What is the package name where the default SE11 programms are stored ?

Can any one help me in finding out the package name where the deault SE11 programms are stored... Programms like Creating database table, Creating domains Etc......
Please help !
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Jul 18, 2011 4:41 PM

Hi Venkat,
Check out table /SAPSLL/LEGCOM. I guess that's what you're looking for.
Best regards,
Dave

Similar Messages

What is the default name of the folder where the cache (i.e. Firefox's temporary internet files) is stored?

What is the default name of the folder where the cache (i.e. Firefox's temporary internet files) is stored? Basically, what folder is Firefox's equivalent of Temporary Internet Files?

You can find the location of the cache on the about:cache page (open that page via the location bar like a website).
Only large image and media files are stored as individual files on disk. 
Other files are stored in a few large container files (_CACHE_XXX_) in the cache folder and not as separate files on disk. 
The individual files on disk have random names without a file extension for security reasons: you can't open an application or start a downloaded virus inadvertently by clicking a file in the cache folder. 
You can look at this extension for easier access to files in the cache.
* Cache Viewer: https://addons.mozilla.org/firefox/addon/2489

What is the default user name and password for oracle databse 10g

Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
thanks

system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
In case passwords have been forgotten, those can be reset:
From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
OS> sqlplus / as sysdba
SQL> alter user sys identified by yourNewSysPassword;
SQL> alter user system identified by yourNewSystemPassword;
And you're done with it.
HR Madrid

What is the default file name of BAPI trace?

hi expects,
what is the default file name of BAPI trace?

What BAPI trace?.. Did you mean RFC trace?
In Windows the RFC trace filename starts with "RFC" followed by the process ID of the client program. The trace must be activated first, naturally.

What is the default port on visual administrator with 2004s

Hi
I just finished the install of Netweaver 2004s and oracle is up and running and the j2ee engine as well.
I want to lauch the visual administrator but unable to connect
its saying cannont connect to ip and port....
What is the default port for the first time login
Also,
went threw my web browser was able to access the portal page of the Netweaver... I tried the sap* user name but doesn't work
JF

Hi Jean
The default port for VA is 5XX04 (where XX is the instance number)
the user for the portal is Administrator (not sap*) and the password is the one you used on the installation.
Hope this help
Juan
Please reward with points if helpful

What is the default password on Pet Store 1.3 when rebuilt?

I am unable to log into either the administrator client or the receiver application after rebuilding the WebLogic Server Pet Store Application. Neither jps_admin/admin nor rsvr/rcvr works. I saw a post referencing security.xml, but that file does not appear to be in this package
The default passwords worked when I used just the Pet Store template and prebuilt application, but the admin client would wait forever trying to get data, even when the client was ran from the same box as the server.
I am running WebLogic Server/Express 7.0 with SP7 for RHEL on Red Hat Enterprise Linux 4, Update 3 x86.
What should the default login names be? Or even better, if someone has seen the admin client unable to get data, how do you solve that?

On my painfully new 11.1.2 install, and per the install instructions, the username and password are as follows:
epm_admin
whatever you set up -- (As I only ever use one of three different ones when I do installs, it wasn't too hard to go through all of the possibilities)
See: http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install/frameset.htm?webLogicDomainName.html
Regards,
Cameron Lackpour
Edited by: CL on Aug 3, 2010 11:14 AM

What's the Default Password for Logging into huawei switches?

I was wondering if I bought the Huawei switches,
what’s the Default Password for Logging into them? so many people may have the same question that if bought a Huawei switch, what's the default password for logging into the switch? and maybe different kind of switches have different kind of passwords,
so maybe all of us wanna know them clearly.
Here, i'll tell you.
As for the bootrom default code:
Huawei S9300 V100R006 and the earlier version is 9300
Huawei S7700 V100R006 and the earlier version is huawei
And you can log into
http://www.huanetwork.com/blog/whats-the-default-password-for-logging-into-huawei-switches/ for more information, really useful.

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

What is the default username and password for a Airport Time Capsule 3TB

What is the default username and password for a Airport Time Capsule 3TB

There is no default user name on any of the AirPort routers, but the default password is......
public

What is the default admin user account login id and password in Windows 8?

Hi all,
The current admin acccount in Windows 8 system are changed to Standard and no other Admin account is available in the system.
What is the default admin user account login id and password in Windows 8?
Or
Is there way to change the User role for the account?
Please use Marked as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
What is the default admin password. How can i reset it form my user account
C:\Users\Amit>net user Administrator
User name                    Administrator
Full Name
Comment                      Built-in account for administering the computer/domain
User's comment
Country/region code          000 (System Default)
Account active               No
Account expires              Never
Password last set            7/26/2012 12:57:03 PM
Password expires             Never
Password changeable          7/26/2012 12:57:03 PM
Password required            Yes
User may change password     Yes
Workstations allowed         All
Logon script
User profile
Home directory
Last logon                   9/16/2013 1:16:30 PM
Logon hours allowed          All
Local Group Memberships      *Administrators
Global Group memberships     *None
The command completed successfully.

