What is the Max. Limit of ICM Script Nodes that can be set in ICM Script 8.0

I am trying to out the maximum number of Script Nodes that can be set in ICM Script editor , is there any limit on that ?
I am using ICM 8.5 Version
I have read that the value for maximum number nodes that can be executed is configurable as seen in hkey_local_machine\software\geotel\icr\\routerX\router\currentversion\configuration\script\MaxNodesExecuted
By editing the value help me to increase the No. of Script nodes in ICM Scripts ?? Appreciate your reply asap.

Hi,
Looks like the max. length described in the forms help only applied to actual database column. But if I am defining a non database column, what is the max. limit?
I tested it by setting to 32K (i.e.32767) and the form accepts and run ok. However, I am not sure whether there will be other side effect or not.
Kelly.

Similar Messages

What is the MAX. limit of a Message which PI can Handle?

Hi Experts,
We have one requirment where in we need to send a large data which contains some Memo Fields as well as Photo & PDF document thru PI Web-service scenario. we would like to know is there any Message Size Limit at PI side. is there any setting. i this moment i do not know what will be the size of the message will get form. pl. note that this will be B2B scenario.
secondly for a given message how can i check the size of the message. we are on PI 7.31 JAVA Only SP9 Patch 11.
Regards,
Umesh

Hi Umesh,
as for as i know SAP PO system can handle the file till GB also but this will be based upon your system resources and configuration as well.
Please find the below link for further information.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2010/10/18/pixi-pi-73-processing-of-large-files--teaser
Regards,
Naveen

What is the Max Number of Total Work Process that we can Have on One C.I

Hi,
What is the Max Number of Total Work Process that we can have on a Single C.I
Is there any Limit that We can only have Perticular Number of Total work process ?
Or it is just Unlimited number of total work process
Thanks & Regards
Dan.

from the system throughput point of view a rule of a thumb is:
1 up to 4 sometimes 5 workprocesses per CPU.
(one is used in Benchmarks where you have a very small number of transactions running with a small amount of database accesses)
you can easily find it out:
configure 4 WPs per CPU. If you have a number of WP's consuming nearly no CPU time you can reduce the number of WPs.
regards
Peter

What is the max memory a 2nd Gen iMac (2008) can run and where can I buy it?

What is the max memory a 2nd Gen iMac (2008) can support and if it is more than 2GB, where can you purchase?

Go to Crucial.com or OWC, you will get good advice and good memory suitable for Macs.
http://www.crucial.com/uk/index.aspx?gclid=CJyMwKGJuL0CFWfLtAodGXEAMQ&cm_mmc=goo gle-_-uk-_-brand-_-null&ef_id=UzbobwAAAS7VFVy@:20140329153615:s. Note UK site.
http://eshop.macsales.com/?utm_source=google&utm_medium=cpc&utm_campaign=adwords &gclid=CNLf77iJuL0CFTCWtAodiFUAVA

What is the max limit

I have written a file parser to insert a CSV directly into a table. The CSV contains 2 fields that would be considered memo fields in Access.
Now I get this Error: (ORA-06502: PL/SQL: numeric or value error ) when I run this section of code:
DBMS_LOB.converttoclob (v_text_file, v_binary_file, DBMS_LOB.lobmaxsize, v_dest_offset, v_src_offset, DBMS_LOB.default_csid, v_lang_context, v_warning); The error I believe is relating to this section of the code: DBMS_LOB.lobmaxsize .
My questions are:
What is the max size of DBMS_LOB?
And has anyone had any success inserting/parsing a field that contains 10000+ characters with Access embedded special characters?

