What is the impact - Activating Change Logs for Material Classification Dta

To activate Change Logs for Material Classification Data I must first set the flag for "Multiple Objs Allowed" for the Class Type 001 Material Class. I am curious of what the impact of setting this flag will be. Also, is there a way to measure the DASD impact of activating the Change logging for this data.
Thankyou
Kevin

In addition to the performance impact the process of turning on Change Logs for Classification data will convert the tables KSSK and AUSP to use an internal SAP number as a key instead of the Material number. This will cause problems for any custom programs that access those files directly and expect the material number to be the key. This file conversion occurs during the execution of program RCCLUKA2 which is used to Flag the change logs for existing records. This can be reversed by running report RMCLINOB. Because of the above impact we decided here to NOT implement this change in production.

Similar Messages

What is the impact by changing gl account contra account: acquisition value

Hi experts
what is the impact by changing gl account (contra account: acquisition value in asset accounting(AO90) to the different company codes and different countries. Please review and send across step by step points to us
Warm regards
Sreenivas

hi,
thnaks for reply, but we cannot reverse as it is initially uploaded directly in asset reconciliation account, moreover, we are already in production and we are yet to run the depriciation from april, finanlly we decided to post the difference amount in reconciliation accounts with OASV, but till now opening upload account shows zero balance, once we post the difference amounts directly in reconciliation accounts this initial upload gl account shows the carryforward balance from march. is there any other alternative,

What are the impacts of changing material group of a Material ?

Hi,
Could some one tell me in detail about the impacts of changing material group of a material that is active in procrement?
Thanks,
Veera

Hi,
If you are changing it from one valid group to another valid group and both will still be there afterwards, then the impact is small, but important.
The data in the Info systems and BW etc. will have been updated with the the "old" material group and so if you tried to compare them you would find differences.
It is something that does happen from time to time and as long as the two groups will still be ther afterwards there should be no reason why this would cause any technical or system problems. The effect is purely on the historic data.
I have seen this done several times in many implementations and so far it has not caused any major problems apart from some reports "appearing" wrong if you compare them against other reports that involve historical movements.
Steve B

Change log for material number range

Hi All,
can you guys please tell me how to find the change log for changes done in material type number ranges that is the thru tcode MMNR although its a customization change but as its for number ranges so there is no transport request involved so it is not possilble to see the import of transport request

in transaction MMNR
from menu GOTO > change log
or in transaction SNUM
from menu GOTO > change log

Change Documents for Material Classification data Changes

Dear Friends,
We have configured custom classification objects for material master and also we are able to maintain the material characteristics using MM01, MM02 and also using ALE interface. But I am not able to find the Change Documents in any of the table CDHDR & CDPOS. Please let me know what needs to be done to capture the change documents for a material classification changes in this case.
Many thanks for you inadvance.
Beast regards,
Mallikarjun.

Change logging of all Classification (including Material Classification) is controlled in the Class type configuration.
SPRO -> Cross Application Components -> Classification System -> Classes -> Maintain Object types and Class types -> Select Object Table = MARA -> Double Click Class Types under MARA -> Select Class Type 001 and Display -> Check whether "Change Docs" check box is checked on.
Also check that another flag "Chg. docs for Class" is set on all Objects under the Class type too (by double clicking the Objects folder for a Class type).
If the Change docs flag is checked on for the relevant Class type and Object then change docs are logged in CDHDR and CDPOS tables for object "CLASSIFY"
Also the "Change docs" flag cannot be set unless the "Multiple objects allowed" flag is also set in the Class type configuration.
Please refer [SAP Note 65124 - Classification Change Documents|https://service.sap.com/sap/support/notes/65124]
Also the above note says and I quote: If "Multiple objects allowed" indicator is not set, start the RCCLUKA2 program. The classification data are converted and the indicator 'Multiple object types allowed' is set. Now you can set the indicator 'Change documents' in Customizing of the class type. However, it only says that change documents are generally possible for this class type. Therefore you have to select objects under 'OBJECTS' for which the change documents are to be written.
So if the Class type doesn't have "Multiple objects allowed" set (along with Change docs flag not set), there is also a conversion that needs to be run using program RCCLUKA2.
Also when you transport the configuration to a target system, the program RCCLUKA2 should be run again, refer [Note 379180 - Classification data disappeared|https://service.sap.com/sap/support/notes/379180 ]

