What is the optimum core configuration for a new Mac Pro to process and manipulate very large (80 megapixel) images using PhotoShop and Camera Raw?

Hello:
I will be using creative techniques to process and manipulate a large number (hundreds) of very large (80 megapixel) images captured using a medium format digital back (Phase One IQ180).
Final output will be digital fine art imagery printed using an Epson 11880 at large sizes (up to 60 inches x ?), retaining the highest possible quality and resolution. I will be using Adobe CC PhotoShop and Camera RAW as well as Capture One software. PhotoShop filters will be used extensively.
The Mac Pro needs to be optimized for the above purpose and be useful for at least five years. I plan to max out all the other options (RAM, graphics cards, storage). Performance is more important than cost.
The few discussions I have found that mention optimum core configurations seem to lean toward 6 or 8 (but likely are not taking into consideration my need for manipulating a large number of very large files), so I am looking to this foum for opinions.
Thank you,
Kent

See if this helps
http://macperformanceguide.com/index_topics.html#MacPro2013

Similar Messages

  • What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos.

    What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos. Using USB connection.

    That's a difficult one but I'd always go for HP as they make so many excellent models that you'll always be able to buy the cartridges from almost anyone.  Theyre darn good printer too.  I have four in the office here and one of them is a very neat flatbed with exceptionally high tonal qualities.  One of their cheaper models is the HP 5520 A4 inkjet all-in-one - CMYK.  Good value at £70 and 4800 x 1200 DPI. 

  • What is the standard component configuration for tuition fee reimbursement   in sap webdynpro?

    what is the standard component configuration for tuition fee reimbursement  in advance claims  in hrms in webdynpro?

    Hi Debo,
    What is your exact requirement?
    Are you trying to find the standard configurations available for a webdynpro application? then, use t-code SE15 and open the application name and use the tree structure to find out the available configurations under WD application.
    sample:
    Regards,
    Rama

  • What is the optimum charge voltage for IPOD Touch latest version?

    Genuine Apple Chargers have either 5V, 10V or in some cases 12V for IPODs/IPADS; what is the optimum charge voltages for IPODs and IPADs?

    All the newer iPods, all iPod touches, all iPhones and all iPads use the USB voltage which is 5V DC. Some chargers say 5.1 V.
    Old iPods use FireWire charging which is 12 V DC

  • What is the best RAID configuration for a MacPro as a Logic User?

    There ought to be a universal answer to this question: what is the best RAID configuration for Logic Mac Pro users? I will be more specific.
    I use Logic Studio, Reason, Ableton, and Motu Symphonic Instrument simultaneously.
    I want to fail safe my precious audio files and improve performance as the system reads/writes data from multiple files, from audio tracks to digital samples.
    I want to run video files simultaneously to do nifty audio soundtracking to video.
    Here is the configuration I have in mind.
    HD 1: OS and Logic Studio, Reason/Ableton samples etc. software (non-raid) (250 GB)
    HD 2/3: MIrrored RAID set for AUDIO FILES (500 Gb identical pair)
    HD 4: Video files / Bouncing (1 TB)
    Makes sense right? A disk for reading software. A pair of 500 GB disks for reading/writing audio files and sessions in mirrored array. A 1 TB disk for video and bouncing. The main question I have is, for audio files only, is striped or mirrored better? 64K blocks the best? And are there any more details. I assume to do this in Disk Utility.

    Well, both Mirrored and Striped have their pros and cons. If you use mirrored, it will offer no better performance than the spec'ed drive along with it's sata bus speed. The plus point is, if one drive goes down, you have the second as a backup as the complete contents of one drive are mirrored on the other.
    With striped you will get a performance boost because all files (for example a single project) will get written across both drives and hence split the load on the drives and the SATA busses. The drawback is that you'll have to make sure you have a good, regular backup schedule in place because when one of the drives goes to drive heaven, you're going to be stuffed without a full backup of both drives.
    Exactly what performance boost you'd get will depend on your project, number of files, size of files, fragmentation of files, track count etc. You may find it would be easier to use the 3 drives straight, with no raid and have:
    HD 1: OS and Apps. No samples at all.
    HD2: Audio Files for Logic projects
    HD3: Reason, Ableton, Logic etc instrument sample library
    HD4: Video and bouncing.
    Which is what I ended up doing although I use HD4 as an interchangeable backup for HD1 and 2.
    There is no universal answer to this as each must make their own choice based on their preferences and needs. Mirrored will give you full backup but on-site, in machine backup. Not much good if something untoward and drastic happens to the physical machine. I think a few people toy with striped RAID but fall on the side of using the drives straight, as in their projects they don't see a big enough gain over splitting the data across your 3 remaining drives without RAID. Studios that seriously consider raid often go out and get a dedicated raid that can offer more variations than raid 0 or raid 1 (Striped and Mirrored) and better throughput.
    I hope this helps a little and not just added to the dilemma.