Hello,
" Only problem that I have with OMWB is that it converts on memo field into a clob but the other into a varchar2(255) and truncates the data"Are you talking from experience? The varchar2 limitation doesn't make sense to me. I didn't use the tool my self, but I remember reading that the Oracle model can be changed. Maybe you should check the documentation more carefully. You can also try to open a new thread, with a specific subject on Access migration. That can draw the attention of the experienced posters.
" Hopefully the APEX team can come up with something about converting/recognizing Access special characters in the next version."From what I'm reading about ApEx 3.0 the last few days, it seems it will include a dedicated tool for Access migration.
Regards,
Arie.

What is the max number of SMS & MMS messages that the iphone can store?

iOS currently has a limit of 100 phone calls that can be stored in the call log. Is there a similar limit for SMS or MMS messages? If so, what it is? Where is this documented?

When you run out of space. Each phone is different, and it would depend on how many apps and how much music (if any) you have installed.

What is the max number of bits a boolean array can have?

Hello,
What is the maximum number of bit that a boolean array can have?
Regards,
Kaspar
Regards,
Kaspar

There is no real size limit. (except for the natural limits of arrays because the size is a 32bit integer, etc.)
... of course if you ever plan to convert it back to an integer using "boolean array to number", you better stay below 64 bits.
Can you explain what you want to do in a bit more detail?
Message Edited by altenbach on 05-23-2007 02:51 PM
LabVIEW Champion . Do more with less code and in less time .

What is the max size of a mp3 file you can add to an RSS feed?

I am working on adding a mp3 file to my website with an RSS
feed. I want to use it for a podcast. I am new to the xml language
and was using a freeware program to generate the script but it will
only let me upload a file around 10MB. My mp3 file is around 45MB.
Is this going to be too big of a file that will need to be broken
down or is there another way to do it? Does dreamweaver have
preformatted templates to make pages needed for podcasts? Thanks
for your time.

I don't understand. Why (or how) would you want to embed a
binary format in an xml file? What problem could this possibly
solve?

What is the max no of pages a Script can add using OATS?

HI,
I am getting some problems when no of pages in a script are more,Do anybody knows what is the max limit
of pages we can add in a Script.

i have scripts of more than 100 pages and did not see this issue on those script but had encounter this with even few pages scripts. Probable reason could be issue with VB code and I observed following work around works
- Rename VBA file of that script with some other working script file and try toopen script, you may need to do your VB code again
- Click on error and go to tool menu and click on any menu item which is not grayed out and click on it
Other thing we did was to maintain script in versioning tool and we go back to earlier version if we see this issue.
hope this helps

Export/Import-SPSIte :- What is the max size limit that can be moved using this command??

Export/Import-SPSIte :- What is the max size that can be moved using this command??

I assume you ment Export-SPWeb not Export-SPSite command.
There is no known limitations in file size, except the compression file size that is set to 24MB by default. If you exceed 24MB, the cmp file will be splitted into several files. You can change the default 24MB value up to 1024MB, using the -compressionsize
parameter.

What is the maximum number of Call Types, Skill Groups and Campaigns created in ICM 8.0.1 and 8.0.3

Hi All,
What is the maximum number of Call Types, Skill Groups and Campaigns created in ICM 8.0.1 and 8.0.3?
In which the above requested information will be available??

Oh I see. So I guess what you are saying is that is
Director's way of compressing vector numbers. Also, as to what you
were saying about the number 3000 is sure not the limit for vector
units, I think I was just jumping the gun considering that I only
glanced at the script error, and then clicked on the debug button
to see where the error happened. Then once I looked at the varibles
in the varible window, I saw these weird numbers with the e3 at the
end of them, and I just thought that it could not add the vectors
together with the e3 at the end of each vector unit. However, to
make a long story short, I detached the script and reattached it
which did no create the error again, and I learned that Director
can add vector units together that have an e3 at the end of each
vector unit. So thanks for clarifying what the e3 means.

What is the max. count of internal worker-threads in B1iSN 88?