What is the default Constraint States

When we are creating the constraints, we can mention any of the 4 states viz
•ENABLE VALIDATE
•ENABLE NOVALIDATE
•DISABLE NOVALIDATE
•DISABLE VALIDATE
Question is : what is the default states, if we do not mention any one of those.
If possible also give me the oracle document link.
Thanks
Naveen.

Question is : what is the default states, if we do not mention any one of those.query USER_CONSTRAINTS for the answer
SQL> desc user_constraints
Name                            Null?    Type
OWNER                            NOT NULL VARCHAR2(30)
CONSTRAINT_NAME                  NOT NULL VARCHAR2(30)
CONSTRAINT_TYPE                        VARCHAR2(1)
TABLE_NAME                       NOT NULL VARCHAR2(30)
SEARCH_CONDITION                        LONG
R_OWNER                             VARCHAR2(30)
R_CONSTRAINT_NAME                        VARCHAR2(30)
DELETE_RULE                             VARCHAR2(9)
STATUS                              VARCHAR2(8)
DEFERRABLE                             VARCHAR2(14)
DEFERRED                             VARCHAR2(9)
VALIDATED                             VARCHAR2(13)
GENERATED                             VARCHAR2(14)
BAD                                  VARCHAR2(3)
RELY                                  VARCHAR2(4)
LAST_CHANGE                             DATE
INDEX_OWNER                             VARCHAR2(30)
INDEX_NAME                             VARCHAR2(30)
INVALID                             VARCHAR2(7)
VIEW_RELATED                             VARCHAR2(14)
If possible also give me the oracle document link.Your answers are just a few clicks beyond the URL below.
http://tahiti.oracle.com
Let us know when you have found your answer.

HT5072 What is the default font for I-books author. I believe it is Helvetica 14. thanks/marv

What is the default font for I-books author, the one brest to choose so that book is readable om an i-pad. Is it Helvetica 14? How about the paragraph pf text that introduces each chapter (it is a larger font, I believe) Thanks.

It depends on the template and the part of the text. Just click your mouse on the text and you should see the font name in the format bar at the top.

What is the default timeout processing option in SSRS Server

Hi,
I am getting The operation has timed out error when trying to connect SSRS server sometime. So I would like to know what is the default timeout for report in seconds?
Thanks
Saikat

Hi Edward,
Thanks for your reply. I am using script task to connect web service. Below is the code I am using for generating reports connecting SSRS web service.
RS2005.ReportingService2005 rs;
RE2005.ReportExecutionService rsExec;
// Create a new proxy to the web service
rs = new RS2005.ReportingService2005();
rsExec = new RE2005.ReportExecutionService();
// Authenticate to the Web service using Windows credentials
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rsExec.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.Url = "http://" + (Dts.Variables["ReportingServicesServerName"].Value).ToString() + "/reportserver/reportservice2005.asmx";
rsExec.Url = "http://" + (Dts.Variables["ReportingServicesServerName"].Value).ToString() + "/reportserver/reportexecution2005.asmx";
string historyID = null;
string deviceInfo = null;
string format = "PDF";
//string format = "WORD";
Byte[] results;
string encoding = String.Empty;
string mimeType = String.Empty;
string extension = String.Empty;
RE2005.Warning[] warnings = null;
string[] streamIDs = null;
// Path of the Report
// string fileName = (Dts.Variables["DestinationPath"].Value).ToString() + "/" + (Dts.Variables["ControllerID"].Value).ToString() + "_" + DateTime.Now.ToString("MMddyyyy") + ".pdf";
//In PDF format.
String oFilePath = (Dts.Variables["DestinationPath"].Value).ToString() + "/" + "enVision_7DayReport_" + (Dts.Variables["ControllerID"].Value).ToString() + "_" + DateTime.Now.ToString("MMddyyyy") + ".pdf";
Dts.Variables["FileName"].Value = oFilePath;
// Name of the report
string _reportName = @"/Reports/Service Report";
string _historyID = null;
bool _forRendering = false;
RS2005.ParameterValue[] _values = null;
RS2005.DataSourceCredentials[] _credentials = null;
RS2005.ReportParameter[] _parameters = null;
_parameters = rs.GetReportParameters(_reportName, _historyID, _forRendering, _values, _credentials);
RE2005.ExecutionInfo ei = rsExec.LoadReport(_reportName, historyID);
RE2005.ParameterValue[] parameters = new RE2005.ParameterValue[1];
if (_parameters.Length > 0)
parameters[0] = new RE2005.ParameterValue();
parameters[0].Label = "ControllerID";
parameters[0].Name = "ControllerID";
parameters[0].Value = Dts.Variables["ControllerID"].Value.ToString();
rsExec.SetExecutionParameters(parameters, "en-us");
results = rsExec.Render(format, deviceInfo,
out extension, out encoding,
out mimeType, out warnings, out streamIDs);
using (FileStream stream = File.OpenWrite(oFilePath))
stream.Write(results, 0, results.Length);

What is the default buffer size if we dont specify in buffer write?

