What is the reason for query take more time to execute
Hi,
What is the reason for the query take more time inside procedure.
but if i execute that query alone then it excute within a minutes.
query includes update and insert.
I have a insert and update query when I execute
without Procedure then that query execute faster but
If I execute inside procedure then It takes 2 hours
to execute.Put you watch 2 hours back and the problem will disappear.
do you understand what I want to say?I understood what you wanted to say and I understood you didn't understood what I said.
What does the procedure, what does the query, how can you say the query does the same as the procedure that takes longer. You didn't say anything useful to have an idea of what you're talking about.
Everyone knows what means that something is slower than something else, but it means nothing if you don't say what you're talking about.
To begin with something take a look at this
When your query takes too long ...
especially the part regarding the trace.
Bye Alessandro
Similar Messages
-
Is index range scan the reason for query running long time
I would like to know whether index range scan is the reason for the query running long time. Below is the explain plan. If so, how to optimise it? Please help
Operation Object COST CARDINALITY BYTES
SELECT STATEMENT () 413 1000 265000
COUNT (STOPKEY)
FILTER ()
TABLE ACCESS (BY INDEX ROWID) ORDERS 413 58720 15560800
INDEX (RANGE SCAN) IDX_SERV_PROV_ID 13 411709
TABLE ACCESS (BY INDEX ROWID) ADDRESSES 2 1 14
INDEX (UNIQUE SCAN) SYS_C004605 1 1
TABLE ACCESS (BY INDEX ROWID) ADDRESSES 2 1 14
INDEX (UNIQUE SCAN) SYS_C004605 1 1
TABLE ACCESS (BY INDEX ROWID) ADDRESSES 2 1 14
INDEX (UNIQUE SCAN) SYS_C004605 1 1The index range scan means that the optimiser has determined that it is better to read the index rather than perform a full table scan. So in answer to your question - quite possibly but the alternative might take even longer!
The best thing to do is to review your query and check that you need every table included in the query and that you are accessing the tables via the best route. For example if you can access a table via primary key index that would be better than using a non-unique index. But the best way of reducing the time the query takes to run is to give it less tables (and indexes) to read.
John Seaman
http://www.asktheoracle.net -
Query take more time to execute
Hi
I am using in sql select statement two non exist statements it is taken more time to execute the query ,non exist is any impact query performance
thank's[email protected] wrote:
I am using in sql select statement two non exist statements it is taken more time to execute the query ,non exist is any impact query performanceI have a query that is using even more time to execute. Do I win? -
Can anyone say what makes "preparing video for display" take more time?
i searched old threads. the topic has been raised before but there didn't seem to be any satisfying answer... i have noticed that when i have 3 or more active video tracks and i move a shot on the timeline, i get the "preparing video for display" message. it takes about 20 second to display, which is a long time to wait for every little adjustment i try to make... and i'm not using more than 5 tracks (which doesn't seem like that much either...)
i am using FCP 5.0.4. my whole project is 5mb and the sequence is 4 minutes long. got some effects but nothing major at this point. i'm worried it'll get much worse as i add effects and layers.
does anyone know what may be causing this or how can i make this process faster?
is it something that can be adjusted in the settings?
it doesn't seem normal. i've never seen anything like this in AVID...
thanks...I'm at a loss at this point.
2 things...exactly what version of QT are you running? (may/may not make a difference)
Then, here are a couple of links for ways to trash preferences. Since you're on FCP 5.0.4, you should be good with the Anders Holck FCP Rescue 5.
Caveat...once you've trashed your preferences you'll need to reset them...might want to make notes of how they're set now.
If you use FCP Rescue 5, it will enable you to create a backup of your new prefs after they've been reset, then if you ever need to trash prefs again, you simply use the 'Restore' feature to get them back the way you want them quickly.
http://fcprescue.andersholck.com/
http://www.digitalrebellion.com/pref_man.htm
http://www.fcpbook.com/Misc1.html
Hope that helps,
K -
ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR
hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull. -
Illustrator keeps quitting…notice others have had similar issues…so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help…come on…someone has to have an answer…HELP Pleeeeease
<moved from Adobe Creative Cloud to Illustrator>
reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall -
I purchased a disk copy of CS6 Design and Web Premium from a reputable seller last week and when I try to install it with the serial number I got it says "We are unable to validate this serial number for CS6 Design and Web Premium. Please contact Customer Support." What is the reason for this?
