save the layout thus created, for example,
    but if you do not want to permit the user to administrate the
    layouts, you grant him or her the authorization for activities 01
    and 02.
    Check this link it will be mosty usefull for u
    http://www.sap-img.com/fu017.htm
    Reward all helpfull answers
    Regards
    Pavan

  • What is the button on the Wrt110 router for?

    Hello, I have the wrt110 router. I see there is a button on the top, where the led lights are. What is that used for?

    That button is an Wi-Fi protected button. If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup to automatically configure wireless security for your wireless networks. If you wish to know more information about it then you can refer to the link mentioned by GV.

  • What is the button on the right in the layers palette?

    Can someone tell me what the small round black dot/ button is in the layers palette? (next to Hayes Mansion Hotel) Nothing is selected in my file and I cannot figure out what this is indicating!!  Thank you! Jennie

    To further what Steve said; just select the object and then look in the Appearance panel to see what Effect has been applied to the object.

  • We reading an email in the Apple mail app., what is the button at the bottom and in the middle for?  Where is the button to delete an email?

    How do I delete an email that I am reading while using the Apple email app?  The is a icon at the bottom in the middle of the email, but I don't think it is a delete button.

    Tap the trash can icon.
    iPhone User Guide (For iOS 6 Software)
    Page 53.
    Regards.

  • What's the button for on the right side of the ipad2 over the volume button?

    I have found a button over the volume button on the upper right hand side of the ipad2.  Where I push up on down a bell appears.  What is this for?   How does it work.  Thank you for your patience.

    Users guide:
    http://manuals.info.apple.com/en_US/iPad_User_Guide.pdf
    Links to many Apple articles about iPad:
    http://www.apple.com/support/ipad/

  • What is the button for the action that looks sort of like a fancy letter T?

    If I want to close all windows or do many other different actions, there is a button I need to press that looks like a fancy T. It sort of has a \ but with another small line on top. What is that button on the keyboard?

    Option. It may also be Alt.
    (61236)

  • New Officejet 6000 has no manual and what do the buttons do?

    I have look all over this site for a users manual and cannot find one.
    My new officejet 6000 has four buttons on the front.  One for power on.  the next three do what?
    Also the power button blinks all the time, what does this mean? Is it normal?
    This question was solved.
    View Solution.

    rfhar wrote:
    I have look all over this site for a users manual and cannot find one.
    My new officejet 6000 has four buttons on the front.  One for power on.  the next three do what?
    Also the power button blinks all the time, what does this mean? Is it normal?
    The user guide is available for download here.  Page 128 (124)should answer your questions.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for