What is the latest version of IPS which i can use which has latest signatures.

                   Hi Please suggest what is the latest signature and version for IPS as i am preparing for my CCIE Security Lab from Networkers zone( http://networkerszone.com/) and need to get IPS upgraded

For which Blueprint are you preparing? For 3.0 you should prepare with IPS 6.1, for Blueprint 4.0 you should prepare with IPS 7.0.
https://learningnetwork.cisco.com/docs/DOC-3241
https://learningnetwork.cisco.com/docs/DOC-15257
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Similar Messages

  • IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
    Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

  • What is the oldest version of iTunes that i can use with my ipod nano 7th gen

    I am planning on buying an older computer (uesd) because it is ceaper. i know that the newer the ipod, the newer the itunes version has to be. also the newer the itunes version is, the newer the computer has to be as older computers become too out of date for the new versions of itunes. i am also wanting to purchase a 7th gen nano. so pretty much i need to know how far back in the itunes timeline i can go, while still being compatible with my nano.

    10.7

  • What is the newest version of NI DAQ i can use with LABVIEW 5.0

    Can Labview 5.0 be used with NI DAQ 6.8.9.
    The Cards I am using are IMAQ PCI 1411, 6013 and PCI DIO 96. Should this combination work together ?

    The most recent version of hte NI IMAQ software is version 2.5.5. You may want to replace version 2.2 with that and see if it helps. This link will take you to the download page.
    J.R. Allen

  • What is the latest version of iMovie that I can use?

    What is the latest version of iMovie that I can use?
    Where could I buy it?

    iMovie 09, oddly numbered 8.0.6 (go figure)
    you get it through the iLife Suite
    http://store.apple.com/us/search?find=iLife&mco=Nzc1MjMwNg
    I suspect an iLife 10 should be forthcoming, but that is just a guess on my part.
    roger

  • What is the latest version of Quicktime that I can use with OSX 10.4.11  (Powerbook G4)

    I get warnings that my version of Quicktime is seriously outdated (7.6.4).  I know I can't download the latest version . . . is there any chance I could update at all?

    Hello,
    To get beyond 7.6.4 you need 10.5.x
    Dunno, might try Perian...
    http://perian.org/
    Perian enables QuickTime application support for additional media:
    File formats: AVI, DIVX, FLV, MKV, GVI, VP6, and VFW
    Video types: MS-MPEG4 v1 & v2, DivX, 3ivx, H.264, Sorenson H.263, FLV/Sorenson Spark, FSV1, VP6, H263i, VP3, HuffYUV, FFVHuff, MPEG1 & MPEG2 Video, Fraps, Snow, NuppelVideo, Techsmith Screen Capture, DosBox Capture
    Audio types: Windows Media Audio v1 & v2, Flash ADPCM, Xiph Vorbis (in Matroska), and MPEG Layer I & II Audio, True Audio, DTS Coherent Acoustics, Nellymoser ASAO
    AVI support for AAC, AC3 Audio, H.264, MPEG4, VBR MP3 and more
    Subtitle support for SSA/***, SRT, SAMI
    Firewire reset
    What brand/model enclosures are these?
    Shut down the computer.
    Disconnect all FireWire devices and all other cables, except the keyboard and mouse cable(s).
    Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
    Plug the computer back in and turn it on.
    Reconnect the FireWire device(s) (one at a time if there is more than one) and test. Test with each FireWire port if you have more than one.
    https://discussions.apple.com/thread/3101579?start=0&tstart=0
    http://hints.macworld.com/article.php?story=20051129074631518ß
    Other than that...
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
    There are workarounds if the 867MHz CPU is the only hangup, (not Bus Speed)…
    http://sourceforge.net/projects/leopardassist/
    http://lowendmac.com/osx/leopard/unsupported.html
    List of Applications Not Compatible with Leopard...
    http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard

  • I downloaded Firefox 6, but I cannot open it up because my computer is OSX, how to I reinstall the previous version of Firfox so I can use the internet? Help, hep?

    I downloaded Firefox 6 to my OSX desktop, but I am not able to use it open up this latest version of Firefox. Is it possible to upload the previous version of Firefox, if so, how do I do that so that I can get onto the internet? I would appreciate the help
    I have been able to update other versions of Firefox, but not Firefox 6

    The current version of Jing requires an Intel processor running OS X 10.5.8 or later. The message you're receiving is because the iBook uses the PowerPC platform and not Intel. The last release of Jing that will run on your system is version 2.3, which they no longer support and it doesn't auto update.

  • I downloaded Firefox 4.0.1 and have not been able to use my DigitalPersona fingerprint login since. Will this be added on or can you tell me how to go back to using the older version of Firefox so I can use my fingerprint login again? Thanks

    I have not been able to use my digitalPersona v4.11.3826 (fingerprint login) since I downloaded firefox 4.0.1. Will this be incorporated to the add-ons or if not, can you tell me what the easiest way is to go back to using the older version of Firefox?

    EgisTec, who now provide the HP Simplepass application, have made an update of the scanner software for Firefox 4, for details see https://support.mozilla.com/questions/814397

  • What are the different types of bind that we can use to configure COREid?

    Hi
    What are the different types of LDAP bind that we can use to configure COREid?
    Thanks for your input.

    (http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/idconfig.htm#BABGAECB)
    7.5.2 Creating an LDAP Directory Server Profile

  • What is the best resource for photoshop brushes I can use commercially?