If we dont specify what is the default buffer size in BufferedWriter. How to increase/decrease the size of it?
What is the purpose of flush?
If flush() is not used, only partial content is written to the file. Is it because of the default size of the buffer.

THis is the bufferedwriter class, it helps to look at them, look at the bold underlined, thats answers your defualt buffer size
* @(#)BufferedWriter.java 1.26 03/12/19
* Copyright 2004 Sun Microsystems, Inc. All rights reserved.
* SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
package java.io;
* Write text to a character-output stream, buffering characters so as to
* provide for the efficient writing of single characters, arrays, and strings.
* The buffer size may be specified, or the default size may be accepted.
* The default is large enough for most purposes.
* A newLine() method is provided, which uses the platform's own notion of
* line separator as defined by the system property <tt>line.separator</tt>.
* Not all platforms use the newline character ('\n') to terminate lines.
* Calling this method to terminate each output line is therefore preferred to
* writing a newline character directly.
* In general, a Writer sends its output immediately to the underlying
* character or byte stream. Unless prompt output is required, it is advisable
* to wrap a BufferedWriter around any Writer whose write() operations may be
* costly, such as FileWriters and OutputStreamWriters. For example,
* <pre>
* PrintWriter out
* = new PrintWriter(new BufferedWriter(new FileWriter("foo.out")));
* </pre>
* will buffer the PrintWriter's output to the file. Without buffering, each
* invocation of a print() method would cause characters to be converted into
* bytes that would then be written immediately to the file, which can be very
* inefficient.
* @see PrintWriter
* @see FileWriter
* @see OutputStreamWriter
* @version 1.26, 03/12/19
* @author Mark Reinhold
* @since JDK1.1
public class BufferedWriter extends Writer {
private Writer out;
private char cb[];
private int nChars, nextChar;
private static int defaultCharBufferSize = 8192;
* Line separator string. This is the value of the line.separator
* property at the moment that the stream was created.
private String lineSeparator;
* Create a buffered character-output stream that uses a default-sized
* output buffer.
* @param out A Writer
*public BufferedWriter(Writer out) {*
* this(out, defaultCharBufferSize);*
* Create a new buffered character-output stream that uses an output
* buffer of the given size.
* @param out A Writer
* @param sz Output-buffer size, a positive integer
* @exception IllegalArgumentException If sz is <= 0
public BufferedWriter(Writer out, int sz) {
 super(out);
 if (sz <= 0)
 throw new IllegalArgumentException("Buffer size <= 0");
 this.out = out;
 cb = new char[sz];
 nChars = sz;
 nextChar = 0;
 lineSeparator = (String) java.security.AccessController.doPrivileged(
new sun.security.action.GetPropertyAction("line.separator"));
/** Check to make sure that the stream has not been closed */
private void ensureOpen() throws IOException {
 if (out == null)
 throw new IOException("Stream closed");
* Flush the output buffer to the underlying character stream, without
* flushing the stream itself. This method is non-private only so that it
* may be invoked by PrintStream.
void flushBuffer() throws IOException {
 synchronized (lock) {
 ensureOpen();
 if (nextChar == 0)
 return;
 out.write(cb, 0, nextChar);
 nextChar = 0;
* Write a single character.
* @exception IOException If an I/O error occurs
public void write(int c) throws IOException {
 synchronized (lock) {
 ensureOpen();
 if (nextChar >= nChars)
 flushBuffer();
 cb[nextChar++] = (char) c;
* Our own little min method, to avoid loading java.lang.Math if we've run
* out of file descriptors and we're trying to print a stack trace.
private int min(int a, int b) {
 if (a < b) return a;
 return b;
* Write a portion of an array of characters.
* Ordinarily this method stores characters from the given array into
* this stream's buffer, flushing the buffer to the underlying stream as
* needed. If the requested length is at least as large as the buffer,
* however, then this method will flush the buffer and write the characters
* directly to the underlying stream. Thus redundant
* <code>BufferedWriter</code>s will not copy data unnecessarily.
* @param cbuf A character array
* @param off Offset from which to start reading characters
* @param len Number of characters to write
* @exception IOException If an I/O error occurs
public void write(char cbuf[], int off, int len) throws IOException {
 synchronized (lock) {
 ensureOpen();
if ((off < 0) || (off > cbuf.length) || (len < 0) ||
((off + len) > cbuf.length) || ((off + len) < 0)) {
throw new IndexOutOfBoundsException();
} else if (len == 0) {
return;
 if (len >= nChars) {
 /* If the request length exceeds the size of the output buffer,
 flush the buffer and then write the data directly. In this
 way buffered streams will cascade harmlessly. */
 flushBuffer();
 out.write(cbuf, off, len);
 return;
 int b = off, t = off + len;
 while (b < t) {
 int d = min(nChars - nextChar, t - b);
 System.arraycopy(cbuf, b, cb, nextChar, d);
 b += d;
 nextChar += d;
 if (nextChar >= nChars)
 flushBuffer();
* Write a portion of a String.
* If the value of the <tt>len</tt> parameter is negative then no
* characters are written. This is contrary to the specification of this
* method in the {@linkplain java.io.Writer#write(java.lang.String,int,int)
* superclass}, which requires that an {@link IndexOutOfBoundsException} be
* thrown.
* @param s String to be written
* @param off Offset from which to start reading characters
* @param len Number of characters to be written
* @exception IOException If an I/O error occurs
public void write(String s, int off, int len) throws IOException {
 synchronized (lock) {
 ensureOpen();
 int b = off, t = off + len;
 while (b < t) {
 int d = min(nChars - nextChar, t - b);
 s.getChars(b, b + d, cb, nextChar);
 b += d;
 nextChar += d;
 if (nextChar >= nChars)
 flushBuffer();
* Write a line separator. The line separator string is defined by the
* system property <tt>line.separator</tt>, and is not necessarily a single
* newline ('\n') character.
* @exception IOException If an I/O error occurs
public void newLine() throws IOException {
 write(lineSeparator);
* Flush the stream.
* @exception IOException If an I/O error occurs
public void flush() throws IOException {
 synchronized (lock) {
 flushBuffer();
 out.flush();
* Close the stream.
* @exception IOException If an I/O error occurs
public void close() throws IOException {
 synchronized (lock) {
 if (out == null)
 return;
 flushBuffer();
 out.close();
 out = null;
 cb = null;
What Flush(); does
Example, you have a file called c, your writer is b and buffereredwriter is a. so your programs calls a, a talks to b, and b talks to c. when you call the Flush method, the information is sent to the outfile which is c immediately before you even close the file, because when you write to the file, it does not write directly, it writes to a buffer, so flush actually causes the buffer to write to file. Also if you call the close method on that file without the flush, the buffer will still get flushed.
consider BufferedWriter c = new BufferedWriter(new PrintWriter("c:\\c"));
you wrap printwriter into a buffered writer, now if you close this "connection" to the file, the buffer will get flushed, noting that all the data is sitting in the buffered and not yet in the file, and this happens if something dont break...