Is the serial number invalid?Hi Ned,
Thanks for the suggestion. I eventually got in touch with Adobe Technical Support and it turned out that my Adobe Application Manager was not the latest version. They downloaded the latest version and installed it and that seemed to solve the problem. I was able to install my CS6 Creative Suite and validate the serial number. All seems to be going well at the moment. -
HT1222 What's the reason for this?
What's the reason for the security update? Was someone trying to get my info?
No one is trying to get your info. Just a part of the software release. Apple providing as much security as possible to protect your devices and Macs....
This is a GOOD thing....
GB -
hello! what is the reason for my itunes to react so slowly? thanks
I've requested your post be moved to the iTunes for Windows forum. XServes refer to the Mac OS X Server based server machines that Apple made for several years earlier this millennium.
-
Hi All,
I have cloned KSB1 tcode to custom one as required by business.
Below query takes more time than excepted.
Here V_DB_TABLE = COVP.
Values in Where clause are as follows
OBNJR in ( KSBB010000001224 BT KSBB012157221571)
GJAHR in blank
VERSN in '000'
WRTTP in '04' and '11'
all others are blank
VT_VAR_COND = ( CPUDT BETWEEN '20091201' and '20091208' )
SELECT (VT_FIELDS) INTO CORRESPONDING FIELDS OF GS_COVP_EXT
FROM (V_DB_TABLE)
WHERE LEDNR = '00'
AND OBJNR IN LR_OBJNR
AND GJAHR IN GR_GJAHR
AND VERSN IN GR_VERSN
AND WRTTP IN GR_WRTTP
AND KSTAR IN LR_KSTAR
AND PERIO IN GR_PERIO
AND BUDAT IN GR_BUDAT
AND PAROB IN GR_PAROB
AND (VT_VAR_COND).
Checked in table for this condition it has only 92 entries.
But when i execute program takes long time as 3 Hrs.
Could any one help me on this>1.Dont use SELECT/ENDSELECT instead use INTO TABLE addition .
> 2.Avoid using corresponding addition.create a type and reference it.
> If the select is going for dump beacause of storage limitations ,then use Cursors.
you got three large NOs .... all three recommendations are wrong!
The SE16 test is going in the right direction ... but what was filled. Nobody knows!!!!
Select options:
Did you ever try to trace the SE16? The generic statement has for every field an in-condition!
Without the information what was actually filled, nobody can say something there
are at least 2**n combinations possible!
Use ST05 for SE16 and check actual statement plus explain! -
Count (*) for select stmt take more time than execute a that sql stmt
HI
count (*) for select stmt take more time than execute a that sql stmt
executing particular select stmt take 2.47 mins but select stmt is using the /*+parallel*/ (sql optimer) in that sql command for faster execute .
but if i tried to find out total number of rows in that query it takes more time ..
almost 2.30 hrs still running to find count(col)
please help me to get count of row faster.
thanks in advance...797525 wrote:
HI
count (*) for select stmt take more time than execute a that sql stmt
executing particular select stmt take 2.47 mins but select stmt is using the /*+parallel*/ (sql optimer) in that sql command for faster execute .
but if i tried to find out total number of rows in that query it takes more time ..
almost 2.30 hrs still running to find count(col)
please help me to get count of row faster.
thanks in advance...That may be because your client is displaying only the first few records when you are running the "SELECT *". But when you run "COUNT(*)", the whole records has to be counted.
As already mentined please read teh FAQ to post tuning questions. -
Query Takes more Time when i execute from the Instant client.
Hi,
Currently in our Env we have some Queries takes more time when we run from the Instant Client.
