What is the sync notes setting in iTunes?

In the "info" tab that is listed in iTunes, under my iPhone when the iPhone is connected, there is a category called "Other".  In this category there is a chek box for an option referred to as "sync notes with".  If I select this option, what information is synced from the phone - ie. what contents from what application are copied to the distination I designate?

DaveZS wrote:
In the "info" tab that is listed in iTunes, under my iPhone when the iPhone is connected, there is a category called "Other".  In this category there is a chek box for an option referred to as "sync notes with".  If I select this option, what information is synced from the phone
The notes in the Notes app.

Similar Messages

  • What is the sync mail accounts in iTunes?`

    I was wondering what this was bc i check my hotmail account very often and the box is checked under "sync selected mail accounts" : "hotmail (HTTPMail: [email protected])" I check my mail app and nothing was there I also looked at the settings for mail and my hotmail wasnt there. what is this and what does it do?

    I think it might be there if you use Mobile Me. Then you could set everything up so that your touch and Mac can sync your mail accounts.

  • HT1296 I'm trying to sync the calendar from my phone on the my new mac. the "sync calendars" blurb in iTunes says, "your calendars are being synced with your iPhone over the air from iCloud".. not nothing is happening. what to do? what to do?

    I'm trying to sync the calendar from my phone on the my new mac. the "sync calendars" blurb in iTunes says, "your calendars are being synced with your iPhone over the air from iCloud".. not nothing is happening. what to do? what to do?

    or even better on mac sign into icloud with same apple id under system preferences and icloud
    they will merge automatically
    Peace, Clyde

  • What does the sync mail checkbox do in iTunes?

    Can anyone help me understand what checking the "sync mail" feature does when synching my iPhone with iTunes?
    I'm not sure that it does anything since my mail.app and my iphone are both checking the pop 3 server.

    Probably most of these 300+ tracks are sourced from a single general location which cannot be accessed or found on your new computer configuration. Right-click on several of the exclamation mark-ed tracks, choose Get Info. The location will be revealed at the very bottom of the newly opened window after "Where:".
    You can try to fix iTunes exclamation for some or all of these tracks with a third-party app. Despite that it is still in beta it managed to find some of my missing songs in my library.

  • HT201413 I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.

    I have ipod 4 i want to sync the device to my pc through Itunes by the sync selection to my iTunes at PC were disable cause even the device are not appearing on iTunes PC but the iPod was connected to my PC how I can be able to fix this.

    Hi there,
    If you are experiencing an issues where iTunes is not recognizing your iPod, then I would recommend taking a look at the article below.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    -Griff W.

  • What is the best Compressor setting for best quality video playback on an iBook g4?

    I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
    I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
    The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
    This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
    Any suggestions are greatly appreciated! Thanks!

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • What is the best compressor setting to use ... when exporting a 720p timeline from FCP for a project that will only be played back in a standard def monitor?

    What is the best compressor setting to use for DVD StudioPro ... when exporting a 720p 30 timeline from FCP for a project that will only be viewed in a standard def monitor?

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • My apple id is not set with itunes store

    hello my apple id is not set with itunes

    What do you mean 'not set with itunes' ?
    If you mean that you are getting message that it needs to reviewed then you can do so by tapping on it in Settings > iTunes & App Store on your phone, or via the Store > View Account menu option on your computer's iTunes. You will probably need to enter credit card details.
    If you mean something else ... ?

  • What is the best export setting from QuickTime Pro 7 for standard DVD

    I have several AVI movies I took and want to import them into iMovie, so I can create a DVD that will play in any DVD player or computer. (Along with a bunch of pictures.)
    Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
    I have export them using *_QuickTime 10_* and QTP7 to *MOV, MP4, & M4V* and the output is *+bad bad bad+*.
    I have tried both export and save-as. Neither has done a good job.
    The internal information of the AVI movies are: (as reported by QT)
    Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
    I have used several settings with not much luck including:
    AAC, Stereo (L R), 44.100 kHz, MPEG-4 (Perian), 640 x 480, Millions
    MPEG-4 Video, H.264
    Should I be using a better application then QuickTime?
    Is there a way to just use iDVD with the original AVI movies?
    These are wedding movies and pictures that people are waiting for.

    Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
    That depends on your specific work flow and the codec(s) involved. Generally speaking, if the file plays in the QT Player and is "conversion" compatible, then the file can be added directly to iDVD (i.e., unlike iMovie '08/'09/'11 which requires the file to be "edit" compatible with QT).
    I have export them using QuickTime 10 and QTP7 to MOV, MP4, & M4V and the output is bad bad bad.
    The quality of your output file will depend on a number of things: primarily the quality of your source file, the efficiency of the target codec, and the specific settings used. (About which you did not elaborate.) The rule of thumb here is that your output will never be better than your input and each re-comprssion of the data has the potential to degrade the quality to some degree.
    I have tried both export and save-as. Neither has done a good job.
    The "Export" option re-compresses the data while the "Save As..." option only places the original data in an MOV file container. So if this output is "bad, bad, bad," then I suspect your source file(s) are not of high quality to begin with. (This seems to be confirmed by the very low audio sampling rate which implies the video data rate was probably also low to conserve file storage space.)
    The internal information of the AVI movies are: (as reported by QT)... Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
    The basic codecs here appear to be both playback and conversion compatitible with QT (other than the very low sampling rate which some QT apps may not like). Thus, if your work flow is to simply burn DVDs that can be played on commercial players, the AVI could most likely be dropped to iDVD for authoring. On the other hand, if you are editing in a recent version of iMovie, then that app may not like the AVI file container. In this case, the best quality you can likely expect would be to use the "Save As..." option to place the data in an MOV file container and import to iMovie.
    Unfortunately, editing in iMovie '08/'09/'11 is done "by reference" which means your output file will be created by exporting the impoted source data to another compression format. The default would be H.264/AAC which is a highly compressed format which in turn would be re-compressed again by iDVD to multiplexed MPEG2/PCM content further reducing quality by using a less efficient video codec. My recommendation for export from iMovie in this case would be AIC/Linear PCM. (I.e., to export your edits to the Apple intermediat video codec using the original file size and frame rate with just a bit of "sharpening" and using 16-bit/48 kHz Linear PCM audio (which is what will be used to create the DVD).
    Should I be using a better application then QuickTime?
    How much are you willing to spend?
    Is there a way to just use iDVD with the original AVI movies?
    Yes. Simply create a new SD project, select your theme, drop the compatible AVI content to the appropriate "drop" area(s), add photos as desired, preview the results, and author the DVD if/when satisfied.