    I have been down a hundred trails of photoshop brush websites where almost all of them don't allow commercial use of the brush, for art that will be "reproduced" into a product .
    Most sites claim you can use the brush for commerical use, but they don't allow "reproductions" where I might make money using the brush to make a greeting card.  Considering I'm an independent greeting card designer for large companies, that isn't possible.
    I'm willing to pay for brushes, I just need ONE place I can go to, where I can purchase brushes withou copyright or permission hassles.
    Many brush artists want "name credits" if I use their brush, but how that is possible when I use 20 different brushes on one design is beyond me.
    I'm really tired of searching endless websites, only to find out when I download the brush set, there is an attachement from someone that says I must give a name credit if I use the brush.  This is completly unrealistic.

    Under
    Creative SB brand - http://www.creative.com/products/welcome.asp?category=
    Audigy 2 Zs VE (USB)
    Audigy 2 NX (USB)
    Li've! 24-bit External (USB)
    Audigy 2 Zs Notebook (PCMCIA)
    <i>(Digital Music LX (USB))
    (Digital Music SX (USB))</i>
    Creative E-MU brand - http://www.emu.com/products/category.asp?category=60
    http://www.creative.com/products/welcome.asp?category=237
    0202 USB
    0404 USB
    66/66M (PCMCIA)
    other brands ... (too many to list)
    http://www.musiciansfriend.com/rec?g=rec&s=computer
    http://www.zzounds.com/cat--Audio-Interfaces--248
    E-MU 0404 USB and 66/66M PCMCIA are quite good ones (and cheap ones too) but, as best ones you're asking are devices like RME FF800 and some MOTU and DigiDesign models, etc..
    jutapaMessage Edited by jutapa on -2-20062:9 PM

  • In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

    In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

    If you mean the drop marker then you can still get the History of the Back and Forward buttons if any by either Left-Click and hold for a second or by Right-Clicking them.
    If you still want the drop mark there also then there is this Extension at https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
    Also the abbreviation for Firefox is '''Fx'''

  • HT4623 i have ios 4 version and when i try to update my iphone to the latest version it with itunes it can't reach the update server. what should i do?

    i have ios 4.3.3 version and when i try to update my iphone to the latest version it with itunes it can't reach the update server. what should i do?
    p.s.: i don't have any cinnection problem.....

    It could be the fact that your hosts file is directing itself to gs.apple.com Cydia not gs.apple.com Apple,
    Hope it helps
              http://support.apple.com/kb/TS3694
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • What is the latest Sun One webserver with SP #, which we can use it  in pro

    What is the latest Sun One webserver with SP #, which we can use it in production environment.
    thanks
    siva

    6.1 Service pack 5 is our latest release.
    you can get this software from
    http://www.sun.com/webserver
    hope this helps

  • What is the latest version of iMovie that I can run on a Power Mac G5

    What is the latest version of iMovie that I can run on a Power Mac G5 running OS 10.5.8?

    alexian1 wrote:
    Why wouldn't I like it?
    All I can tell you is that I found it incomprehensible and largely unuseable, and have stayed with iMovie 6 ever since.

  • What is the last version of the Apple OS that supports Eudora and Quake III? (I'm at 10.4.11)

    Hi There,
    I am having vertical line issues with my G4 PowerMac Quicksilver (April 2002)..  Red or purple lines and sometimes they connect to the pointer arrow.
    I thought it was the graphics card but when I ran the Apple Hardware Test Disk version   1.2.5 it failed at the Logic board, although it's an after market Logic board because one of my (2) 1 gig processors died a few years back so I don't know if the hardware test disk is still valid with an after market Logic board?
      Also What is the last version of the Apple OS that supports Eudora 6.2.4  and Quake III? (I'm at 10.4.11)
    Thanks for any and all help, I think my time is limited in my old Mac..
    Eric

    Hi-
    I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
    I have a tutorial here:
    C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
    16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
    Use Arctic cooling MX-4 compound.
    As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
    In Tiger, there is a retail driver update that you can try:
    http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
    No updates needed for Leopard.
    Eudora should be fine:
    http://lowendmac.com/misc/10mr/mb0910.html#1
    Quake is fine. This coincides with my observations:
    http://www.insidemacgames.com/forum/index.php?showtopic=31884

Maybe you are looking for

  • Photo saving problems after updating to iOS 6.1.2

    I just updated to the iOS 6.1.2, and now I can't save pictures from the web to my photo albums, anyone herd of this or have any suggestions?

  • HTTP POST binding not available in 11g???

    Hi, I am trying to call a HTTP service using HTTP POST, passing HTTP params to it. I created a small bpel process in 10.1.3.4, and used the HTTP POST samples, which worked out really well. However target platform is 11g. So I just tried to migrate th

  • Date serialization

    Hi I have found interesing (??) problem with Date object serialization. Date object serialized on Sun JVM can't be correctly deserialized on IBM JVM !! Try run this example on Sun JVM. import java.io.*; import java.util.Date; public class Write {    

  • Apple logo and nothing else...

    I picked up my iPhone 4 today and was preparing to pass on my 3G to my wife. I had recently upgraded to iOS4 on it so thought that the best option to clear all my stuff off was to select the option to clear my data rather than reset it. This was goin

  • How to assign values to columns in a tabular form

    hello, my tabular form allows insert on a table. some of the fiels in that table are not null and are hidden from the user. before submitting a new row the hidden columns needs to get their values from a database function. is there a way to do it in