System Details
OS=Solaris 10 x86 64bit
Oracle 10.2.0.4
Client Side
$ sqlplus trd_trd_ro/trd_trd_ro@prdba001/TRADE1
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Aug 9 16:26:25 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
SQL> set timing on
SQL> select mod(lastinstmessagesequence, 1000000000) LastInstIDSeqNo from tibex_msgseqbyuseralias where useralias='2221';
no rows selected
Elapsed: 00:01:54.19
SQL> Disconnected from Oracle Database 10g Release 10.2.0.4.0 - ProductionSame Query running on Server Side
^C130-oracle@prdba001 txt: sql
Database: trd_trd_owner/trd_trd_owner@prdba001/TRADE1
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Aug 9 17:15:18 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
trd_trd_owner@TRADE1> set timing on
trd_trd_owner@TRADE1> select mod(lastinstmessagesequence, 1000000000) LastInstIDSeqNo from tibex_msgseqbyuseralias where useralias='2221';
no rows selected
Elapsed: 00:00:00.12
trd_trd_owner@TRADE1> exitKindly help me what could be the Issues.Hi Charles,
Thanks for your Quick response.I pulled the info.
sys@TRADE1> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('bpxr7axhxaqvy',NULL,'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID bpxr7axhxaqvy, child number 0
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 1 | SORT GROUP BY NOSORT | | 1 | 21 | 0 |00:00:00.06 | 6121 |
| 2 | VIEW | | 1 | 21 | 0 |00:00:00.06 | 6121 |
| 3 | UNION-ALL | | 1 | | 0 |00:00:00.06 | 6121 |
| 4 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.05 | 3073 |
|* 5 | TABLE ACCESS FULL | TIBEX_QUOTE | 1 | 30080 | 0 |00:00:00.05 | 3073 |
| 6 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
| 7 | TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER | 1 | 971 | 0 |00:00:00.01 | 3 |
|* 8 | INDEX RANGE SCAN | TIBEX_ORDER_IDX_OLT | 1 | 971 | 0 |00:00:00.01 | 3 |
| 9 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 10 | TABLE ACCESS FULL | TIBEX_TSTRADE | 1 | 1 | 0 |00:00:00.01 | 3 |
| 11 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 12 | TABLE ACCESS FULL | TIBEX_IOIREQUEST | 1 | 1 | 0 |00:00:00.01 | 3 |
| 13 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 126 |
|* 14 | TABLE ACCESS FULL | TIBEX_BESTEXREL | 1 | 1 | 0 |00:00:00.01 | 126 |
| 15 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 2862 |
|* 16 | INDEX FAST FULL SCAN | SYS_C0058325 | 1 | 339 | 0 |00:00:00.01 | 2862 |
| 17 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 31 |
|* 18 | TABLE ACCESS FULL | TIBEX_EDPPULLORDERS | 1 | 1 | 0 |00:00:00.01 | 31 |
| 19 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 20 | INDEX RANGE SCAN | SYS_C0058803 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 21 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 22 | INDEX RANGE SCAN | SYS_C0057785 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 23 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 24 | INDEX RANGE SCAN | SYS_C0057827 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 25 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 26 | TABLE ACCESS FULL | TIBEX_DELETEADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 27 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 28 | INDEX RANGE SCAN | SYS_C0058148 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 29 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 30 | INDEX RANGE SCAN | SYS_C0058264 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 31 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 32 | INDEX RANGE SCAN | SYS_C0058516 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 33 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 34 | INDEX RANGE SCAN | SYS_C0058561 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 35 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 36 | INDEX RANGE SCAN | SYS_C0058783 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 37 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 38 | INDEX RANGE SCAN | SYS_C0058977 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 39 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 40 | INDEX RANGE SCAN | SYS_C0058859 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 41 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 42 | INDEX RANGE SCAN | SYS_C0059197 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 43 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 44 | TABLE ACCESS FULL | TIBEX_CANCELTRDADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 45 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 46 | TABLE ACCESS FULL | TIBEX_BULKCANCELADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
SQL_ID bpxr7axhxaqvy, child number 1
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
Plan hash value: 1955857846
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 1 | SORT GROUP BY NOSORT | | 1 | 21 | 0 |00:00:00.12 | 8545 |