What is the default optimization(CBO/RBO) method choose in Oracle 9i DB?

What is the default optimization(CBO/RBO) method choose in Oracle 9i DB?
Note : If we set the OPTIMIZER MODE as CHOOSE

1) So you mean to say that, for all the tables if we are maintaining statistics, by default it will go for CBO, else RBO right?Yes, unless you dont specify a hint RULE to your queries. At least one table contains statsitics in a two or more table join select statement, oracle uses CBO and calculates statistics using their no. of blocks and other stuff, some internal calculations.
Also, becarefull, old statistics can lead optimizer to choose very pool plan that impact query performance.
2) If we are using CBO, then what will be the order of execution in the where clause, Is it from top to bottom, or reverse?If its a single table with where clause, then, oracle choose either full table scan, or index range scan depends upon the column mentioned in the where clause and availabl indexes.
If query contains multiple tables, then, oracle has to decide between join methods, such as, nested loop, hash join, sort merge join and etc.
3) And also If we are using RBO, then what will be the order of execution in the where clause, Is it from top to bottom, or reverse?
RBO uses its internal calculation to produce the execution plan, more probably gives preference to indexes if a column has an index which appears in the where cluase.
Jaffar

What is the default separateFrame in formsweb.cfg ?

Hello,
what is the default separateFrame,width & height in formsweb.cfg ?
am using Forms [32 Bit] Version 10.1.2.0.2 (Production)
i made changes 2 adjust the applete w/h 2 centered the form's window now i wana get back is it ..?
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
separateFrame=falseSince i have 2 separateFrame=false but i remmbered 1 of them where true by deault which one the first or the second 1 in order...?
Regards,
Abdetu...

Hi 815571
Thanks for reply
No 100% is not the default pls recheck, am quite sure...
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# Forms applet parameter
width= 750
# Forms applet parameter
height= 600
# Forms applet parameter
separateFrame=false
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame= True
lookandfeel=Generic
.....Regards,
Abdetu...

What is the package name where the default SE11 programms are stored ?

Similar Messages

Maybe you are looking for