  • What is the best 500GB HDD for a 2007 macbook pro

    what is the best 500GB HDD for a 2007 macbook pro. This is a pre unibody machine.
    I am upgrading at the minute and can't make my mind up. I need a 7200rpm drive, but have heard some stories concerning overheating etc.
    These are the drives I am looking at: Seagate Momentus, Hitachi Travelstar and Western Digital all 500GB, running at 7200rpm.

    If you haven't already, you might look a the user comments at http://www.newegg.com on those hard drives. If you don't get other comments here, you might post in the MBP discussion (this is the iMac discussion) at https://discussions.apple.com/community/notebooks/macbook_pro

  • What is the best protective case for 2011 13" Macbook Pro

    What is the best protective case for 2011 13" Macbook Pro (that can withstand an active 4 year old :).   My 4 year old plays with the teaching apps on my iPhone 4 in the otterbox case and its great - the bulkiness of the otterbox not an issue and I love being able to give the phone to him and feel completely comforatable. I would love to find something to protect my Macbook Pror. Thanks for any help!! 

    I would definitely go for a Hardsheel or a Perforated Hardshell Case

  • What is the best security lock for a 17" mac book pro?

    Hello Folks! Happy holidays!
    Quick question:
    What is the best security lock for a 17" mac book pro?
    Any models or brands ?
    Cheers!

    Most computers refer to the locking attachment in some relationship to the name "Kensington", and that might be a useful clue.
    Following that, be sure to avoid counterfeit products. A well-known computer vendor (not Apple), was approached by a large purchaser (several tens of thousands of laptops) who insisted on using a counterfeit locking product that had a larger than normal locking tab. The vendor modified the tooling to accept the counterfeit product and, wouldn't you know it, the genuine product would no longer secure the computer properly.

  • What is the best overhead projector for a new 13" MacBook Pro

    What is the best overhead projector for a new retina display macbook pro?

    The key issue you should be worried about is what's the best projector for the intended room/environment/audience you will be projecting from/to. The Mac is just a content provider and will always exceed the resolution capabilities of all projectors in the market so will have to downgrade its output to suit their reduced capabilities. 
    Only thing you may want to make sure is that the projector have digital HDMI input. That way you can plug the Retina in with just a cable and not need to purchase any intervening adapter dongle prone to failure or misplacement.

  • Can I migrate/copy my iTunes configuration to a new Mac Pro?

    I have been able to copy over the sparse-bundle backups and restore.   But what I need to know is if I can copy over the entire configuration of iTunes (not just the music) such that my sync settings are retained (ie: sync only checked songs).  I have a considerably large collection of music and there's no way I want to go through selection again.   I just had my iPhone replaced, have a new cylinder Mac Pro to which I want to migrate this data.
    I did perform an rsync of the Music directory structure to my new Mac Pro, but it appears to be missing settings (as I mention above).   I imagine that's stored elsewhere.
    Could someone elaborate?
    Thanks!

    Found out how to address plist conversion from this page:
    http://hints.macworld.com/article.php?story=20050430105126392
    But I think iTunes has sorted this out.  As my $HOME is actually /Users/username and not /Volumes/Home/username on the new Mac.  We'll see... I'm sync'ing now

  • What is the best system configuration for a video editing telecast quality using Adobe PRemier pro

    We need an editing suite for telecast quality for our church.
    What is the best system configuration please?
    What are all the requirements to set it up ?

    Buy a Desktop Video Editing PC http://www.adkvideoediting.com/
    Build a Desktop Video Editing PC
    -http://ppbm7.com/index.php/tweakers-page
    -3 price level ideas in http://www.pacifier.com/~jtsmith/ADOBE.HTM
    -what PC to build http://forums.adobe.com/thread/947698
    -2 how to build videos http://forums.adobe.com/thread/1104182
    -another video http://forums.adobe.com/thread/1145366
    -another video http://forums.adobe.com/thread/1132363
    -planning & Building http://ppbm7.com/index.php/intro-part-1
    -memory for LGA2011 http://forums.adobe.com/thread/1098759
    -an Adobe FAQ http://forums.adobe.com/thread/878520
    -http://www.shawnlam.ca/2012/premiere-pro-cs6-video-editing-computer-build/
    -http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge
    +E/0xe9b142f408a2b03ab88144a434e88de7.aspx
    -several more links http://forums.adobe.com/thread/815798
    -build tuning http://ppbm7.com/index.php/final-results

  • What is the optimum screen resolution for Macbook Pro 15 inch?

    Hi, can anyone please provide advice on the optimum screen resolution for a 15 inch MacBook Pro?

    Natively you'll get a resolution of 1440 x 900 or you can pay for an upgrade  to 1680 x 1050(current models).

  • Advice for a RAID configuration in my new Mac Pro

    I just got a brand new Mac Pro and I am looking to get the fastest possible render and encode times possible. Originally I bought an eSATA PCIe card but was not impressed with the transfer times. In another forum a user suggested that I setup a RAID5. What kind of drives and RAID cards do you recommend as pro videographers? I suppose I can use my 1TB G-Drive as cold storage for the captured video. Any ideas?