| 2 | VIEW | | 1 | 21 | 0 |00:00:00.12 | 8545 |
| 3 | UNION-ALL | | 1 | | 0 |00:00:00.12 | 8545 |
| 4 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.10 | 5496 |
|* 5 | TABLE ACCESS FULL | TIBEX_QUOTE | 1 | 21056 | 0 |00:00:00.10 | 5496 |
| 6 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 4 |
| 7 | TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER | 1 | 660 | 0 |00:00:00.01 | 4 |
|* 8 | INDEX RANGE SCAN | TIBEX_ORDER_IDX_OLT | 1 | 660 | 0 |00:00:00.01 | 4 |
| 9 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 10 | TABLE ACCESS FULL | TIBEX_TSTRADE | 1 | 1 | 0 |00:00:00.01 | 3 |
| 11 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 12 | TABLE ACCESS FULL | TIBEX_IOIREQUEST | 1 | 1 | 0 |00:00:00.01 | 3 |
| 13 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 126 |
|* 14 | TABLE ACCESS FULL | TIBEX_BESTEXREL | 1 | 1 | 0 |00:00:00.01 | 126 |
| 15 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.02 | 2862 |
|* 16 | INDEX FAST FULL SCAN | SYS_C0058325 | 1 | 339 | 0 |00:00:00.02 | 2862 |
| 17 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 31 |
|* 18 | TABLE ACCESS FULL | TIBEX_EDPPULLORDERS | 1 | 1 | 0 |00:00:00.01 | 31 |
| 19 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 20 | INDEX RANGE SCAN | SYS_C0058803 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 21 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 22 | INDEX RANGE SCAN | SYS_C0057785 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 23 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 24 | INDEX RANGE SCAN | SYS_C0057827 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 25 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 26 | TABLE ACCESS FULL | TIBEX_DELETEADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 27 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 28 | INDEX RANGE SCAN | SYS_C0058148 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 29 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
PLAN_TABLE_OUTPUT
|* 30 | INDEX RANGE SCAN | SYS_C0058264 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 31 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 32 | INDEX RANGE SCAN | SYS_C0058516 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 33 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 34 | INDEX RANGE SCAN | SYS_C0058561 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 35 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 36 | INDEX RANGE SCAN | SYS_C0058783 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 37 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 38 | INDEX RANGE SCAN | SYS_C0058977 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 39 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 40 | INDEX RANGE SCAN | SYS_C0058859 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 41 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 42 | INDEX RANGE SCAN | SYS_C0059197 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 43 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 44 | TABLE ACCESS FULL | TIBEX_CANCELTRDADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 45 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 46 | TABLE ACCESS FULL | TIBEX_BULKCANCELADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
Predicate Information (identified by operation id):
5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
SQL_ID bpxr7axhxaqvy, child number 2
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads |
| 1 | SORT GROUP BY NOSORT | | 1 | 21 | 1 |00:00:00.13 | 8476 | 3 |
| 2 | VIEW | | 1 | 21 | 1 |00:00:00.13 | 8476 | 3 |
| 3 | UNION-ALL | | 1 | | 1 |00:00:00.13 | 8476 | 3 |
| 4 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.10 | 5283 | 0 |
|* 5 | TABLE ACCESS FULL | TIBEX_QUOTE | 1 | 21056 | 0 |00:00:00.10 | 5283 | 0 |
| 6 | SORT GROUP BY NOSORT | | 1 | 1 | 1 |00:00:00.01 | 148 | 3 |
| 7 | TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER | 1 | 660 | 150 |00:00:00.01 | 148 | 3 |
PLAN_TABLE_OUTPUT
|* 8 | INDEX RANGE SCAN | TIBEX_ORDER_IDX_OLT | 1 | 660 | 150 |00:00:00.01 | 5 | 0 |
| 9 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 10 | TABLE ACCESS FULL | TIBEX_TSTRADE | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 11 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 12 | TABLE ACCESS FULL | TIBEX_IOIREQUEST | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 13 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 126 | 0 |
|* 14 | TABLE ACCESS FULL | TIBEX_BESTEXREL | 1 | 1 | 0 |00:00:00.01 | 126 | 0 |
| 15 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.02 | 2862 | 0 |
|* 16 | INDEX FAST FULL SCAN | SYS_C0058325 | 1 | 339 | 0 |00:00:00.02 | 2862 | 0 |
| 17 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 31 | 0 |
|* 18 | TABLE ACCESS FULL | TIBEX_EDPPULLORDERS | 1 | 1 | 0 |00:00:00.01 | 31 | 0 |