Hi Experts,
We have an installation of B1iSN 88 with an ECC 6.0 and 54 SAP Business One installation. The Hardware is 8 Core multi-threads processor. 32GB Memory. Now we have a problem with the queuing of Events. What we have found is that the configuration of the internal worker-threads is set to -1(please see below for the settings). We change the settings to xcl.threads=20 and it improves the queuing. My question is what is the max. count of internal worker-threads per core? so that we can know how many worker will set and if we need to upgrade the CPU to 16 Core..
# The max. count of internal worker-threads afforded for the internal Scheduler (defaults to 1)
# The value of 0 means that there is no limit (what in general should not be set up).
# A negative value means the count of threads per available processor
xcl.threads=-1
Regards,
Wilson

You're very welcome.
Yes, they are very nice machines.
What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
The downside of that model is that there are no settings for ahci or raid.
I own or have owned every CMT since the d510 with the exception of the dc7900.
My main PC is now the 8200 Elite CMT which I installed W8.1 on.
It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
I threw in a Radeon HD 6670 in that one.
Best Regards,
Paul

What is the max number of hyperlinks supported in a PDF docment?

What is the max number of hyperlinks supported in a PDF docment?
How do I find out how many hyperlinks there are in a PDF document?

I don't think there's a limit to the number of links you can add to a file...
This code (taken from the reference files) will report the number of links in your file:
var numLinks=0;
for ( var p = 0; p < this.numPages; p++)
var b = this.getPageBox("Crop", p);
var l = this.getLinks(p, b);
console.println("Number of Links on page " + p +" is " + l.length);
numLinks += l.length;
console.println("Number of Links in Document is " + numLinks);

What is the max size of a zip file with the JDK1.5 ?

Hello everybody,
I'm a french student and for a project, I need to create a zip file, but I don't know in advance the number and the size of files to include in my zip.
I wish to know if someone have the answer to my question : what is the max size of a zip file with the JDK1.5 ? I believe that with the JDK1.3, the limit size of a zip was about 2Go, wasn't ?
Thank you for all answer !
Good day !
PS : sorry for my very poor english ;-)

Here is all I have found for the moment :
...Okay, what about my suggestion of creating your own 10GB file?
Try this:import java.io.File;
import java.io.RandomAccessFile;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
import java.util.Random;
class Main {
    public static void main(String[] args) {
        long start = System.currentTimeMillis();
        int mbs = 1024;
        writeFile("E:/Temp/data/1GB.dat", mbs);
        long end = System.currentTimeMillis();
        System.out.println("Done writing "+mbs+" MB's to disk in "+
                ((end-start)/1000)+" seconds.");
    private static void writeFile(String fileName, int numMegaBytes) {
        try {
            int numBytes = numMegaBytes*1024*1024;
            File file = new File(fileName);
            FileChannel rwChannel =
                    new RandomAccessFile(file, "rw").getChannel();
            ByteBuffer buffer = rwChannel.map(
                    FileChannel.MapMode.READ_WRITE, 0, numBytes);
            Random rand = new Random();
            for(int i = 1; i <= numMegaBytes; i++) {
                for(int j = 1; j <= 1024; j++) {
                    byte[] bytes = new byte[1024];
                    rand.nextBytes(bytes);
                    buffer.put(bytes);
            rwChannel.close();
        } catch(Exception e) {
            e.printStackTrace();
}On my machine it took me 43 seconds to create a 1GB file, so it shouldn't take too long to create your own 10GB. Then try zipping that file.
Good luck.

What's the max number of columns a table can have on 32 bit OS & 64 bit OS

What is the max number of columns a table can have on 32 bit OS & 64 bit OS ?
Edited by: sameer naik on 02-Jul-2010 02:11

For TimesTen 7.0 and 11.2.1 releases the limit on the number of columns per table is 1000 for both 32 and 64 bit TimesTen. This can be found in the documentation under System Limits.
Regards,
Chris

What is the Max. Limit of ICM Script Nodes that can be set in ICM Script 8.0

Similar Messages

Maybe you are looking for