Activation of History Log for Material Classification CLASS TYPE 001

Hi All.
I've a question about this object.
We need to launch RCCLUKA2 to activate multiple objects registration and to generate history log for changes in classification of materials (AUSP table).
Reference are sap notes 942691 and 943559.
I FOUND OUT THERE'S a big problem. RCCLUKA2 change AUSP objek key, using internal number range from INOB objects.
There're hundreds of custom reports and other stuff that read AUSP directly with Matnr Code as objek key.
I think that's a serious problem, isn't it? Or is there any solution about ?
Thanks for Help!
_______> old message
This report RCCLUKA2 does 5 steps.
1 step: activation flag for multiple objects in table TCLA and TCLAO only for input class type (in this case 001 -> MATERIAL);
2 step: download of KSSK data and AUSP data in two text files (name defined in input parameters);
3 step: delete all KSSK data and AUSP data for class type 001, 10.000 records every loop;
4 step: create reference object in table INOB for all records inserted in KSSKFILE, inserting all records in KSSK table at END of INOB upgrade;
5 step: inserting record in AUSP table from all records inserted in AUSPFILE, using INOB objectid created in step 4.
DEQUEUE ALL
We think that this process is a little bit dangerous in production system, due to procedures that always run, in background or foreground.
I've found a work around that creates an implicit enhancement for LCLVFF10 form FILL_REDUN.
I think that it's not suggested to create this enhancement because of the missing flags in TCLA/TCLAO and missing reference in INOB and KSSK database.
This enhancement would create records only in CDHDR and CDPOS with a general key object reference (such concatanate matnr(without-letters) mafid and atinn code).
This enhancement couldn't also activate the standard function of reading document changes from standard menu in MM03/MM02/MM01, etc..
Do you have any suggestion about this?
RCCLUKA2 is a very old report. SAP didn't give any advice or upgrades for this need?
Thanks for your help
Message was edited by: Roberto Vacca

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

Change logs for material master are cut

Hi,
I am having a problem with material master logs. I am not able to get the complete logs for the changes made on a partcular material. It is displaying the change log from today to 2006 but i want to check till 2001. As of now it is cutting it till 2006.
Where as in the quality system i am able to see the complete log but not in our production system.
The way to view material master changes is display any material and go to Enivornment menu and select display changes.
Regards,
Chitrasen

It is possible to archive change documents independent of the objects they belong to.
Usually you would archive a material master and at the same time all change logs get archived too with object MM_MATNR
But as already said. It is possible to archive change logs independtly with object CHANGEDOCU
so execute SARA, enter CHANGEDOCU and click the administration button. If you see archives that were recently created, then you can be sure that your logs got archved.

Want to know that wat is the impact of changing a field label in master

Dear Experts,
Want to know that what is the impact of changing a field label in masters ?

hai sap gurus,
kindly clear my doubt..
Swetha

Change Log for a Ztable

Hello,
I have a requirement to get the change log of a Ztable and i have check the LOG Table change in Technical setting and also maintained respective entries in RZ11 with help of Basis.
But still i am not able to see the changes thorugh SCu3 Tcode.
I have seen FM /BEV2/ED_READ_DBLOG but was not able to use the same to track DGTABLOG changes.
Kindly suggest and view.
Thanks
Ritesh

Go to AUT10, press F9.
Then enter the table name in field Table Name.
Then press execute.
Also check the blog Find Changes Logs for a table using SM30
**Edited by: Dëv Päträ