| 19 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 20 | INDEX RANGE SCAN | SYS_C0058803 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 21 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 22 | INDEX RANGE SCAN | SYS_C0057785 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 23 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 24 | INDEX RANGE SCAN | SYS_C0057827 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 25 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 26 | TABLE ACCESS FULL | TIBEX_DELETEADMIN | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 27 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 28 | INDEX RANGE SCAN | SYS_C0058148 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 29 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 30 | INDEX RANGE SCAN | SYS_C0058264 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 31 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 32 | INDEX RANGE SCAN | SYS_C0058516 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 33 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 34 | INDEX RANGE SCAN | SYS_C0058561 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 35 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 36 | INDEX RANGE SCAN | SYS_C0058783 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 37 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 38 | INDEX RANGE SCAN | SYS_C0058977 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 39 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 40 | INDEX RANGE SCAN | SYS_C0058859 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 41 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 42 | INDEX RANGE SCAN | SYS_C0059197 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 43 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 44 | TABLE ACCESS FULL | TIBEX_CANCELTRDADMIN | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 45 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 46 | TABLE ACCESS FULL | TIBEX_BULKCANCELADMIN | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
Predicate Information (identified by operation id):
5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
PLAN_TABLE_OUTPUT
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
249 rows selected. -
What's the reason for " 'Writing XMP Metadata' did not complete successfully
I rightclicked an image and selected "save metadata to file" and got this not-so-very-informative error message. What could be the cause? The file is there and it is not write protected.
Adobe - what about giving some more information when LR encounters errors?
Win XP, LR 1.3.1While read only is the most likely cause, I have been trying to track down a similar problem which so far I can only equate to the creation time of the file ending in 00.
For example, I have a file taken at 6/13/2006 1:00:00 PM
If I do Metadata -> Edit Capture Time...
and set the time to be 6/13/2006 1:00:01 PM
Then click twice on the Resolve Conflicts button for Metadata, the second one works. Both times I tell it to overwrite the metadata on disk. My assumption is that the data processing logic has issues reading in entries like:
2006-06-13T13:00:00-08:00
I would even go so far as speculating it treats them as just the day and drops the hour / minute portion. The reason for this conjecture is that I stumbled on this issue when exporting images would occasionally have 2006/06/13 12:00AM as the timestamp and when I checked which ones had problems, they all were taken at 00 seconds into the minute.
Henrik, if you are still having this problem, does the file happen to have a 00 second creation timestamp? If so, try changing it by a second and I would be curious if you it starts working for you too.
Cheers,
John -
What is the reason for the following error
Hi,
I developed one site in this i have one filed which should give a message "Must contain Characters also" if it conatin less than 5 or more than 30 then only it should give the error message must be between 5-30. But it was giving some time between 5-30 characters and some time "Must contain characters" what will be the reason for this issue.> Hi,
I am working as App.Support to leading MNC today i
found one problem one of i.e. for particular
textfiled there is two validatoins one is that
Must Contain Characters also in Address
other one is Entry must contain characters between
5-30
But When i am accessing the site with out removing
cookies and offline files i am geting second error.
Where always it have to give 1st error.
If there's a Java-related question in there, I can't find it.
~ -
What are the reasons for disabling the saving of data in a PDF?
I seem to have had more than my share of encounters lately with PDF files that have editable fields but have their data saving capability disabled.