    Tell me what you think of this potential setup then...
    Hard Drive Bay 1
    1TB Hard Drive from Apple that came with my Mac Pro
    Hard Drive Bay 2
    Cold Storage/Backup for Bay 3 & 4
    Hard Drive Bay 3
    RAID 0 with Bay 4
    Hard Drive Bay 4
    RAID 0 with Bay 3
    I'm looking at getting three of these hard drives for the 3 empty hard drive bays...
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822136284
    What would you guys recommend I do with my 1TB G-Drive? It has USB, FireWire 400, FireWire 800, and eSATA.

  • Is a SSD drive for a new Mac Pro "worth it"?

    I will be purchasing a new Mac Pro quad-core in the next month or so. My computer usage, other than email and some word processing, consists primarily of editing RAW photo files using Nikon Capture NX2, Photoshop Elements, and iPhoto. I do almost nothing with video. Would a SSD boot drive offer me any significant advantage over a 1 TB hard drive? Would it appreciably speed up photo editing of the RAW files, or simply boot faster? If you do recommend one, what size would I need for a boot drive to contain the OS and all program software? I will be upgrading from my current G5, so I suspect anything will initially seem very fast. Thanks!

    It depends on just how dependent on disk I/O your software is. Hard drives are still, by far, the slowest link in the performance chain for a computer. If your software is primarily CPU bound and goes to the hard drive very little, you won't notice the benefits of an SSD that much. I use Apple's Aperture, and Aperture is VERY sensitive to disk speed for the volume where your library file is. There are several key databases in the library package that are extremely sensitive to disk performance and particularly file fragmentation.
    I have an OWC Mercury Extreme SSD that I use for my operating system and applications, and then I have a RAID 0 of three Western Digital Hard drives for my Aperture library. RAID 0 is striping with no parity. Since there is no parity and no protection from hardware failure, I back up with TimeMachine, manual copies and I also use Mozy.com for automatic offline backups.
    The machine boots nearly instantly, and application launching is extremely fast. Most programs show a definite improvement and overall I am very pleased with the configuration.
    However, Aperture's library databases are extremely prone to fragmentation. There is a noticeable and significant increase in performance every time I defrag my aperture volume with iDefrag, and if I have a really long editing session I can notice performance degrading over time.
    Right now my workflow with Aperture is pretty sporadic, so defragmenting routinely isn't that big of an issue. However, I anticipate getting into Aperture more as I start photographing more projects. I think if that happens, I will probably get a second SSD and also finally convert my Aperture library from managed to referenced. Apple has added features in Aperture 3 so that referenced libraries aren't that big of a PITA, so I should be able to keep the Aperture databases on the SSD and reference my masters on my RAID drive. Best of all worlds.
    Also do not buy the SSD from Apple. Right now the only viable SSD's are ones that do internal garbage collection like the OWC Mercury Extreme. See my other post here for the ups and downs of SSDs:
    http://discussions.apple.com/thread.jspa?messageID=11248829&#11248829

  • How do I get pages 4 for my new mac pro?

    I have a new Mac Pro (running Mavericks) that comes packaged with the unusable Pages5.  I use Pages4 on my Macbook Pro and also want to use it on my Mac Pro.  Since it's no longer available for purchase, can someone please tell me how I can get a version onto my Mac Pro? 
    Thanks.
    lrf

    Yes you can.
    Purchase iWork '09 very cheaply from Amazon, less than $20, or migrate it over from an old System/Mac. Just make sure you update it to v 4.3.
    Peter

Maybe you are looking for

  • In query SQVI unable to join the table konv

    Hi Guru's I have a requirement from the user, extract the Open PO's with INCO TERMS and CONDITION TYPES. 1. what is the process to extract the OPEN PO's from table EKKO. In normal process I can extract Open PO's from ME2L and for a perticular Open PO

  • Product / BOM structure

    Manufacturing involves 2 processes - A and B. In process A, multiple SKU are processed (group of SKU are processed as one material). In process B, each SKU is processed individually. This scenario is like variant configuration in production order (in

  • Search in notification long text

    Hi, Is there a SAP built-in way to search in the PM notification long text field? e.g. From a list, with TREX, etc.? I use ECC 6.0 Thanks François

  • Told my software is counterfeit, when it isn't.

    I purchased a new computer. I uninstalled Adobe CS6 Design & Web Premium from the old PC, then ran the install on the new PC from the files I downloaded from https://adobe.subscribenet.com Installation halted with a message installation cannot contin

  • Datasource XML: how Synchronize from file?

    Hi, i''ve a XML datasource that it works fine, and i've an interface that move some content of this datasource to an oracle database. All work fine, but only on the first execution. If i do some changes on XML datasource (in XML File, add or update e