What is the different between JMS Client for sonicMQ 4.0 and sonicMQ 6.1?

hi everybody,
I'm currently in big crisis and hope somebody out there
can give me some guidance.
We have a JMS client developed by an ex-colleague. The jms client was
developed specifically for SonicMQ 4.0. Recently, we are upgrading to
SonicMQ 6.1 and thus, we re-compile his code. Before re-compiling his
code, we had put sonic_Client.jar and sonic_Crypto.jar in the library
directory. There was no error.
We were able to startup our receiver client without error. The receiver
subscribed to the SonicMQ server 6.1 successfully. We could see it in the
SonicMQ Management console. However, when we send a topic, the
receiver client does not consume. All of us had been working day and night
to find out the answer but no progress until now.
We have a couple of properties file and I think, jmsconnect.properties file is
the one been used. This is the content:
# Must enter value if JNDIURL below, is not specified
BROKER=mssonq:2506
JNDIURL=
MODETYPE=com.sun.jndi.ldap.LdapCtxFactory
TOPICCONNECTIONFACTORY=
QUEUECONNECTIONFACTORY=
The previous version that was developed by my ex-colleague is still running
fine in the current production server.
Please let me know if the jmsconnect.properties is correct or wrong. By the
way, what are the major code changes required for jms client that was
meant for SonicMQ 4.0 to get it upgraded for SonicMQ 6.1.
Any help will really appreciate.
thanks & regards,
Kenny

AT&T is a GSM carrier. Sprint and Verizon are CDMA. The CDMA iPhone 4 has no SIM slot. The CDMA iPhone 4S does but the phones still can't be used on GSM in the U.S. The software versions are the same across carriers at this time.

Configure the Change Log for the activity

Hi to all,
I would like to know if it is possible to configure the "change log" for the activity.
Thanks in advanced,
Matte

Carlos,
Can you be more specific on the term 'Configure'. Change log is automatically generated by SBO. The only thing you can change is the numbers of Historical instances of the log
Administration > System Initialization > General Settings.......Services Tab...History or Log Settings. Be default it is 99 instances.
Suda

Activate change logs for the table V_T007K

Hi,
Change log check box is activated in table and change logs is activated in system. But still I am not able to view any change logs recorded for the table V_T007K using SCU3 transaction.
I tried by changing some data and than checked the SCu3 transaction. nothing is recorded against the table.
Please let me know what needs to be done to capture the change logs for the changes done to the data in the table V_T007k table.
Thanks in Advance.
Thanks & Regards,
Madhuri.

Hi
The table u mentioned V_T007k is not a transparent table
.its a view only for views u cant track changes.
But only for transparent tables u can only track changes thru SCU3
Also u can find the changes in a table from SAP TABLE
CDHDR and CDPOS.
if helpful reward me points.
Regards
Manas Ranjan Panda

How to check and delete the change logs for DSO

Hello All,
I have build a process chain that will delete the change logs for DSO prior to 7 days but when i executed it, the number of entries are still the same within DSO.
Then i tried deleting directly from "Environment" menu from DSO maintainance but does not work. Can anyone please explain how to resolve this issue or the proper process of deleting the change logs. Appreciated.
Thanks,
M

Hi
Check out the below two articles
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1058b68f-96c4-2d10-fbb1-de8757ca6a58?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Regards,
Venkatesh

How to see the change logs for billing document

Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjan

hello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards.

What does the return code 20 stands for in the Transport request log

Hi,
When we have retreived the Transport request log by using the Unix command, we have got return code 20.
Please let us know what does the return code 20 stands for and under what scenerios I will get the return code 20.
Thanks & Regards,
Madhuri.

chk the last return code in this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e26c4eb711d182bf0000e829fbfe/content.htm

What is the impact - Activating Change Logs for Material Classification Dta

Similar Messages

Maybe you are looking for