  • HT201210 What does the do not disturb selecton mean? under settings

    What does the 'do not disturb' selection mean under settings?

    It allows you to not be disturbed by calls, messages, E-Mail notifications, etc. You can also set it for certain times, like from 10:30pm to 6am

  • What is the use of setting null values to Objects?

    What is the use of setting null values to Objects?
    regards,
    namanc

    It's more of a safety trap within java to handle the "programmers are still humans" exception.
    String myname;
    // print what???? Forgot to initialize the name!
    System.out.println(myname);Java will complain about myname not being initialized. It won't when you do this:
    String myname = null;
    // allright, your name is null
    System.out.println(myname);In the second case you are showing to java that you know what you are doing.

  • What is the best export setting for video on blogger

    What is the best export setting for video from premeire to blogger.com or blogspot.com

    I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

  • Re: (forte-users) Ok, what's the "secret" for setting serverside envi

    Dear Robinson,
    It seems to be that you have 2 ways of solving the problem:
    1) restart forte after setting the environment variables
    2) write a little application which sets the required variables, using
    the task.part.OperatingSystem.SetEnv(name,value) method.
    If you have to chage the variables rarely, then it`s easier to restart forte,
    otherwise I would suggest to use the SetEnv function...
    Best Regards,
    Tamas Deak
    "Robinson, Richard" wrote:
    Subject says it all.
    We have a bunch of environment variables that are used by the server side
    objects. What I want to do is change the value of some of the variables
    prior to running my application in Forte Development IDE (3.0.G.2). I've
    tried to set the environment variables via NT's registry, but it appears
    that at execution time the variables take on the value of whatever they are
    for the node manager.
    Most IDE's I've worked with before have a way to specify environment
    variables right in the tool. Forte doesn't appear to have that capability -
    say it ain't so!
    Any clues?
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]
    Tamas Deak
    Lufthansa Systems Hungary
    (forte developer)
    2-6 Mazsa ter, Budapest, 1107, HUNGARY
    (36-1) 4312 973
    [email protected]
    [email protected][email protected]-

    Richard,
    There is no way of changing the environment variable once the Node
    Manager is up. You will have to shutdown the node manager and then restart
    it to have the new environment variables take effect. Sorry, there is no
    secret way of doing this that I know of.
    But you can set the variables on you development machine and run you
    application without distributing. This way the partition will be running in
    your client machine and not the server.
    Another way we have also got around this is by having a special
    environment variable on the client side that opens a admin screen when you
    run you application. This admin screen will allow you to change the
    environment variables and then set them on the server partition. You will
    have to do come coding on the server to make this happen but if you are
    using a framework then it should be easy. We call this developer reconnect
    facility. It only can be activated by the special client side environment
    variable. I comes in very handy when we are development and want to change
    the database on the server partition.
    Hope this help.
    ka
    Kamran Amin
    Framework, Inc.
    303 South Broadway
    Tarrytown, NY 10591
    (914) 631-2322x121
    [email protected]
    http://www.frameworkinc.com/
    -----Original Message-----
    From: Robinson, Richard [mailto:[email protected]]
    Sent: Thursday, November 04, 1999 7:23 AM
    To: [email protected]
    Subject: (forte-users) Ok, what's the "secret" for setting server side
    environment varia bles when running in the Forte Development
    Environment?
    Subject says it all.
    We have a bunch of environment variables that are used by the server side
    objects. What I want to do is change the value of some of the variables
    prior to running my application in Forte Development IDE (3.0.G.2). I've
    tried to set the environment variables via NT's registry, but it appears
    that at execution time the variables take on the value of whatever they are
    for the node manager.
    Most IDE's I've worked with before have a way to specify environment
    variables right in the tool. Forte doesn't appear to have that capability -
    say it ain't so!
    Any clues?
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]

  • What is the,  iPad2 VPN setting for "transmit ALL data stream" equivalent in PC VPN?

    What is the,
    iPad2  VPN setting for "transmit ALL data stream" equivalent setting in PC VPN?
    Thanks.
    Or there is not equivalent part?
    -namlow

    Great question, Aerogoob.
    The XY graph can be bound to a 1d array of "points", where each point is a cluster of two numerics (X and Y). To create a shared variable of this type, you can set the data type to "From Custom Control..." in the shared variable properties dialog. Of course, first you'll have to build the custom control of the correct type: array of cluster of two numerics.
    If any of that doesn't make sense, please post back and we can walk you through it in more detail.
    Also, just for completeness, the chart indicator can be bound to a scalar numeric or to an array of numerics. The graph indicator can only be bound to an array of numerics.

  • What is the best compressor setting for dvds

    What is the best compressor setting for dvds that is not for HD dvd players? I used "DVD Best quality 90 min" and changed the GOP setting to 7.5 and my dvd looks terrible. the text is blurry and the colors are bad.

    correction the bit rate is 7.5

Maybe you are looking for