In some of these situations this has been an absolutely maddening inconvenience.
When I attempt to bring this to the attention of whomever's responsible I get brushed off.
One person's response was: Actually the majority of the PDF forms I have are Adobe reader and you cannot make changes electronically at all. The reason for this is to make sure that the documents are not altered in any way. The <companies creating the PDFs> must make sure that changes are not being made to their forms.
I just don't understand that. How is entering and saving data 'altering' a PDF?
Is this just bone-headed bureacracy, an urban legend, or is there some fundamental practical matter I am not aware of?Saving a filled-in form has always been disallowed with Adobe Reader, formerly known as Acrobat Reader. Though there are a few exceptions...
History lesson:
Forms features were first introduced in Acrobat 3. As you might imagine, a number of folks wanted to be able to save filled-in forms using Acrobat Reader. Since this functionality simply was not a feature of Reader, it was not possible. If you wanted to save a filled-in form, you needed to use Acrobat (Exchange).
Upon recognizing the potential market for a product that they could sell, Adobe developed and released Acrobat Business Tools, which was a version 4 product. It was positioned between Reader and Acrobat, was reasonably priced, and allowed users to save filled-in forms, apply digital signatures, and add comments. Unfortunately, this was marketed poorly and did not achieve commercial success.
The next iteration was a similar product named Acrobat Approval, which was a version 5 product. It too could save a filled-in form, but was in some ways more limited than Business Tools, and suffered a similar fate. That is, it was not a market success. It was however distributed for free to US taxpayers on the IRS tax products CD-ROM.
The next idea from Adobe - which was a good one - was to provide for a means of embedding usage rights in a PDF document. These rights would allow Reader to do things it normally would not be able to do, such as saving a filled-in form, adding comments, importing/exporting form data, creating new pages using templates, connecting to databases and web services, etc. At first, the only way to enable these usage rights was with an expensive product from Adobe, so the potential was initially not realized.
With the release of Acrobat 7, Acrobat users were able to add some usage rights, such as commenting. While this was a welcome addition, folks still wanted to be enable forms to be saved with Reader. Finally with the release of Acrobat 8 Pro, users were able to enable forms to be saved with Reader, but it came with licensing restrictions. In short, if the licensee distributed the form for more than 500 recipients, the licensee could use data from no more that 500 copies of a particular form that was returned to them, including hardcopies. This was great for forms used inside of an orginization, but not so great for forms that needed to be used by the general public. Still, it was a very useful feature for a majority of businesses for internal forms, the vast majority of which have fewer than 500 employees.
Acrobat 9 or 10 didn't change things. Adobe still wants to capitalize on this market, which certainly is not a bad thing for Adobe and their stockholders. The US IRS forms have long been saveable with Reader because they licence Adobe Reader Extensions, which provides revenue for Adobe.
Note that some third-party PDF viewers allow users to save filled-in forms whether or not the documents have usage rights. Such software has a different marketing model than does Adobe Reader/Acrobat, and rides the coattails of Adobe by taking advantage of the popularity of PDF forms.
Maybe you are looking for
-
what is the difference between ws_upload, gui_upload and ws_download and gui_download?
-
I am trying to sort photos in an album in a random fashion, like an iPod would shuffle songs. Except here's the small difference, every twenty photos or so I need to insert a specific photo. Playing the slideshow allows for a shuffle, but I want to s
-
Where does SRTCM fit into preparing ABAP for Hana?
I've seen and heard mention of transaction SRTCM (Runtime Check Monitor), to run in Production for one or two weeks to go alongside static code checks. I'm a little confused on how this fits into preparing our code for Hana though. If we use ATC/Code
-
What is the use of security pathces or cpu patches?
Hi All, What is the use of security pathces or cpu patches? Thanks, Vishal
-
[SOLVED]Awesome-wm's theme doesn't work
So I tried to use one of awesome's themes (zenburn,) the problem is when I startx there is just a black screen with a mouse pointer, which I am able to move. Here is my rc.lua: awful = require("awful") beautiful = require('beautiful') beautiful.init(